DellEMC: S6000,S6100 SFP refactor (#9016)
* DellEMC: S6000,S6100 SFP refactor
This commit is contained in:
Aravind Mani
Judy Joseph
parent
3d3eb1fb53
commit
f907f19064
@ -9,432 +9,74 @@
|
|||||||
#############################################################################
|
#############################################################################
|
||||||
|
|
||||||
try:
|
try:
|
||||||
import re
|
|
||||||
import struct
|
|
||||||
import time
|
import time
|
||||||
|
from sonic_platform_base.sonic_xcvr.sfp_optoe_base import SfpOptoeBase
|
||||||
import fcntl
|
import fcntl
|
||||||
from sonic_platform_base.sfp_base import SfpBase
|
|
||||||
from sonic_platform_base.sonic_sfp.sff8436 import sff8436InterfaceId
|
|
||||||
from sonic_platform_base.sonic_sfp.sff8436 import sff8436Dom
|
|
||||||
except ImportError as e:
|
except ImportError as e:
|
||||||
raise ImportError(str(e) + "- required module not found")
|
raise ImportError(str(e) + "- required module not found")
|
||||||
|
|
||||||
|
SFP_LOCK_FILE="/etc/sonic/sfp_lock"
|
||||||
|
|
||||||
PAGE_OFFSET = 0
|
class Sfp(SfpOptoeBase):
|
||||||
KEY_OFFSET = 1
|
|
||||||
KEY_WIDTH = 2
|
|
||||||
FUNC_NAME = 3
|
|
||||||
|
|
||||||
INFO_OFFSET = 128
|
|
||||||
DOM_OFFSET = 0
|
|
||||||
DOM_OFFSET1 = 384
|
|
||||||
|
|
||||||
QSFP_CONTROL_OFFSET = 86
|
|
||||||
QSFP_POWEROVERRIDE_OFFSET = 93
|
|
||||||
|
|
||||||
cable_length_tup = ('Length(km)', 'Length OM3(2m)', 'Length OM2(m)',
|
|
||||||
'Length OM1(m)', 'Length Cable Assembly(m)')
|
|
||||||
|
|
||||||
compliance_code_tup = (
|
|
||||||
'10/40G Ethernet Compliance Code',
|
|
||||||
'SONET Compliance codes',
|
|
||||||
'SAS/SATA compliance codes',
|
|
||||||
'Gigabit Ethernet Compliant codes',
|
|
||||||
'Fibre Channel link length/Transmitter Technology',
|
|
||||||
'Fibre Channel transmission media',
|
|
||||||
'Fibre Channel Speed')
|
|
||||||
|
|
||||||
info_dict_keys = ['type', 'hardware_rev', 'serial',
|
|
||||||
'manufacturer', 'model', 'connector',
|
|
||||||
'encoding', 'ext_identifier', 'ext_rateselect_compliance',
|
|
||||||
'cable_type', 'cable_length', 'nominal_bit_rate',
|
|
||||||
'specification_compliance', 'type_abbrv_name', 'vendor_date',
|
|
||||||
'vendor_oui', 'application_advertisement']
|
|
||||||
|
|
||||||
dom_dict_keys = ['rx_los', 'tx_fault', 'reset_status',
|
|
||||||
'power_lpmode', 'tx_disable', 'tx_disable_channel',
|
|
||||||
'temperature', 'voltage', 'rx1power',
|
|
||||||
'rx2power', 'rx3power', 'rx4power',
|
|
||||||
'tx1bias', 'tx2bias', 'tx3bias',
|
|
||||||
'tx4bias', 'tx1power', 'tx2power',
|
|
||||||
'tx3power', 'tx4power']
|
|
||||||
|
|
||||||
threshold_dict_keys = ['temphighalarm', 'temphighwarning',
|
|
||||||
'templowalarm', 'templowwarning',
|
|
||||||
'vcchighalarm', 'vcchighwarning',
|
|
||||||
'vcclowalarm', 'vcclowwarning',
|
|
||||||
'rxpowerhighalarm', 'rxpowerhighwarning',
|
|
||||||
'rxpowerlowalarm', 'rxpowerlowwarning',
|
|
||||||
'txpowerhighalarm', 'txpowerhighwarning',
|
|
||||||
'txpowerlowalarm', 'txpowerlowwarning',
|
|
||||||
'txbiashighalarm', 'txbiashighwarning',
|
|
||||||
'txbiaslowalarm', 'txbiaslowwarning']
|
|
||||||
|
|
||||||
sff8436_parser = {
|
|
||||||
'reset_status': [DOM_OFFSET, 2, 1, 'parse_dom_status_indicator'],
|
|
||||||
'rx_los': [DOM_OFFSET, 3, 1, 'parse_dom_tx_rx_los'],
|
|
||||||
'tx_fault': [DOM_OFFSET, 4, 1, 'parse_dom_tx_fault'],
|
|
||||||
'tx_disable': [DOM_OFFSET, 86, 1, 'parse_dom_tx_disable'],
|
|
||||||
'power_lpmode': [DOM_OFFSET, 93, 1, 'parse_dom_power_control'],
|
|
||||||
'power_override': [DOM_OFFSET, 93, 1, 'parse_dom_power_control'],
|
|
||||||
'Temperature': [DOM_OFFSET, 22, 2, 'parse_temperature'],
|
|
||||||
'Voltage': [DOM_OFFSET, 26, 2, 'parse_voltage'],
|
|
||||||
'ChannelMonitor': [DOM_OFFSET, 34, 16, 'parse_channel_monitor_params'],
|
|
||||||
|
|
||||||
'cable_type': [INFO_OFFSET, -1, -1, 'parse_sfp_info_bulk'],
|
|
||||||
'cable_length': [INFO_OFFSET, -1, -1, 'parse_sfp_info_bulk'],
|
|
||||||
'connector': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'type': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'encoding': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'ext_identifier': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'ext_rateselect_compliance':
|
|
||||||
[INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'nominal_bit_rate': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'specification_compliance':
|
|
||||||
[INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'type_abbrv_name': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'manufacturer': [INFO_OFFSET, 20, 16, 'parse_vendor_name'],
|
|
||||||
'vendor_oui': [INFO_OFFSET, 37, 3, 'parse_vendor_oui'],
|
|
||||||
'model': [INFO_OFFSET, 40, 16, 'parse_vendor_pn'],
|
|
||||||
'hardware_rev': [INFO_OFFSET, 56, 2, 'parse_vendor_rev'],
|
|
||||||
'serial': [INFO_OFFSET, 68, 16, 'parse_vendor_sn'],
|
|
||||||
'vendor_date': [INFO_OFFSET, 84, 8, 'parse_vendor_date'],
|
|
||||||
'ModuleThreshold': [DOM_OFFSET1, 128, 24, 'parse_module_threshold_values'],
|
|
||||||
'ChannelThreshold': [DOM_OFFSET1, 176, 16, 'parse_channel_threshold_values'],
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
class Sfp(SfpBase):
|
|
||||||
"""
|
"""
|
||||||
DELLEMC Platform-specific Sfp class
|
DELLEMC Platform-specific Sfp class
|
||||||
"""
|
"""
|
||||||
|
|
||||||
def __init__(self, index, sfp_type, eeprom_path,
|
def __init__(self, index, sfp_type, eeprom_path,
|
||||||
sfp_control, sfp_ctrl_idx):
|
sfp_control, sfp_ctrl_idx):
|
||||||
SfpBase.__init__(self)
|
SfpOptoeBase.__init__(self)
|
||||||
self.sfp_type = sfp_type
|
self.sfp_type = sfp_type
|
||||||
self.index = index + 1
|
self.index = index + 1
|
||||||
self.eeprom_path = eeprom_path
|
self.eeprom_path = eeprom_path
|
||||||
self.sfp_control = sfp_control
|
self.sfp_control = sfp_control
|
||||||
self.sfp_ctrl_idx = sfp_ctrl_idx
|
self.sfp_ctrl_idx = sfp_ctrl_idx
|
||||||
self.sfpInfo = sff8436InterfaceId()
|
|
||||||
self.sfpDomInfo = sff8436Dom()
|
|
||||||
|
|
||||||
def _read_eeprom_bytes(self, eeprom_path, offset, num_bytes):
|
def get_eeprom_path(self):
|
||||||
eeprom_raw = []
|
return self.eeprom_path
|
||||||
try:
|
|
||||||
eeprom = open(eeprom_path, mode="rb", buffering=0)
|
|
||||||
except IOError:
|
|
||||||
return None
|
|
||||||
|
|
||||||
for i in range(0, num_bytes):
|
def get_name(self):
|
||||||
eeprom_raw.append("0x00")
|
return "QSFP+ or later"
|
||||||
|
|
||||||
try:
|
def read_eeprom(self, offset, num_bytes):
|
||||||
eeprom.seek(offset)
|
|
||||||
raw = eeprom.read(num_bytes)
|
|
||||||
except IOError:
|
|
||||||
eeprom.close()
|
|
||||||
return None
|
|
||||||
|
|
||||||
raw = bytearray(raw)
|
|
||||||
try:
|
|
||||||
for n in range(0, num_bytes):
|
|
||||||
eeprom_raw[n] = hex(raw[n])[2:].zfill(2)
|
|
||||||
except BaseException:
|
|
||||||
eeprom.close()
|
|
||||||
return None
|
|
||||||
|
|
||||||
eeprom.close()
|
|
||||||
return eeprom_raw
|
|
||||||
|
|
||||||
def _get_eeprom_data(self, eeprom_key):
|
|
||||||
eeprom_data = None
|
|
||||||
page_offset = None
|
|
||||||
|
|
||||||
if (self.sfpInfo is None):
|
|
||||||
return None
|
|
||||||
|
|
||||||
SFP_LOCK_FILE="/etc/sonic/sfp_lock"
|
|
||||||
try:
|
try:
|
||||||
fd = open(SFP_LOCK_FILE, "r")
|
fd = open(SFP_LOCK_FILE, "r")
|
||||||
except IOError as e:
|
except IOError as e:
|
||||||
print("Error: unable to open file: %s" % str(e))
|
print("Error: unable to open file: %s" % str(e))
|
||||||
return None
|
return None
|
||||||
|
try:
|
||||||
|
with open(self.get_eeprom_path(), mode='rb', buffering=0) as f:
|
||||||
fcntl.flock(fd, fcntl.LOCK_EX)
|
fcntl.flock(fd, fcntl.LOCK_EX)
|
||||||
self.set_modsel()
|
self.set_modsel()
|
||||||
|
f.seek(offset)
|
||||||
page_offset = sff8436_parser[eeprom_key][PAGE_OFFSET]
|
read_bytes=f.read(num_bytes)
|
||||||
eeprom_data_raw = self._read_eeprom_bytes(
|
|
||||||
self.eeprom_path,
|
|
||||||
(sff8436_parser[eeprom_key][PAGE_OFFSET] +
|
|
||||||
sff8436_parser[eeprom_key][KEY_OFFSET]),
|
|
||||||
sff8436_parser[eeprom_key][KEY_WIDTH])
|
|
||||||
if (eeprom_data_raw is not None):
|
|
||||||
# Offset 128 is used to retrieve sff8436InterfaceId Info
|
|
||||||
# Offset 0 is used to retrieve sff8436Dom Info
|
|
||||||
if (page_offset == 128):
|
|
||||||
eeprom_data = getattr(
|
|
||||||
self.sfpInfo, sff8436_parser[eeprom_key][FUNC_NAME])(
|
|
||||||
eeprom_data_raw, 0)
|
|
||||||
else:
|
|
||||||
eeprom_data = getattr(
|
|
||||||
self.sfpDomInfo, sff8436_parser[eeprom_key][FUNC_NAME])(
|
|
||||||
eeprom_data_raw, 0)
|
|
||||||
|
|
||||||
fcntl.flock(fd, fcntl.LOCK_UN)
|
fcntl.flock(fd, fcntl.LOCK_UN)
|
||||||
return eeprom_data
|
return bytearray(read_bytes)
|
||||||
|
except (OSError, IOError):
|
||||||
def _strip_unit_from_str(self, value_str):
|
|
||||||
match = re.match(r'(.*)C$|(.*)Volts$|(.*)mA$|(.*)dBm$', value_str)
|
|
||||||
if match:
|
|
||||||
for value in match.groups():
|
|
||||||
if value is not None:
|
|
||||||
return float(value)
|
|
||||||
|
|
||||||
return None
|
return None
|
||||||
|
|
||||||
def get_transceiver_info(self):
|
def write_eeprom(self, offset, num_bytes, write_buffer):
|
||||||
"""
|
try:
|
||||||
Retrieves transceiver info of this SFP
|
fd = open(SFP_LOCK_FILE, "r")
|
||||||
"""
|
except IOError as e:
|
||||||
transceiver_info_dict = {}
|
print("Error: unable to open file: %s" % str(e))
|
||||||
compliance_code_dict = {}
|
|
||||||
transceiver_info_dict = dict.fromkeys(info_dict_keys, 'N/A')
|
|
||||||
|
|
||||||
# BaseInformation
|
|
||||||
iface_data = self._get_eeprom_data('type')
|
|
||||||
if (iface_data is not None):
|
|
||||||
connector = iface_data['data']['Connector']['value']
|
|
||||||
encoding = iface_data['data']['EncodingCodes']['value']
|
|
||||||
ext_id = iface_data['data']['Extended Identifier']['value']
|
|
||||||
rate_identifier = iface_data['data']['RateIdentifier']['value']
|
|
||||||
identifier = iface_data['data']['type']['value']
|
|
||||||
type_abbrv_name=iface_data['data']['type_abbrv_name']['value']
|
|
||||||
bit_rate = str(
|
|
||||||
iface_data['data']['Nominal Bit Rate(100Mbs)']['value'])
|
|
||||||
|
|
||||||
for key in compliance_code_tup:
|
|
||||||
if key in iface_data['data']['Specification compliance']['value']:
|
|
||||||
compliance_code_dict[key] = iface_data['data']['Specification compliance']['value'][key]['value']
|
|
||||||
for key in cable_length_tup:
|
|
||||||
if key in iface_data['data']:
|
|
||||||
cable_type = key
|
|
||||||
cable_length = str(iface_data['data'][key]['value'])
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Vendor Date
|
|
||||||
vendor_date_data = self._get_eeprom_data('vendor_date')
|
|
||||||
if (vendor_date_data is not None):
|
|
||||||
vendor_date = vendor_date_data['data']['VendorDataCode(YYYY-MM-DD Lot)']['value']
|
|
||||||
else:
|
|
||||||
return None
|
return None
|
||||||
|
|
||||||
# Vendor Name
|
try:
|
||||||
vendor_name_data = self._get_eeprom_data('manufacturer')
|
with open(self.get_eeprom_path(), mode='r+b', buffering=0) as f:
|
||||||
if (vendor_name_data is not None):
|
fcntl.flock(fd, fcntl.LOCK_EX)
|
||||||
vendor_name = vendor_name_data['data']['Vendor Name']['value']
|
self.set_modsel()
|
||||||
else:
|
f.seek(offset)
|
||||||
return transceiver_info_dict
|
f.write(write_buffer[0:num_bytes])
|
||||||
|
fcntl.flock(fd, fcntl.LOCK_UN)
|
||||||
# Vendor OUI
|
except (OSError, IOError):
|
||||||
vendor_oui_data = self._get_eeprom_data('vendor_oui')
|
return False
|
||||||
if (vendor_oui_data is not None):
|
return True
|
||||||
vendor_oui = vendor_oui_data['data']['Vendor OUI']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Vendor PN
|
|
||||||
vendor_pn_data = self._get_eeprom_data('model')
|
|
||||||
if (vendor_pn_data is not None):
|
|
||||||
vendor_pn = vendor_pn_data['data']['Vendor PN']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Vendor Revision
|
|
||||||
vendor_rev_data = self._get_eeprom_data('hardware_rev')
|
|
||||||
if (vendor_rev_data is not None):
|
|
||||||
vendor_rev = vendor_rev_data['data']['Vendor Rev']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Vendor Serial Number
|
|
||||||
vendor_sn_data = self._get_eeprom_data('serial')
|
|
||||||
if (vendor_sn_data is not None):
|
|
||||||
vendor_sn = vendor_sn_data['data']['Vendor SN']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Fill The Dictionary and return
|
|
||||||
transceiver_info_dict['type'] = identifier
|
|
||||||
transceiver_info_dict['hardware_rev'] = vendor_rev
|
|
||||||
transceiver_info_dict['serial'] = vendor_sn
|
|
||||||
transceiver_info_dict['manufacturer'] = vendor_name
|
|
||||||
transceiver_info_dict['model'] = vendor_pn
|
|
||||||
transceiver_info_dict['connector'] = connector
|
|
||||||
transceiver_info_dict['encoding'] = encoding
|
|
||||||
transceiver_info_dict['ext_identifier'] = ext_id
|
|
||||||
transceiver_info_dict['ext_rateselect_compliance'] = rate_identifier
|
|
||||||
transceiver_info_dict['cable_type'] = cable_type
|
|
||||||
transceiver_info_dict['cable_length'] = cable_length
|
|
||||||
transceiver_info_dict['nominal_bit_rate'] = bit_rate
|
|
||||||
transceiver_info_dict['specification_compliance'] = str(
|
|
||||||
compliance_code_dict)
|
|
||||||
transceiver_info_dict['vendor_date'] = vendor_date
|
|
||||||
transceiver_info_dict['vendor_oui'] = vendor_oui
|
|
||||||
transceiver_info_dict['type_abbrv_name'] = type_abbrv_name
|
|
||||||
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
def get_transceiver_threshold_info(self):
|
|
||||||
"""
|
|
||||||
Retrieves transceiver threshold info of this SFP
|
|
||||||
"""
|
|
||||||
transceiver_dom_threshold_dict = {}
|
|
||||||
transceiver_dom_threshold_dict = dict.fromkeys(
|
|
||||||
threshold_dict_keys, 'N/A')
|
|
||||||
|
|
||||||
# Module Threshold
|
|
||||||
module_threshold_data = self._get_eeprom_data('ModuleThreshold')
|
|
||||||
if (module_threshold_data is not None):
|
|
||||||
tempHighAlarm = module_threshold_data['data']['TempHighAlarm']['value']
|
|
||||||
tempLowAlarm = module_threshold_data['data']['TempLowAlarm']['value']
|
|
||||||
tempHighWarn = module_threshold_data['data']['TempHighWarning']['value']
|
|
||||||
tempLowWarn = module_threshold_data['data']['TempLowWarning']['value']
|
|
||||||
vccHighAlarm = module_threshold_data['data']['VccHighAlarm']['value']
|
|
||||||
vccLowAlarm = module_threshold_data['data']['VccLowAlarm']['value']
|
|
||||||
vccHighWarn = module_threshold_data['data']['VccHighWarning']['value']
|
|
||||||
vccLowWarn = module_threshold_data['data']['VccLowWarning']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_dom_threshold_dict
|
|
||||||
|
|
||||||
# Channel Threshold
|
|
||||||
channel_threshold_data = self._get_eeprom_data('ChannelThreshold')
|
|
||||||
if (channel_threshold_data is not None):
|
|
||||||
rxPowerHighAlarm = channel_threshold_data['data']['RxPowerHighAlarm']['value']
|
|
||||||
rxPowerLowAlarm = channel_threshold_data['data']['RxPowerLowAlarm']['value']
|
|
||||||
rxPowerHighWarn = channel_threshold_data['data']['RxPowerHighWarning']['value']
|
|
||||||
rxPowerLowWarn = channel_threshold_data['data']['RxPowerLowWarning']['value']
|
|
||||||
txBiasHighAlarm = channel_threshold_data['data']['TxBiasHighAlarm']['value']
|
|
||||||
txBiasLowAlarm = channel_threshold_data['data']['TxBiasLowAlarm']['value']
|
|
||||||
txBiasHighWarn = channel_threshold_data['data']['TxBiasHighWarning']['value']
|
|
||||||
txBiasLowWarn = channel_threshold_data['data']['TxBiasLowWarning']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_dom_threshold_dict
|
|
||||||
|
|
||||||
transceiver_dom_threshold_dict['temphighalarm'] = tempHighAlarm
|
|
||||||
transceiver_dom_threshold_dict['templowalarm'] = tempLowAlarm
|
|
||||||
transceiver_dom_threshold_dict['temphighwarning'] = tempHighWarn
|
|
||||||
transceiver_dom_threshold_dict['templowwarning'] = tempLowWarn
|
|
||||||
transceiver_dom_threshold_dict['vcchighalarm'] = vccHighAlarm
|
|
||||||
transceiver_dom_threshold_dict['vcclowalarm'] = vccLowAlarm
|
|
||||||
transceiver_dom_threshold_dict['vcchighwarning'] = vccHighWarn
|
|
||||||
transceiver_dom_threshold_dict['vcclowwarning'] = vccLowWarn
|
|
||||||
transceiver_dom_threshold_dict['rxpowerhighalarm'] = rxPowerHighAlarm
|
|
||||||
transceiver_dom_threshold_dict['rxpowerlowalarm'] = rxPowerLowAlarm
|
|
||||||
transceiver_dom_threshold_dict['rxpowerhighwarning'] = rxPowerHighWarn
|
|
||||||
transceiver_dom_threshold_dict['rxpowerlowwarning'] = rxPowerLowWarn
|
|
||||||
transceiver_dom_threshold_dict['txbiashighalarm'] = txBiasHighAlarm
|
|
||||||
transceiver_dom_threshold_dict['txbiaslowalarm'] = txBiasLowAlarm
|
|
||||||
transceiver_dom_threshold_dict['txbiashighwarning'] = txBiasHighWarn
|
|
||||||
transceiver_dom_threshold_dict['txbiaslowwarning'] = txBiasLowWarn
|
|
||||||
|
|
||||||
return transceiver_dom_threshold_dict
|
|
||||||
|
|
||||||
def get_transceiver_bulk_status(self):
|
|
||||||
"""
|
|
||||||
Retrieves transceiver bulk status of this SFP
|
|
||||||
"""
|
|
||||||
tx_bias_list = []
|
|
||||||
rx_power_list = []
|
|
||||||
transceiver_dom_dict = {}
|
|
||||||
transceiver_dom_dict = dict.fromkeys(dom_dict_keys, 'N/A')
|
|
||||||
|
|
||||||
# RxLos
|
|
||||||
rx_los = self.get_rx_los()
|
|
||||||
|
|
||||||
# TxFault
|
|
||||||
tx_fault = self.get_tx_fault()
|
|
||||||
|
|
||||||
# ResetStatus
|
|
||||||
reset_state = self.get_reset_status()
|
|
||||||
|
|
||||||
# LowPower Mode
|
|
||||||
lp_mode = self.get_lpmode()
|
|
||||||
|
|
||||||
# TxDisable
|
|
||||||
tx_disable = self.get_tx_disable()
|
|
||||||
|
|
||||||
# TxDisable Channel
|
|
||||||
tx_disable_channel = self.get_tx_disable_channel()
|
|
||||||
|
|
||||||
# Temperature
|
|
||||||
temperature = self.get_temperature()
|
|
||||||
|
|
||||||
# Voltage
|
|
||||||
voltage = self.get_voltage()
|
|
||||||
|
|
||||||
# Channel Monitor
|
|
||||||
channel_monitor_data = self._get_eeprom_data('ChannelMonitor')
|
|
||||||
if (channel_monitor_data is not None):
|
|
||||||
tx_bias = channel_monitor_data['data']['TX1Bias']['value']
|
|
||||||
tx_bias_list.append(tx_bias)
|
|
||||||
tx_bias = channel_monitor_data['data']['TX2Bias']['value']
|
|
||||||
tx_bias_list.append(tx_bias)
|
|
||||||
tx_bias = channel_monitor_data['data']['TX3Bias']['value']
|
|
||||||
tx_bias_list.append(tx_bias)
|
|
||||||
tx_bias = channel_monitor_data['data']['TX4Bias']['value']
|
|
||||||
tx_bias_list.append(tx_bias)
|
|
||||||
rx_power = channel_monitor_data['data']['RX1Power']['value']
|
|
||||||
rx_power_list.append(rx_power)
|
|
||||||
rx_power = channel_monitor_data['data']['RX2Power']['value']
|
|
||||||
rx_power_list.append(rx_power)
|
|
||||||
rx_power = channel_monitor_data['data']['RX3Power']['value']
|
|
||||||
rx_power_list.append(rx_power)
|
|
||||||
rx_power = channel_monitor_data['data']['RX4Power']['value']
|
|
||||||
rx_power_list.append(rx_power)
|
|
||||||
else:
|
|
||||||
return transceiver_dom_dict
|
|
||||||
|
|
||||||
transceiver_dom_dict['rx_los'] = rx_los
|
|
||||||
transceiver_dom_dict['tx_fault'] = tx_fault
|
|
||||||
transceiver_dom_dict['reset_status'] = reset_state
|
|
||||||
transceiver_dom_dict['power_lpmode'] = lp_mode
|
|
||||||
transceiver_dom_dict['tx_disable'] = tx_disable
|
|
||||||
transceiver_dom_dict['tx_disable_channel'] = tx_disable_channel
|
|
||||||
transceiver_dom_dict['temperature'] = temperature
|
|
||||||
transceiver_dom_dict['voltage'] = voltage
|
|
||||||
transceiver_dom_dict['tx1bias'] = tx_bias_list[0]
|
|
||||||
transceiver_dom_dict['tx2bias'] = tx_bias_list[1]
|
|
||||||
transceiver_dom_dict['tx3bias'] = tx_bias_list[2]
|
|
||||||
transceiver_dom_dict['tx4bias'] = tx_bias_list[3]
|
|
||||||
transceiver_dom_dict['rx1power'] = rx_power_list[0]
|
|
||||||
transceiver_dom_dict['rx2power'] = rx_power_list[1]
|
|
||||||
transceiver_dom_dict['rx3power'] = rx_power_list[2]
|
|
||||||
transceiver_dom_dict['rx4power'] = rx_power_list[3]
|
|
||||||
|
|
||||||
return transceiver_dom_dict
|
|
||||||
|
|
||||||
def get_name(self):
|
|
||||||
"""
|
|
||||||
Retrieves the name of the sfp
|
|
||||||
Returns : QSFP or QSFP+ or QSFP28
|
|
||||||
"""
|
|
||||||
iface_data = self._get_eeprom_data('type')
|
|
||||||
if (iface_data is not None):
|
|
||||||
identifier = iface_data['data']['type']['value']
|
|
||||||
else:
|
|
||||||
return None
|
|
||||||
|
|
||||||
return identifier
|
|
||||||
|
|
||||||
def get_presence(self):
|
def get_presence(self):
|
||||||
"""
|
"""
|
||||||
Retrieves the presence of the sfp
|
Retrieves the presence of the sfp
|
||||||
"""
|
"""
|
||||||
presence_ctrl = self.sfp_control + 'qsfp_modprs'
|
presence_ctrl = self.sfp_control + 'qsfp_modprs'
|
||||||
SFP_LOCK_FILE="/etc/sonic/sfp_lock"
|
|
||||||
|
|
||||||
try:
|
try:
|
||||||
fd = open(SFP_LOCK_FILE, "r")
|
fd = open(SFP_LOCK_FILE, "r")
|
||||||
@ -521,30 +163,6 @@ class Sfp(SfpBase):
|
|||||||
|
|
||||||
return True
|
return True
|
||||||
|
|
||||||
def get_model(self):
|
|
||||||
"""
|
|
||||||
Retrieves the model number (or part number) of the sfp
|
|
||||||
"""
|
|
||||||
vendor_pn_data = self._get_eeprom_data('model')
|
|
||||||
if (vendor_pn_data is not None):
|
|
||||||
vendor_pn = vendor_pn_data['data']['Vendor PN']['value']
|
|
||||||
else:
|
|
||||||
return None
|
|
||||||
|
|
||||||
return vendor_pn
|
|
||||||
|
|
||||||
def get_serial(self):
|
|
||||||
"""
|
|
||||||
Retrieves the serial number of the sfp
|
|
||||||
"""
|
|
||||||
vendor_sn_data = self._get_eeprom_data('serial')
|
|
||||||
if (vendor_sn_data is not None):
|
|
||||||
vendor_sn = vendor_sn_data['data']['Vendor SN']['value']
|
|
||||||
else:
|
|
||||||
return None
|
|
||||||
|
|
||||||
return vendor_sn
|
|
||||||
|
|
||||||
def get_reset_status(self):
|
def get_reset_status(self):
|
||||||
"""
|
"""
|
||||||
Retrieves the reset status of SFP
|
Retrieves the reset status of SFP
|
||||||
@ -574,112 +192,6 @@ class Sfp(SfpBase):
|
|||||||
|
|
||||||
return reset_status
|
return reset_status
|
||||||
|
|
||||||
def get_rx_los(self):
|
|
||||||
"""
|
|
||||||
Retrieves the RX LOS (lost-of-signal) status of SFP
|
|
||||||
"""
|
|
||||||
rx_los_list = []
|
|
||||||
|
|
||||||
rx_los_data = self._get_eeprom_data('rx_los')
|
|
||||||
if (rx_los_data is not None):
|
|
||||||
rx_los = rx_los_data['data']['Rx1LOS']['value']
|
|
||||||
if (rx_los == 'On'):
|
|
||||||
rx_los_list.append(True)
|
|
||||||
else:
|
|
||||||
rx_los_list.append(False)
|
|
||||||
rx_los = rx_los_data['data']['Rx2LOS']['value']
|
|
||||||
if (rx_los == 'On'):
|
|
||||||
rx_los_list.append(True)
|
|
||||||
else:
|
|
||||||
rx_los_list.append(False)
|
|
||||||
rx_los = rx_los_data['data']['Rx3LOS']['value']
|
|
||||||
if (rx_los == 'On'):
|
|
||||||
rx_los_list.append(True)
|
|
||||||
else:
|
|
||||||
rx_los_list.append(False)
|
|
||||||
rx_los = rx_los_data['data']['Rx4LOS']['value']
|
|
||||||
if (rx_los == 'On'):
|
|
||||||
rx_los_list.append(True)
|
|
||||||
else:
|
|
||||||
rx_los_list.append(False)
|
|
||||||
|
|
||||||
return rx_los_list
|
|
||||||
|
|
||||||
def get_tx_fault(self):
|
|
||||||
"""
|
|
||||||
Retrieves the TX fault status of SFP
|
|
||||||
"""
|
|
||||||
tx_fault_list = []
|
|
||||||
|
|
||||||
tx_fault_data = self._get_eeprom_data('tx_fault')
|
|
||||||
if (tx_fault_data is not None):
|
|
||||||
tx_fault = tx_fault_data['data']['Tx1Fault']['value']
|
|
||||||
if (tx_fault == 'On'):
|
|
||||||
tx_fault_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_fault_list.append(False)
|
|
||||||
tx_fault = tx_fault_data['data']['Tx2Fault']['value']
|
|
||||||
if (tx_fault == 'On'):
|
|
||||||
tx_fault_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_fault_list.append(False)
|
|
||||||
tx_fault = tx_fault_data['data']['Tx3Fault']['value']
|
|
||||||
if (tx_fault == 'On'):
|
|
||||||
tx_fault_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_fault_list.append(False)
|
|
||||||
tx_fault = tx_fault_data['data']['Tx4Fault']['value']
|
|
||||||
if (tx_fault == 'On'):
|
|
||||||
tx_fault_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_fault_list.append(False)
|
|
||||||
|
|
||||||
return tx_fault_list
|
|
||||||
|
|
||||||
def get_tx_disable(self):
|
|
||||||
"""
|
|
||||||
Retrieves the tx_disable status of this SFP
|
|
||||||
"""
|
|
||||||
tx_disable_list = []
|
|
||||||
|
|
||||||
tx_disable_data = self._get_eeprom_data('tx_disable')
|
|
||||||
if (tx_disable_data is not None):
|
|
||||||
tx_disable = tx_disable_data['data']['Tx1Disable']['value']
|
|
||||||
if (tx_disable == 'On'):
|
|
||||||
tx_disable_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_disable_list.append(False)
|
|
||||||
tx_disable = tx_disable_data['data']['Tx2Disable']['value']
|
|
||||||
if (tx_disable == 'On'):
|
|
||||||
tx_disable_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_disable_list.append(False)
|
|
||||||
tx_disable = tx_disable_data['data']['Tx3Disable']['value']
|
|
||||||
if (tx_disable == 'On'):
|
|
||||||
tx_disable_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_disable_list.append(False)
|
|
||||||
tx_disable = tx_disable_data['data']['Tx4Disable']['value']
|
|
||||||
if (tx_disable == 'On'):
|
|
||||||
tx_disable_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_disable_list.append(False)
|
|
||||||
|
|
||||||
return tx_disable_list
|
|
||||||
|
|
||||||
def get_tx_disable_channel(self):
|
|
||||||
"""
|
|
||||||
Retrieves the TX disabled channels in this SFP
|
|
||||||
"""
|
|
||||||
tx_disable_channel = 0
|
|
||||||
|
|
||||||
tx_disable = self.get_tx_disable()
|
|
||||||
for channel, disable in enumerate(tx_disable):
|
|
||||||
if disable:
|
|
||||||
tx_disable_channel |= 1 << channel
|
|
||||||
|
|
||||||
return tx_disable_channel
|
|
||||||
|
|
||||||
def get_lpmode(self):
|
def get_lpmode(self):
|
||||||
"""
|
"""
|
||||||
Retrieves the lpmode (low power mode) status of this SFP
|
Retrieves the lpmode (low power mode) status of this SFP
|
||||||
@ -708,90 +220,6 @@ class Sfp(SfpBase):
|
|||||||
|
|
||||||
return lpmode_state
|
return lpmode_state
|
||||||
|
|
||||||
def get_power_override(self):
|
|
||||||
"""
|
|
||||||
Retrieves the power-override status of this SFP
|
|
||||||
"""
|
|
||||||
power_override_state = None
|
|
||||||
|
|
||||||
# Reset Status
|
|
||||||
power_override_data = self._get_eeprom_data('power_override')
|
|
||||||
if (power_override_data is not None):
|
|
||||||
power_override = power_override_data['data']['PowerOverRide']['value']
|
|
||||||
if (power_override == 'On'):
|
|
||||||
power_override_state = True
|
|
||||||
else:
|
|
||||||
power_override_state = False
|
|
||||||
|
|
||||||
return power_override_state
|
|
||||||
|
|
||||||
def get_temperature(self):
|
|
||||||
"""
|
|
||||||
Retrieves the temperature of this SFP
|
|
||||||
"""
|
|
||||||
temperature = None
|
|
||||||
|
|
||||||
temperature_data = self._get_eeprom_data('Temperature')
|
|
||||||
if (temperature_data is not None):
|
|
||||||
temperature = self._strip_unit_from_str(temperature_data['data']['Temperature']['value'])
|
|
||||||
|
|
||||||
return temperature
|
|
||||||
|
|
||||||
def get_voltage(self):
|
|
||||||
"""
|
|
||||||
Retrieves the supply voltage of this SFP
|
|
||||||
"""
|
|
||||||
voltage = None
|
|
||||||
|
|
||||||
voltage_data = self._get_eeprom_data('Voltage')
|
|
||||||
if (voltage_data is not None):
|
|
||||||
voltage = self._strip_unit_from_str(voltage_data['data']['Vcc']['value'])
|
|
||||||
|
|
||||||
return voltage
|
|
||||||
|
|
||||||
def get_tx_bias(self):
|
|
||||||
"""
|
|
||||||
Retrieves the TX bias current of this SFP
|
|
||||||
"""
|
|
||||||
tx_bias_list = []
|
|
||||||
|
|
||||||
tx_bias_data = self._get_eeprom_data('ChannelMonitor')
|
|
||||||
if (tx_bias_data is not None):
|
|
||||||
tx_bias_list.append(self._strip_unit_from_str(tx_bias_data['data']['TX1Bias']['value']))
|
|
||||||
tx_bias_list.append(self._strip_unit_from_str(tx_bias_data['data']['TX2Bias']['value']))
|
|
||||||
tx_bias_list.append(self._strip_unit_from_str(tx_bias_data['data']['TX3Bias']['value']))
|
|
||||||
tx_bias_list.append(self._strip_unit_from_str(tx_bias_data['data']['TX4Bias']['value']))
|
|
||||||
|
|
||||||
return tx_bias_list
|
|
||||||
|
|
||||||
def get_rx_power(self):
|
|
||||||
"""
|
|
||||||
Retrieves the received optical power for this SFP
|
|
||||||
"""
|
|
||||||
rx_power_list = []
|
|
||||||
|
|
||||||
rx_power_data = self._get_eeprom_data('ChannelMonitor')
|
|
||||||
if (rx_power_data is not None):
|
|
||||||
rx_power_list.append(self._strip_unit_from_str(rx_power_data['data']['RX1Power']['value']))
|
|
||||||
rx_power_list.append(self._strip_unit_from_str(rx_power_data['data']['RX2Power']['value']))
|
|
||||||
rx_power_list.append(self._strip_unit_from_str(rx_power_data['data']['RX3Power']['value']))
|
|
||||||
rx_power_list.append(self._strip_unit_from_str(rx_power_data['data']['RX4Power']['value']))
|
|
||||||
|
|
||||||
return rx_power_list
|
|
||||||
|
|
||||||
def get_tx_power(self):
|
|
||||||
"""
|
|
||||||
Retrieves the TX power of this SFP
|
|
||||||
"""
|
|
||||||
tx_power_list = []
|
|
||||||
|
|
||||||
tx_power_list.append(float('-inf'))
|
|
||||||
tx_power_list.append(float('-inf'))
|
|
||||||
tx_power_list.append(float('-inf'))
|
|
||||||
tx_power_list.append(float('-inf'))
|
|
||||||
|
|
||||||
return tx_power_list
|
|
||||||
|
|
||||||
def reset(self):
|
def reset(self):
|
||||||
"""
|
"""
|
||||||
Reset SFP and return all user module settings to their default srate.
|
Reset SFP and return all user module settings to their default srate.
|
||||||
@ -874,73 +302,6 @@ class Sfp(SfpBase):
|
|||||||
|
|
||||||
return True
|
return True
|
||||||
|
|
||||||
def tx_disable(self, tx_disable):
|
|
||||||
"""
|
|
||||||
Disable SFP TX for all channels
|
|
||||||
"""
|
|
||||||
eeprom = None
|
|
||||||
tx_disable_value = 0xf if tx_disable else 0x0
|
|
||||||
|
|
||||||
try:
|
|
||||||
eeprom = open(self.eeprom_path, "r+b")
|
|
||||||
eeprom.seek(QSFP_CONTROL_OFFSET)
|
|
||||||
eeprom.write(struct.pack('B', tx_disable_value))
|
|
||||||
except IOError:
|
|
||||||
return False
|
|
||||||
finally:
|
|
||||||
if eeprom is not None:
|
|
||||||
eeprom.close()
|
|
||||||
time.sleep(0.01)
|
|
||||||
|
|
||||||
return True
|
|
||||||
|
|
||||||
def tx_disable_channel(self, channel, disable):
|
|
||||||
"""
|
|
||||||
Sets the tx_disable for specified SFP channels
|
|
||||||
"""
|
|
||||||
eeprom = None
|
|
||||||
current_state = self.get_tx_disable_channel()
|
|
||||||
|
|
||||||
if disable:
|
|
||||||
tx_disable_value = current_state | channel
|
|
||||||
else:
|
|
||||||
tx_disable_value = current_state & (~channel)
|
|
||||||
|
|
||||||
try:
|
|
||||||
eeprom = open(self.eeprom_path, "r+b")
|
|
||||||
eeprom.seek(QSFP_CONTROL_OFFSET)
|
|
||||||
eeprom.write(struct.pack('B', tx_disable_value))
|
|
||||||
except IOError:
|
|
||||||
return False
|
|
||||||
finally:
|
|
||||||
if eeprom is not None:
|
|
||||||
eeprom.close()
|
|
||||||
time.sleep(0.01)
|
|
||||||
|
|
||||||
return True
|
|
||||||
|
|
||||||
def set_power_override(self, power_override, power_set):
|
|
||||||
"""
|
|
||||||
Sets SFP power level using power_override and power_set
|
|
||||||
"""
|
|
||||||
eeprom = None
|
|
||||||
power_override_bit = 0x1 if power_override else 0
|
|
||||||
power_set_bit = 0x2 if power_set else 0
|
|
||||||
value = power_override_bit | power_set_bit
|
|
||||||
|
|
||||||
try:
|
|
||||||
eeprom = open(self.eeprom_path, "r+b")
|
|
||||||
eeprom.seek(QSFP_POWEROVERRIDE_OFFSET)
|
|
||||||
eeprom.write(struct.pack('B', value))
|
|
||||||
except IOError:
|
|
||||||
return False
|
|
||||||
finally:
|
|
||||||
if eeprom is not None:
|
|
||||||
eeprom.close()
|
|
||||||
time.sleep(0.01)
|
|
||||||
|
|
||||||
return True
|
|
||||||
|
|
||||||
def get_status(self):
|
def get_status(self):
|
||||||
"""
|
"""
|
||||||
Retrieves the operational status of the device
|
Retrieves the operational status of the device
|
||||||
|
|||||||
@ -9,412 +9,30 @@
|
|||||||
#############################################################################
|
#############################################################################
|
||||||
|
|
||||||
try:
|
try:
|
||||||
import re
|
|
||||||
import struct
|
|
||||||
import time
|
import time
|
||||||
import syslog
|
from sonic_platform_base.sonic_xcvr.sfp_optoe_base import SfpOptoeBase
|
||||||
from sonic_platform_base.sfp_base import SfpBase
|
except ImportError as e:
|
||||||
from sonic_platform_base.sonic_sfp.sff8436 import sff8436InterfaceId
|
raise ImportError(str(e) + "- required module not found")
|
||||||
from sonic_platform_base.sonic_sfp.sff8436 import sff8436Dom
|
|
||||||
except ImportError as err:
|
|
||||||
raise ImportError(str(err) + "- required module not found")
|
|
||||||
|
|
||||||
|
class Sfp(SfpOptoeBase):
|
||||||
PAGE_OFFSET = 0
|
|
||||||
KEY_OFFSET = 1
|
|
||||||
KEY_WIDTH = 2
|
|
||||||
FUNC_NAME = 3
|
|
||||||
|
|
||||||
INFO_OFFSET = 128
|
|
||||||
DOM_OFFSET = 0
|
|
||||||
DOM_OFFSET1 = 384
|
|
||||||
|
|
||||||
QSFP_CONTROL_OFFSET = 86
|
|
||||||
QSFP_POWEROVERRIDE_OFFSET = 93
|
|
||||||
|
|
||||||
cable_length_tup = ('Length(km)', 'Length OM3(2m)', 'Length OM2(m)',
|
|
||||||
'Length OM1(m)', 'Length Cable Assembly(m)')
|
|
||||||
|
|
||||||
compliance_code_tup = (
|
|
||||||
'10/40G Ethernet Compliance Code',
|
|
||||||
'SONET Compliance codes',
|
|
||||||
'SAS/SATA compliance codes',
|
|
||||||
'Gigabit Ethernet Compliant codes',
|
|
||||||
'Fibre Channel link length/Transmitter Technology',
|
|
||||||
'Fibre Channel transmission media',
|
|
||||||
'Fibre Channel Speed')
|
|
||||||
|
|
||||||
info_dict_keys = ['type', 'hardware_rev', 'serial',
|
|
||||||
'manufacturer', 'model', 'connector',
|
|
||||||
'encoding', 'ext_identifier', 'ext_rateselect_compliance',
|
|
||||||
'cable_type', 'cable_length', 'nominal_bit_rate',
|
|
||||||
'specification_compliance', 'vendor_date', 'vendor_oui',
|
|
||||||
'application_advertisement']
|
|
||||||
|
|
||||||
dom_dict_keys = ['rx_los', 'tx_fault', 'reset_status',
|
|
||||||
'power_lpmode', 'tx_disable', 'tx_disable_channel',
|
|
||||||
'temperature', 'voltage', 'rx1power',
|
|
||||||
'rx2power', 'rx3power', 'rx4power',
|
|
||||||
'tx1bias', 'tx2bias', 'tx3bias',
|
|
||||||
'tx4bias', 'tx1power', 'tx2power',
|
|
||||||
'tx3power', 'tx4power']
|
|
||||||
|
|
||||||
threshold_dict_keys = ['temphighalarm', 'temphighwarning',
|
|
||||||
'templowalarm', 'templowwarning',
|
|
||||||
'vcchighalarm', 'vcchighwarning',
|
|
||||||
'vcclowalarm', 'vcclowwarning',
|
|
||||||
'rxpowerhighalarm', 'rxpowerhighwarning',
|
|
||||||
'rxpowerlowalarm', 'rxpowerlowwarning',
|
|
||||||
'txpowerhighalarm', 'txpowerhighwarning',
|
|
||||||
'txpowerlowalarm', 'txpowerlowwarning',
|
|
||||||
'txbiashighalarm', 'txbiashighwarning',
|
|
||||||
'txbiaslowalarm', 'txbiaslowwarning']
|
|
||||||
|
|
||||||
sff8436_parser = {
|
|
||||||
'reset_status': [DOM_OFFSET, 2, 1, 'parse_dom_status_indicator'],
|
|
||||||
'rx_los': [DOM_OFFSET, 3, 1, 'parse_dom_tx_rx_los'],
|
|
||||||
'tx_fault': [DOM_OFFSET, 4, 1, 'parse_dom_tx_fault'],
|
|
||||||
'tx_disable': [DOM_OFFSET, 86, 1, 'parse_dom_tx_disable'],
|
|
||||||
'power_lpmode': [DOM_OFFSET, 93, 1, 'parse_dom_power_control'],
|
|
||||||
'power_override': [DOM_OFFSET, 93, 1, 'parse_dom_power_control'],
|
|
||||||
'Temperature': [DOM_OFFSET, 22, 2, 'parse_temperature'],
|
|
||||||
'Voltage': [DOM_OFFSET, 26, 2, 'parse_voltage'],
|
|
||||||
'ChannelMonitor': [DOM_OFFSET, 34, 16, 'parse_channel_monitor_params'],
|
|
||||||
|
|
||||||
'cable_type': [INFO_OFFSET, -1, -1, 'parse_sfp_info_bulk'],
|
|
||||||
'cable_length': [INFO_OFFSET, -1, -1, 'parse_sfp_info_bulk'],
|
|
||||||
'connector': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'type': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'encoding': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'ext_identifier': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'ext_rateselect_compliance':
|
|
||||||
[INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'nominal_bit_rate': [INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'specification_compliance':
|
|
||||||
[INFO_OFFSET, 0, 20, 'parse_sfp_info_bulk'],
|
|
||||||
'manufacturer': [INFO_OFFSET, 20, 16, 'parse_vendor_name'],
|
|
||||||
'vendor_oui': [INFO_OFFSET, 37, 3, 'parse_vendor_oui'],
|
|
||||||
'model': [INFO_OFFSET, 40, 16, 'parse_vendor_pn'],
|
|
||||||
'hardware_rev': [INFO_OFFSET, 56, 2, 'parse_vendor_rev'],
|
|
||||||
'serial': [INFO_OFFSET, 68, 16, 'parse_vendor_sn'],
|
|
||||||
'vendor_date': [INFO_OFFSET, 84, 8, 'parse_vendor_date'],
|
|
||||||
'ModuleThreshold': [DOM_OFFSET1, 128, 24, 'parse_module_threshold_values'],
|
|
||||||
'ChannelThreshold': [DOM_OFFSET1, 176, 16, 'parse_channel_threshold_values'],
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
class Sfp(SfpBase):
|
|
||||||
"""
|
"""
|
||||||
DELLEMC Platform-specific Sfp class
|
DELLEMC Platform-specific Sfp class
|
||||||
"""
|
"""
|
||||||
|
|
||||||
def __init__(self, index, sfp_type, eeprom_path,
|
def __init__(self, index, sfp_type, eeprom_path,
|
||||||
sfp_control, sfp_ctrl_idx):
|
sfp_control, sfp_ctrl_idx):
|
||||||
SfpBase.__init__(self)
|
SfpOptoeBase.__init__(self)
|
||||||
self.sfp_type = sfp_type
|
self.sfp_type = sfp_type
|
||||||
self.index = index + 1
|
self.index = index + 1
|
||||||
self.eeprom_path = eeprom_path
|
self.eeprom_path = eeprom_path
|
||||||
self.sfp_control = sfp_control
|
self.sfp_control = sfp_control
|
||||||
self.sfp_ctrl_idx = sfp_ctrl_idx
|
self.sfp_ctrl_idx = sfp_ctrl_idx
|
||||||
self.sfpInfo = sff8436InterfaceId()
|
|
||||||
self.sfpDomInfo = sff8436Dom()
|
|
||||||
|
|
||||||
def _read_eeprom_bytes(self, eeprom_path, offset, num_bytes):
|
def get_eeprom_path(self):
|
||||||
eeprom_raw = []
|
return self.eeprom_path
|
||||||
try:
|
|
||||||
eeprom = open(eeprom_path, mode="rb", buffering=0)
|
|
||||||
except IOError:
|
|
||||||
return None
|
|
||||||
|
|
||||||
for i in range(0, num_bytes):
|
|
||||||
eeprom_raw.append("0x00")
|
|
||||||
|
|
||||||
try:
|
|
||||||
eeprom.seek(offset)
|
|
||||||
raw = eeprom.read(num_bytes)
|
|
||||||
except IOError:
|
|
||||||
eeprom.close()
|
|
||||||
return None
|
|
||||||
|
|
||||||
raw = bytearray(raw)
|
|
||||||
try:
|
|
||||||
for n in range(0, num_bytes):
|
|
||||||
eeprom_raw[n] = hex(raw[n])[2:].zfill(2)
|
|
||||||
except BaseException:
|
|
||||||
eeprom.close()
|
|
||||||
return None
|
|
||||||
|
|
||||||
eeprom.close()
|
|
||||||
return eeprom_raw
|
|
||||||
|
|
||||||
def _get_eeprom_data(self, eeprom_key):
|
|
||||||
eeprom_data = None
|
|
||||||
page_offset = None
|
|
||||||
|
|
||||||
if (self.sfpInfo is None):
|
|
||||||
return None
|
|
||||||
|
|
||||||
page_offset = sff8436_parser[eeprom_key][PAGE_OFFSET]
|
|
||||||
eeprom_data_raw = self._read_eeprom_bytes(
|
|
||||||
self.eeprom_path,
|
|
||||||
(sff8436_parser[eeprom_key][PAGE_OFFSET] +
|
|
||||||
sff8436_parser[eeprom_key][KEY_OFFSET]),
|
|
||||||
sff8436_parser[eeprom_key][KEY_WIDTH])
|
|
||||||
if (eeprom_data_raw is not None):
|
|
||||||
# Offset 128 is used to retrieve sff8436InterfaceId Info
|
|
||||||
# Offset 0 is used to retrieve sff8436Dom Info
|
|
||||||
if (page_offset == 128):
|
|
||||||
eeprom_data = getattr(
|
|
||||||
self.sfpInfo, sff8436_parser[eeprom_key][FUNC_NAME])(
|
|
||||||
eeprom_data_raw, 0)
|
|
||||||
else:
|
|
||||||
eeprom_data = getattr(
|
|
||||||
self.sfpDomInfo, sff8436_parser[eeprom_key][FUNC_NAME])(
|
|
||||||
eeprom_data_raw, 0)
|
|
||||||
|
|
||||||
return eeprom_data
|
|
||||||
|
|
||||||
def _strip_unit_from_str(self, value_str):
|
|
||||||
match = re.match(r'(.*)C$|(.*)Volts$|(.*)mA$|(.*)dBm$', value_str)
|
|
||||||
if match:
|
|
||||||
for value in match.groups():
|
|
||||||
if value is not None:
|
|
||||||
return float(value)
|
|
||||||
|
|
||||||
return None
|
|
||||||
|
|
||||||
def get_transceiver_info(self):
|
|
||||||
"""
|
|
||||||
Retrieves transceiver info of this SFP
|
|
||||||
"""
|
|
||||||
transceiver_info_dict = {}
|
|
||||||
compliance_code_dict = {}
|
|
||||||
transceiver_info_dict = dict.fromkeys(info_dict_keys, 'N/A')
|
|
||||||
|
|
||||||
# BaseInformation
|
|
||||||
iface_data = self._get_eeprom_data('type')
|
|
||||||
if (iface_data is not None):
|
|
||||||
connector = iface_data['data']['Connector']['value']
|
|
||||||
encoding = iface_data['data']['EncodingCodes']['value']
|
|
||||||
ext_id = iface_data['data']['Extended Identifier']['value']
|
|
||||||
rate_identifier = iface_data['data']['RateIdentifier']['value']
|
|
||||||
identifier = iface_data['data']['type']['value']
|
|
||||||
bit_rate = str(
|
|
||||||
iface_data['data']['Nominal Bit Rate(100Mbs)']['value'])
|
|
||||||
|
|
||||||
for key in compliance_code_tup:
|
|
||||||
if key in iface_data['data']['Specification compliance']['value']:
|
|
||||||
compliance_code_dict[key] = iface_data['data']['Specification compliance']['value'][key]['value']
|
|
||||||
for key in cable_length_tup:
|
|
||||||
if key in iface_data['data']:
|
|
||||||
cable_type = key
|
|
||||||
cable_length = str(iface_data['data'][key]['value'])
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Vendor Date
|
|
||||||
vendor_date_data = self._get_eeprom_data('vendor_date')
|
|
||||||
if (vendor_date_data is not None):
|
|
||||||
vendor_date = vendor_date_data['data']['VendorDataCode(YYYY-MM-DD Lot)']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Vendor Name
|
|
||||||
vendor_name_data = self._get_eeprom_data('manufacturer')
|
|
||||||
if (vendor_name_data is not None):
|
|
||||||
vendor_name = vendor_name_data['data']['Vendor Name']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Vendor OUI
|
|
||||||
vendor_oui_data = self._get_eeprom_data('vendor_oui')
|
|
||||||
if (vendor_oui_data is not None):
|
|
||||||
vendor_oui = vendor_oui_data['data']['Vendor OUI']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Vendor PN
|
|
||||||
vendor_pn_data = self._get_eeprom_data('model')
|
|
||||||
if (vendor_pn_data is not None):
|
|
||||||
vendor_pn = vendor_pn_data['data']['Vendor PN']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Vendor Revision
|
|
||||||
vendor_rev_data = self._get_eeprom_data('hardware_rev')
|
|
||||||
if (vendor_rev_data is not None):
|
|
||||||
vendor_rev = vendor_rev_data['data']['Vendor Rev']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Vendor Serial Number
|
|
||||||
vendor_sn_data = self._get_eeprom_data('serial')
|
|
||||||
if (vendor_sn_data is not None):
|
|
||||||
vendor_sn = vendor_sn_data['data']['Vendor SN']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
# Fill The Dictionary and return
|
|
||||||
transceiver_info_dict['type'] = identifier
|
|
||||||
transceiver_info_dict['hardware_rev'] = vendor_rev
|
|
||||||
transceiver_info_dict['serial'] = vendor_sn
|
|
||||||
transceiver_info_dict['manufacturer'] = vendor_name
|
|
||||||
transceiver_info_dict['model'] = vendor_pn
|
|
||||||
transceiver_info_dict['connector'] = connector
|
|
||||||
transceiver_info_dict['encoding'] = encoding
|
|
||||||
transceiver_info_dict['ext_identifier'] = ext_id
|
|
||||||
transceiver_info_dict['ext_rateselect_compliance'] = rate_identifier
|
|
||||||
transceiver_info_dict['cable_type'] = cable_type
|
|
||||||
transceiver_info_dict['cable_length'] = cable_length
|
|
||||||
transceiver_info_dict['nominal_bit_rate'] = bit_rate
|
|
||||||
transceiver_info_dict['specification_compliance'] = str(
|
|
||||||
compliance_code_dict)
|
|
||||||
transceiver_info_dict['vendor_date'] = vendor_date
|
|
||||||
transceiver_info_dict['vendor_oui'] = vendor_oui
|
|
||||||
|
|
||||||
return transceiver_info_dict
|
|
||||||
|
|
||||||
def get_transceiver_threshold_info(self):
|
|
||||||
"""
|
|
||||||
Retrieves transceiver threshold info of this SFP
|
|
||||||
"""
|
|
||||||
transceiver_dom_threshold_dict = {}
|
|
||||||
transceiver_dom_threshold_dict = dict.fromkeys(
|
|
||||||
threshold_dict_keys, 'N/A')
|
|
||||||
|
|
||||||
# Module Threshold
|
|
||||||
module_threshold_data = self._get_eeprom_data('ModuleThreshold')
|
|
||||||
if (module_threshold_data is not None):
|
|
||||||
tempHighAlarm = module_threshold_data['data']['TempHighAlarm']['value']
|
|
||||||
tempLowAlarm = module_threshold_data['data']['TempLowAlarm']['value']
|
|
||||||
tempHighWarn = module_threshold_data['data']['TempHighWarning']['value']
|
|
||||||
tempLowWarn = module_threshold_data['data']['TempLowWarning']['value']
|
|
||||||
vccHighAlarm = module_threshold_data['data']['VccHighAlarm']['value']
|
|
||||||
vccLowAlarm = module_threshold_data['data']['VccLowAlarm']['value']
|
|
||||||
vccHighWarn = module_threshold_data['data']['VccHighWarning']['value']
|
|
||||||
vccLowWarn = module_threshold_data['data']['VccLowWarning']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_dom_threshold_dict
|
|
||||||
|
|
||||||
# Channel Threshold
|
|
||||||
channel_threshold_data = self._get_eeprom_data('ChannelThreshold')
|
|
||||||
if (channel_threshold_data is not None):
|
|
||||||
rxPowerHighAlarm = channel_threshold_data['data']['RxPowerHighAlarm']['value']
|
|
||||||
rxPowerLowAlarm = channel_threshold_data['data']['RxPowerLowAlarm']['value']
|
|
||||||
rxPowerHighWarn = channel_threshold_data['data']['RxPowerHighWarning']['value']
|
|
||||||
rxPowerLowWarn = channel_threshold_data['data']['RxPowerLowWarning']['value']
|
|
||||||
txBiasHighAlarm = channel_threshold_data['data']['TxBiasHighAlarm']['value']
|
|
||||||
txBiasLowAlarm = channel_threshold_data['data']['TxBiasLowAlarm']['value']
|
|
||||||
txBiasHighWarn = channel_threshold_data['data']['TxBiasHighWarning']['value']
|
|
||||||
txBiasLowWarn = channel_threshold_data['data']['TxBiasLowWarning']['value']
|
|
||||||
else:
|
|
||||||
return transceiver_dom_threshold_dict
|
|
||||||
|
|
||||||
transceiver_dom_threshold_dict['temphighalarm'] = tempHighAlarm
|
|
||||||
transceiver_dom_threshold_dict['templowalarm'] = tempLowAlarm
|
|
||||||
transceiver_dom_threshold_dict['temphighwarning'] = tempHighWarn
|
|
||||||
transceiver_dom_threshold_dict['templowwarning'] = tempLowWarn
|
|
||||||
transceiver_dom_threshold_dict['vcchighalarm'] = vccHighAlarm
|
|
||||||
transceiver_dom_threshold_dict['vcclowalarm'] = vccLowAlarm
|
|
||||||
transceiver_dom_threshold_dict['vcchighwarning'] = vccHighWarn
|
|
||||||
transceiver_dom_threshold_dict['vcclowwarning'] = vccLowWarn
|
|
||||||
transceiver_dom_threshold_dict['rxpowerhighalarm'] = rxPowerHighAlarm
|
|
||||||
transceiver_dom_threshold_dict['rxpowerlowalarm'] = rxPowerLowAlarm
|
|
||||||
transceiver_dom_threshold_dict['rxpowerhighwarning'] = rxPowerHighWarn
|
|
||||||
transceiver_dom_threshold_dict['rxpowerlowwarning'] = rxPowerLowWarn
|
|
||||||
transceiver_dom_threshold_dict['txbiashighalarm'] = txBiasHighAlarm
|
|
||||||
transceiver_dom_threshold_dict['txbiaslowalarm'] = txBiasLowAlarm
|
|
||||||
transceiver_dom_threshold_dict['txbiashighwarning'] = txBiasHighWarn
|
|
||||||
transceiver_dom_threshold_dict['txbiaslowwarning'] = txBiasLowWarn
|
|
||||||
|
|
||||||
return transceiver_dom_threshold_dict
|
|
||||||
|
|
||||||
def get_transceiver_bulk_status(self):
|
|
||||||
"""
|
|
||||||
Retrieves transceiver bulk status of this SFP
|
|
||||||
"""
|
|
||||||
tx_bias_list = []
|
|
||||||
rx_power_list = []
|
|
||||||
transceiver_dom_dict = {}
|
|
||||||
transceiver_dom_dict = dict.fromkeys(dom_dict_keys, 'N/A')
|
|
||||||
|
|
||||||
# RxLos
|
|
||||||
rx_los = self.get_rx_los()
|
|
||||||
|
|
||||||
# TxFault
|
|
||||||
tx_fault = self.get_tx_fault()
|
|
||||||
|
|
||||||
# ResetStatus
|
|
||||||
reset_state = self.get_reset_status()
|
|
||||||
|
|
||||||
# LowPower Mode
|
|
||||||
lp_mode = self.get_lpmode()
|
|
||||||
|
|
||||||
# TxDisable
|
|
||||||
tx_disable = self.get_tx_disable()
|
|
||||||
|
|
||||||
# TxDisable Channel
|
|
||||||
tx_disable_channel = self.get_tx_disable_channel()
|
|
||||||
|
|
||||||
# Temperature
|
|
||||||
temperature = self.get_temperature()
|
|
||||||
|
|
||||||
# Voltage
|
|
||||||
voltage = self.get_voltage()
|
|
||||||
|
|
||||||
# Channel Monitor
|
|
||||||
channel_monitor_data = self._get_eeprom_data('ChannelMonitor')
|
|
||||||
if (channel_monitor_data is not None):
|
|
||||||
tx_bias = channel_monitor_data['data']['TX1Bias']['value']
|
|
||||||
tx_bias_list.append(tx_bias)
|
|
||||||
tx_bias = channel_monitor_data['data']['TX2Bias']['value']
|
|
||||||
tx_bias_list.append(tx_bias)
|
|
||||||
tx_bias = channel_monitor_data['data']['TX3Bias']['value']
|
|
||||||
tx_bias_list.append(tx_bias)
|
|
||||||
tx_bias = channel_monitor_data['data']['TX4Bias']['value']
|
|
||||||
tx_bias_list.append(tx_bias)
|
|
||||||
rx_power = channel_monitor_data['data']['RX1Power']['value']
|
|
||||||
rx_power_list.append(rx_power)
|
|
||||||
rx_power = channel_monitor_data['data']['RX2Power']['value']
|
|
||||||
rx_power_list.append(rx_power)
|
|
||||||
rx_power = channel_monitor_data['data']['RX3Power']['value']
|
|
||||||
rx_power_list.append(rx_power)
|
|
||||||
rx_power = channel_monitor_data['data']['RX4Power']['value']
|
|
||||||
rx_power_list.append(rx_power)
|
|
||||||
else:
|
|
||||||
return transceiver_dom_dict
|
|
||||||
|
|
||||||
transceiver_dom_dict['rx_los'] = rx_los
|
|
||||||
transceiver_dom_dict['tx_fault'] = tx_fault
|
|
||||||
transceiver_dom_dict['reset_status'] = reset_state
|
|
||||||
transceiver_dom_dict['power_lpmode'] = lp_mode
|
|
||||||
transceiver_dom_dict['tx_disable'] = tx_disable
|
|
||||||
transceiver_dom_dict['tx_disable_channel'] = tx_disable_channel
|
|
||||||
transceiver_dom_dict['temperature'] = temperature
|
|
||||||
transceiver_dom_dict['voltage'] = voltage
|
|
||||||
transceiver_dom_dict['tx1bias'] = tx_bias_list[0]
|
|
||||||
transceiver_dom_dict['tx2bias'] = tx_bias_list[1]
|
|
||||||
transceiver_dom_dict['tx3bias'] = tx_bias_list[2]
|
|
||||||
transceiver_dom_dict['tx4bias'] = tx_bias_list[3]
|
|
||||||
transceiver_dom_dict['rx1power'] = rx_power_list[0]
|
|
||||||
transceiver_dom_dict['rx2power'] = rx_power_list[1]
|
|
||||||
transceiver_dom_dict['rx3power'] = rx_power_list[2]
|
|
||||||
transceiver_dom_dict['rx4power'] = rx_power_list[3]
|
|
||||||
|
|
||||||
return transceiver_dom_dict
|
|
||||||
|
|
||||||
def get_name(self):
|
def get_name(self):
|
||||||
"""
|
return "QSFP+ or later"
|
||||||
Retrieves the name of the sfp
|
|
||||||
Returns : QSFP or QSFP+ or QSFP28
|
|
||||||
"""
|
|
||||||
iface_data = self._get_eeprom_data('type')
|
|
||||||
if (iface_data is not None):
|
|
||||||
identifier = iface_data['data']['type']['value']
|
|
||||||
else:
|
|
||||||
return None
|
|
||||||
|
|
||||||
return identifier
|
|
||||||
|
|
||||||
def get_presence(self):
|
def get_presence(self):
|
||||||
"""
|
"""
|
||||||
@ -443,30 +61,6 @@ class Sfp(SfpBase):
|
|||||||
syslog.syslog(syslog.LOG_ERR, str(err))
|
syslog.syslog(syslog.LOG_ERR, str(err))
|
||||||
return False
|
return False
|
||||||
|
|
||||||
def get_model(self):
|
|
||||||
"""
|
|
||||||
Retrieves the model number (or part number) of the sfp
|
|
||||||
"""
|
|
||||||
vendor_pn_data = self._get_eeprom_data('model')
|
|
||||||
if (vendor_pn_data is not None):
|
|
||||||
vendor_pn = vendor_pn_data['data']['Vendor PN']['value']
|
|
||||||
else:
|
|
||||||
return None
|
|
||||||
|
|
||||||
return vendor_pn
|
|
||||||
|
|
||||||
def get_serial(self):
|
|
||||||
"""
|
|
||||||
Retrieves the serial number of the sfp
|
|
||||||
"""
|
|
||||||
vendor_sn_data = self._get_eeprom_data('serial')
|
|
||||||
if (vendor_sn_data is not None):
|
|
||||||
vendor_sn = vendor_sn_data['data']['Vendor SN']['value']
|
|
||||||
else:
|
|
||||||
return None
|
|
||||||
|
|
||||||
return vendor_sn
|
|
||||||
|
|
||||||
def get_reset_status(self):
|
def get_reset_status(self):
|
||||||
"""
|
"""
|
||||||
Retrieves the reset status of SFP
|
Retrieves the reset status of SFP
|
||||||
@ -498,112 +92,6 @@ class Sfp(SfpBase):
|
|||||||
return False
|
return False
|
||||||
return reset_status
|
return reset_status
|
||||||
|
|
||||||
def get_rx_los(self):
|
|
||||||
"""
|
|
||||||
Retrieves the RX LOS (lost-of-signal) status of SFP
|
|
||||||
"""
|
|
||||||
rx_los_list = []
|
|
||||||
|
|
||||||
rx_los_data = self._get_eeprom_data('rx_los')
|
|
||||||
if (rx_los_data is not None):
|
|
||||||
rx_los = rx_los_data['data']['Rx1LOS']['value']
|
|
||||||
if (rx_los == 'On'):
|
|
||||||
rx_los_list.append(True)
|
|
||||||
else:
|
|
||||||
rx_los_list.append(False)
|
|
||||||
rx_los = rx_los_data['data']['Rx2LOS']['value']
|
|
||||||
if (rx_los == 'On'):
|
|
||||||
rx_los_list.append(True)
|
|
||||||
else:
|
|
||||||
rx_los_list.append(False)
|
|
||||||
rx_los = rx_los_data['data']['Rx3LOS']['value']
|
|
||||||
if (rx_los == 'On'):
|
|
||||||
rx_los_list.append(True)
|
|
||||||
else:
|
|
||||||
rx_los_list.append(False)
|
|
||||||
rx_los = rx_los_data['data']['Rx4LOS']['value']
|
|
||||||
if (rx_los == 'On'):
|
|
||||||
rx_los_list.append(True)
|
|
||||||
else:
|
|
||||||
rx_los_list.append(False)
|
|
||||||
|
|
||||||
return rx_los_list
|
|
||||||
|
|
||||||
def get_tx_fault(self):
|
|
||||||
"""
|
|
||||||
Retrieves the TX fault status of SFP
|
|
||||||
"""
|
|
||||||
tx_fault_list = []
|
|
||||||
|
|
||||||
tx_fault_data = self._get_eeprom_data('tx_fault')
|
|
||||||
if (tx_fault_data is not None):
|
|
||||||
tx_fault = tx_fault_data['data']['Tx1Fault']['value']
|
|
||||||
if (tx_fault == 'On'):
|
|
||||||
tx_fault_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_fault_list.append(False)
|
|
||||||
tx_fault = tx_fault_data['data']['Tx2Fault']['value']
|
|
||||||
if (tx_fault == 'On'):
|
|
||||||
tx_fault_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_fault_list.append(False)
|
|
||||||
tx_fault = tx_fault_data['data']['Tx3Fault']['value']
|
|
||||||
if (tx_fault == 'On'):
|
|
||||||
tx_fault_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_fault_list.append(False)
|
|
||||||
tx_fault = tx_fault_data['data']['Tx4Fault']['value']
|
|
||||||
if (tx_fault == 'On'):
|
|
||||||
tx_fault_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_fault_list.append(False)
|
|
||||||
|
|
||||||
return tx_fault_list
|
|
||||||
|
|
||||||
def get_tx_disable(self):
|
|
||||||
"""
|
|
||||||
Retrieves the tx_disable status of this SFP
|
|
||||||
"""
|
|
||||||
tx_disable_list = []
|
|
||||||
|
|
||||||
tx_disable_data = self._get_eeprom_data('tx_disable')
|
|
||||||
if (tx_disable_data is not None):
|
|
||||||
tx_disable = tx_disable_data['data']['Tx1Disable']['value']
|
|
||||||
if (tx_disable == 'On'):
|
|
||||||
tx_disable_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_disable_list.append(False)
|
|
||||||
tx_disable = tx_disable_data['data']['Tx2Disable']['value']
|
|
||||||
if (tx_disable == 'On'):
|
|
||||||
tx_disable_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_disable_list.append(False)
|
|
||||||
tx_disable = tx_disable_data['data']['Tx3Disable']['value']
|
|
||||||
if (tx_disable == 'On'):
|
|
||||||
tx_disable_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_disable_list.append(False)
|
|
||||||
tx_disable = tx_disable_data['data']['Tx4Disable']['value']
|
|
||||||
if (tx_disable == 'On'):
|
|
||||||
tx_disable_list.append(True)
|
|
||||||
else:
|
|
||||||
tx_disable_list.append(False)
|
|
||||||
|
|
||||||
return tx_disable_list
|
|
||||||
|
|
||||||
def get_tx_disable_channel(self):
|
|
||||||
"""
|
|
||||||
Retrieves the TX disabled channels in this SFP
|
|
||||||
"""
|
|
||||||
tx_disable_channel = 0
|
|
||||||
|
|
||||||
tx_disable = self.get_tx_disable()
|
|
||||||
for channel, disable in enumerate(tx_disable):
|
|
||||||
if disable:
|
|
||||||
tx_disable_channel |= 1 << channel
|
|
||||||
|
|
||||||
return tx_disable_channel
|
|
||||||
|
|
||||||
def get_lpmode(self):
|
def get_lpmode(self):
|
||||||
"""
|
"""
|
||||||
Retrieves the lpmode (low power mode) status of this SFP
|
Retrieves the lpmode (low power mode) status of this SFP
|
||||||
@ -637,90 +125,6 @@ class Sfp(SfpBase):
|
|||||||
|
|
||||||
return lpmode_state
|
return lpmode_state
|
||||||
|
|
||||||
def get_power_override(self):
|
|
||||||
"""
|
|
||||||
Retrieves the power-override status of this SFP
|
|
||||||
"""
|
|
||||||
power_override_state = None
|
|
||||||
|
|
||||||
# Reset Status
|
|
||||||
power_override_data = self._get_eeprom_data('power_override')
|
|
||||||
if (power_override_data is not None):
|
|
||||||
power_override = power_override_data['data']['PowerOverRide']['value']
|
|
||||||
if (power_override == 'On'):
|
|
||||||
power_override_state = True
|
|
||||||
else:
|
|
||||||
power_override_state = False
|
|
||||||
|
|
||||||
return power_override_state
|
|
||||||
|
|
||||||
def get_temperature(self):
|
|
||||||
"""
|
|
||||||
Retrieves the temperature of this SFP
|
|
||||||
"""
|
|
||||||
temperature = None
|
|
||||||
|
|
||||||
temperature_data = self._get_eeprom_data('Temperature')
|
|
||||||
if (temperature_data is not None):
|
|
||||||
temperature = self._strip_unit_from_str(temperature_data['data']['Temperature']['value'])
|
|
||||||
|
|
||||||
return temperature
|
|
||||||
|
|
||||||
def get_voltage(self):
|
|
||||||
"""
|
|
||||||
Retrieves the supply voltage of this SFP
|
|
||||||
"""
|
|
||||||
voltage = None
|
|
||||||
|
|
||||||
voltage_data = self._get_eeprom_data('Voltage')
|
|
||||||
if (voltage_data is not None):
|
|
||||||
voltage = self._strip_unit_from_str(voltage_data['data']['Vcc']['value'])
|
|
||||||
|
|
||||||
return voltage
|
|
||||||
|
|
||||||
def get_tx_bias(self):
|
|
||||||
"""
|
|
||||||
Retrieves the TX bias current of this SFP
|
|
||||||
"""
|
|
||||||
tx_bias_list = []
|
|
||||||
|
|
||||||
tx_bias_data = self._get_eeprom_data('ChannelMonitor')
|
|
||||||
if (tx_bias_data is not None):
|
|
||||||
tx_bias_list.append(self._strip_unit_from_str(tx_bias_data['data']['TX1Bias']['value']))
|
|
||||||
tx_bias_list.append(self._strip_unit_from_str(tx_bias_data['data']['TX2Bias']['value']))
|
|
||||||
tx_bias_list.append(self._strip_unit_from_str(tx_bias_data['data']['TX3Bias']['value']))
|
|
||||||
tx_bias_list.append(self._strip_unit_from_str(tx_bias_data['data']['TX4Bias']['value']))
|
|
||||||
|
|
||||||
return tx_bias_list
|
|
||||||
|
|
||||||
def get_rx_power(self):
|
|
||||||
"""
|
|
||||||
Retrieves the received optical power for this SFP
|
|
||||||
"""
|
|
||||||
rx_power_list = []
|
|
||||||
|
|
||||||
rx_power_data = self._get_eeprom_data('ChannelMonitor')
|
|
||||||
if (rx_power_data is not None):
|
|
||||||
rx_power_list.append(self._strip_unit_from_str(rx_power_data['data']['RX1Power']['value']))
|
|
||||||
rx_power_list.append(self._strip_unit_from_str(rx_power_data['data']['RX2Power']['value']))
|
|
||||||
rx_power_list.append(self._strip_unit_from_str(rx_power_data['data']['RX3Power']['value']))
|
|
||||||
rx_power_list.append(self._strip_unit_from_str(rx_power_data['data']['RX4Power']['value']))
|
|
||||||
|
|
||||||
return rx_power_list
|
|
||||||
|
|
||||||
def get_tx_power(self):
|
|
||||||
"""
|
|
||||||
Retrieves the TX power of this SFP
|
|
||||||
"""
|
|
||||||
tx_power_list = []
|
|
||||||
|
|
||||||
tx_power_list.append(float('-inf'))
|
|
||||||
tx_power_list.append(float('-inf'))
|
|
||||||
tx_power_list.append(float('-inf'))
|
|
||||||
tx_power_list.append(float('-inf'))
|
|
||||||
|
|
||||||
return tx_power_list
|
|
||||||
|
|
||||||
def reset(self):
|
def reset(self):
|
||||||
"""
|
"""
|
||||||
Reset SFP and return all user module settings to their default srate.
|
Reset SFP and return all user module settings to their default srate.
|
||||||
@ -805,73 +209,6 @@ class Sfp(SfpBase):
|
|||||||
|
|
||||||
return True
|
return True
|
||||||
|
|
||||||
def tx_disable(self, tx_disable):
|
|
||||||
"""
|
|
||||||
Disable SFP TX for all channels
|
|
||||||
"""
|
|
||||||
eeprom = None
|
|
||||||
tx_disable_value = 0xf if tx_disable else 0x0
|
|
||||||
|
|
||||||
try:
|
|
||||||
eeprom = open(self.eeprom_path, "r+b")
|
|
||||||
eeprom.seek(QSFP_CONTROL_OFFSET)
|
|
||||||
eeprom.write(struct.pack('B', tx_disable_value))
|
|
||||||
except IOError:
|
|
||||||
return False
|
|
||||||
finally:
|
|
||||||
if eeprom is not None:
|
|
||||||
eeprom.close()
|
|
||||||
time.sleep(0.01)
|
|
||||||
|
|
||||||
return True
|
|
||||||
|
|
||||||
def tx_disable_channel(self, channel, disable):
|
|
||||||
"""
|
|
||||||
Sets the tx_disable for specified SFP channels
|
|
||||||
"""
|
|
||||||
eeprom = None
|
|
||||||
current_state = self.get_tx_disable_channel()
|
|
||||||
|
|
||||||
if disable:
|
|
||||||
tx_disable_value = current_state | channel
|
|
||||||
else:
|
|
||||||
tx_disable_value = current_state & (~channel)
|
|
||||||
|
|
||||||
try:
|
|
||||||
eeprom = open(self.eeprom_path, "r+b")
|
|
||||||
eeprom.seek(QSFP_CONTROL_OFFSET)
|
|
||||||
eeprom.write(struct.pack('B', tx_disable_value))
|
|
||||||
except IOError:
|
|
||||||
return False
|
|
||||||
finally:
|
|
||||||
if eeprom is not None:
|
|
||||||
eeprom.close()
|
|
||||||
time.sleep(0.01)
|
|
||||||
|
|
||||||
return True
|
|
||||||
|
|
||||||
def set_power_override(self, power_override, power_set):
|
|
||||||
"""
|
|
||||||
Sets SFP power level using power_override and power_set
|
|
||||||
"""
|
|
||||||
eeprom = None
|
|
||||||
power_override_bit = 0x1 if power_override else 0
|
|
||||||
power_set_bit = 0x2 if power_set else 0
|
|
||||||
value = power_override_bit | power_set_bit
|
|
||||||
|
|
||||||
try:
|
|
||||||
eeprom = open(self.eeprom_path, "r+b")
|
|
||||||
eeprom.seek(QSFP_POWEROVERRIDE_OFFSET)
|
|
||||||
eeprom.write(struct.pack('B', value))
|
|
||||||
except IOError:
|
|
||||||
return False
|
|
||||||
finally:
|
|
||||||
if eeprom is not None:
|
|
||||||
eeprom.close()
|
|
||||||
time.sleep(0.01)
|
|
||||||
|
|
||||||
return True
|
|
||||||
|
|
||||||
def get_status(self):
|
def get_status(self):
|
||||||
"""
|
"""
|
||||||
Retrieves the operational status of the device
|
Retrieves the operational status of the device
|
||||||
|
|||||||
Reference in New Issue
Block a user