What/Why I did:
Update Broadcom SAI debian package. New Package has following changes:
CaseCS00012248135: Fix shows error message "linux-bcm-knet: Fatal error: Incomplete chain" followed by malformed LACP/LLDP packets
Updated Broadcom SAI Debian package to 3.7.6.1 Following are the major changes here:
- CS00011651922/CS00012192502 SID:Parity error in TDM Calendar memories causes traffic drop after SER correction
- CS00011222060 soc_mem_alpm_delete: unit 0: ALPM delete operation[L3_DEFIP_ALPM_IPV6_128] encountered parity error
- Cesto Phy Recovery enhancement.
- SDK compile with flag -DBCM_MONOTONIC_TIME and -DBCM_MONOTONIC_MUTEXES
This is to address the issue when "mmuconfig -p egress_lossy_profile" is executed which causes SYNCd failure with SAI_STATUS_INSUFFICIENT_RESOURCE for attr SAI_BUFFER_PROFILE_ATTR_RESERVED_BUFFER_SIZE.
This change also requires the change from (https://github.com/Azure/sonic-swss/pull/1649)
This SAI change was already tested as part of the (https://github.com/Azure/sonic-swss/pull/1649) PR.
when parallel build is enabled, both docker-fpm-frr and docker-syncd-brcm
is built at the same time, docker-fpm-frr requires swss which requires to
install libsaivs-dev. docker-syncd-brcm requires syncd package which requires
to install libsaibcm-dev.
since libsaivs-dev and libsaibcm-dev install the sai header in the same
location, these two packages cannot be installed at the same time. Therefore,
we need to serialize the build between these two packages. Simply uninstall
the conflict package is not enough to solve this issue. The correct solution
is to have one package wait for another package to be uninstalled.
For example, if syncd is built first, then it will install libsaibcm-dev.
Meanwhile, if the swss build job starts and tries to install libsaivs-dev,
it will first try to query if libsaibcm-dev is installed or not. if it is
installed, then it will wait until libsaibcm-dev is uninstalled. After syncd
job is finished, it will uninstall libsaibcm-dev and swss build job will be
unblocked.
To solve this issue, _UNINSTALLS is introduced to uninstall a package that
is no longer needed and to allow blocked job to continue.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
backport c4b5b002c3
make swss build depends only on libsairedis instead of syncd. This allows to build swss without depending
on vendor sai library.
Currently, libsairedis build also buils syncd which requires vendor SAI lib. This makes difficult to build
swss docker in buster while still keeping syncd docker in stretch, as swss requires libsairedis which also
build syncd and requires vendor to provide SAI for buster. As swss docker does not really contain syncd
binary, so it is not necessary to build syncd for swss docker.
[submodule]: update sonic-sairedis
1e42517996bfe41ac58d4c25ee3f93502befcb9d (HEAD -> 201911) [build]: add option to build without syncd
Signed-off-by: Guohan Lu <lguohan@gmail.com>
* Broadcom SAI 3.7.5.2, with the fixes for following CSP's
e5e06f4 Fix for CS00010914668(KB0029456/SDK-218585) and CS00010503275(KB0029315/SDK-213475)
cf4f8da Solution for CS00010775359 in 3.7
0348f03 Patch for CS00010897814
a2d2fdd Patch for CS00010817763
4d362e8 Patch for CS00010636736
557ddc6 Solution for CS00010443542
0f122f1 Port SDK SER fix for dynamic tables (SDK-175398 / SDK-221245) to SAI 3.7
37e5c5e Fix for CS00010790550
64daf8a Fix for CS00010726597
e7f000e Fix for CS00010697761
44b7ab3 Solution for CS00010617498.
1475c24 CSP10503275 request to pull KB0029314 into 3.7
Verified after loading on TH platforms cpu usage gone down:
Previous:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2521 root 20 0 1512860 360452 63540 S 144.6 4.4 8:00.03 syncd
After Fix:
7500 root 20 0 1592420 350912 64184 S 45.4 4.3 3:50.99 syncd
* Remove the divide by 4 operation to the under the hood SAI
This is to avoid the need and thus the confusion for application program to know
the mmu internal architecture
This change must have support from SAI change to reach the correct
config
Signed-off-by: Wenda <wenni@microsoft.com>
* Relegate the divide by 4 operation to the under the hood SAI for egress
lossless pool
Extend to 7060 and 6100
Signed-off-by: Wenda <wenni@microsoft.com>
* Add more TH/TH2 hwskus
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Update config test
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Add TH2 ingress lossy profile
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Move the divide by 4 operation to SAI internal
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* [bcm SAI] Upgrade Broadcom SAI to version 3.5.3.1-15
- Broadcom SAI 3.5 GA release 20190924.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
- Include helix4 fix.
- Include support for TD2 56854.
- Add dummy support for SAI_PORT_ATTR_ADVERTISED_SPEED.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [Broadcom SAI] upgrade Broadcom SAI to version 3.1.3.4-9
Includes configuration files for following devices:
- Quanta 1X1B-32X
- Dell Z9264F
- Inventec D7054Q28B and D7032Q28B
* [bcm sai] upgrade sai version to 3.1.3.4-10
include configuration change to 7060 T0.
