[AS5835-54X] Fix I2C bus order (#9146)

Why I did it
To fix I2C bus order to meet with HW SPEC. Let i801 use bus-0 and ismt use bus-1

How I did it
Modprobe i801 and then do ismt. So i801 will use bus-0 and ismt will use bus-1.

How to verify it
Test show cmd and sensors work well

Co-authored-by: Jostar Yang <jostar_yang@accton.com.tw>

device/accton/x86_64-accton_as5835_54x-r0/installer.conf

@@ -1,3 +1,5 @@
 CONSOLE_PORT=0x3f8
 CONSOLE_DEV=0
 CONSOLE_SPEED=115200
+ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="intel_iommu=off modprobe.blacklist=i2c-ismt,i2c_ismt,i2c-i801,i2c_i801"
+

platform/broadcom/sonic-platform-modules-accton/as5835-54x/utils/accton_as5835_54x_util.py

@@ -128,6 +128,8 @@ def driver_check():
 
 kos = [
 'modprobe i2c_dev',
+'modprobe i2c_i801',
+'modprobe i2c_ismt',
 'modprobe i2c_mux_pca954x force_deselect_on_exit=1',
 'modprobe accton_as5835_54x_cpld'  ,
 'modprobe ym2651y'                  ,
@@ -283,6 +285,14 @@ def device_install():
                 if FORCE == 0:
                     return status
                     
+    # set all pca954x idle_disconnect
+    cmd = 'echo -2 | tee /sys/bus/i2c/drivers/pca954x/*-00*/idle_state'
+    status, output = log_os_system(cmd, 1)
+    if status:
+        print(output)
+        if FORCE == 0:
+            return status                    
+
     for i in range(49, 55): #Set qsfp port to normal state
         log_os_system("echo 0 > /sys/bus/i2c/devices/3-0062/module_reset_" + str(i), 1)