### Why I did it
Remove UpdateGraphService feature from sonic image. The goal is to simplify the bootup process.
### How I did it
Remove updategraph service and updategraph script.
Update all related services, replace updategraph.service with config-setup.service.
#### How to verify it
Build and install new image, load minigraph and check all the services.
Why I did it
We Nokia took the task to make macsec container to work with bookworm.
This PR requires another PR for sonic-wpa-supplicant(sonic-net/sonic-wpa-supplicant#80) to be in first. Otherwise sonic build will fail for bookworm wpasupplicant debian package.
How I did it
How to verify it
After build and boot up system with new image, macsec container should run with bookworm. Corresponding mgmt macsec suite will work here.
Which release branch to backport (provide reason below if selected)
Tested branch (Please provide the tested image version)
Tested with latest master of sonic-buildimage. Built vs image and loaded into vs testing environment. Code pass with macsec test suites.
Description for the changelog
Make macsec container to build with bookworm
### Why I did it
Privileges and volumes were incorrectly set in macsec container. Privileged flag is set to false and volumes are not mounted properly.
```
admin@vlab-01:~$ docker inspect macsec0 | grep Privi
"Privileged": false,
admin@vlab-01:~$ docker inspect macsec0 | grep -A 10 Binds
"Binds": [
"/var/run/redis0:/var/run/redis:rw",
"/var/run/redis-chassis:/var/run/redis-chassis:ro",
"/usr/share/sonic/device/x86_64-nokia_ixr7250e_36x400g-r0/Nokia-IXR7250E-36x100G/0:/usr/share/sonic/hwsku:ro",
"/var/run/redis0/:/var/run/redis0/:rw",
"/usr/share/sonic/device/x86_64-nokia_ixr7250e_36x400g-r0:/usr/share/sonic/platform:ro"
],
```
### How I did it
#### How to verify it
Make sure privileged settings remain unchanged and make sure volumes are properly mounted
```
admin@vlab-01:~$ docker inspect macsec | grep Privi
"Privileged": false,
admin@vlab-01:~$ docker inspect macsec | grep -A 10 Binds
"Binds": [
"/etc/timezone:/etc/timezone:ro",
"/var/run/redis:/var/run/redis:rw",
"/var/run/redis-chassis:/var/run/redis-chassis:ro",
"/etc/fips/fips_enable:/etc/fips/fips_enable:ro",
"/usr/share/sonic/templates/rsyslog-container.conf.j2:/usr/share/sonic/templates/rsyslog-container.conf.j2:ro",
"/etc/sonic:/etc/sonic:ro",
"/host/warmboot:/var/warmboot",
"/usr/share/sonic/device/x86_64-kvm_x86_64-r0/Force10-S6000/:/usr/share/sonic/hwsku:ro",
"/usr/share/sonic/device/x86_64-kvm_x86_64-r0:/usr/share/sonic/platform:ro"
],
```
#### Why I did it
To fix the timezone sync issue between the containers and the host. If a certain timezone has been configured on the host (SONIC) then the expectation is to reflect the same across all the containers.
This will fix [Issue:13046](https://github.com/sonic-net/sonic-buildimage/issues/13046).
For instance, a PST timezone has been set on the host and if the user checks the link flap logs (inside the FRR), it shows the UTC timestamp. Ideally, it should be PST.
Why I did it
If the SWSS services was restarted, the MACsec service should also be restarted. Otherwise the data in wpa_supplicant and orchagent will not be consistent.
How I did it
Add dependency in docker-macsec.mk.
How to verify it
Manually check by 'sudo service swss restart'.
The MACsec container should be started after swss, the syslog will look like
Sep 8 14:36:29.562953 sonic INFO swss.sh[9661]: Starting existing swss container with HWSKU Force10-S6000
Sep 8 14:36:30.024399 sonic DEBUG container: container_start: BEGIN
...
Sep 8 14:36:33.391706 sonic INFO systemd[1]: Starting macsec container...
Sep 8 14:36:33.392925 sonic INFO systemd[1]: Starting Management Framework container...
Signed-off-by: Ze Gan <ganze718@gmail.com>
Why I did it
Missing the dependency of macsecmgrd in swss so that the MACsec feature cannot be enabled.
How I did it
Add SWSS dependency in docker-macsec.mk
How to verify it
Check the Azp of sonic-mgmt
All docker containers will be built as Buster containers, from a Buster
slave. The base image and remaining packages that are installed onto the
host system will be built for Bullseye, from a Bullseye slave.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
This PR is part of SONiC Application Extension
Depends on #5938
- Why I did it
To provide an infrastructure change in order to support SONiC Application Extension feature.
- How I did it
Label every installable SONiC Docker with a minimal required manifest and auto-generate packages.json file based on
installed SONiC images.
- How to verify it
Build an image, execute the following command:
admin@sonic:~$ docker inspect docker-snmp:1.0.0 | jq '.[0].Config.Labels["com.azure.sonic.manifest"]' -r | jq
Cat /var/lib/sonic-package-manager/packages.json file to verify all dockers are listed there.
The HLD about MACsec feature is at :
https://github.com/Azure/SONiC/blob/master/doc/macsec/MACsec_hld.md
- How to verify it
This PR doesn't set MACsec container automatically start, You should manually start the container by docker run docker-macsec
wpa_supplicant binary can be found at MACsec container.
This PR depends on the PR, WPA_SUPPLICANT, and The MACsec container will be set as automatically start by later PR.
Signed-off-by: zegan <zegan@microsoft.com>
