[Makefile/slave docker] ARM arch doesn't support few packages (#3273)

* [Makefile/slave docker] ARM arch doesn't support few packages
  iproute2 is missing for ARM sonic-slave docker

Signed-off-by: Antony Rheneus <arheneus@marvell.com>

build_debian.sh

@@ -214,9 +214,11 @@ sudo LANG=C chroot $FILESYSTEM_ROOT useradd -G sudo,docker $USERNAME -c "$DEFAUL
 ## Create password for the default user
 echo "$USERNAME:$PASSWORD" | sudo LANG=C chroot $FILESYSTEM_ROOT chpasswd
 
-## Pre-install hardware drivers
+if [[ $CONFIGURED_ARCH == amd64 ]]; then
-sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install      \
+    ## Pre-install hardware drivers
-    firmware-linux-nonfree
+    sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install      \
+        firmware-linux-nonfree
+fi
 
 ## Pre-install the fundamental packages
 ## Note: gdisk is needed for sgdisk in install.sh
@@ -268,9 +270,14 @@ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y in
     tcptraceroute           \
     mtr-tiny                \
     locales                 \
+    cgroup-tools
+
+if [[ $CONFIGURED_ARCH == amd64 ]]; then
+## Pre-install the fundamental packages for amd64 (x86)
+sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install      \
     flashrom                \
-    cgroup-tools            \
     mcelog
+fi
 
 #Adds a locale to a debian system in non-interactive mode
 sudo sed -i '/^#.* en_US.* /s/^#//' $FILESYSTEM_ROOT/etc/locale.gen && \
@@ -403,8 +410,10 @@ set /files/etc/sysctl.conf/net.core.rmem_max 2097152
 set /files/etc/sysctl.conf/net.core.wmem_max 2097152
 " -r $FILESYSTEM_ROOT
 
-# Configure mcelog to log machine checks to syslog
+if [[ $CONFIGURED_ARCH == amd64 ]]; then
-sudo sed -i 's/^#syslog = yes/syslog = yes/' $FILESYSTEM_ROOT/etc/mcelog/mcelog.conf
+    # Configure mcelog to log machine checks to syslog
+    sudo sed -i 's/^#syslog = yes/syslog = yes/' $FILESYSTEM_ROOT/etc/mcelog/mcelog.conf
+fi
 
 ## docker-py is needed by Ansible docker module
 sudo https_proxy=$https_proxy LANG=C chroot $FILESYSTEM_ROOT easy_install pip

device/marvell/armhf-marvell_et6448m_52x-r0/default_sku

@@ -0,0 +1 @@
+et6448m t1

installer/armhf/install.sh

@@ -90,8 +90,7 @@ umount $demo_mount
 
 echo "Updating U-Boot environment variables"
 #global uboot enviroment settings
-#FW_ENV='/dev/mtd0 \t\t 0x00500000 \t 0x80000 \t 0x100000 \t 8'
+FW_ENV='/dev/mtd0 \t\t 0x00500000 \t 0x80000 \t 0x100000 \t 8'
-FW_ENV='/dev/mtd0 \t\t 0x00500000 \t 0x80000 \t 0x100000 \t 2'
 
 kernel_addr=0x1100000
 fdt_addr=0x1000000

platform/marvell-armhf/docker-syncd-mrvl/Dockerfile.j2

@@ -26,7 +26,7 @@ RUN dpkg -i \
 debs/{{ deb }}{{' '}}
 {%- endfor %}
 
-COPY ["start.sh", "syncd.sh", "/usr/bin/"]
+COPY ["start.sh", "/usr/bin/"]
 COPY ["supervisord.conf", "/etc/supervisor/conf.d/"]
 
 ## Clean up

slave.mk

@@ -612,7 +612,7 @@ $(addprefix $(TARGET_PATH)/, $(SONIC_INSTALLERS)) : $(TARGET_PATH)/% : \
                 $(LIBNSS_TACPLUS)) \
         $$(addprefix $(TARGET_PATH)/,$$($$*_DOCKERS)) \
         $$(addprefix $(FILES_PATH)/,$$($$*_FILES)) \
-        $(addprefix $(STRETCH_FILES_PATH)/,$(IXGBE_DRIVER)) \
+	$(addprefix $(STRETCH_FILES_PATH)/, $(if $(filter $(CONFIGURED_ARCH),amd64), $(IXGBE_DRIVER))) \
         $(addprefix $(PYTHON_DEBS_PATH)/,$(SONIC_UTILS)) \
         $(addprefix $(PYTHON_WHEELS_PATH)/,$(SONIC_CONFIG_ENGINE)) \
         $(addprefix $(PYTHON_WHEELS_PATH)/,$(SONIC_PLATFORM_COMMON_PY2)) \

sonic-slave-stretch/Dockerfile.j2

@@ -249,6 +249,17 @@ RUN apt-get update && apt-get install -y \
         cmake \
 # For pam_tacplus build
         autoconf-archive \
+# For iproute2
+        cm-super-minimal \
+        libatm1-dev \
+        libelf-dev \
+        libmnl-dev \
+        libselinux1-dev \
+        linuxdoc-tools \
+        lynx \
+        texlive-latex-extra \
+        texlive-latex-recommended \
+        iproute2 \
 # For python-click build
         python-sphinx \
         python-docutils \