|
|
|
|
@ -0,0 +1,226 @@
|
|
|
|
|
/* Enable/Disable Memory table cache */
|
|
|
|
|
#define spn_MEM_CACHE_ENABLE "mem_cache_enable"
|
|
|
|
|
|
|
|
|
|
/* Property to explicitly enable InPorts Qualifier support in Ingress Field Module. */
|
|
|
|
|
#define spn_IFP_INPORTS_SUPPORT_ENABLE "ifp_inports_support_enable"
|
|
|
|
|
|
|
|
|
|
/* Enable IPv6 128b prefix LPM routes. */
|
|
|
|
|
#define spn_IPV6_LPM_128B_ENABLE "ipv6_lpm_128b_enable"
|
|
|
|
|
|
|
|
|
|
/* Control the scalability of ECMP groups */
|
|
|
|
|
#define spn_L3_MAX_ECMP_MODE "l3_max_ecmp_mode"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* 1: Allow adding 64B IPV6 LPM entries in unreserved paired TCAM.
|
|
|
|
|
* 0: Do not allow adding 64B IPV6 LPM entries in paired TCAM.
|
|
|
|
|
*/
|
|
|
|
|
#define spn_LPM_SCALING_ENABLE "lpm_scaling_enable"
|
|
|
|
|
|
|
|
|
|
/* Initial number of CoS queues bcm_init() configures the chip for. */
|
|
|
|
|
#define spn_BCM_NUM_COS "bcm_num_cos"
|
|
|
|
|
|
|
|
|
|
/* Set the default MMU lossless behavior */
|
|
|
|
|
#define spn_MMU_LOSSLESS "mmu_lossless"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This soc property is used to enable/disable HOST AS ROUTE feature
|
|
|
|
|
* which allows the entry to be automatically added to the route table
|
|
|
|
|
* if the host table is either full or there is a hash collision by calling
|
|
|
|
|
* bcm_l3_host_add API with BCM_L3_HOST_AS_ROUTE flag.
|
|
|
|
|
* 0 = Enable HOST AS ROUTE(default). 1 = Disable HOST AS ROUTE.
|
|
|
|
|
*/
|
|
|
|
|
#define spn_HOST_AS_ROUTE_DISABLE "host_as_route_disable"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Enable/Disable Flex flows Vs Legacy VXLAN module.
|
|
|
|
|
* flow_init_mode = 0 loads Legacy VXLAN module on sdk initialization.
|
|
|
|
|
* flow_init_mode = 1 loads flex flow module on sdk initialization.
|
|
|
|
|
*/
|
|
|
|
|
#define spn_FLOW_INIT_MODE "flow_init_mode"
|
|
|
|
|
|
|
|
|
|
/* Number of widest MPLS mem entries. */
|
|
|
|
|
#define spn_MPLS_MEM_ENTRIES "mpls_mem_entries"
|
|
|
|
|
|
|
|
|
|
/* Number of VLAN_XLATE_1 mem entries. */
|
|
|
|
|
#define spn_VLAN_XLATE_1_MEM_ENTRIES "vlan_xlate_1_mem_entries"
|
|
|
|
|
|
|
|
|
|
/* Number of VLAN_XLATE_2 mem entries. */
|
|
|
|
|
#define spn_VLAN_XLATE_2_MEM_ENTRIES "vlan_xlate_2_mem_entries"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* 1 - enable flow tracker(FTv1) embedded app
|
|
|
|
|
* 2 - enable flow tracker(FTv2) embedded app
|
|
|
|
|
* default value: 0 (disabled)
|
|
|
|
|
*/
|
|
|
|
|
#define spn_FLOWTRACKER_ENABLE "flowtracker_enable"
|
|
|
|
|
/*
|
|
|
|
|
* Maximum number of flow groups monitored by flowtracker embedded app
|
|
|
|
|
* default value: 255
|
|
|
|
|
*/
|
|
|
|
|
#define spn_FLOWTRACKER_MAX_FLOW_GROUPS "flowtracker_max_flow_groups"
|
|
|
|
|
/*
|
|
|
|
|
* Maximum number of flows that can be learnt. In multi-pipe devices, the flow limit
|
|
|
|
|
* is equally distributed among all the pipes, per pipe flow limit can be imposed by
|
|
|
|
|
* suffixing with _pipe<pipe_num>
|
|
|
|
|
* default value: 16K
|
|
|
|
|
*/
|
|
|
|
|
#define spn_FLOWTRACKER_MAX_FLOWS "flowtracker_max_flows"
|
|
|
|
|
/*
|
|
|
|
|
* Maximum number of counters that can be assigned to a single flow.
|
|
|
|
|
* Valid values currently supported are 1, 2 and 4.
|
|
|
|
|
* default value: 1
|
|
|
|
|
*/
|
|
|
|
|
#define spn_FLOWTRACKER_MAX_COUNTERS_PER_FLOW "flowtracker_max_counters_per_flow"
|
|
|
|
|
/*
|
|
|
|
|
* Maximum length of an export packet in bytes that will be sent by Flowtracker embedded app
|
|
|
|
|
* default value: 1500
|
|
|
|
|
*/
|
|
|
|
|
#define spn_FLOWTRACKER_MAX_EXPORT_PKT_LENGTH "flowtracker_max_export_pkt_length"
|
|
|
|
|
|
|
|
|
|
/* Enable elephant monitoring, 0 - Disable, 1 - Enable */
|
|
|
|
|
#define spn_FLOWTRACKER_ELEPHANT_ENABLE "flowtracker_elephant_enable"
|
|
|
|
|
|
|
|
|
|
/* Interval at which the flow table is scanned to detect elephant flows. */
|
|
|
|
|
#define spn_FLOWTRACKER_ELEPHANT_SCAN_INTERVAL_USECS "flowtracker_elephant_scan_interval_usecs"
|
|
|
|
|
|
|
|
|
|
/* Enables the tracking the flow start timestamp information element, 0 - Disable, 1 - Enable. */
|
|
|
|
|
#define spn_FLOWTRACKER_FLOW_START_TIMESTAMP_IE_ENABLE "flowtracker_flow_start_timestamp_ie_enable"
|
|
|
|
|
|
|
|
|
|
/* Export interval of the active flows in usecs */
|
|
|
|
|
#define spn_FLOWTRACKER_EXPORT_INTERVAL_USECS "flowtracker_export_interval_usecs"
|
|
|
|
|
/*
|
|
|
|
|
* Expected time required to drain the egress COS queues. Used to
|
|
|
|
|
* prevent re-ordering when demoting elephant flows to mice
|
|
|
|
|
*/
|
|
|
|
|
#define spn_FLOWTRACKER_ELEPHANT_EXPECTED_QUEUE_DRAIN_TIME_USECS "flowtracker_elephant_expected_queue_drain_time_usecs"
|
|
|
|
|
|
|
|
|
|
/* Enterprise number to be used when exporting template sets containing enterprise specific information elements */
|
|
|
|
|
#define spn_FLOWTRACKER_ENTERPRISE_NUMBER "flowtracker_enterprise_number"
|
|
|
|
|
|
|
|
|
|
/* Drop monitoring, 0 - Disable, 1 - Enable */
|
|
|
|
|
#define spn_FLOWTRACKER_DROP_MONITOR_ENABLE "flowtracker_drop_monitor_enable"
|
|
|
|
|
|
|
|
|
|
/* Enable host memory access 0 - Disable, 1 - Enable */
|
|
|
|
|
#define spn_FLOWTRACKER_HOSTMEM_ENABLE "flowtracker_hostmem_enable"
|
|
|
|
|
|
|
|
|
|
/* Maximum length of the reinjected FSP packet. Packets larger than this number are truncated prior to re-injection */
|
|
|
|
|
#define spn_FLOWTRACKER_FSP_REINJECT_MAX_LENGTH "flowtracker_fsp_reinject_max_length"
|
|
|
|
|
|
|
|
|
|
/* Interval at which the flow table is scanned to collect counter information in micro seconds. Minimum value allowed is 100000 micro seconds */
|
|
|
|
|
#define spn_FLOWTRACKER_SCAN_INTERVAL_USECS "flowtracker_scan_interval_usecs"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Normally, the system will use polling for register/memory S-Channel
|
|
|
|
|
* operations and interrupts for time-consuming operations such as ARL
|
|
|
|
|
* insert/delete. If this schan_intr_enable is set to 0, polling will be
|
|
|
|
|
* used for ALL operations.
|
|
|
|
|
*/
|
|
|
|
|
#define spn_SCHAN_INTR_ENABLE "schan_intr_enable"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Mode control to select L2 Table DMA mode aka L2MODE_POLL (0) or
|
|
|
|
|
* L2MOD_FIFO mechanism aka L2MODE_FIFO (1) for L2 table change notification.
|
|
|
|
|
*/
|
|
|
|
|
#define spn_L2XMSG_MODE "l2xmsg_mode"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Timeout for hardware-accelerated ARL delete operations including:
|
|
|
|
|
* delete by port, delete by port+modid, delete by VLAN, delete by trunk.
|
|
|
|
|
*/
|
|
|
|
|
#define spn_ARL_CLEAN_TIMEOUT_USEC "arl_clean_timeout_usec"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* BCM56960/BCM56970 : MMU Cell Buffer Allocation Profile to support ASF (cut-thru) Forwarding
|
|
|
|
|
* 0: No cut-through support
|
|
|
|
|
* 1: Similar speed profile (Default)
|
|
|
|
|
* 2: Extreme speed profile
|
|
|
|
|
*/
|
|
|
|
|
#define spn_ASF_MEM_PROFILE "asf_mem_profile"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Flag values to be ORd together:
|
|
|
|
|
* 0x0 indicates that counter DMA should NOT be used
|
|
|
|
|
* 0x1 indicates that counter DMA should be used (default).
|
|
|
|
|
*/
|
|
|
|
|
#define spn_BCM_STAT_FLAGS "bcm_stat_flags"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Threshold value for oversize (*OVR) frame size.
|
|
|
|
|
* Values over 1518 affect the *OVR statistics computation
|
|
|
|
|
*/
|
|
|
|
|
#define spn_BCM_STAT_JUMBO "bcm_stat_jumbo"
|
|
|
|
|
|
|
|
|
|
/* Counter DMA collection pass timeout in microseconds */
|
|
|
|
|
#define spn_CDMA_TIMEOUT_USEC "cdma_timeout_usec"
|
|
|
|
|
|
|
|
|
|
/* SBUSDMA descriptor mode operation timeout in microseconds */
|
|
|
|
|
#define spn_DMA_DESC_TIMEOUT_USEC "dma_desc_timeout_usec"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The maximum number of virtual port trunk groups
|
|
|
|
|
* (default is the maximum number supported by the device).
|
|
|
|
|
*/
|
|
|
|
|
#define spn_MAX_VP_LAGS "max_vp_lags"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If miim_intr_enable variable is set to 1, the system will use
|
|
|
|
|
* interrupts for MII operations since they take a while (70 usec or so).
|
|
|
|
|
* If this variable is set to 0, polling will be used for all MII
|
|
|
|
|
* operations.
|
|
|
|
|
*/
|
|
|
|
|
#define spn_MIIM_INTR_ENABLE "miim_intr_enable"
|
|
|
|
|
|
|
|
|
|
/* Device that can support more than 32 ports per single modid will operate in configuration where all ports are mapped to the base modid */
|
|
|
|
|
#define spn_MODULE_64PORTS "module_64ports"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Config to describe the system Linerate or Oversubscribe mode.
|
|
|
|
|
* 0: Linerate only (default).
|
|
|
|
|
* 1: Oversubscribe mode (all ports will be oversub).
|
|
|
|
|
* 2: Mixed mode. Check device specification for applicability. Port bitmap specified via pbmp_oversubscribe.
|
|
|
|
|
*/
|
|
|
|
|
#define spn_OVERSUBSCRIBE_MODE "oversubscribe_mode"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If phy_null_<port> is set to 1, the port will use the null PHY driver.
|
|
|
|
|
* This is useful for configuring direct-connect GMII links such as the
|
|
|
|
|
* chip-to-chip links on a 48-port board (example shown for 48 port board).
|
|
|
|
|
*/
|
|
|
|
|
#define spn_PHY_NULL "phy_null"
|
|
|
|
|
|
|
|
|
|
/* Core clock frequency applied to switch chip, any unsupported frequency will be ignored */
|
|
|
|
|
#define spn_CORE_CLOCK_FREQUENCY "core_clock_frequency"
|
|
|
|
|
|
|
|
|
|
/* DPR clock frequency applied to switch chip, any unsupported frequency will be ignored. */
|
|
|
|
|
#define spn_DPR_CLOCK_FREQUENCY "dpr_clock_frequency"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Indicates that the port module(macro) on which this physical port resides
|
|
|
|
|
* is flex enable or not.
|
|
|
|
|
* For BCM56860 based devices, the following applies:
|
|
|
|
|
* This property is per port macro. For port macros consisting of multiple
|
|
|
|
|
* smaller port macros, enabling flex on that port macro also enables
|
|
|
|
|
* flex on the smaller port macros.
|
|
|
|
|
* port_flex_enable{physical port number}=1 or 0
|
|
|
|
|
* Valid values are 0 or 1. Default value is 0.
|
|
|
|
|
* The given physical port number has to be the first physical port residing
|
|
|
|
|
* on the port macro.
|
|
|
|
|
*/
|
|
|
|
|
#define spn_PORT_FLEX_ENABLE "port_flex_enable"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Number of unicast and multicast queues per port
|
|
|
|
|
* mmu_port_num_mc_queue = 0 (12 unicast, 0 multicast)
|
|
|
|
|
* mmu_port_num_mc_queue = 1 (10 unicast, 2 multicast)
|
|
|
|
|
* mmu_port_num_mc_queue = 2 (8 unicast, 4 multicast)
|
|
|
|
|
* mmu_port_num_mc_queue = 3 (6 unicast, 6 multicast)
|
|
|
|
|
*/
|
|
|
|
|
#define spn_MMU_PORT_NUM_MC_QUEUE "mmu_port_num_mc_queue"
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* In BCM568xx and BCM567xx devices, some L2 and L3 multicast
|
|
|
|
|
* information is stored in a shared resource. This value describes
|
|
|
|
|
* the number of resource entries devoted to L2 multicast.
|
|
|
|
|
*/
|
|
|
|
|
#define spn_MULTICAST_L2_RANGE "multicast_l2_range"
|
賓少鈺
GitHub