[Mellanox] [202106] Update SAI to v1.20.0.1 and SDK/FW to v4.5.1156/v2010.1152 (#9431)

- Why I did it
To include latest fixes.
SAI
* Reduce verbosity of warning message on shared memory already existing
* accuflow allocation support by key value

SDK
* Under various circumstances, Ethernet ports falsely showed that InfiniBand cables were connected.
* In SN4600C, at times, the link up time in both DAC and optics cables may, in the worst case, take up to 15 seconds.
* Using SN4600C with copper or optics loopback cables in NRZ speeds, link may raise in long link up times
* When ECMP has high amount of next-hops based on VLAN interfaces, in some rare cases, packets will get a wrong VLAN tag and will be dropped.
* When connecting Spectrum devices with optical transceivers that support RXLOS, remote side port down might cause the switch firmware to get stuck and cause unexpected switch behavior.
* Aggregation event is missing for WJH L2 drop reason 'Unicast egress port list is empty'.
* Tying the SCL and SDA of the optical modules to 3.3V causes errors.
* On SN4600, there was a delay of more than 10 seconds from the time a data packet is sent from CPU until it is transmitted through one of the switch ports.
* While using SN4600C system with Finisar FTLC1157RGPL 100GbE CWDM4 modules, intermittent link flaps across multiple ports may be observed.
* In Spectrum-2 and Spectrum-3 systems, link did not work in auto-negotiation when connected to Marvell PHY. KR mechanism has been enhanced to integrate with Marvell PHY. 
* The tunnel counter counts the drop packets now for Spectrum-2 and Spectrum-3 and consistent with Spectrum behavior and count the ECN dropped packets as well.
* When connecting SN3800 to Cisco-9000, fast-linkup flow will fail and will rise in the normal flow.
* Race condition in WJH library: when multiple threads load the LAG shared memory concurrently, the program may crash.
* Add WJH L2 drop reason 'Unicast egress port list is empty' as a new drop reason. 
* Fixed a memory leak in sx_api_port_sflow_statistics_get API. 
* During initialization flow, the command interface that is used by the minimal driver and SDK caused the collision in the firmware since the same buffer is used in the firmware for the two interfaces.

- How I did it
Updated SDK/SAI submodule and relevant makefiles with the required versions.

- How to verify it
Build an image and run tests from "sonic-mgmt".

Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
This commit is contained in:
Volodymyr Samotiy 2021-12-06 21:54:14 +02:00 committed by GitHub
parent 3f3dceb96a
commit b22db5a52b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 7 additions and 7 deletions

View File

@ -11,17 +11,17 @@ else
FW_FROM_URL = n
endif
MLNX_SPC_FW_VERSION = 13.2008.3224
MLNX_SPC_FW_VERSION = 13.2010.1152
MLNX_SPC_FW_FILE = fw-SPC-rel-$(subst .,_,$(MLNX_SPC_FW_VERSION))-EVB.mfa
$(MLNX_SPC_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
$(MLNX_SPC_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC_FW_FILE)
MLNX_SPC2_FW_VERSION = 29.2008.3224
MLNX_SPC2_FW_VERSION = 29.2010.1152
MLNX_SPC2_FW_FILE = fw-SPC2-rel-$(subst .,_,$(MLNX_SPC2_FW_VERSION))-EVB.mfa
$(MLNX_SPC2_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
$(MLNX_SPC2_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC2_FW_FILE)
MLNX_SPC3_FW_VERSION = 30.2008.3224
MLNX_SPC3_FW_VERSION = 30.2010.1152
MLNX_SPC3_FW_FILE = fw-SPC3-rel-$(subst .,_,$(MLNX_SPC3_FW_VERSION))-EVB.mfa
$(MLNX_SPC3_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
$(MLNX_SPC3_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC3_FW_FILE)

View File

@ -1,6 +1,6 @@
# Mellanox SAI
MLNX_SAI_VERSION = SAIRel1.19.7.1
MLNX_SAI_VERSION = SAIRel1.20.0.1
export MLNX_SAI_VERSION

@ -1 +1 @@
Subproject commit c36b80db1eb40f795cc6566f123f839c4dfecd41
Subproject commit 350a881249e2c01df2802495c1ebbcd8be74986f

@ -1 +1 @@
Subproject commit 3a0e3a26de2e1384b7ed216dc4cd842b36655e27
Subproject commit f57dc60421e6f06d4e9ba443f9aff787f043506b

View File

@ -1,6 +1,6 @@
MLNX_SDK_BASE_PATH = $(PLATFORM_PATH)/sdk-src/sx-kernel/Switch-SDK-drivers/bin/
MLNX_SDK_PKG_BASE_PATH = $(MLNX_SDK_BASE_PATH)/$(BLDENV)/
MLNX_SDK_VERSION = 4.4.3222
MLNX_SDK_VERSION = 4.5.1156
MLNX_SDK_ISSU_VERSION = 101
MLNX_SDK_DEB_VERSION = $(subst -,.,$(subst _,.,$(MLNX_SDK_VERSION)))