**- What I did**
#### wheel package Makefiles
- wheel package Makefiles for sonic-yang-mgmt package.
#### libyang Python APIs:
- python APIs based on libyang
- functions to load/merge yang models and Yang data files
- function to validate data trees based on Yang models
- functions to merge yang data files/trees
- add/set/delete node in schema and data trees
- find data/schema nodes from xpath from the Yang data/schema tree in memory
- find dependencies
- dump the data tree in json/xml
#### Extension of libyang Python APIs:
-- Cropping input config based on Yang Model.
-- Translate input config based on Yang Model.
-- rev Translate input config based on Yang Model.
-- Find xpath of port, portleaf and a yang list.
-- Find if node is key of a list while deletion if yes, then delete the parent.
Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com
Signed-off-by: Ping Mao pmao@linkedin.com
- bug fix : Fixed an issue which the nps ko file was not loaded due to the wrong service file name
- Optimize the code to reduce changes due to the kernel upgrade
- Remove nephos ko file loaded in swss.service.j2 because it has loaded at syncd.service.j2
* Changes for LLDP for Multi NPU Platoforms:-
a) Enable LLDP for Host namespace for Management Port
b) Make sure Management IP is avaliable in per asic namespace
needed for LLDP Chassis configuration
c) Make sure chassis mac-address is correct in per asic namespace
d) Do not run lldp on eth0 of per asic namespace and avoid chassis
configuration for same
e) Use Linux hostname instead from Device Metadata for lldp chassis
configuration since in multi-npu platforms device metadata hostname
will be differnt
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comment with following changes:
a) Use Device Metadata hostname even in per namespace conatiner.
updated minigraph parsing for same to have hostname as system
hostname and add new key for asic name
b) Minigraph changes to have MGMT_INTERFACE Key in per asic/namespace
config also as needed for LLDP for setting chassis management IP.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments
Dynamic threshold setting changed to 0 and WRED profile green min threshold set to 250000 for Tomahawk devices
Changed the dynamic threshold settings in pg_profile_lookup.ini
Added a macro for WRED profiles in qos.json.j2 for Tomahawk devices
Necessary changes made in qos.config.j2 to use the macro if present
Signed-off-by: Neetha John <nejo@microsoft.com>
* Multi DB with namespace support, Introducing the database_global.json file
for supporting accessing DB's in other namespaces for service running in
linux host
* Updates based on comments
* Adding the j2 templates for database_config and database_global files.
* Updating to retrieve the redis DIR's to be mounted from database_global.json file.
* Additional check to see if asic.conf file exists before sourcing it.
* Updates based on PR comments discussion.
* Review comments update
* Updates to the argument "-n" for namespace used in both context of parsing minigraph and multi DB access.
* Update with the attribute "persistence_for_warm_boot" that was added to database_config.json file earlier.
* Removing the database_config.json file to avioid confusion in future.
We use the database_config.json.j2 file to generate database_config.json files dynamically.
* Update the comments for sudo usage in docker_image_ctrl.j2
* Update with the new logic in PING PONG tests using sonic-db-cli. With this we wait till the
PONG response is received when redis server is up.
* Similar changes in swss and syncd scripts for the PING tests with sonic-db-cli
* Updated with a missing , in the database_config.json.j2 file, Do pip install of j2cli in docker-base-buster.
currently, vs docker always create 32 front panel ports.
when vs docker starts, it first detects the peer links
in the namespace and then setup equal number of front panel
interfaces as the peer links.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
do mount/umount in the chroot environment
install cron explicitly
install rasdaemon as a replacement for mcelog
switch python package docker-py to docker
[sonic-yang-models]: First version of yang models for Port, VLan, Interface, PortChannel, loopback and ACL.
YANG models as per Guidelines.
Guideline doc: https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md
[sonic-yang-models/tests]: YANG model test code and JSON input for testing.
[sonic-yang-models/setup.py]: Build infra for yang models.
**- What I did**
Created Yang model for Sonic.
Tables: PORT, VLAN, VLAN_INTERFACE, VLAN_MEMBER, ACL_RULE, ACL_TABLE, INTERFACE.
Created build infra files using which a new package (sonic-yang-models) can be build and can be deployed on sonic switches. Yang models will be part of this new package.
**- How I did it**
Wrote yang models based on Guideline doc:
https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md
and
https://github.com/Azure/SONiC/wiki/Configuration.
Wrote python wheel Package infra which runs test for these Yang models using a json files which consists configuration as per yang models. These configs are for negative tests, which means we want to test that most must condition, pattern and when condition works as expected.
**- How to verify it**
Build Logs and testing:
———————————————————————————————————
```
/sonic/src/sonic-yang-models /sonic
running test
running egg_info
writing top-level names to sonic_yang_models.egg-info/top_level.txt
writing dependency_links to sonic_yang_models.egg-info/dependency_links.txt
writing sonic_yang_models.egg-info/PKG-INFO
reading manifest file 'sonic_yang_models.egg-info/SOURCES.txt'
writing manifest file 'sonic_yang_models.egg-info/SOURCES.txt'
running build_ext
----------------------------------------------------------------------
Ran 0 tests in 0.000s
OK
running bdist_wheel
running build
running build_py
(Reading database ... 155852 files and directories currently installed.)
Preparing to unpack .../libyang_1.0.73_amd64.deb ...
Unpacking libyang (1.0.73) over (1.0.73) ...
Setting up libyang (1.0.73) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
Processing triggers for man-db (2.7.6.1-2) ...
(Reading database ... 155852 files and directories currently installed.)
Preparing to unpack .../libyang-cpp_1.0.73_amd64.deb ...
Unpacking libyang-cpp (1.0.73) over (1.0.73) ...
Setting up libyang-cpp (1.0.73) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
(Reading database ... 155852 files and directories currently installed.)
Preparing to unpack .../python3-yang_1.0.73_amd64.deb ...
Unpacking python3-yang (1.0.73) over (1.0.73) ...
Setting up python3-yang (1.0.73) ...
INFO:YANG-TEST:module: sonic-vlan is loaded successfully
ERROR:YANG-TEST:Could not get module: sonic-head
INFO:YANG-TEST:module: sonic-portchannel is loaded successfully
INFO:YANG-TEST:module: sonic-acl is loaded successfully
INFO:YANG-TEST:module: sonic-loopback-interface is loaded successfully
ERROR:YANG-TEST:Could not get module: sonic-port
INFO:YANG-TEST:module: sonic-interface is loaded successfully
INFO:YANG-TEST:
------------------- Test 1: Configure a member port in VLAN_MEMBER table which does not exist.---------------------
libyang[0]: Leafref "/sonic-port:sonic-port/sonic-port:PORT/sonic-port:PORT_LIST/sonic-port:port_name" of value "Ethernet156" points to a non
-existing leaf. (path: /sonic-vlan:sonic-vlan/VLAN_MEMBER/VLAN_MEMBER_LIST[vlan_name='Vlan100'][port='Ethernet156']/port)
INFO:YANG-TEST:Configure a member port in VLAN_MEMBER table which does not exist. Passed
INFO:YANG-TEST:
------------------- Test 2: Configure non-existing ACL_TABLE in ACL_RULE.---------------------
libyang[0]: Leafref "/sonic-acl:sonic-acl/sonic-acl:ACL_TABLE/sonic-acl:ACL_TABLE_LIST/sonic-acl:ACL_TABLE_NAME" of value "NOT-EXIST" points
to a non-existing leaf. (path: /sonic-acl:sonic-acl/ACL_RULE/ACL_RULE_LIST[ACL_TABLE_NAME='NOT-EXIST'][RULE_NAME='Rule_20']/ACL_TABLE_NAME)
INFO:YANG-TEST:Configure non-existing ACL_TABLE in ACL_RULE. Passed
INFO:YANG-TEST:
------------------- Test 3: Configure IP_TYPE as ARP and ICMPV6_CODE in ACL_RULE.---------------------
libyang[0]: When condition "boolean(IP_TYPE[.='ANY' or .='IP' or .='IPV6' or .='IPv6ANY'])" not satisfied. (path: /sonic-acl:sonic-acl/ACL_RU
LE/ACL_RULE_LIST[ACL_TABLE_NAME='NO-NSW-PACL-V4'][RULE_NAME='Rule_40']/ICMPV6_CODE)
INFO:YANG-TEST:Configure IP_TYPE as ARP and ICMPV6_CODE in ACL_RULE. Passed
INFO:YANG-TEST:
INFO:YANG-TEST:
------------------- Test 4: Configure IP_TYPE as ipv4any and SRC_IPV6 in ACL_RULE.---------------------
libyang[0]: When condition "boolean(IP_TYPE[.='ANY' or .='IP' or .='IPV6' or .='IPv6ANY'])" not satisfied. (path: /sonic-acl:sonic-acl/ACL_RU
LE/ACL_RULE_LIST[ACL_TABLE_NAME='NO-NSW-PACL-V4'][RULE_NAME='Rule_20']/SRC_IPV6)
INFO:YANG-TEST:Configure IP_TYPE as ipv4any and SRC_IPV6 in ACL_RULE. Passed
------------------- Test 5: Configure l4_src_port_range as 99999-99999 in ACL_RULE---------------------
libyang[0]: Value "99999-99999" does not satisfy the constraint "([0-9]{1,4}|[0-5][0-9]{4}|[6][0-4][0-9]{3}|[6][5][0-2][0-9]{2}|[6][5][3][0-5]{2}|[6][5][3][6][0-5])-([0-9]{1,4}|[0-5][0-9]{4}|[6][0-4][0-9]{3}|[6][5][0-2][0-9]{2}|[6][5][3][0-5]{2}|[6][5][3][6][0-5])" (range, length, or pattern). (path: /sonic-acl:sonic-acl/ACL_RULE/ACL_RULE_LIST[ACL_TABLE_NAME='NO-NSW-PACL-V6'][RULE_NAME='Rule_20']/L4_SRC_PORT_RANGE)
INFO:YANG-TEST:Configure l4_src_port_range as 99999-99999 in ACL_RULE Passed
INFO:YANG-TEST:
------------------- Test 6: Configure empty string as ip-prefix in INTERFACE table.---------------------
libyang[0]: Invalid value "" in "ip-prefix" element. (path: /sonic-interface:sonic-interface/INTERFACE/INTERFACE_LIST[interface='Ethernet8'][ip-prefix='']/ip-prefix)
INFO:YANG-TEST:Configure empty string as ip-prefix in INTERFACE table. Passed
INFO:YANG-TEST:
------------------- Test 7: Configure Wrong family with ip-prefix for VLAN_Interface Table---------------------
libyang[0]: Must condition "(contains(../ip-prefix, ':') and current()='IPv6') or (contains(../ip-prefix, '.') and current()='IPv4')" not satisfied. (path: /sonic-vlan:sonic-vlan/VLAN_INTERFACE/VLAN_INTERFACE_LIST[vlanid='100'][ip-prefix='2a04:5555:66:7777::1/64']/family)
INFO:YANG-TEST:Configure Wrong family with ip-prefix for VLAN_Interface Table Passed
INFO:YANG-TEST:
------------------- Test 8: Configure IP_TYPE as ARP and DST_IPV6 in ACL_RULE.---------------------
libyang[0]: When condition "boolean(IP_TYPE[.='ANY' or .='IP' or .='IPV6' or .='IPV6ANY'])" not satisfied. (path: /sonic-acl:sonic-acl/ACL_RULE/ACL_RULE_LIST[ACL_TABLE_NAME='NO-NS
W-PACL-V6'][RULE_NAME='Rule_20']/DST_IPV6)
INFO:YANG-TEST:Configure IP_TYPE as ARP and DST_IPV6 in ACL_RULE. Passed
INFO:YANG-TEST:
------------------- Test 9: Configure INNER_ETHER_TYPE as 0x080C in ACL_RULE.---------------------
libyang[0]: Value "0x080C" does not satisfy the constraint "(0x88CC|0x8100|0x8915|0x0806|0x0800|0x86DD|0x8847)" (range, length, or pattern). (path: /sonic-acl:sonic-acl/ACL_RULE/ACL_RULE_LIST[ACL_TABLE_NAME='NO-NSW-PACL-V4'][RULE_NAME='Rule_40']/INNER_ETHER_TYPE)
INFO:YANG-TEST:Configure INNER_ETHER_TYPE as 0x080C in ACL_RULE. Passed
INFO:YANG-TEST:
------------------- Test 10: Add dhcp_server which is not in correct ip-prefix format.---------------------
libyang[0]: Invalid value "10.186.72.566" in "dhcp_servers" element. (path: /sonic-vlan:sonic-vlan/VLAN/VLAN_LIST/dhcp_servers[.='10.186.72.566'])
INFO:YANG-TEST:Add dhcp_server which is not in correct ip-prefix format. Passed
INFO:YANG-TEST:
------------------- Test 11: Configure undefined acl_table_type in ACL_TABLE table.---------------------
libyang[0]: Invalid value "LAYER3V4" in "type" element. (path: /sonic-acl:sonic-acl/ACL_TABLE/ACL_TABLE_LIST[ACL_TABLE_NAME='NO-NSW-PACL-V6']/type)
INFO:YANG-TEST:Configure undefined acl_table_type in ACL_TABLE table. Passed
INFO:YANG-TEST:
------------------- Test 12: Configure undefined packet_action in ACL_RULE table.---------------------
libyang[0]: Invalid value "SEND" in "PACKET_ACTION" element. (path: /sonic-acl:sonic-acl/ACL_RULE/ACL_RULE_LIST/PACKET_ACTION)
INFO:YANG-TEST:Configure undefined packet_action in ACL_RULE table. Passed
INFO:YANG-TEST:
------------------- Test 13: Configure wrong value for tagging_mode.---------------------
libyang[0]: Invalid value "non-tagged" in "tagging_mode" element. (path: /sonic-vlan:sonic-vlan/VLAN_MEMBER/VLAN_MEMBER_LIST/tagging_mode)
INFO:YANG-TEST:Configure wrong value for tagging_mode. Passed
INFO:YANG-TEST:
------------------- Test 14: Configure vlan-id in VLAN_MEMBER table which does not exist in VLAN table.---------------------
libyang[0]: Leafref "../../../VLAN/VLAN_LIST/vlanid" of value "200" points to a non-existing leaf. (path: /sonic-vlan:sonic-vlan/VLAN_MEMBER/VLAN_MEMBER_LIST[vlanid='200'][port='Ethernet0']/vlanid)
libyang[0]: Leafref "../../../VLAN/VLAN_LIST/vlanid" of value "200" points to a non-existing leaf. (path: /sonic-vlan:sonic-vlan/VLAN_MEMBER/VLAN_MEMBER_LIST[vlanid='200'][port='Ethernet0']/vlanid)
INFO:YANG-TEST:Configure vlan-id in VLAN_MEMBER table which does not exist in VLAN table. Passed
INFO:YANG-TEST:All Test Passed
../../target/debs/stretch/libyang0.16_0.16.105-1_amd64.deb installtion failed
../../target/debs/stretch/libyang-cpp0.16_0.16.105-1_amd64.deb installtion failed
../../target/debs/stretch/python2-yang_0.16.105-1_amd64.deb installtion failed
YANG Tests passed
Passed: pyang -f tree ./yang-models/*.yang > ./yang-models/sonic_yang_tree
copying tests/yangModelTesting.py -> build/lib/tests
copying tests/test_sonic_yang_models.py -> build/lib/tests
copying tests/__init__.py -> build/lib/tests
running egg_info
writing top-level names to sonic_yang_models.egg-info/top_level.txt
writing dependency_links to sonic_yang_models.egg-info/dependency_links.txt
writing sonic_yang_models.egg-info/PKG-INFO
reading manifest file 'sonic_yang_models.egg-info/SOURCES.txt'
writing manifest file 'sonic_yang_models.egg-info/SOURCES.txt'
installing to build/bdist.linux-x86_64/wheel
running install
running install_lib
creating build/bdist.linux-x86_64/wheel
creating build/bdist.linux-x86_64/wheel/tests
copying build/lib/tests/yangModelTesting.py -> build/bdist.linux-x86_64/wheel/tests
copying build/lib/tests/test_sonic_yang_models.py -> build/bdist.linux-x86_64/wheel/tests
copying build/lib/tests/__init__.py -> build/bdist.linux-x86_64/wheel/tests
running install_data
creating build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data
creating build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data
creating build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-head.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-acl.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-interface.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-loopback-interface.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-port.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-portchannel.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-vlan.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
```
* Install kubernetes worker node packages, if enabled.
* Minor updates
* Added some comments
* Updates per review comments.
Built a private image to test to work fine.
* Remove the removed file.
* Update per comments
Make a fix, as kubeadm no demands a higher version of kubelet & kubectl.
As kubeadm auto install kubectl & kubelet, removing explicit install is an easier/robust fix.
* Changes per review comments.
* Updates per comments.
1) Dropped helper & pod scripts
2) Made install verbose
* Drop creation of pods subdir, as this PR does not use them.
* From comments to 'n' per review comments.
* 1) kubeadm.conf is created as part of kubeadm package install. Hence dropped explicit copy.
Take advantage of an SDK environment variable to customize the location where sdk_socket exists.
In the latest SDK sdk_socket has been moved from /tmp to /var/run which is a better place to contain this kind of file.
However, this prevents the subdirs under /var/run from being mapped to different volumes. To resolve this, we take advantage of an SDK variable to designate the location of sdk_socket.
This requires every process that requires to access sdk_socket have this environment variable defined. However, to define environment variable for each process is less scalable. We take advantage of the docker scope environment variable to avoid that.
It depends on PR 4227
Instead of updating hostname manualy on Config DB hostname change,
simply share containers UTS namespace with host OS.
Ideally, instead of setting `--uts=host` for every container in SONiC,
this setting can be set per container if feature requires.
One behaviour change is introduced in this commit, when `--privileged`
or `--cap-add=CAP_SYS_ADMIN` and `--uts=host` are combined, container
has privilege to change host OS and every other container hostname.
Such privilege should be fixed by limiting containers capabilities.
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
This patch upgrade the kernel from version
4.9.0-9-2 (4.9.168-1+deb9u3) to 4.9.0-11-2 (4.9.189-3+deb9u2)
Co-authored-by: rajendra-dendukuri <47423477+rajendra-dendukuri@users.noreply.github.com>
* [database] Implement the auto-restart feature for database container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [database] Remove the duplicate dependency in service files. Since we
already have updategraph ---> config_setup ---> database, we do not need
explicitly add database.service in all other container service files.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [event listener] Reorganize the line 73 in event listener script.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [database] update the file sflow.service.j2 to remove the duplicate
dependency.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [event listener] Add comments in event listener.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [event listener] Update the comments in line 56.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [event listener] Add parentheses for if statement in line 76 in event listener.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [init_cfg.json] Add a new table CONTAINER_FEATURE.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [init_cfg.json] Update the content of table CONTAINER_FEATURE.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [init_cfg.json] Use the template to generate the table
CONTAINER_FEATURE.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [init_cfg.json] Add a new table FEATURE.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [init_cfg.json] Change the order of container names according to
alphabetical order.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [init_cfg.json] Change the dhcp_relay container name and add rest-api.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Changes in sonic-buildimage for the NAT feature
- Docker for NAT
- installing the required tools iptables and conntrack for nat
Signed-off-by: kiran.kella@broadcom.com
* Add redis-tools dependencies in the docker nat compilation
* Addressed review comments
* add natsyncd to warm-boot finalizer list
* addressed review comments
* using swsscommon.DBConnector instead of swsssdk.SonicV2Connector
* Enable NAT application in docker-sonic-vs
as the current kdump installation is searching for grub path, and ARM arch (marvell-armhf) are dependent on uboot, these changes has to be addressed. For now skipping kdump installation on ARM
Co-authored-by: lguohan <lguohan@gmail.com>
- move single instance services into their own folder
- generate Systemd templates for any multi-instance service files in slave.mk
- detect single or multi-instance platform in systemd-sonic-generator based on asic.conf platform specific file.
- update container hostname after creation instead of during creation (docker_image_ctl)
- run Docker containers in a network namespace if specified
- add a service to create a simulated multi-ASIC topology on the virtual switch platform
Signed-off-by: Lawrence Lee <t-lale@microsoft.com>
Signed-off-by: Suvarna Meenakshi <Suvarna.Meenaksh@microsoft.com>
* [MultiDB] (except ./src and ./dockers dirs): replace redis-cli with sonic-db-cli and use new DBConnector
* update comment for a potential bug
* update comment
* add TODO maker as review reqirement
When database service is down, psud daemon throws an error because of DB connection reset, this because pmon service has no dependency with database service.
To resolve this issue, added database service dependency to the pmon service.
Also, increased the net.core.somaxconn value to 512 to solve the connection failure on the scaled setup.
* Updates per review comments
1) core_uploader service waits for syslog.service
2) core_uploader service enabled for restart on failure
3) Use mtime instead of file size + ample time to be robust.
* Avoid reloading already uploaded file, by marking the names with a prefix.
* Updated failing path.
1) If rc file is missing or required data missing, it periodically logs error in forever loop.
2) If upload fails, retry every hour with a error log, forever.
* Fix few bugs
* The binary update_json.py will come from sonic-utilities.
* Added sonic-mgmt-framework as submodule / docker
* fix build issues
* update sonic-mgmt-framework submodule branch to master
* Merged changes 70007e6d2ba3a4c0b371cd693ccc63e0a8906e77..00d4fcfed6a759e40d7b92120ea0ee1f08300fc6
00d4fcfed6a759e40d7b92120ea0ee1f08300fc6 Modified environemnt variables
* Changes to build sonic-mgmt-framework docker
* bumped up sonic-mgmt-framework commit-id
* version bump for sonic-mgmt-framework commit-it
* bumped up sonic-mgmt-framework commit-id
* Add python packages to docker
* Build fix for docker with python packages
* added libyang as dependent package
* Allow building images on NFS-mounted clones
Prior to this change, `build_debian.sh` would generate a Debian
filesystem in `./fsroot`. This needs root permissions, and one of the
tests that is performed is whether the user can create a character
special file in the filesystem (using mknod).
On most NFS deployments, `root` is the least privileged user, and cannot
run mknod. Also, attempting to run commands like rm or mv as root would
fail due to permission errors, since the root user gets mapped to an
unprivileged user like `nobody`.
This commit changes the location of the Debian filesystem to `/fsroot`,
which is a tmpfs mount within the slave Docker. The default squashfs,
docker tarball and zip files are also created within /tmp, before being
copied back to /sonic as the regular user.
The side effect of this change is that the contents of `/fsroot` are no
longer available once the slave container exits, however they are
available within the squashfs image.
Signed-off-by: Nirenjan Krishnan <Nirenjan.Krishnan@dell.com>
* bumped up sonc-mgmt-framework commit to include PR #18
* REST Server startup script is enahnced to read the settings from
ConfigDB. Below table provides mapping of db field to command line
argument name.
============================================================
ConfigDB entry key Field name REST Server argument
============================================================
REST_SERVER|default port -port
REST_SERVER|default client_auth -client_auth
REST_SERVER|default log_level -v
DEVICE_METADATA|x509 server_crt -cert
DEVICE_METADATA|x509 server_key -key
DEVICE_METADATA|x509 ca_crt -cacert
============================================================
* Replace src/telemetry as submodule to sonic-telemetry
* Update telemetry commit HEAD
* Update sonic-telemetry commit HEAD
* libyang env path update
* Add libyang dependency to telemetry
* Add scripts to create JSON files for CLI backend
Scripts to create /var/platform/syseeprom and /var/platform/system, which are back-end
files for CLI, for system EEPROM and system information.
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* In startup script, create directory where CLI back-end files live
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* build dependency pkgs added to docker for build failure fix
* Changes to fix build issue for mgmt framework
* Fix exec path issue with telemetry
* s5232[device] PSU detecttion and default led state support
* Processing of first boot in rc.local should not have premature exit
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* docker mount options added for platform, system features
* bumped up sonic-mgmt-framework commit id to pick 23rd July 2019 changes
* Added mount options for telemetry docker to get access for system and platform info.
* Update commit for sonic-utilities
* [dell]: Corrected dport map and renamed config files for S5232F
* Fix telemetry submodule commit
* added support for sonic-cli console
* [Dell S5232F, Z9264F] Harden FPGA driver kernel module
For Dell S5232F and Z9264F platforms, be more strict when checking state
in ISR of FPGA driver, to harden against spurious interrupts.
Signed-off-by: Howard Persh <Howard_Persh@dell.com>
* update mgmt-framework submodule to 27th Aug commit.
* remove changes not related to mgmt-framework and sonic-telemetry
* Revert "Replace src/telemetry as submodule to sonic-telemetry"
This reverts commit 11c3192975.
* Revert "Replace src/telemetry as submodule to sonic-telemetry"
This reverts commit 11c3192975.
* make submodule changes and remove a change not related to PR
* more changes
* Update .gitmodules
* Update Dockerfile.j2
* Update .gitmodules
* Update .gitmodules
* Update .gitmodules
reverting experimental change
* Removed syspoll for release_1.0
Signed-off-by: Jeff Yin <29264773+jeff-yin@users.noreply.github.com>
* Update docker-sonic-mgmt-framework.mk
* Update sonic-mgmt-framework.mk
* Update sonic-mgmt-framework.mk
* Update docker-sonic-mgmt-framework.mk
* Update docker-sonic-mgmt-framework.mk
* Revert "Processing of first boot in rc.local should not have premature exit"
This reverts commit e99a91ffc2.
* Remove old telemetry directory
* Update docker-sonic-mgmt-framework.mk
* Resolving merge conflict with Azure
* Reverting the wrong merge
* Use CVL_SCHEMA_PATH instead of changing directory for telemetry startup
* Add missing export
* Add python mmh3 to slave dockerfile
* Remove sonic-mgmt-framework build dep for telemetry, fix dialout startup issues
* Provided flag to disable compiling mgmt-framework
* Update sonic-utilites point latest commit id
* Point sonic-utilities to Azure accepted SHA
* Updating mgmt framework to right sha
* Add sonic-telemetry submodule
* Update the mgmt-framework commit id
Co-authored-by: jghalam <joe.ghalam@gmail.com>
Co-authored-by: Partha Dutta <51353699+dutta-partha@users.noreply.github.com>
Co-authored-by: srideepDell <srideep_devireddy@dell.com>
Co-authored-by: nirenjan <nirenjan@users.noreply.github.com>
Co-authored-by: Sachin Holla <51310506+sachinholla@users.noreply.github.com>
Co-authored-by: Eric Seifert <seiferteric@gmail.com>
Co-authored-by: Howard Persh <hpersh@yahoo.com>
Co-authored-by: Jeff Yin <29264773+jeff-yin@users.noreply.github.com>
Co-authored-by: Arunsundar Kannan <31632515+arunsundark@users.noreply.github.com>
Co-authored-by: rvasanthm <51932293+rvasanthm@users.noreply.github.com>
Co-authored-by: Ashok Daparthi-Dell <Ashok_Daparthi@Dell.com>
Co-authored-by: anand-kumar-subramanian <51383315+anand-kumar-subramanian@users.noreply.github.com>
Delay CPU intensive services at boot
- How I did it
Made snmp.timer work and add telemetry.timer.
But this is not enough because it breaks the existing snmp dependency on swss.
So, in this solution snmp timer is a wanted by swss service, but since OnBootSec timer expires only once it will not trigger snmp service, so I added line "OnUnitActiveSec=0 sec" which will start snmp service based on the last time it was active. On boot only OnBootSec will expire, on swss start/restarts only second timer will expire immediately and trigger snmp service.
However, snmp service will not stop after "systemctl stop snmp" because of the second timer which will always expire when snmp service because unavailable.
So there is a conflict which will be handled by systemd if we add "Conflicts=" line to both snmp.service and snmp.timer.
So during boot:
snmp does not start by default
swss starts and starts snmp timer
OnUnitActiveSec=0 does not expire since there is no snmp active
OnBootSec expires and starts snmp service and snmp timer gets stopped
During "systemctl restart swss"
snmp stops because of Requisite on swss
snmp unblocks snmp timer from running
swss starts and starts snmp timer
OnUnitActiveSec=0 expires imidiately and start snmp which stops snmp timer
During "systemctl stop snmp"
stop of snmp service unblocks snmp timer but no one starts the timer so it is not started by "OnUnitActiveSec=0"
* Corefile uploader service
1) A service is added to watch /var/core and upload to Azure storage
2) The service is disabled on boot. One may enable explicitly.
3) The .rc file to be updated with acct credentials and http proxy to use.
4) If service is enabled with no credentials, it would sleep, with periodic log messages
5) For any update in .rc, the service has to be restarted to take effect.
* Remove rw permission for .rc file for group & others.
* Changes per review comments.
Re-ordered .rc file per JSON.dump order.
Added a script to enable partial update of .rc, which HWProxy would use to add acct key.
* Azure storage upload requires python module futures, hence added it to install list.
* Removed trailing spaces.
* A mistake in name corrected.
Copy the .rc updater script to /usr/bin.
* ZTP infrastructure changes to support DHCP discovery provisioning data
- Dynamically generate DHCP client configuration based on current ZTP state
- Added support to request and process hostname when using DHCPv6
- Do not process graphservice url dhcp option if ZTP is enabled, ZTP service
will process it
- Generate /e/n/i file with all active interfaces seeking address assignment
via DHCP. Only interfaces that are created in Linux will be added to /e/n/i.
Also DHCP is started only on linked up in-band interfaces.
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
Put a flag for fast-reboot to the db using EXPIRE feature. Using this flag in other part of SONiC to start in Fast-reboot mode. If we reload a config, the state in the db will be removed.
* Create a SONiC configuration management service
* Perform config db migration after loading config_db.json to redis DB
* Migrate config-setup post migration hooks on image upgrade
config-setup post migration hooks help user to migrate configurations from
old image to new image. If the installed hooks are user defined they will not
be part of the newly installed image. So these hooks have to be migrated to
new image and only then they can be executing when the new image is booting.
The changes in this fix migrate config-setup post-migration hooks and ensure
that any hooks with the same filename in newly installed image are not
overwritten.
It is expected that users install new hooks as per their requirement and
not edit existing hooks. Any changes to existing hooks need to be done as
part of new image and not post bootup.
* Build sonic-ztp package
- Add changes in make rules to conditionally include sonic-ztp package
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
The sflow service should not start unless the swss service is started. However, if this service is not started, the sflow service should not attempt to start them, instead it should simply fail to start. Using Requisite=, we will achieve this behavior, whereas using Requires= will cause the required service to be started.
Add the same mechanism I developed for the SwSS service in #2845 to the syncd service. However, in order to cause the SwSS service to also exit and restart in this situation, I developed a docker-wait-any program which the SwSS service uses to wait for either the swss or syncd containers to exit.
* In the event of a kernel crash, we need to gather as much information
as possible to understand and identify the root cause of the crash.
Currently, the kernel does not provide much information, which make
kernel crash investigation difficult and time consuming.
Fortunately, there is a way in the kernel to provide more information
in the case of a kernel crash. kdump is a feature of the Linux kernel
that creates crash dumps in the event of a kernel crash. This PR
will add kermel kdump support.
An extension to the CLI utilities config and show is provided to
configure and manage kdump:
- enable / disable kdump functionality
- configure kdump (how many kernel crash logs can be saved, memory
allocated for capture kernel)
- view kernel crash logs
* Rename asn/deployment_id_asn_map.yaml to constants/constants.yaml
* Fix bgp templates
* Add community for loopback when bgpd is isolated
* Use correct community value
While doing CLI changes for SNMP configuration, few changes are made in backend to handle the modified CLI.
** Changes**
- "community" for "snmp trap" is also made as "configurable". snmpd_conf.j2 is modified to handle the same.
- Changed the snmp.yml file generation from postStartAction to preStartAction in docker_image_ctl.j2 specific to SNMP docker, to ensure that the snmp.yml is generated before sonic-cfggen generates the snmpd.conf.
- Changed to make the code common for management vrf and default vrf. Users can configure snmp trap and snmp listening IP for both management vrf and default vrf.
Issue Overview
shutdown flow
For any shutdown flow, which means all dockers are stopped in order, pmon docker stops after syncd docker has stopped, causing pmon docker fail to release sx_core resources and leaving sx_core in a bad state. The related logs are like the following:
INFO syncd.sh[23597]: modprobe: FATAL: Module sx_core is in use.
INFO syncd.sh[23597]: Unloading sx_core[FAILED]
INFO syncd.sh[23597]: rmmod: ERROR: Module sx_core is in use
config reload & service swss.restart
In the flows like "config reload" and "service swss restart", the failure cause further consequences:
sx_core initialization error with error message like "sx_core: create EMAD sdq 0 failed. err: -16"
syncd fails to execute the create switch api with error message "syncd_main: Runtime error: :- processEvent: failed to execute api: create, key: SAI_OBJECT_TYPE_SWITCH:oid:0x21000000000000, status: SAI_STATUS_FAILURE"
swss fails to call SAI API "SAI_SWITCH_ATTR_INIT_SWITCH", which causes orchagent to restart. This will introduce an extra 1 or 2 minutes for the system to be available, failing related test cases.
reboot, warm-reboot & fast-reboot
In the reboot flows including "reboot", "fast-reboot" and "warm-reboot" this failure doesn't have further negative effects since the system has already rebooted. In addition, "warm-reboot" requires the system to be shutdown as soon as possible to meet the GR time restriction of both BGP and LACP. "fast-reboot" also requires to meet the GR time restriction of BGP which is longer than LACP. In this sense, any unnecessary steps should be avoided. It's better to keep those flows untouched.
summary
To summarize, we have to come up with a way to ensure:
shutdown pmon docker ahead of syncd for "config reload" or "service swss restart" flow;
don't shutdown pmon docker ahead of syncd for "fast-reboot" or "warm-reboot" flow in order to save time.
for "reboot" flow, either order is acceptable.
Solution
To solve the issue, pmon shoud be stopped ahead of syncd stopped for all flows except for the warm-reboot.
- How I did it
To stop pmon ahead of syncd stopped. This is done in /usr/local/bin/syncd.sh::stop() and for all shutdown sequence.
Now pmon stops ahead of syncd so there must be a way in which pmon can start after syncd started. Another point that should be taken consideration is that pmon starting should be deferred so that services which have the logic of graceful restart in fast-reboot and warm-reboot have sufficient CPU cycles to meet their deadline.
This is done by add "syncd.service" as "After" to pmon.service and startin /usr/local/bin/syncd.sh::wait()
To start pmon automatically after syncd started.
slave.mk: add SONIC_PLATFORM_API_PY2 as dependency of host
sonic_debian_extension.j2: install sonic_daemon_base and Mellanox-specific sonic_platform on host
mlnx-platform-api.mk: export mlnx_platform_api_py2_wheel_path for sonic_debian_extension.j2
sonic-daemon-base.mk: export daemon_base_py2_wheel_path for sonic_debian_extension.j2
daemon_base.py: hind unnecessary dependency of swss_common on host
* [SNMP] management VRF SNMP support
This commit adds SNMP support for Management VRF using l3mdev.
The patch included provides VRF support, there is no single
"listendevice" configuration, rather multiple agentaddress
config options can each have their own "interface" to bind to
using "ip%interface". The snmpd.conf file is accordingly
generated using the snmp.yml file and redis database info.
Adding below the comments of SNMP patch 1376
--------------------------------------------
Since the Linux kernel added support for Virtual Routing
and Forwarding (VRF) in version 4.3
(Note: these won't compile on non-linux platforms)
https://www.kernel.org/doc/Documentation/networking/vrf.txt
Linux users could not use snmpd in its current form to
bind specific listening IP addresses to specific VRF
devices. A simplified description of a VRF inteface
is an interface that is a master (a container of sorts)
that collects a set of physicalinterfaces to form a
routing table.
This set of two patches (one for V5-7-patches and one
for V5-8-patches branches) is almost identical to patch
single "listendevice" configuration. Rather, multiple
agentAddress config options can each have their own
"interface" to bind to using the <ip>%<interface>
syntax.</interface></ip>
-------------------------------------------
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
Introduce a new "sflow" container (if ENABLE_SFLOW is set). The new docker will include:
hsflowd : host-sflow based daemon is the sFlow agent
psample : Built from libpsample repository. Useful in debugging sampled packets/groups.
sflowtool : Locally dump sflow samples (e.g. with a in-unit collector)
In case of SONiC-VS, enable psample & act_sample kernel modules.
VS' syncd needs iproute2=4.20.0-2~bpo9+1 & libcap2-bin=1:2.25-1 to support tc-sample
tc-syncd is provided as a convenience tool for debugging (e.g. tc-syncd filter show ...)
* Use dot1p to tc mapping for backend switches
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Do not write DSCP to TC mapping into CONFIG_DB or config_db.json for
storage switches
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Use dot1p to tc mapping for backend switches
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Do not write DSCP to TC mapping into CONFIG_DB or config_db.json for
storage switches
Signed-off-by: Wenda Ni <wenni@microsoft.com>
this is the first step to moving different databases tables into different database instances
in this PR, only handle multiple database instances creation based on user configuration at /etc/sonic/database_config.json
we keep current method to create single database instance if no extra/new DATABASE configuration exist in database_config.json file.
if user try to configure more db instances at database_config.json , we create those new db instances along with the original db instance existing today.
The configuration is as below, later we can add more db related information if needed:
{
...
"DATABASE": {
"redis-db-01" : {
"port" : "6380",
"database": ["APPL_DB", "STATE_DB"]
},
"redis-db-02" : {
"port" : "6381",
"database":["ASIC_DB"]
},
}
...
}
The detail description is at design doc at Azure/SONiC#271
The main idea is : when database.sh started, we check the configuration and generate corresponding scripts.
rc.local service handle old_config copy when loading new images, there is no dependency between rc.local and database service today, for safety and make sure the copy operation are done before database try to read it, we make database service run after rc.local
Then database docker started, we check the configuration and generate corresponding scripts/.conf in database docker as well.
based on those conf, we create databases instances as required.
at last, we ping_pong check database are up and continue
Signed-off-by: Dong Zhang d.zhang@alibaba-inc.com
radv should be left alone during warm restart of swss. Otherwise it will
announce departure and cause hosts to lose default gateway.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [service dependent] describe non-warm-reboot dependency outside systemctl
When dependency was described with systemctl, it will kick in all the time,
including under warm reboot/restart scenarios. This is not what we always
want. For components that are capable of warm reboot/start, they need to
describe dependency in service files.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [service] teamd service should not require swss service
Adding require swss will cause teamd to be killed by systemctl when swss
stops. This is not what we want in warm reboot.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* refactoring code
* rename functions to match other functions in the file
- What I did
Move the enabling of Systemd services from sonic_debian_extension to a new systemd generator
- How I did it
Create a new systemd generator to manually create symlinks to enable systemd services
Add rules/Makefile to build generator
Add services to be enabled to /etc/sonic/generated_services.conf to be read by the generator at boot time
Signed-off-by: Lawrence Lee <t-lale@microsoft.com>
ARM Architecture support in SONIC
make configure platform=[ASIC_VENDOR_ARCH] PLATFORM_ARCH=[ARM_ARCH]
SONIC_ARCH: default amd64
armhf - arm32bit
arm64 - arm64bit
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* Upgrade ifupdown2 to version 1.2.8
Required by ZTP to support ZTP over IPv6 transport
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
- Make sure that migrated DB contents persisted for next boot
- Make sure that db saved after warm reboot.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* Added debug symbols to many debug dockers.
* For debug images *only*:
1) Archive source files into debug image
2) Archived source is copied into /src
3) Created an empty dir /debug
4) Mount both /src as ro & /debug as rw into every docker
5) Login banner will give some details on /src & /debug
6) Devs can copy core file into /debug and view it from inside a container.
7) Dev may create all gdb logs and other data directly into /debug.
* Dropped redundant REDIS_TOOLS per review comments.
* Added debug symbols to frr package and hence FRR based BGP docker.
* 1) Moved dbg_files.sh to scripts/
2) Src directories to archive are now collected from individual Makefiles.
3) Added few more debug symbols
4) Added few more debug dockers.
Here after no more changes except per review comments.
To debug:
Install required version of debug image in Switch or VM.
Copy core file into /debug of host
Get into Docker
gdb /usr/bin/<daemon> -c /debug/<your core file>
set directory /src/... <-- inside gdb to get the source
For non-in-depth debugging:
Download corresponding debug Docker image (docker-...-dbg.gz) to your VM
Load the image
Run image with entrypoint as 'bash' with dir containing core mapped in.
Run gdb on the core.
* fix fast reboot compatibility
We should handle both cases for backward-compatible with 201803:
- fast-reboot
- SONIC_BOOT_TYPE=fast-reboot
* handle review comments
* add a comment that getBootType code snippet is shared between two files
* [submodule] update sonic-linux-kernel
* update linux kernel version
* Fix many version strings
* update mellanox components (built with new kernel)
* [mlnx] add make files for SDK WJH libs
* Update arista driver submodule (#8)
Make the debian packaging point to a newer kernel version.
* Updated Makefile infrastructure to build debug images.
As a sample, platform/broadcom/docker-orchagent-brcm.mk is updated to add a docker-orchagent-brcm-dbg.gz target.
Now "BLDENV=stretch make target/docker-orchagent-brcm-dbg.gz" will build the debug image.
NOTE: If you don't specify NOSTRETcH=1, it implicitly calls "make stretch", which builds all stretch targets and that would include debug dockers too.
This debug image can be used in any linux box to inspect core file. If your module's external dependency can be suitably mocked, you my even manually run it inside.
"docker run -it --entrypoint=/bin/bash e47a8fb8ed38"
You may map the core file path to this docker run.
* Dropped the regular binary using DBG_PACKAGES and a small name change to help readability.
* Tweaked the changes to retain the existing behavior w.r.t INSTALL_DEBUG_TOOLS=y.
When this change ('building debug docker image transparently') is extended to all dockers, this flag would become redundant. Yet, there can be some test based use cases that rely on this flag.
Until after all the dockers gets their debug images by default and we switch all use cases of this flag to use the newly built debug images, we need to maintain the existing behavior.
* 1) slave.mk - Dropped unused Docker build args
2) Debug template builder: renamed build_dbg_j2.sh to build_debug_docker_j2.sh
3) Dropped insignifcant statement CMD from debug Docker file, as base docker has Entrypoint.
* Reverted some changes, per review comments.
"User, uid, guid, frr-uid & frr-guid" are required for all docker images, with exception of debug images.
* Get in sync with the new update that filters out dockers to be built (SONIC_STRETCH_DOCKERS_FOR_INSTALLERS) and build debug-dockers only for those to be built and debug target is available.
* Mkae a template for each target that can be shared by all platforms.
Where needed a platform entry can override the template.
This avoids duplication, hence easier to maintain.
* A small change, that can fit better with other targets too.
Just take the platform code and do the rest in template.
* Extended debug to all stretch based docker images
* 1) Combined all orchagent makefiles into one platform independent make under rules/docker-orchagent.mk
2) Extened debug image to all stretch dockers
* Changes per review comments:
1) Dropped LIBSAIREDIS_DBG from database, teamd, router-advertiser, telemetry, and platform-monitor docker*.mk files from _DBG_DEPENDS list
2) W.r.t docker make for syncd, moved DEPENDS from template to specific makefile and let the template has stuff that is applicable to all.
* 1) Corrected a copy/paste mistake
* Fixed a copy/paste bug
* The base syncd dockers follow a template, which defines the base docker as DOCKER_SYNCD_BASE instead of DOCKER_SYNCD_<platform code>. Fix the docker-syncd-<mlnx, bfn>.mk to use the new one.
[Yet to be tested locally]
* Fixed spelling mistake
* Enable build of dbg-sonic-broadcom.bin, which uses dbg-dockers in place of regular dockers, for dockers that build debug version. For dockers that do not build debug version, it uses the regular docker.
This debug bin is installable and usable in a DUT, just like a regular bin.
* Per review comments:
1) Share a single rule for final image for normal & debug flavors (e.g. sonic-broadcom.bin & sonic-broadcom-dbg.bin)
2) Put dbg as suffix in final image name.
3) Compared target/sonic-broadcom.bin.logs with & w/o fix to verify integrity of sonic-broadcom.bin
4) Compared target/sonic-broadcom.bin.logs with sonic-broadcom-dbg.bin.log for verification
This fix takes care of ONIE image only. The next PR will cover the rest.
The next PR, will also make debug image conditional with flag.
* Updated per comments.
Now that debug dockers are available, do not need a way to install debug symbols in regular dockers.
With this commit, when INSTALL_DEBUG_TOOLS=y is set, it builds debug dockers (for dockers that enable debug build) and the final image uses debug dockers. For dockers that do not enable debug build, regular dockers get used in the final image.
Note:
The debug dockers are explicitly named as <docker name>-dbg.gz. But there is no "-dbg" suffix for image.
Hence if you make two runs with and w/o INSTALL_DEBUG_TOOLS=y, you have complete set of regular dockers + debug dockers. But the image gets overwritten.
Hence if both regular & debug images are needed, make two runs, as one with INSTALL_DEBUG_TOOLS=y and one w/o. Make sure to copy/rename the final image, before making the second run.
- use superviord to manage process in frr docker
- intro separated configuration mode for frr
- bring quagga configuration template to frr.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [service] Restart SwSS Docker container if orchagent exits unexpectedly
* Configure systemd to stop restarting swss if it attempts to restart more than 3 times in 20 minutes
* Move supervisor-proc-exit-listener script
* [docker-dhcp-relay] Enhance wait_for_intf.sh.j2 to utilize STATEDB
* Ensure dependent services stop/start/restart with SwSS
* Change 'StartLimitInterval' to 'StartLimitIntervalSec', as Stretch installs systemd 232 (>= v230)
* Also update journald.conf options
* Remove 'PartOf' option from unit files
* Add '$(SUPERVISOR_PROC_EXIT_LISTENER_SCRIPT)' to new shared docker-orchagent makefile
* Make supervisor-proc-exit-listener script read from 'critical_processes' file inside container
* Update critical_processes file for swss container
SWSS clears DB tables, if teamd is not started after swss, there is a
race condition that swss might clear vital teamd information.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
This service (weekly) will let SSD firmware to do the garbage collection
after file-system deleted files. It could avoid slowness or
even READ-ONLY error due to SSD not being able to free the pages
even though the file system thinks there was a lot of space left.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
After warm reboot is done, we need to disable warm reboot flag and
tear down anything setup for warm reboot and persisted across.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* Install ipaddress python package that has deprecated current ipaddr. ipaddress has backport to python2.7
* Install python ipaddress module as required by route_check.py sonic utility. BTW, ipaddress deprecates ipaddr and ipaddress has python2 backport
* Revert the old chaneg per review comments.
Signed-off-by: Renuka Manavalan <remanava@microsoft.com>
- Why it is required
since SONiC master switches ifupdown package to the new implementation (ifupdown2), it is required to change the configuration of a platform-specific interface for wedge100bf_32x and wedge100bf_65x platforms (bc of ifupdown2 doesn't support auto mode for inet6 protocol).
Also, need to make some refactoring and remove if platform == smth then.. from the system level scripts.
- What I did
removed customization of /usr/bin/interfaces-config.sh
explicitly created directory /etc/network/interfaces.d
added "source" to the /etc/network/interfaces generation template (to include platform-specific interfaces processing)
added platform-specific interfaces config itself (for wedge100bf_32x and wedge100bf_65x)
fixed testcase in sonic-config-engine
- How to verify it
build image for wedge100bf_32x
perform sudo config reload -y on new installation
check the correct configuration of usb0 interface
- Description for the changelog
Allow configuration of platform-specific interfaces
Lossy traffic does not need to be mapped to different ingress PGs. They can all share the same ingress PG.
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* [services] Ensure swss and syncd services start before dependent services
* Add 'attach' functions to scripts which get installed to /usr/local/bin so that services only reference the one script each
* Add 'After=swss.service' to syncd.service
* [build]: put stretch debian packages under target/debs/stretch/
* in stretch build phase, all debian packages built in that stage are placed under target/debs/stretch directory.
* for python-based debian packages, since they are really the same for jessie and stretch, they are placed under target/python-debs directory.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* QoS config change: 1) DSCP mapping; 2) link pg/queue 6 to lossy buffer;
3) redistribute scheduler
Signed-off-by: Wenda <wenni@microsoft.com>
* Add scheduling weight to queue 2
Signed-off-by: Wenda <wenni@microsoft.com>
* Link pg/queue 2 to lossy buffer
Signed-off-by: Wenda <wenni@microsoft.com>
* Update the pg headroom for a7060-D48C8 50G
Signed-off-by: Wenda <wenni@microsoft.com>
* Update config gen test for qos
Signed-off-by: Wenda <wenni@microsoft.com>
* Update pg headroom size, and update egress lossy pool size accordingly
Signed-off-by: Wenda <wenni@microsoft.com>
* Update headroom pool size; Update ingress service pool and egress lossy
pool sizes accordingly;
Signed-off-by: Wenda <wenni@microsoft.com>
* a7260: update headroom pool size; Update ingress service pool and egress lossy pool sizes accordingly;
Signed-off-by: Wenda <wenni@microsoft.com>
* Update config gen test for buffer
Signed-off-by: Wenda <wenni@microsoft.com>
* [security kernel] Upgrade kernel from 4.9.110-3+deb9u2 to 4.9.110-3+deb9u6
short version: 4.9.0-7 to 4.9.0-8
See changelogs for security fixes:
https://tracker.debian.org/media/packages/l/linux/changelog-4.9.110-3deb9u6
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update sonic-linux-kernel submodule after it was merged
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* 1) DSCP 46 to 5; 2) ecn config for lossless traffic; 3) ecn on by default; 4) DWRR equal weight;
Signed-off-by: Wenda <wenni@microsoft.com>
* 1) link pg & queue 5 to lossy buffer profile; 2) ingress lossless alpha 1/8
Signed-off-by: Wenda <wenni@microsoft.com>
* Update the test case for qos & buffer json template
Signed-off-by: Wenda <wenni@microsoft.com>
* Migrate a7050-qx32 and s6000 to use pg_profile lookup architecture
Signed-off-by: Wenda <wenni@microsoft.com>
* Update pg headroom egress service pool for a7050-qx-32s, a7050-qx32, and s6000
Signed-off-by: Wenda <wenni@microsoft.com>
* Link queue 5 to lossy profile
Signed-off-by: Wenda <wenni@microsoft.com>
init_interfaces meant to be sonic init interfaces configuration file.
However, it needs to be copied to the right file name to take effect.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
There was a fix to speed up initialization when networking used init.d
but it did not carry over to systemd networking.service. This fix will
apply the same change on the systemd service.
The result is much less time spent being blocked in networking.service.
* [warmboot] Load database from `redis-cli save`
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Add trivial statement to make bash function valid
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Update submodule sonic-utilities: Use 'redis-cli save' to dump database to file
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Move configdb-load.sh outside docker, and only run in cold
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Fix for more strict warm check
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
This driver should be loaded by sonic service. If kernel tries to load
it, the driver would be loaded with default parameters, which is not
right for sonic.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* Fix redis-py version
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Update submodule sonic-py-swsssdk: Fix redis-py version to 2.10.6
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Unify qos config with qos_config.j2 template
Signed-off-by: Wenda <wenni@microsoft.com>
* Change 7050 to use qos config template
Signed-off-by: Wenda <wenni@microsoft.com>
modified: device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/qos.json.j2
modified: device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/qos.json.j2
* Change a7060, a7260, s6000, s6100, z9100 to use qos config template
Signed-off-by: Wenda <wenni@microsoft.com>
* Change mlnx devices to use qos config template
Signed-off-by: Wenda <wenni@microsoft.com>
modified: ../../../mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2
modified: ../../../mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2
modified: ../../../mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2
modified: ../../../mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2
* Change barefoot devices to use qos config template
Signed-off-by: Wenda <wenni@microsoft.com>
modified: barefoot/x86_64-accton_wedge100bf_32x-r0/montara/qos.json.j2
modified: barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/qos.json.j2
* Change accton as7212 to use qos config template
Signed-off-by: Wenda <wenni@microsoft.com>
modified: accton/x86_64-accton_as7212_54x-r0/AS7212-54x/qos.json.j2
* Apply PORT_QOS_MAP to active ports only
Signed-off-by: Wenda <wenni@microsoft.com>
* Update qos config test with qos_config.j2 template
Signed-off-by: Wenda <wenni@microsoft.com>
* Update sample output of qos-dell6100.json
Signed-off-by: Wenda <wenni@microsoft.com>
* Remove generating the default port name and index list, i.e., remove the generate_port_lists macro, because PORT is always defined
Signed-off-by: Wenda <wenni@microsoft.com>
* Include pfc_to_pg_map according to platform asic type obtained from
/etc/sonic/sonic_version.yml rather than specifying per hwsku
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Customize TC_TO_PRIORITY_GROUP_MAP and
PFC_PRIORITY_TO_PRIORITY_GROUP_MAP for barefoot
Signed-off-by: Wenda <wenni@microsoft.com>
* Unify PFC_PRIORITY_TO_PRIORITY_GROUP_MAP: remove "0":"0", "1":"1" as
these two pgs do not generate PFC frames.
Signed-off-by: Wenda <wenni@microsoft.com>
Update the hw-mgmt to latest release V.2.0.0060.
Update the related files according to the latest hw-mgmt.
Signed-off-by: Kevin Wang <kevinw@mellanox.com>
* [swss.sh] refactor ssh service script code
- Move checks and waits to helper functions.
- Remove early returns from code stream
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [swss.sh] Add debug log for service state changes
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [syncd] Separate out syncd service from swss service
Still make them start/stop/restart synchronously so existing scripts
continue working.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* Remove extra 'After' in swss service and remove syncd docker warm boot code
Syncd warm boot needs more thinking, we can put it back once the work
flow has been defined and ready for coding/testing.
* [syncd] syncd start/stop/restart shouldn't affect swss state
Semi-detach syncd service state change from swss:
- swss state change still chase syncd service to follow except warm boot
- syncd state change will only affect itself.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* add missing '{'
* Added new platform support DellEMC - Z92264f - 64x100
* Includes changes with Makefiles, sfputil, eeprom and default minigraph
* Led support for Z9264f platform
* Includes changes on default minigraph
* ipmitool implementation in pmon docker. platform_sensors script is inclued in pmon startup
* Fix for bash's memory-leak
Memory leak is observed during the execution of scripts that make use of bash-arrays. In scenarios where the offending script is executed on a regular basis (e.g. fancontrol), the leaking process may end up consuming most of the system resources.
In this PR i'm replacing bash in all the contexts where it executes (both host and dockers). The official patch for this issue is here: https://ftp.gnu.org/gnu/bash/bash-4.3-patches/bash43-040
* Fixing minor issue during code-merge
Signed-off-by: Rodny Molina <rmolina@linkedin.com>
* Initial commit
* Add Ingrasys S9180-32X platform dirver.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn.service for init barefoot.
Signed-off-by: Wade He <chihen.he@gmail.com>
* [Barefoot Beta] Add some functions and fixed some bugs.
1. Update sensors.conf.
2. Fixed IO expander init.
3. Fixed PSU EEPROM.
4. Fixed MB EEPROM.
5. Add fancontrol and fan init.
6. Add SYS LED control (sys, fan, fan tray).
7. 2.5V compute and setup max and min.
8. Fixed typo MB eeprom delete address.
9. Remove coretemp to BMC.
10. Add active CPLD.
11. Modify SFP+ GPIO slave address.
12. Modify tmp75 Near Port 32 slave address.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn script in /etc/init.d/
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn service in debian
Signed-off-by: Wade He <chihen.he@gmail.com>
* Fixed CPLD switch LED behavior.
Signed-off-by: Wade He <chihen.he@gmail.com>
* [Barefoot Beta] Fixed sensors and hwmon order.
1. Fixed ignore sensors Vbat.
2. Reorg hwmon order.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Fixed PSU1 and PSU2 EEPROM order.
Signed-off-by: Wade He <chihen.he@gmail.com>
* initial barefoot checkin october 2017
* update refpoint
* update refpoints
* update refpoints to bf-master
* update refpoint
* update refpoint to tested version
* change to platform from asic
* update refpoint for swss
* revert core creation setting
* update refpoints
* add telnet for debug shell
* update refpoints 11/17/17
* missed change in file on previous merge
* [CPLD] Fixed blink LED issue.
* Fixed blink LED mask set error.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Update bf_kdrv.c for 6.0.2.39
* Update bf kernel driver
* Add bf_fun kernel module.
* Update bf_tun for fixed build error
* merge with Azure master (12/12/17)
* update swss refpoint
* update refpoint of swss
* library dependency for stack unroll
* update refpoint to bf-master
* [DHCP relay]: Fix circuit ID and remote ID bugs (#1248)
* [DHCP relay]: Fix circuit ID and remote ID bugs
* Set circuit_id_len after setting circuit_id_len to ip->name
* [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272)
* Add I2C CPLD kernel module for psuutil.
* Support psuutil script.
* Add voltage min and max threshold.
* Update sensors.conf for tmp75.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Allow multi platform support - infra (more changes to follow)
* update relative path to include platform for clarity
* [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274)
- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X
- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
Update Head of submodule src/sonic-sairedis to "3b817bb"
- How to verify it
To build SONiC installer image and docker images, run the following commands:
make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well
- Description for the changelog
Add switch ASIC vendor and platforms for Nephos
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>
* change source of files to github (from dropbox), update sairedis refpoint
* update refpoint of sairedis
* [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269)
* [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287)
* update sairedis (fast-boot refpoint)
* fix syncd rpc make files
* update refpoint to handle Makefile change (no functional change)
* [Marvell]: Add support for SLM5401-54x device (#1307)
* Marvell's updates for SONiC.201712 & SAI v1.0
* [Platform] Add Marvell's SLM5401-54x for branch 201712
* [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321)
- update Arista 7050-QX32S config.bcm file
- update Accton th-as771*-32x100G.config.bcm files
* update refpoint for Makefile chnage in sairedis
* update refpoint - sairedis
* update sairedis to older refpoint till we debug clean build
* export asic platform for build
* update refpoint for makefiles
* [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332)
* Upload wnc-osw1800
* Modify for Barefoot suggest
* Revert bfn-platform.mk
* Update bfn-platform-wnc.mk
Update parameter name
* Update parameter name
* initial support for WNC platform
* change switch name to "switch"
* Delete bf modules for rel_7_0
* Add Ingrasys S9180 platform
Signed-off-by: Wade He <chihen.he@gmail.com>
* Modify bfnsdk for Ingrasys S9180 platform
Signed-off-by: Wade He <chihen.he@gmail.com>
* Resolved the conflict.
* Resolved the conflict.
* Update submodule path and url.
* Delete unused file.
* Update PSU GPIO and EEPROM for psuutil.
* Add psuutil in S9180-32X
Signed-off-by: Wade He <chihen.he@gmail.com>
* update refpoint
* update refpoint
* change contact email, update refpoint
* cleanup and update kernel modules
* updates based on review
* update refpoint
* update refpoint
* fix typo in config script to check for platforms
* remove stale file
* resolve conflicts
* cleanup diffs with Azure repo and update SDK debs
* update refpoints to Azure
* address review comments
* revert refpoint of swss-common
* porting the build fix from master
* porting build fix from master
* Minor Fix
* Minor fix
* Temp to sde deb packages url
* Update sonic - sairedis,swss & swss-common refpoints
* Update git modules url path to bfn repo
* updated paths for swss, swss-common & sairedis
* Update refpoint for sonic-swss to local bfn repo
* Update URL for downloading sde debian packages
* porting fix links of debian git server from master
* porting fix links of debian git server from master
* [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC
* Update ref points for swss, swss-common and sairedis repos
* Add sonic platform scripts for bfn montara/maverick
* Call sh scripts instead of calling py scripts
* Address upstream PR Comments (#10)
* Update bf-master with azure/master
* Undo changes to some files
* Revert "Address upstream PR Comments (#10)"
This reverts commit a7fddb83ca.
* Address upstream comments (#11)
* Remove all non bfn specific changes from upstream PR
* Revert "Address upstream comments (#11)"
This reverts commit 559132103e.
* Undo non bfn changes
* Little more cleanup
* Add back code removed in merge
* export CONFIGURED_PLATFORM
* Update sairedis and swss refpoints
* Address Upstream PR comment
* change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64
* Set default tx queue len for usb0 interface to 64
* Update sairedis refpoint
* Update swss ref point
* Add bfn buffer cfg files for montara/maverick as per new design
* Update buffer cfg templates for bfn montara
* add non zero size to buffer profile
* add macro to generate port lists
* Update buffer cfg templates for bfn mavericks
* add non zero size for buffer profiles
* add port generation macro
* Add missing psmisc package
* BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions.
Adding psmisc to resolve this issue.
* Update swss ref point
* Update swss ref point
* Update sairedis refpoint
* Update sairedis refpoint
* Update sairedis refpoint
* Update sairedis refpoint
* Update refpoint for sairedis and swss
* sairedis to azure master
* swss to latest bfn bf-master
* Update gitmodules
Update url for sairedis to azure master
* Correct typo in bfn platform script
* Update swss and sairedis ref points
* Update swss ref point
* Address Review comments
* Update swws path in gitmodules to azure master
* update swss refpoint
* update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR)
* Fix sairedis refpoint broken in by previous merge
* Remove psmisc from docker base image
* This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session.
Will fix this in a seperate PR. Need this for SONIC upstreaming
* Address upstream comments
* Remove bmc interface from interface jinja template and sample output interfaces file
* Add bmc interface at boot time to network interfaces for bfn bmc based platforms
* Remove autogen ingrasys debian files
* Revert "Remove autogen ingrasys debian files"
* Buffer and qos config template fix for bfn platforms (#21)
SWI-1509 Buffer and qos config template fix for bfn platforms
* Fix qos config files for montara & mavericks (#22)
* Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs
* Fix vs test (#23)
* Use MAC from EEPROM for PortChannels
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* Use MAC from EEPROM in DEVICE_METADATA
Will affect MAC for VLAN interfaces
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* Get MAC via decode-syseeprom
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* hw-management is now a service
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* Add error handling for MAC fetch process
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* First part of skipping not used port for qos configuration
* Use active ports only to set QoS parameters for 6100
* Add a test for qos.json.j2
* Add a test for Dell S6100 buffers.json template
* Update submodulre
* Revert "[serial watchdog] remove serial watchdog service dependency to rc.local (#1752)"
* Revert "[service] introducing serial port watchdog service (#1743)"
* [rc.local] refactor platform identification code to separate function
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [rc.local] infrastructure to take action according to installer.conf
* [serial port watchdog] add service to watch serial port processes
Monitor serial port processes. Kill ones stuck for too long.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [rc.local] start watchdog on serial port specified by installer.conf
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* Fix tcpdmatch dependency
Issue: sonic_debian_extension.j2 uses tcpdmatch from src folder
which is result of libwrap build
Fix: added tcpd.deb to build results and extract required files
from build results
* Install libwrap0 and tcpd deb packages
* SONiC system telemetry Support
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Update package name from telemetry to sonic-telemetry
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
- Service unit file not getting generated because I changed the docker
container name from 'router_advertiser' to 'radv', however I didn't
rename the service unit file template name to match. However,
slave.mk generates a service file for every docker based on its
container name, and since there was no matching 'radv.service.j2'
template file, this file stopped getting generated and therefore
the docker container was never getting started.
- Also add swss.service to 'Requires'
- Move all minigraph-related action from rc.local to updategraph
- updategraph service is now after database. All feature services are now after and depending on updategraph
* [sonic build] Define folder macro for target folder /usr/sonic/share/templates
* [sonic-cfggen] allow templates to include from common folders
- Allow templates to include files under /usr/share/sonic/templates
- Allow templates to include files in the same folder as the root template
* [Buffer config] install the buffer configuration template
* [Arista7260cx3] Add buffer configuration for Arista7260CX3 T0 topology
- pg profile look up table is incomplete. Currently contains T0 default
values.
* [Arista7260cx3] Adding QoS configuration
* Address review comments
1. Stop generating ingress pg configuration for lossless pgs.
2. Stop putting ports into speed sets, put all ports in one set.
3. Remove ingress lossless profiles.
4. Added some tailing '-' back to remove leading spaces.
- What I did
Updating SDK version from 3.16.0-4 to 3.16.0-5
- How I did it
Updating SDK version in files/build_templates/swss.service.j2
- How to verify it
Checking command "config load_minigraph" without errors
- Description for the changelog
Updating SDK version from 3.16.0-4 to 3.16.0-5 in swss.service.j2
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>
* Upgrade linux-image version
* Add missing dependency of igb
* Fix mft build rule
* Add missing dependency of ixgbe
* [Broadcom]: Update OpenNSL modules to be compatible with kernel 3.16.0-5 (#3)
* [Nephos] Update SDK version to support new kernel module 3.16.0-5 (#4)
* [mellanox]: Update URL for SDK (#5)
When teamd service restarted, the port channels will be recreated.
Dhcp relay service needs to be restarted after that to listen on the
right port channels.
* Add switch ASIC vendor and platforms for Nephos
- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X
- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
- How to verify it
To build SONiC installer image and docker images, run the following commands:
make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well
- Description for the changelog
Add switch ASIC vendor and platforms for Nephos
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>
* Advance sonic-sairedis submodule to include #271 (Add Nephos ASIC)
snmp.service needs to read chassis serial number for one of its mibs.
We save this value in state DB so that it is accessible from container.
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* [TACACS+]: Add configDB enforcer for TACACS+
* hostcfgd - configDB enforcer for TACACS+, listen configDB to
modify the pam configuration for Authentication in host
* Add a service script for hostcfgd
Signed-off-by: Chenchen Qi <chenchen.qcc@alibaba-inc.com>
* [TACACS+]: Generate conf file by template file
* Generate common-auth-sonic and tacplus_nss.conf by jinja2 template
Signed-off-by: Chenchen Qi <chenchen.qcc@alibaba-inc.com>
* [TACACS+]: Add support for TACACS+ Authentication
* pam_tacplus - A TACACS+ protocol client library and PAM module to
supports core TACACS+ functions for AAA.
* nss_tacplus - A NSS plugin for TACACS+ to extend function getpwnam,
make the TACACS+ authenticated user which is not found in local
could login successfully.
* Add make rules for pam_tacplus and install script
* Add a patch for pam_tacplus to disable pam-auth-update pam-tacplus
by default
* Add a patch for pam_tacplus to inlucde and build nss_tacplus
Signed-off-by: chenchen.qcc@alibaba-inc.com
* [TACACS+]: Add nss-tacplus as a separate src repo
* Separate nss-tacplus from pam-tacplus, modify tacacs.mk and
makefile, add a patch to adapt to the new user map profile.
* Use the lastest stable version for pam-tacplus, add a dependent
package in sonic-salve, add two patches to fix build error.
* Add scripts to disable tacplus by default.
* Remove hostcfgd service file
Signed-off-by: Chenchen Qi <chenchen.qcc@alibaba-inc.com>
* [TACACS+]: Fix nss-tacplus filter some valid TACACS+ username
* The NAME_REGEX for username check in plugin nss-tacplus is
the ANSI version "^[0-9a-zA-Z_-\ ]*$", but the regular expression
in /etc/adduser.conf is not defined as ANSI version. To avoid
nss-tacplus filter some valid TACACS+ username, remove username
check.
Signed-off-by: Chenchen Qi <chenchen.qcc@alibaba-inc.com>
* [init]: save the initial switch mac to config db
Save the initial switch mac to config db DEVICE_METADATA|localhost entry.
* update sonic-swss submodule
* [Arista]: Fix the udev waiting in networking start
This change is to fix the issue in https://github.com/aristanetworks/sonic/issues/16
For the checking condition used, it is only applied to Arista switches
Signed-off-by: Boyang Yu <byu@arista.com>
* [Arista]: Correct for PR comments
Signed-off-by: Boyang Yu <byu@arista.com>
* [build]: sonic-utilities package now depends on swsssdk; add build dependency
* Now building sonic-utilities Python package in wheel format
* Update sonic-utilities submodule
* Change output wheel name to match proper format
* Framework to plugin Organization specific scripts
* Framework to plugin Organization specific scripts
* Framework to plugin Organization specific scripts
* add getopt option to organization script
Existing dockers has paths mounted according to the HWSKU. When HWSKU
changes, these dockers need to be destroyed and recreated with the
correct paths mounted.
Modify minigraph parser output format so it fit DB schema
Modify configuration templates to fit new schema
Systemd services dependencies are modified so database starts before any configuration consumer
- Force log rotation at size thresholds only (no longer also rotating logs daily), allowing for more consistent archived log size
- Eliminate remaining duplicate log messages
- Cron facility now only logs to cron.log (was also logging to syslog)
- Debug, mail, news and user log facilities only log to syslog; no longer creating separate log files for these facilities
- Cron job that calls logrotate every minute now uses the main /etc/logrotate.conf file so as to check/rotate all logs every minute, not just the logs specified in the rsyslog file. Also redirecting output of this command to /dev/null to prevent "(CRON) info (No MTA installed, discarding output)" messages in cron.log due to lack of a mail service
- Delete archive files based on remaining /var/log partition space. Note that this solution currently requires a minimum /var/log partition size of 32MB to function correctly
- Update sonic-sairedis and sonic-swss submodules to incorporate recording file name changes
- Add .screen file to .gitignore (unrelated)
* [cfggen] Support reading from and writing to configdb
* [bgp] Move bgp_admin_state to configdb, support dynamic admin state change
* [sonic-utilities] Adapt configDB for admin status, support config save and config load
* [bgp] Save admin state and set default state to shutdown
* Set default behavior to no shutdown
* Add build option SHUTDOWN_BGP_ON_START
* Script change for default admin state to be on
* Address CR comments to bgp_neighbor script
* Fix script bug
* Rename 'ACSFileFormat' -> 'SONiCFileFormat'
* Rename '00-acs.conf' -> '00-sonic.conf'
* Add logrotate.d and systemd-journald config files to image
* Log all SONiC process messages to /var/log/syslog; prevent duplicate logging to /var/log/messages
* Do not redirect cron and daemon logs to their own files, let them log to /var/log/syslog
* Log all teamd messages to /var/log/teamd.log; Add more SONiC program names to SONiC rules clause
* Remove duplicate code by condensing quagga programs into a list; Fix teamd log rule
* Kernel and LPR messages no longer getting duplicated to their own log files
* Now calling logrotate every minute via cron job
* Need full path to logrotate in cron job
* Add '.log' suffix to wildcards, otherwise logrotate will rotate already-rotated logs (e.g., bgpd.log.1.1.1.1.1...)
* Add microsecond granularity to syslog messages
* Don't overwrite system crontab, instead, install additional logrotate crontab file into /etc/cron.d
* Removed incomplete concept of per-process SONiC logs. We can revisit again later
* [device]: Add support for Mellanox MSN2410
MSN2410 runs on Spectrum silicon and has 56 ports:
48 25GbE and 8 100GbE
* Avoid full path within bash -c
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* [build]: Include SONiC version into installer.
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Append dirty if contains local changes
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Update config
* Use correct name for kernel version field
* Update sysDescription.j2
* [base image]: Install SwSS SDK Python packages (Python 2 & 3) into base image
* Fix typo in existing variable name
* Only install Python 2 version, as Python 3 is not installed in base image
- This change ensures that when shuting down, opennsl-modules will
not stop until swss stops. Otherwise it will cause kernel stack
trace.
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
- Create /var/run/redis/ folder on the host
- Install Python client for Redis on the host
- Mount /var/run/redis/ as read/write from host for all dockers
- Enable accessing the database everywhere including on the host and from remote
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
When Type=simple, systemd will consider the service activated immediately
after specified in ExecStart process is started. If there is downstream
service depending on the state prepared in ExecStart, there will be race condition.
For example, issue #390. In this case, database.service calls database.sh, which
calls docker run or docker start -a to start database container. However, systemd
considers database.service successfully started at the time database.sh begins,
not after docker run finishes. As database.service is consider started, bgp.service
can be started. The redis database, which bgp service depends on, might or might not
have been started at this time point.
To fix this issue (and still keeping the functionality to monitor docker status with
systemd), we split the ExecStart process into an ExecStartPre part and an ExecStart
part. docker run is splitted into docker run -d then docker attach , while docker start
-a is splitted into docker start and then docker attach. In this way, we make sure
the downstream services are blocked until container is successfully started.
