Why I did it
pkgs.k8s.io: Introducing Kubernetes Community-Owned Package Repositories | Kubernetes
For 1.22.2 k8s packages, source repo has been deprecated, going to store these packages in sonic build storage for installation to mitigate the issue. Will migrate to new repo when we are ready to upgrade k8s version.
Work item tracking
Microsoft ADO (number only): 27075924
How I did it
Store the 1.22.2 k8s package in sonic build storage and install the package there.
How to verify it
"apt list" to check if it's installed.
* [baseimage]: Update openssh to 1:8.4p1-5+deb11u2 (#16826)
Openssh in Debian Bullseye has been updated to 1:8.4p1-5+deb11u2 to fix CVE-2023-38408.
Since we're building openssh with some patches, we need to update our version as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Remove main deb installation for derived deb build (#16859)
* Don't install dependencies of derived debs
When "building" a derived deb package, don't install the dependencies of
the package into the container. It's not needed at this stage.
* Re-add openssh-client and openssh-sftp-server as derived debs
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Re-add missing dependency for derived debs. (#16896)
* Re-add missing dependency for derived debs.
My previous changed removed the whole dependency on the main deb
existing, not just the installation of the main deb. Fix this by
readding a dependency on the main deb being built/pulled from cache.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Add the kernel and initramfs as dependencies for RFS build
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Update phy-credo script
1. Fix import SonicV2Connector
2. Determine medium type based on compliance code
3. Fix runtime error on unrelated platforms
* Use the 'raw' patch of phy-credo package
#### Why I did it
After k8s upgrade a container, k8s can only know the container is running, don't know the service's status inside container. So we need a probe inside container, k8s will call the probe to check whether the container is really ready.
##### Work item tracking
- Microsoft ADO **(number only)**: 22453004
#### How I did it
Add a health check probe inside config engine container, the probe will check whether the start service exit normally or not if the start service exists and call the python script to do container self-related specific checks if the script is there. The python script should be implemented by feature owner if it's needed.
more details: [design doc](https://github.com/sonic-net/SONiC/blob/master/doc/kubernetes/health-check.md)
#### How to verify it
Check path /usr/bin/readiness_probe.sh inside container.
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [x] 202205
- [x] 202211
#### Tested branch (Please provide the tested image version)
- [x] 20220531.28
Why I did it
To reduce the container's dependency from host system
Work item tracking
Microsoft ADO (number only):
17713469
How I did it
Move the k8s container startup script to config engine container, other than mount it from host.
How to verify it
Check file path(/usr/share/sonic/scripts/container_startup.py) inside config engine container.
Signed-off-by: Yun Li <yunli1@microsoft.com>
Co-authored-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* [buildsystem] Fix hiredis package version: 0.14.1-1 (#15461)
- Why I did it
To fix hiredis compilation
- How I did it
Changed package version: 0.14.0-3~bpo9+1 -> 0.14.1-1
- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
* Update Makefile
---------
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Co-authored-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
Backport PR #14907 to 202205 branch
In order to reduce sonic build time, there is an option to acquire sonic slave docker(s) from artifact server (reduce sonic make configure time).
Current implementation supports only convention of:
<REGISTRY_SERVER>:<REGISTRY_PORT>/<SLAVE_BASE_IMAGE>:<SLAVE_BASE_TAG>
In case the SLAVE_BASE_IMAGE appear in internal path inside the server, the convention should be like that:
<REGISTRY_SERVER>:<REGISTRY_PORT><REGISTRY_SERVER_PATH>/<SLAVE_BASE_IMAGE>:<SLAVE_BASE_TAG>
When REGISTRY_SERVER_PATH (that is set on rules/config) will have to start with "/".
If REGISTRY_SERVER_PATH will not be set, the behavior will remain the same it works today.
Work item tracking
Microsoft ADO (number only):
How I did it
Add ability to set REGISTRY_SERVER_PATH and update the code for docker image tag and docker image pull accordingly
How to verify it
Use sonic slave docker image from artifact server in which the image is kept in internal folder and make sure it consume it.
Why I did it
Support to add SONiC OS Version in device info.
It will be used to display the version info in the SONiC command "show version". The version is used to do the FIPS certification. We do not do the FIPS certification on a specific release, but on the SONiC OS Version.
SONiC Software Version: SONiC.master-13812.218661-7d94c0c28
SONiC OS Version: 11
Distribution: Debian 11.6
Kernel: 5.10.0-18-2-amd64
How I did it
#### Why I did it
Update sonic-swss-common submodule pointer to include the following:
* 55fd28a [202205] Non recursive automake and Debian packaging changes (sonic-net/sonic-swss-common#772)
Why I did it
Find a new bug on kubelet side. The kubernetes-cni plug-in was removed in #12997, the reason is that the plug-in will be auto installed when install kubeadm, and will report error if we don't remove the install code. But after removal, the version auto installed is different from what we installed before. This will affect the kubelet action in some scenarios we don't find before. Need to install it by another way.
How I did it
Install kubernetes-cni==0.8.7-00 before install kubeadm
How to verify it
Flannel binary will be installed under /opt/cni/bin/ folder
Why I did it
Cherry pick from #13097
[Build] Support Debian snapshot mirror to improve build stability
It is to enhance the reproducible build, supports the Debian snapshot mirror. It guarantees all the docker images using the same Debian mirror snapshot and fixes the temporary build failure which is caused by remote Debain mirror indexes changed during the build. It is also to fix the version conflict issue caused by no fixed versions of some of the Debian packages.
How I did it
Add a new feature to support the Debian snapshot mirror.
How to verify it
* [Security] Upgrade the openssl version to 1.1.1n-0+deb11u4+fips (#13737)
Why I did it
[Security] Upgrade the openssl version to 1.1.1n-0+deb11u4+fips
f6df7303d8 Update expired certs.
84540b59c1 CVE-2022-2068
f763d8a93e Prepare 1.1.1n-0+deb11u2
576562cebe CVE-2022-1292
How I did it
Upgrade the OpenSSL version
* [Security] Upgrade OpenSSL version for armhf
Why I did it
[FIPS] Upgrade Open-SymCrypt version to 0.6
Improve the SymCrypt performance
Support to download the debug packages from storage account in version 0.6.
How I did it
Upgrade to symcrypt-openssl from version 0.4 to version 0.6
Changes in https://github.com/sonic-net/sonic-fips:
0c29b23 Upgrade the submodules: SymCrypt and SymCrypt-OpenSSL #40
80022f3 Fix the ARM64 build failure
2e76a3d Disable the unsupported tests
Other changes will be added as well:
55b8e0a Merge pull request #35 from xumia/change-license
120c1a7 Upgrade SymCrypt and SymCrypt-OpenSSL
2f9c084 Merge pull request #39 from liuh-80/dev/liuh/update-openssh-version
a3be6c5 Revert openssh version
e02fa1e Update fips version
How to verify it
cherry-pick #12761
Make syncd rpc docker which supports sai-ptf v2
Part of previous PR #11610
local bulild the target
NOSTRETCH=y NOJESSIE=y make configure PLATFORM=broadcom NOSTRETCH=y NOJESSIE=y ENABLE_SYNCD_RPC=y SAITHRIFT_V2=y make target/docker-syncd-brcm-rpcv2.gz NOSTRETCH=y NOJESSIE=y ENABLE_SYNCD_RPC=y SAITHRIFT_V2=y make target/docker-saiserverv2-brcm.gz
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* [openssh]: Restore behavior of ClientAliveCountMax=0
OpenSSH 8.2 changed the behavior of ClientAliveCountMax=0 such that
setting it to 0 disables connection-killing entirely when the connection
is idle. Revert that change.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Update openssh make file, add missing dependency to libnl.
#### Why I did it
Openssh indirectly depends on libnl.
Another PR #12447 need add new patch to openssh, after adding new patch to openssh, PR build failed with libnl missing error.
#### How I did it
Update openssh make file, add missing dependency to libnl.
#### How to verify it
Pass all test case
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Update openssh make file, add missing dependency to libnl.
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
* Add smartmontools to pmon docker
* Set smartmontools to install version 7.2-1 in pmon to match host; clean up smartmontools build files
* Add comments on smartmontools version for both host and pmon
Why I did it
When sending a PR only CI change, as expected, the target target/python-wheels/buster/sonic_config_engine-1.0-py2-none-any.whl should be from the cache, because the depended files were not changed, but it rebuilt.
How I did it
Sort the files by name.
Why I did it
If the SWSS services was restarted, the MACsec service should also be restarted. Otherwise the data in wpa_supplicant and orchagent will not be consistent.
How I did it
Add dependency in docker-macsec.mk.
How to verify it
Manually check by 'sudo service swss restart'.
The MACsec container should be started after swss, the syslog will look like
Sep 8 14:36:29.562953 sonic INFO swss.sh[9661]: Starting existing swss container with HWSKU Force10-S6000
Sep 8 14:36:30.024399 sonic DEBUG container: container_start: BEGIN
...
Sep 8 14:36:33.391706 sonic INFO systemd[1]: Starting macsec container...
Sep 8 14:36:33.392925 sonic INFO systemd[1]: Starting Management Framework container...
Signed-off-by: Ze Gan <ganze718@gmail.com>
Why I did it
Migrate FRR to bullseye
How I did it
Makefile and docker config changes to refer to bullseye instead of buster.
How to verify it
Build bullseye frr docker.
Co-authored-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
* [snmpd]: Update to 5.9+dfsg-4+deb11u1 to match Debian version
This brings in some security fixes.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Update snmpd makefile
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Remove binNMU for snmpd
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Cherry pick PR https://github.com/sonic-net/sonic-buildimage/pull/10825 to 202205 branch
#### Why I did it
Fix sonic-db-cli high CPU usage on SONiC startup issue: https://github.com/sonic-net/sonic-buildimage/issues/10218
ETA of this issue will be 2022/05/31
#### How I did it
Re-write sonic-cli with c++ in sonic-swss-common: https://github.com/sonic-net/sonic-swss-common/pull/607
Modify swss-common rules and slave.mk to install c++ version sonic-db-cli.
#### How to verify it
Pass all E2E test scenario.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
Build and install c++ version sonic-db-cli from swss-common.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
Add support for reacting to speed change between 40G and 100G in CONFIG_DB
Fix a bug on optical bit setting.
Avoid the random error in shutdown for issue: aristanetworks/sonic#40
Avoid to run on SmartsvilleBkMs, which depends on a different driver (credo-sai).
How I did it
How to verify it
Verified on the duts that the commands printed in the log are matching the expectation and the interfaces are up.
Why I did it
src/dhcprelay is being split out to be its own submodule.
How I did it
Add existing dhcprelay commits into the new repo.
Clean up Makefile (sonic-net/sonic-dhcp-relay@772625f)
Add LGTM config (sonic-net/sonic-dhcp-relay@5cc0889)
Add Azure pipeline config (sonic-net/sonic-dhcp-relay@c79cdb7)
Add submodule reference, renaming most references of dhcp6relay to dhcprelay (to reflect that this will not just be for IPv6 in the future).
How to verify it
Successful run of LGTM is tested at sonic-net/sonic-dhcp-relay#4. Failure run of LGTM is tested at sonic-net/sonic-dhcp-relay#3.
Azure pipeline is run for each commit/PR, and will build for amd64, armhf, and arm64. UT/code coverage check is not yet done.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Upgrade sonic fips packages to version 0.2
Upgrade openssl version from 1.1.1k-1+deb11u1+fips to 1.1.1n-0+deb11u3+fips
Upgrade openssh version from 8.4p1-5+fips to 8.4p1-5+deb11u1+fips
How I did it
Change the makefile.
- Why I did it
To optimize fast-reboot. Teamd can be stopped after bgp is stopped and after swss is stopped because the last LACP packet can be sent still since syncd is still running. Saves 15 sec on shutdown.
- How I did it
Defined in the manifest for teamd to be stopped after swss
- How to verify it
Run it on the switch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
Cherry-pick: #11405
Fix the openssh build issue, upgrade from 8.4p1-5 to 8.4p1-5+deb11u1.
https://dev.azure.com/mssonic/build/_build/results?buildId=120209&view=logs&j=88ce9a53-729c-5fa9-7b6e-3d98f2488e3f&t=8d99be27-49d0-54d0-99b1-cfc0d47f0318
+ sudo dpkg --root=./fsroot-broadcom -i target/debs/bullseye/openssh-server_8.4p1-5_amd64.deb
dpkg: warning: downgrading openssh-server from 1:8.4p1-5+deb11u1 to 1:8.4p1-5
(Reading database ... 44818 files and directories currently installed.)
Preparing to unpack .../openssh-server_8.4p1-5_amd64.deb ...
Unpacking openssh-server (1:8.4p1-5) over (1:8.4p1-5+deb11u1) ...
dpkg: dependency problems prevent configuration of openssh-server:
openssh-server depends on openssh-client (= 1:8.4p1-5); however:
Version of openssh-client on system is 1:8.4p1-5+deb11u1.
dpkg: error processing package openssh-server (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
openssh-server
+ clean_sys
How I did it
Upgrade openssh from 8.4p1-5 to 8.4p1-5+deb11u1.
* [sflow + dropmon] added INCLUDE_SFLOW_DROPMON flag, added patches for hsflowd
*Added a capability of monitoring dropped packets for the sFlow daemon in order to improve network - monitoring, diagnostic, and troubleshooting. The drop monitor service allows the sFlow daemon to export another type of sample - dropped packets as Discard samples alongside Counter samples and Packet Flow samples.
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
This PR is a backport of #10950 and a fix for it #11227
- Why I did it
To not build python2 pysairedis on bullseye
- How I did it
Cherry-picked above PRs from master
- How to verify it
Build
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
