* Fix debug package variables for syncd
PR #16072 renamed the debug package variables from `*_DBG` to
`*_DBGSYM`, since the package names had changed. However, the references
weren't updated. Since all the other debug packages (including ones that
are named `*-dbgsym`) use `*_DBG`, just use that here as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Update sairedis.mk as well
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Update sairedis submodule
This submodule update needs to be manually done due to build changes
done in the sairedis submodule. Specifically, Debian build profiles are
now being used instead of dpkg build targets, and dbgsym packages are
being used instead of dbg packages. Because of this, there needs to be
changes on the sonic-buildimage side for this.
This is a reland of #15720, which was reverted in #15995 due to the RPC
package build failing. That failure has since been fixed, and the
PR pipeline has been updated to build the RPC package so that this is
checked at the PR stage.
This submodule update brings in the following changes:
```
4dbdb21 Fix RPC package build failure due to shell syntax issue (#1268)
588d596 Make sure new binaries replace existing binaries in docker-sonic-vs (#1269)
ce8f642 [vs] Use boost join to concatenate switch types in config (#1266)
d6055a2 [vslib]: Temporaily map DPU switch type to NVDA_MBF2H536C (#1259)
e1cdb4d [CodeQL]: Use dependencies with relevant versions in azp template. (#1262)
c08f9a2 [CI]: Fix collect log error in azp template. (#1260)
eed856c [CodeQL]: Fix syncd compilation in azp template. (#1261)
a3f1f1a Reland 'Make changes to building and packaging sairedis (#1116)' (#1194)
```
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Update sairedis submodule with the fix for the RPC package build
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This reverts commit e0927e28af.
Why I did it
Reverts #15720
It breaks build for target/debs/bullseye/syncd_1.0.0_amd64.deb
make[2]: Entering directory '/sonic/src/sonic-sairedis'
dh_install
# Note: escape with an extra symbol
if [ -f debian/syncd-rpc/usr/bin/syncd_init_common.sh ] ; then
/bin/sh: 1: Syntax error: end of file unexpected (expecting "fi")
make[2]: *** [debian/rules:65: override_dh_install] Error 2
make[2]: Leaving directory '/sonic/src/sonic-sairedis'
make[1]: *** [debian/rules:51: binary] Error 2
make[1]: Leaving directory '/sonic/src/sonic-sairedis'
dpkg-buildpackage: error: fakeroot debian/rules binary subprocess returned exit status 2
Work item tracking
Microsoft ADO (number only): 24691535
How I did it
How to verify it
This submodule update needs to be manually done due to build changes
done in the sairedis submodule. Specifically, Debian build profiles are
now being used instead of dpkg build targets, and dbgsym packages are
being used instead of dbg packages. Because of this, there needs to be
changes on the sonic-buildimage side for this.
This submodule update brings in the following changes:
ce8f642 [vs] Use boost join to concatenate switch types in config (#1266)
d6055a2 [vslib]: Temporaily map DPU switch type to NVDA_MBF2H536C (#1259)
e1cdb4d [CodeQL]: Use dependencies with relevant versions in azp template. (#1262)
c08f9a2 [CI]: Fix collect log error in azp template. (#1260)
eed856c [CodeQL]: Fix syncd compilation in azp template. (#1261)
a3f1f1a Reland 'Make changes to building and packaging sairedis (#1116)' (#1194)
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Add support for a separate DEB_BUILD_PROFILES environment variable, to
be able to set build profiles. This may be used to specify whether
python 2 bindings/libraries should be built, or what configuration
options should be specified for a package.
This also makes it easier to append/remove build profiles from our rules
files, which will be needed for the sairedis build.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Make syncd rpc docker which supports sai-ptf v2
local bulild the target
NOSTRETCH=y NOJESSIE=y make configure PLATFORM=vs
NOSTRETCH=y NOJESSIE=y NOBULLSEYE=y SAITHRIFT_V2=y make target/docker-ptf-sai.gz
NOSTRETCH=y NOJESSIE=y make configure PLATFORM=vs
NOSTRETCH=y NOJESSIE=y NOBULLSEYE=y make target/docker-ptf.gz
NOSTRETCH=y NOJESSIE=y make configure PLATFORM=broadcom
NOSTRETCH=y NOJESSIE=y ENABLE_SYNCD_RPC=y SAITHRIFT_V2=y make target/docker-syncd-brcm-rpcv2.gz
NOSTRETCH=y NOJESSIE=y ENABLE_SYNCD_RPC=y SAITHRIFT_V2=y make target/docker-saiserverv2-brcm.gz
Test done:
#12619
NOSTRETCH=y NOJESSIE=y make configure PLATFORM=broadcom
NOSTRETCH=y NOJESSIE=y ENABLE_SYNCD_RPC=y make target/docker-syncd-brcm-rpc.gz
NOSTRETCH=y NOJESSIE=y ENABLE_SYNCD_RPC=y make target/docker-saiserver-brcm.gz
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
#### Why I did it
Fix the build with updated sairedis
#### How I did it
Specify nopython2 for syncd and fixed a copy paste mistake for libsairedis
#### How to verify it
Run build with updated sairedis
This is to improve the readability of ASAN reports. The debug package adds function names and source code references to the backtrace (currently, there are only binary addresses of functions)
Another way to address this issue is to build the image with "INSTALL_DEBUG_TOOLS=y". The downside of this approach is that the image size and compilation time are unnecessarily big. Also, the idea is to make the "ENABLE_ASAN" self-sufficient, which would not be the case for this approach.
- Why I did it
To improve the readability of asan logs.
- How I did it
Added SYNCD_DBG and SWSS_DBG to corresponding docker images for ASAN_ENABLE=y build
- How to verify it
Add artificial memory leak
Build with ASAN_ENABLE=y
Test the image and check the ASAN report
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
Introduce new sonic-buildimage images for Broadcom DNX ASIC family.
sonic-broadcom-dnx.bin
sonic-aboot-broadcom-dnx.swi
How I did it
NO CHANGE to existing make commands
make init; make configure PLATFORM=broadcom; make target/sonic-aboot-broadcom.swi; make target/sonic-broadcom.bin
The difference now is that it will result in new broadcom images for DNX asic family as well.
sonic-broadcom.bin, sonic-broadcom-dnx.bin
sonic-aboot-broadcom.swi, sonic-aboot-broadcom-dnx.swi
Note: This PR also adds support for Broadcom SAI 5.0 (based on 1.8 SAI ) for DNX based platform + changes in platform x86_64-arista_7280cr3_32p4 bcm config files and platform_env.conf files
make swss build depends only on libsairedis instead of syncd. This allows to build swss without depending
on vendor sai library.
Currently, libsairedis build also buils syncd which requires vendor SAI lib. This makes difficult to build
swss docker in buster while still keeping syncd docker in stretch, as swss requires libsairedis which also
build syncd and requires vendor to provide SAI for buster. As swss docker does not really contain syncd
binary, so it is not necessary to build syncd for swss docker.
* [submodule]: update sonic-sairedis
* ccbb3bc 2020-06-28 | add option to build without syncd (HEAD, origin/master, origin/HEAD) [Guohan Lu]
* 4247481 2020-06-28 | install saidiscovery into syncd package [Guohan Lu]
* 61b8e8e 2020-06-26 | Revert "sonic-sairedis: Add support to sonic-sairedis for gearbox phys (#624)" (#630) [Danny Allen]
* 85e543c 2020-06-26 | add a README to tests directory to describe how to run 'make check' (#629) [Syd Logan]
* 2772f15 2020-06-26 | sonic-sairedis: Add support to sonic-sairedis for gearbox phys (#624) [Syd Logan]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
