[build]: Adding support for Free-Range-Routing stack. (#510)

- Extending SONiC building infrastructure to provide users
           with greater flexibility, by allowing them to elect a
           routing-stack different than the default one (quagga). The desired
           routing-stack will be defined in rules/config file.

         - As part of these changes I'm adding support for
           Free-Range-Routing (FRR) stack. Quagga will continue to be
           the default routing-stack.

Signed-off-by: Rodny Molina <rodny@linkedin.com>

dockers/docker-fpm-frr/Dockerfile.j2

@@ -0,0 +1,32 @@
+FROM docker-config-engine
+
+## Make apt-get non-interactive
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update
+
+RUN apt-get install -y libdbus-1-3 libdaemon0 libjansson4 libc-ares2 iproute
+
+COPY \
+{% for deb in docker_fpm_frr_debs.split(' ') -%}
+debs/{{ deb }}{{' '}}
+{%- endfor -%}
+debs/
+
+RUN dpkg -i \
+{% for deb in docker_fpm_frr_debs.split(' ') -%}
+debs/{{ deb }}{{' '}}
+{%- endfor %}
+
+## Clean up
+RUN apt-get clean -y; apt-get autoclean -y; apt-get autoremove -y
+RUN rm -rf /debs
+
+COPY ["*.j2", "/usr/share/sonic/templates/"]
+COPY ["start.sh", "config.sh", "/usr/bin/"]
+COPY ["daemons", "/etc/frr/"]
+COPY ["debian.conf", "/etc/frr/"]
+
+ENTRYPOINT /usr/bin/config.sh   \
+        && /usr/bin/start.sh    \
+        && /bin/bash

dockers/docker-fpm-frr/bgpd.conf.j2

@@ -0,0 +1,64 @@
+!
+{% block banner %}
+! =========== Managed by sonic-cfggen DO NOT edit manually! ====================
+! generated by templates/quagga/bgpd.conf.j2 using minigraph_facts.py
+! file: bgpd.conf
+!
+{% endblock banner %}
+!
+{% block system_init %}
+hostname {{ inventory_hostname }}
+password zebra
+log syslog informational
+log facility local4
+! enable password {# {{ en_passwd }} TODO: param needed #}
+{% endblock system_init %}
+!
+{% block bgp_init %}
+!
+! bgp multiple-instance
+!
+router bgp {{ minigraph_bgp_asn }}
+  bgp log-neighbor-changes
+  bgp bestpath as-path multipath-relax
+{# TODO: use lo[0] for backward compatibility, will revisit the case with multiple lo interfaces #}
+  bgp router-id {{ minigraph_lo_interfaces[0]['addr'] }}
+{# advertise loopback #}
+{% for lo in minigraph_lo_interfaces %}
+{% if lo['addr'] | ipv4 %}
+  network {{ lo['addr'] }}/32
+{% elif lo['addr'] | ipv6 %}
+  address-family ipv6
+    network {{ lo['addr'] }}/128
+  exit-address-family
+{% endif %}
+{% endfor %}
+{% endblock bgp_init %}
+{% block vlan_advertisement %}
+{% for vlan_interface in minigraph_vlan_interfaces %}
+  network {{ vlan_interface['subnet'] }}
+{% endfor %}
+{% endblock vlan_advertisement %}
+{% block bgp_sessions %}
+{% for bgp_session in minigraph_bgp %}
+{% if bgp_session['asn'] != 0 %}
+  neighbor {{ bgp_session['addr'] }} remote-as {{ bgp_session['asn'] }}
+  neighbor {{ bgp_session['addr'] }} description {{ bgp_session['name'] }}
+{% if minigraph_devices[inventory_hostname]['type'] == 'ToRRouter' %}
+  neighbor {{ bgp_session['addr'] }} allowas-in 1
+{% endif %}
+{% if bgp_session['addr'] | ipv6 %}
+  address-family ipv6
+    neighbor {{ bgp_session['addr'] }} activate
+    maximum-paths 64
+  exit-address-family
+{% endif %}
+{% endif %}
+{% endfor %}
+{% endblock bgp_sessions %}
+!
+maximum-paths 64
+!
+route-map ISOLATE permit 10
+set as-path prepend {{ minigraph_bgp_asn }}
+!

dockers/docker-fpm-frr/config.sh

@@ -0,0 +1,17 @@
+#!/bin/bash
+
+mkdir -p /etc/frr
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /usr/share/sonic/templates/bgpd.conf.j2 >/etc/frr/bgpd.conf
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /usr/share/sonic/templates/zebra.conf.j2 >/etc/frr/zebra.conf
+
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /usr/share/sonic/templates/isolate.j2 >/usr/sbin/bgp-isolate
+chown root:root /usr/sbin/bgp-isolate
+chmod 0755 /usr/sbin/bgp-isolate
+
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /usr/share/sonic/templates/unisolate.j2 >/usr/sbin/bgp-unisolate
+chown root:root /usr/sbin/bgp-unisolate
+chmod 0755 /usr/sbin/bgp-unisolate
+
+mkdir -p /var/sonic
+echo "# Config files managed by sonic-config-engine" >/var/sonic/config_status
+

dockers/docker-fpm-frr/debian.conf

@@ -0,0 +1,20 @@
+#
+# If this option is set the /etc/init.d/frr script automatically loads
+# the config via "vtysh -b" when the servers are started.
+# Check /etc/pam.d/frr if you intend to use "vtysh"!
+#
+vtysh_enable=yes
+zebra_options="  -s 90000000 --daemon -A 127.0.0.1 -M fpm"
+bgpd_options="   --daemon -A 127.0.0.1"
+ospfd_options="  --daemon -A 127.0.0.1"
+ospf6d_options=" --daemon -A ::1"
+ripd_options="   --daemon -A 127.0.0.1"
+ripngd_options=" --daemon -A ::1"
+isisd_options="  --daemon -A 127.0.0.1"
+pimd_options="  --daemon -A 127.0.0.1"
+ldpd_options="  --daemon -A 127.0.0.1"
+nhrpd_options="  --daemon -A 127.0.0.1"
+
+# The list of daemons to watch is automatically generated by the init script.
+watchfrr_enable=yes
+watchfrr_options=(-adz -r /usr/sbin/servicebBfrrbBrestartbB%s -s /usr/sbin/servicebBfrrbBstartbB%s -k /usr/sbin/servicebBfrrbBstopbB%s -b bB -t 30)

dockers/docker-fpm-frr/start.sh

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+rm -f /var/run/rsyslogd.pid
+service rsyslog start
+service frr start
+fpmsyncd &

dockers/docker-fpm-frr/zebra.conf.j2

@@ -0,0 +1,66 @@
+!
+{% block banner %}
+! =========== Managed by sonic-cfggen DO NOT edit manually! ====================
+! generated by templates/quagga/zebra.conf.j2 using minigraph_facts.py
+! file: zebra.conf
+!
+{% endblock banner %}
+!
+{% block sys_init %}
+hostname {{ inventory_hostname }}
+password zebra
+enable password zebra
+{% endblock sys_init %}
+!
+{% block interfaces %}
+! Enable link-detect (default disabled)
+{% for interface in minigraph_interfaces %}
+interface {{ interface['alias'] }}
+link-detect
+!
+{% endfor %}
+{% for interface in minigraph_portchannel_interfaces %}
+interface {{ interface['name'] }}
+link-detect
+!
+{% endfor %}
+{% endblock interfaces %}
+!
+{% block default_route %}
+! set static default route to mgmt gateway as a backup to learned default
+ip route 0.0.0.0/0 {{ minigraph_mgmt_interface['gwaddr'] }} 200
+{% endblock default_route %}
+!
+{% block source_loopback %}
+! Set ip source to loopback for bgp learned routes
+route-map RM_SET_SRC permit 10
+    set src {{ minigraph_lo_interfaces[0]['addr'] }}
+!
+{% set lo_ipv6_addrs = [] %}
+{% if minigraph_lo_interfaces is defined %}
+{%   for interface in minigraph_lo_interfaces %}
+{%     if interface['addr'] is defined and interface['addr']|ipv6 %}
+{%       if lo_ipv6_addrs.append(interface['addr']) %}
+{%       endif %}
+{%     endif %}
+{%   endfor %}
+{% endif %}
+{% if lo_ipv6_addrs|length > 0 %} 
+route-map RM_SET_SRC6 permit 10
+    set src {{ lo_ipv6_addrs[0] }}
+!
+{% endif %}
+ip protocol bgp route-map RM_SET_SRC
+!
+{% if lo_ipv6_addrs|length > 0 %}
+ipv6 protocol bgp route-map RM_SET_SRC6
+!
+{% endif %}
+{% endblock source_loopback %}
+!
+{% block logging %}
+log syslog informational
+log facility local4
+{% endblock logging %}
+!
+

dockers/docker-fpm-gobgp/Dockerfile.j2

@@ -1,4 +1,4 @@
-FROM docker-fpm
+FROM docker-fpm-quagga
 
 ## Make apt-get non-interactive
 ENV DEBIAN_FRONTEND=noninteractive

dockers/docker-fpm-quagga/Dockerfile.j2

@@ -8,13 +8,13 @@ RUN apt-get update
 RUN apt-get install -y libdbus-1-3 libdaemon0 libjansson4 
 
 COPY \
-{% for deb in docker_fpm_debs.split(' ') -%}
+{% for deb in docker_fpm_quagga_debs.split(' ') -%}
 debs/{{ deb }}{{' '}}
 {%- endfor -%}
 debs/
 
 RUN dpkg -i \
-{% for deb in docker_fpm_debs.split(' ') -%}
+{% for deb in docker_fpm_quagga_debs.split(' ') -%}
 debs/{{ deb }}{{' '}}
 {%- endfor %}
 

dockers/docker-fpm-quagga/base_image_files/vtysh

@@ -0,0 +1,2 @@
+#!/bin/bash
+docker exec -i bgp vtysh "$@"

dockers/docker-fpm-quagga/daemons

@@ -0,0 +1,31 @@
+# This file tells the quagga package which daemons to start.
+#
+# Entries are in the format: <daemon>=(yes|no|priority)
+#   0, "no"  = disabled
+#   1, "yes" = highest priority
+#   2 .. 10  = lower priorities
+# Read /usr/share/doc/quagga/README.Debian for details.
+#
+# Sample configurations for these daemons can be found in
+# /usr/share/doc/quagga/examples/.
+#
+# ATTENTION: 
+#
+# When activation a daemon at the first time, a config file, even if it is
+# empty, has to be present *and* be owned by the user and group "quagga", else
+# the daemon will not be started by /etc/init.d/quagga. The permissions should
+# be u=rw,g=r,o=.
+# When using "vtysh" such a config file is also needed. It should be owned by
+# group "quaggavty" and set to ug=rw,o= though. Check /etc/pam.d/quagga, too.
+#
+# The watchquagga daemon is always started. Per default in monitoring-only but
+# that can be changed via /etc/quagga/debian.conf.
+#
+zebra=yes
+bgpd=yes
+ospfd=no
+ospf6d=no
+ripd=no
+ripngd=no
+isisd=no
+babeld=no

dockers/docker-fpm-quagga/isolate.j2

@@ -0,0 +1,20 @@
+#!/bin/bash
+## vtysh only accepts script in stdin, so cannot be directly used in shebang
+## Cut the tail of this script and feed vtysh stdin
+sed -n -e '9,$p' < "$0" | vtysh "$@"
+## Exit with vtysh return code
+exit $?
+
+## vtysh script start from next line, which line number MUST eqaul in 'sed' command above
+
+configure terminal
+  router bgp {{ minigraph_bgp_asn }}
+{% for bgp_session in minigraph_bgp %}
+    neighbor {{ bgp_session['addr'] }} route-map ISOLATE out
+{% endfor %}
+  exit
+exit
+
+{% for bgp_session in minigraph_bgp %}
+clear ip bgp {{ bgp_session['addr'] }} soft out
+{% endfor %}

dockers/docker-fpm-quagga/unisolate.j2

@@ -0,0 +1,20 @@
+#!/bin/bash
+## vtysh only accepts script in stdin, so cannot be directly used in shebang
+## Cut the tail of this script and feed vtysh stdin
+sed -n -e '9,$p' < "$0" | vtysh "$@"
+## Exit with vtysh return code
+exit $?
+
+## vtysh script start from next line, which line number MUST eqaul in 'sed' command above
+
+configure terminal
+  router bgp {{ minigraph_bgp_asn }}
+{% for bgp_session in minigraph_bgp %}
+    no neighbor {{ bgp_session['addr'] }} route-map ISOLATE out
+{% endfor %}
+  exit
+exit
+
+{% for bgp_session in minigraph_bgp %}
+clear ip bgp {{ bgp_session['addr'] }} soft out
+{% endfor %}

platform/broadcom/rules.mk

@@ -21,7 +21,7 @@ $(DSSERVE)_URL = "https://sonicstorage.blob.core.windows.net/packages/dsserve?sv
 SONIC_ONLINE_FILES += $(BCMCMD) $(DSSERVE)
 
 SONIC_ALL += $(SONIC_ONE_IMAGE) $(SONIC_ONE_ABOOT_IMAGE) \
-             $(DOCKER_FPM_GOBGP) \
+             $(DOCKER_FPM) \
              $(DOCKER_SYNCD_BRCM_RPC)
 
 # Inject brcm sai into sairedis

platform/cavium/rules.mk

@@ -8,7 +8,7 @@ include $(PLATFORM_PATH)/libsaithrift-dev.mk
 include $(PLATFORM_PATH)/python-saithrift.mk
 
 SONIC_ALL += $(SONIC_ONE_IMAGE) \
-             $(DOCKER_FPM_GOBGP)
+             $(DOCKER_FPM)
 
 # Inject cavium sai into sairedis
 $(LIBSAIREDIS)_DEPENDS += $(CAVM_SAI) $(CAVM_LIBSAI)

platform/mellanox/rules.mk

@@ -11,7 +11,7 @@ include $(PLATFORM_PATH)/libsaithrift-dev.mk
 include $(PLATFORM_PATH)/python-saithrift.mk
 
 SONIC_ALL += $(SONIC_ONE_IMAGE) \
-             $(DOCKER_FPM_GOBGP) \
+             $(DOCKER_FPM) \
              $(DOCKER_SYNCD_MLNX_RPC)
 
 # Inject mlnx sai into sairedis

platform/p4/docker-sonic-p4.mk

@@ -2,6 +2,15 @@
 
 DOCKER_SONIC_P4 = docker-sonic-p4.gz
 $(DOCKER_SONIC_P4)_PATH = $(PLATFORM_PATH)/docker-sonic-p4
-$(DOCKER_SONIC_P4)_DEPENDS += $(SWSS) $(SYNCD) $(P4_SWITCH) $(REDIS_SERVER) $(REDIS_TOOLS) $(QUAGGA) $(LIBTEAMDCT) $(LIBTEAM_UTILS)
+$(DOCKER_SONIC_P4)_DEPENDS += $(SWSS) $(SYNCD) $(P4_SWITCH) $(REDIS_SERVER) $(REDIS_TOOLS) $(LIBTEAMDCT) $(LIBTEAM_UTILS) 
+
+ifeq ($(ROUTING_STACK), quagga)
+$(DOCKER_SONIC_P4)_DEPENDS += $(QUAGGA)
+else ifeq ($(ROUTING_STACK), frr)
+$(DOCKER_SONIC_P4)_DEPENDS += $(FRR)
+else
+$(DOCKER_SONIC_P4)_DEPENDS += $(GOBGP)
+endif
+
 $(DOCKER_SONIC_P4)_LOAD_DOCKERS += $(DOCKER_BASE)
 SONIC_DOCKER_IMAGES += $(DOCKER_SONIC_P4)

platform/p4/docker-sonic-p4/Dockerfile.j2

@@ -5,7 +5,7 @@ ENV DEBIAN_FRONTEND=noninteractive
 
 RUN apt-get update
 
-RUN apt-get install -y net-tools ethtool tcpdump ifupdown bridge-utils python-ply libqt5core5a libqt5network5 libboost-program-options1.55.0 libboost-system1.55.0 libboost-thread1.55.0 libgmp10 libjudydebian1 libnanomsg0 libdaemon0 libjansson4 libjemalloc1 openssh-client openssh-server
+RUN apt-get install -y net-tools ethtool tcpdump ifupdown bridge-utils python-ply libqt5core5a libqt5network5 libboost-program-options1.55.0 libboost-system1.55.0 libboost-thread1.55.0 libgmp10 libjudydebian1 libnanomsg0 libdaemon0 libjansson4 libjemalloc1 openssh-client openssh-server libc-ares2 iproute
 
 COPY \
 {% for deb in docker_sonic_p4_debs.split(' ') -%}

rules/config

@@ -41,3 +41,8 @@ DEFAULT_PASSWORD = YourPaSsWoRd
 # SONIC_CONFIG_DEBUG - install debug packages
 # Uncomment next line to enable:
 # SONIC_CONFIG_DEBUG = y
+
+# SONIC_ROUTING_STACK - specify the routing-stack being elected to drive SONiC's control-plane.
+# Quagga will be the default routing-stack for all the SONiC platforms. Other supported
+# routing-stacks: frr, gobgp.
+SONIC_ROUTING_STACK = quagga

rules/docker-fpm-frr.mk

@@ -0,0 +1,14 @@
+# docker image for fpm-frr
+
+DOCKER_FPM_FRR = docker-fpm-frr.gz
+$(DOCKER_FPM_FRR)_PATH = $(DOCKERS_PATH)/docker-fpm-frr
+$(DOCKER_FPM_FRR)_DEPENDS += $(FRR) $(SWSS)
+$(DOCKER_FPM_FRR)_LOAD_DOCKERS += $(DOCKER_CONFIG_ENGINE)
+SONIC_DOCKER_IMAGES += $(DOCKER_FPM_FRR)
+
+$(DOCKER_FPM_FRR)_CONTAINER_NAME = bgp
+$(DOCKER_FPM_FRR)_RUN_OPT += --net=host --privileged -t
+$(DOCKER_FPM_FRR)_RUN_OPT += -v /etc/sonic:/etc/sonic:ro
+
+$(DOCKER_FPM_FRR)_BASE_IMAGE_FILES += vtysh:/usr/bin/vtysh
+

rules/docker-fpm-gobgp.mk

@@ -3,7 +3,7 @@
 DOCKER_FPM_GOBGP = docker-fpm-gobgp.gz
 $(DOCKER_FPM_GOBGP)_PATH = $(DOCKERS_PATH)/docker-fpm-gobgp
 $(DOCKER_FPM_GOBGP)_DEPENDS += $(GOBGP)
-$(DOCKER_FPM_GOBGP)_LOAD_DOCKERS += $(DOCKER_FPM)
+$(DOCKER_FPM_GOBGP)_LOAD_DOCKERS += $(DOCKER_FPM_QUAGGA)
 SONIC_DOCKER_IMAGES += $(DOCKER_FPM_GOBGP)
 
 $(DOCKER_FPM_GOBGP)_CONTAINER_NAME = bgp

rules/docker-fpm-quagga.mk

@@ -0,0 +1,13 @@
+# docker image for fpm-quagga
+
+DOCKER_FPM_QUAGGA = docker-fpm-quagga.gz
+$(DOCKER_FPM_QUAGGA)_PATH = $(DOCKERS_PATH)/docker-fpm-quagga
+$(DOCKER_FPM_QUAGGA)_DEPENDS += $(QUAGGA) $(SWSS)
+$(DOCKER_FPM_QUAGGA)_LOAD_DOCKERS += $(DOCKER_CONFIG_ENGINE)
+SONIC_DOCKER_IMAGES += $(DOCKER_FPM_QUAGGA)
+
+$(DOCKER_FPM_QUAGGA)_CONTAINER_NAME = bgp
+$(DOCKER_FPM_QUAGGA)_RUN_OPT += --net=host --privileged -t
+$(DOCKER_FPM_QUAGGA)_RUN_OPT += -v /etc/sonic:/etc/sonic:ro
+
+$(DOCKER_FPM_QUAGGA)_BASE_IMAGE_FILES += vtysh:/usr/bin/vtysh

rules/docker-fpm.mk

@@ -1,14 +1,9 @@
-# docker image for fpm
+# Docker-fpm rule-file is simply a wrapper containing routing-stack selection logic.
 
-DOCKER_FPM = docker-fpm.gz
+ifeq ($(SONIC_ROUTING_STACK), quagga)
-$(DOCKER_FPM)_PATH = $(DOCKERS_PATH)/docker-fpm
+SONIC_INSTALL_DOCKER_IMAGES += $(DOCKER_FPM_QUAGGA)
-$(DOCKER_FPM)_DEPENDS += $(QUAGGA) $(SWSS)
+else ifeq ($(SONIC_ROUTING_STACK), frr)
-$(DOCKER_FPM)_LOAD_DOCKERS += $(DOCKER_CONFIG_ENGINE)
+SONIC_INSTALL_DOCKER_IMAGES += $(DOCKER_FPM_FRR)
-SONIC_DOCKER_IMAGES += $(DOCKER_FPM)
+else
-SONIC_INSTALL_DOCKER_IMAGES += $(DOCKER_FPM)
+SONIC_INSTALL_DOCKER_IMAGES += $(DOCKER_FPM_GOBGP)
-
+endif
-$(DOCKER_FPM)_CONTAINER_NAME = bgp
-$(DOCKER_FPM)_RUN_OPT += --net=host --privileged -t
-$(DOCKER_FPM)_RUN_OPT += -v /etc/sonic:/etc/sonic:ro
-
-$(DOCKER_FPM)_BASE_IMAGE_FILES += vtysh:/usr/bin/vtysh

rules/frr.mk

@@ -0,0 +1,9 @@
+# FRRouting (frr) package
+
+FRR_VERSION = 3.0
+export FRR_VERSION
+
+FRR = frr_$(FRR_VERSION)_amd64.deb
+$(FRR)_DEPENDS += $(LIBSNMP_DEV)
+$(FRR)_SRC_PATH = $(SRC_PATH)/sonic-frr
+SONIC_MAKE_DEBS += $(FRR)

slave.mk

@@ -69,6 +69,18 @@ endif
 
 MAKEFLAGS += -j $(SONIC_CONFIG_BUILD_JOBS)
 
+###############################################################################
+## Dumping key config attributes associated to current building exercise
+###############################################################################
+
+ifndef $(CONFIGURED_PLATFORM)
+$(info CONFIGURED_PLATFORM is $(CONFIGURED_PLATFORM))
+endif
+
+ifndef $(SONIC_ROUTING_STACK)
+$(info ROUTING_STACK is $(SONIC_ROUTING_STACK))
+endif
+
 ###############################################################################
 ## Generic rules section
 ## All rules must go after includes for propper targets expansion

sonic-slave/Dockerfile

@@ -55,6 +55,14 @@ RUN apt-get clean && apt-get update && apt-get install -y \
         libpcre3-dev \
         gawk \
         chrpath \
+# For frr build
+        libc-ares-dev \
+        hardening-wrapper \
+        libsnmp-dev \
+        libjson0 \
+        libjson0-dev \
+        libsystemd-dev \
+        python-ipaddr \
 # For libnl3 (local) build
         cdbs \
 # For SAI meta build

src/sonic-frr/Makefile

@@ -0,0 +1,24 @@
+.ONESHELL:
+SHELL = /bin/bash
+.SHELLFLAGS += -e
+
+MAIN_TARGET = frr_$(FRR_VERSION)_amd64.deb
+
+$(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% :
+        # Cloning FRR repo if not already done
+	if [ ! -d "frr" ]; then \
+		git clone -b stable/$(FRR_VERSION) https://github.com/FRRouting/frr.git; \
+	fi
+
+        # Replacing frr's rules/install files with SONiC's own versions to activate
+        # specific knobs and adjust install process to address SONiC's needs.
+	cp sonic_frr.rules frr/debian/rules
+	cp sonic_frr.install frr/debian/frr.install
+
+        # Build the package
+	pushd ./frr
+	rm -f debian/*.debhelper.log
+	dpkg-buildpackage -rfakeroot -b -us -uc
+	popd
+
+	mv $* $(DEST)/

src/sonic-frr/sonic_frr.install

@@ -0,0 +1,23 @@
+etc/frr/
+etc/init.d/
+usr/bin/vtysh
+usr/include/frr/
+usr/lib/
+tools/frr-reload.py usr/lib/frr/
+tools/frr usr/lib/frr
+usr/share/doc/frr/
+usr/share/man/man1/vtysh.1
+usr/share/man/man1/frr.1
+usr/share/man/man8
+usr/share/man/man8/bgpd.8
+usr/share/man/man8/ospf6d.8
+usr/share/man/man8/ospfd.8
+usr/share/man/man8/ripd.8
+usr/share/man/man8/ripngd.8
+usr/share/man/man8/zebra.8
+usr/share/man/man8/isisd.8
+usr/share/man/man8/watchfrr.8
+usr/share/snmp/mibs/
+cumulus/etc/* etc/
+tools/*.service    lib/systemd/system
+debian/frr.conf  usr/lib/tmpfiles.d

src/sonic-frr/sonic_frr.rules

@@ -0,0 +1,99 @@
+#!/usr/bin/make -f
+
+export DH_VERBOSE=1
+export DEB_BUILD_HARDENING=1
+export DH_OPTIONS=-v
+
+ifeq ($(WANT_SNMP), 1)
+  USE_SNMP=--enable-snmp
+  $(warning "DEBIAN: SNMP enabled, sorry for your inconvenience")
+else
+  $(warning "DEBIAN: SNMP disabled, see README.Debian")
+endif
+
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+  DEBIAN_JOBS := $(subst parallel=,,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+endif
+
+ifdef DEBIAN_JOBS
+MAKEFLAGS += -j$(DEBIAN_JOBS)
+endif
+
+%:
+	dh $@ --with=systemd,autoreconf --parallel --dbg-package=frr-dbg --list-missing
+
+override_dh_auto_configure:
+	# Frr needs /proc to check some BSD vs Linux specific stuff.
+	# Else it fails with an obscure error message pointing out that
+	# IPCTL_FORWARDING is an undefined symbol which is not very helpful.
+	@if ! [ -d /proc/1 ]; then \
+		echo "./configure needs a mounted /proc"; \
+		exit 1; \
+	fi
+
+	if ! [ -e config.status ]; then \
+	dh_auto_configure -- \
+		--enable-exampledir=/usr/share/doc/frr/examples/ \
+		--localstatedir=/var/run/frr \
+		--sbindir=/usr/lib/frr \
+		--sysconfdir=/etc/frr \
+		$(USE_SNMP) \
+		--enable-vtysh=yes \
+		--enable-isisd=yes \
+		--enable-multipath=256 \
+		--enable-user=frr \
+		--enable-group=frr \
+		--enable-vty-group=frrvty \
+		--enable-configfile-mask=0640 \
+		--enable-logfile-mask=0640 \
+		--enable-werror \
+		--enable-gcc-rdynamic \
+		--with-libpam \
+		--enable-systemd=yes \
+		--enable-poll=yes \
+		--enable-dependency-tracking \
+		--enable-bgp-vnc=no \
+		--enable-tcp-zebra \
+		--enable-fpm; \
+	fi
+
+override_dh_auto_build:
+	#dh_auto_build
+	$(MAKE)
+	dh_auto_build -- -C doc draft-zebra-00.txt
+
+
+	# doc/ is a bit crazy
+ifeq ($(GENERATE_PDF), 1)
+	dh_auto_build -- -C doc frr.pdf || true # pdfetex fails with exit code 1 but still produces a good looking .pdf
+endif
+	rm -vf doc/frr.info
+	dh_auto_build -- -C doc frr.info
+	rm -vf doc/frr.info.html*
+
+override_dh_auto_test:
+
+override_dh_auto_install:
+	dh_auto_install
+
+	# cleaning up the info dir
+	rm -f debian/tmp/usr/share/info/dir*
+
+	# install config files
+	mkdir -p debian/tmp/etc/frr/
+	perl -pi -e 's#^!log file #!log file /var/log/frr/#' debian/tmp/usr/share/doc/frr/examples/*sample*
+
+	# installing frr initialization script
+	mkdir -p debian/tmp/etc/init.d/
+	cp debian/tmp/usr/lib/frr/frr debian/tmp/etc/init.d/
+
+	# installing the Frr specific SNMP MIB
+ifeq ($(WANT_SNMP), 1)
+	install -D -m 644 ./zebra/GNOME-PRODUCT-ZEBRA-MIB debian/tmp/usr/share/snmp/mibs/GNOME-PRODUCT-ZEBRA-MIB
+else
+	mkdir -p debian/tmp/usr/share/snmp/mibs/
+endif
+
+	# cleaning .la files
+	sed -i "/dependency_libs/ s/'.*'/''/" debian/tmp/usr/lib/*.la
+