From 3500f69fdb0faa55d1c2269fe46ff43faad64fab Mon Sep 17 00:00:00 2001 From: Liu Shilong Date: Sat, 12 Aug 2023 00:13:53 +0800 Subject: [PATCH] Revert "[Ufispace][PDDF] Add PDDF support on S9180-32X (#14909)" (#16092) This reverts commit d2b5d774c57a98f714da5c7885466dfeecff4e07. --- .../UFISPACE-S9180-32X/port_config.ini | 35 - .../UFISPACE-S9180-32X/switch-sai.conf | 33 - .../UFISPACE-S9180-32X/switch-tna-sai.conf | 39 - .../x86_64-ufispace_s9180_32x-r0/default_sku | 1 - .../x86_64-ufispace_s9180_32x-r0/fancontrol | 10 - .../installer.conf | 4 - .../x86_64-ufispace_s9180_32x-r0/pcie.yaml | 417 -- .../pddf/pd-plugin.json | 68 - .../pddf/pddf-device.json | 5879 ----------------- .../x86_64-ufispace_s9180_32x-r0/pddf_support | 0 .../platform.json | 547 -- .../platform_asic | 1 - .../pmon_daemon_control.json | 9 - .../x86_64-ufispace_s9180_32x-r0/sensors.conf | 9 - .../system_health_monitoring_config.json | 15 - platform/barefoot/bfn-platform-ufispace.mk | 5 - platform/barefoot/docker-saiserver-bfn.mk | 4 +- platform/barefoot/one-image.mk | 4 +- .../barefoot/platform-modules-ufispace.mk | 14 - platform/barefoot/rules.mk | 6 +- .../sonic-platform-modules-ufispace/LICENSE | 674 -- .../debian/changelog | 5 - .../debian/compat | 1 - .../debian/control | 10 - .../debian/rules | 88 - .../sonic-platform-ufispace-s9180-32x.install | 1 - ...sonic-platform-ufispace-s9180-32x.postinst | 5 - .../s9180-32x/modules/Makefile | 5 - .../s9180-32x/modules/i2c-smbus.c | 423 -- .../x86-64-ufispace-s9180-32x-sys-eeprom.c | 272 - .../service/pddf-platform-init.service | 1 - .../service/platform-swss-restart.service | 13 - .../s9180-32x/sonic_platform/__init__.py | 4 - .../s9180-32x/sonic_platform/chassis.py | 214 - .../s9180-32x/sonic_platform/component.py | 113 - .../s9180-32x/sonic_platform/eeprom.py | 14 - .../s9180-32x/sonic_platform/fan.py | 147 - .../s9180-32x/sonic_platform/fan_drawer.py | 17 - .../s9180-32x/sonic_platform/platform.py | 25 - .../s9180-32x/sonic_platform/psu.py | 38 - .../s9180-32x/sonic_platform/sfp.py | 17 - .../s9180-32x/sonic_platform/thermal.py | 17 - .../s9180-32x/sonic_platform/watchdog.py | 23 - .../s9180-32x/sonic_platform_setup.py | 27 - .../utils/pddf_post_device_create.sh | 93 - .../utils/pddf_post_driver_install.sh | 2 - .../utils/pddf_pre_driver_install.sh | 5 - .../s9180-32x/utils/pddf_switch_svc.py | 55 - .../s9180-32x/utils/platform_swss_restart.sh | 5 - .../s9180-32x/utils/pre_pddf_init.sh | 5 - 50 files changed, 5 insertions(+), 9414 deletions(-) delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/port_config.ini delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/switch-sai.conf delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/switch-tna-sai.conf delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/default_sku delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/fancontrol delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/installer.conf delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/pcie.yaml delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf/pd-plugin.json delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf/pddf-device.json delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf_support delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/platform.json delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/platform_asic delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/pmon_daemon_control.json delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/sensors.conf delete mode 100644 device/ufispace/x86_64-ufispace_s9180_32x-r0/system_health_monitoring_config.json delete mode 100644 platform/barefoot/bfn-platform-ufispace.mk delete mode 100644 platform/barefoot/platform-modules-ufispace.mk delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/LICENSE delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/debian/changelog delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/debian/compat delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/debian/control delete mode 100755 platform/barefoot/sonic-platform-modules-ufispace/debian/rules delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/debian/sonic-platform-ufispace-s9180-32x.install delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/debian/sonic-platform-ufispace-s9180-32x.postinst delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/Makefile delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/i2c-smbus.c delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/x86-64-ufispace-s9180-32x-sys-eeprom.c delete mode 120000 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/service/pddf-platform-init.service delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/service/platform-swss-restart.service delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/__init__.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/chassis.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/component.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/eeprom.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/fan.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/fan_drawer.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/platform.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/psu.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/sfp.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/thermal.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/watchdog.py delete mode 100644 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform_setup.py delete mode 100755 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_post_device_create.sh delete mode 100755 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_post_driver_install.sh delete mode 100755 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_pre_driver_install.sh delete mode 100755 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_switch_svc.py delete mode 100755 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/platform_swss_restart.sh delete mode 100755 platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pre_pddf_init.sh diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/port_config.ini b/device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/port_config.ini deleted file mode 100644 index 3012ba99dd..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/port_config.ini +++ /dev/null @@ -1,35 +0,0 @@ -# name lanes alias speed autoneg fec index -Ethernet0 0,1,2,3 Ethernet0 100000 off none 0 -Ethernet4 4,5,6,7 Ethernet4 100000 off none 1 -Ethernet8 8,9,10,11 Ethernet8 100000 off none 2 -Ethernet12 12,13,14,15 Ethernet12 100000 off none 3 -Ethernet16 16,17,18,19 Ethernet16 100000 off none 4 -Ethernet20 20,21,22,23 Ethernet20 100000 off none 5 -Ethernet24 24,25,26,27 Ethernet24 100000 off none 6 -Ethernet28 28,29,30,31 Ethernet28 100000 off none 7 -Ethernet32 32,33,34,35 Ethernet32 100000 off none 8 -Ethernet36 36,37,38,39 Ethernet36 100000 off none 9 -Ethernet40 40,41,42,43 Ethernet40 100000 off none 10 -Ethernet44 44,45,46,47 Ethernet44 100000 off none 11 -Ethernet48 48,49,50,51 Ethernet48 100000 off none 12 -Ethernet52 52,53,54,55 Ethernet52 100000 off none 13 -Ethernet56 56,57,58,59 Ethernet56 100000 off none 14 -Ethernet60 60,61,62,63 Ethernet60 100000 off none 15 -Ethernet64 64,65,66,67 Ethernet64 100000 off none 16 -Ethernet68 68,69,70,71 Ethernet68 100000 off none 17 -Ethernet72 72,73,74,75 Ethernet72 100000 off none 18 -Ethernet76 76,77,78,79 Ethernet76 100000 off none 19 -Ethernet80 80,81,82,83 Ethernet80 100000 off none 20 -Ethernet84 84,85,86,87 Ethernet84 100000 off none 21 -Ethernet88 88,89,90,91 Ethernet88 100000 off none 22 -Ethernet92 92,93,94,95 Ethernet92 100000 off none 23 -Ethernet96 96,97,98,99 Ethernet96 100000 off none 24 -Ethernet100 100,101,102,103 Ethernet100 100000 off none 25 -Ethernet104 104,105,106,107 Ethernet104 100000 off none 26 -Ethernet108 108,109,110,111 Ethernet108 100000 off none 27 -Ethernet112 112,113,114,115 Ethernet112 100000 off none 28 -Ethernet116 116,117,118,119 Ethernet116 100000 off none 29 -Ethernet120 120,121,122,123 Ethernet120 100000 off none 30 -Ethernet124 124,125,126,127 Ethernet124 100000 off none 31 -Ethernet128 128 Ethernet128 10000 off none 32 -Ethernet129 129 Ethernet129 10000 off none 33 \ No newline at end of file diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/switch-sai.conf b/device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/switch-sai.conf deleted file mode 100644 index c3a384ed07..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/switch-sai.conf +++ /dev/null @@ -1,33 +0,0 @@ -{ - "chip_list": [ - { - "id": "asic-0", - "chip_family": "Tofino", - "instance": 0, - "pcie_sysfs_prefix": "/sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0", - "pcie_domain": 0, - "pcie_bus": 5, - "pcie_fn": 0, - "pcie_dev": 0, - "pcie_int_mode": 1, - "sds_fw_path": "share/tofino_sds_fw/avago/firmware" - } - ], - "instance": 0, - "p4_program_list": [ - { - "id": "pgm-0", - "instance": 0, - "path": "switch", - "program-name": "switch", - "pd": "lib/tofinopd/switch/libpd.so", - "pd-thrift": "lib/tofinopd/switch/libpdthrift.so", - "table-config": "share/tofinopd/switch/context.json", - "tofino-bin": "share/tofinopd/switch/tofino.bin", - "switchapi": "lib/libswitchapi.so", - "sai": "lib/libsai.so", - "agent0": "lib/platform/x86_64-ufispace_s9180_32x-r0/libpltfm_mgr.so", - "switchapi_port_add": false - } - ] -} diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/switch-tna-sai.conf b/device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/switch-tna-sai.conf deleted file mode 100644 index 8cd3c6e353..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/UFISPACE-S9180-32X/switch-tna-sai.conf +++ /dev/null @@ -1,39 +0,0 @@ -{ - "chip_list": [ - { - "chip_family": "Tofino", - "sds_fw_path": "share/tofino_sds_fw/avago/firmware", - "instance": 0 - } - ], - "p4_devices": [ - { - "device-id": 0, - "agent0": "lib/platform/x86_64-ufispace_s9180_32x-r0/libpltfm_mgr.so", - "p4_programs": [ - { - "p4_pipelines": [ - { - "p4_pipeline_name": "pipe", - "config": "share/switch/pipe/tofino.bin", - "context": "share/switch/pipe/context.json" - } - ], - "program-name": "switch", - "bfrt-config": "share/switch/bf-rt.json", - "model_json_path" : "share/switch/aug_model.json", - "switchapi_port_add": false, - "non_default_port_ppgs": 5 - } - ] - } - ], - "switch_options": [ - { - "device-id": 0, - "model_json_path": "share/switch/aug_model.json", - "non_default_port_ppgs": 5, - "switchapi_port_add": false - } - ] -} diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/default_sku b/device/ufispace/x86_64-ufispace_s9180_32x-r0/default_sku deleted file mode 100644 index 0effd567eb..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/default_sku +++ /dev/null @@ -1 +0,0 @@ -UFISPACE-S9180-32X t1 diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/fancontrol b/device/ufispace/x86_64-ufispace_s9180_32x-r0/fancontrol deleted file mode 100644 index 1234cd994f..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/fancontrol +++ /dev/null @@ -1,10 +0,0 @@ -# Configuration file generated by pwmconfig, changes will be lost -INTERVAL=10 -DEVPATH= -DEVNAME= -FCTEMPS= -FCFANS= -MINTEMP= -MAXTEMP= -MINSTART= -MINSTOP= diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/installer.conf b/device/ufispace/x86_64-ufispace_s9180_32x-r0/installer.conf deleted file mode 100644 index 8f9944da69..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/installer.conf +++ /dev/null @@ -1,4 +0,0 @@ -CONSOLE_PORT=0x3f8 -CONSOLE_DEV=0 -CONSOLE_SPEED=115200 -ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="module_blacklist=gpio_ich nomodeset pcie_aspm=off" diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/pcie.yaml b/device/ufispace/x86_64-ufispace_s9180_32x-r0/pcie.yaml deleted file mode 100644 index adafbe61e6..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/pcie.yaml +++ /dev/null @@ -1,417 +0,0 @@ -- bus: '00' - dev: '00' - fn: '0' - id: 6f00 - name: 'Host bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 - (rev 03)' -- bus: '00' - dev: '02' - fn: '0' - id: 6f04 - name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI - Express Root Port 2 (rev 03)' -- bus: '00' - dev: '02' - fn: '2' - id: 6f06 - name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI - Express Root Port 2 (rev 03)' -- bus: '00' - dev: '03' - fn: '0' - id: 6f08 - name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI - Express Root Port 3 (rev 03)' -- bus: '00' - dev: '03' - fn: '1' - id: 6f09 - name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI - Express Root Port 3 (rev 03)' -- bus: '00' - dev: '03' - fn: '2' - id: 6f0a - name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI - Express Root Port 3 (rev 03)' -- bus: '00' - dev: '03' - fn: '3' - id: 6f0b - name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI - Express Root Port 3 (rev 03)' -- bus: '00' - dev: '05' - fn: '0' - id: 6f28 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Map/VTd_Misc/System Management (rev 03)' -- bus: '00' - dev: '05' - fn: '1' - id: 6f29 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D IIO Hot Plug (rev 03)' -- bus: '00' - dev: '05' - fn: '2' - id: 6f2a - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D IIO RAS/Control Status/Global Errors (rev 03)' -- bus: '00' - dev: '05' - fn: '4' - id: 6f2c - name: 'PIC: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC (rev - 03)' -- bus: '00' - dev: '14' - fn: '0' - id: 8c31 - name: 'USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB - xHCI (rev 05)' -- bus: '00' - dev: 1c - fn: '0' - id: 8c10 - name: 'PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express - Root Port #1 (rev d5)' -- bus: '00' - dev: 1f - fn: '0' - id: 8c54 - name: 'ISA bridge: Intel Corporation C224 Series Chipset Family Server Standard - SKU LPC Controller (rev 05)' -- bus: '00' - dev: 1f - fn: '2' - id: 8c02 - name: 'SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port - SATA Controller 1 [AHCI mode] (rev 05)' -- bus: '00' - dev: 1f - fn: '3' - id: 8c22 - name: 'SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller - (rev 05)' -- bus: '01' - dev: '00' - fn: '0' - id: 6f50 - name: 'System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology - Register DMA Channel 0' -- bus: '01' - dev: '00' - fn: '1' - id: 6f51 - name: 'System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology - Register DMA Channel 1' -- bus: '01' - dev: '00' - fn: '2' - id: 6f52 - name: 'System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology - Register DMA Channel 2' -- bus: '01' - dev: '00' - fn: '3' - id: 6f53 - name: 'System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology - Register DMA Channel 3' -- bus: '02' - dev: '00' - fn: '0' - id: 15ab - name: 'Ethernet controller: Intel Corporation Ethernet Connection X552 10 GbE Backplane' -- bus: '02' - dev: '00' - fn: '1' - id: 15ab - name: 'Ethernet controller: Intel Corporation Ethernet Connection X552 10 GbE Backplane' -- bus: '04' - dev: '00' - fn: '0' - id: '0010' - name: 'Unassigned class [ff00]: Device 1d1c:0010 (rev 10)' -- bus: 08 - dev: '00' - fn: '0' - id: '1533' - name: 'Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev - 03)' -- bus: ff - dev: 0b - fn: '0' - id: 6f81 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D R3 QPI Link 0/1 (rev 03)' -- bus: ff - dev: 0b - fn: '1' - id: 6f36 - name: 'Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D R3 QPI Link 0/1 (rev 03)' -- bus: ff - dev: 0b - fn: '2' - id: 6f37 - name: 'Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D R3 QPI Link 0/1 (rev 03)' -- bus: ff - dev: 0b - fn: '3' - id: 6f76 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D R3 QPI Link Debug (rev 03)' -- bus: ff - dev: 0c - fn: '0' - id: 6fe0 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Caching Agent (rev 03)' -- bus: ff - dev: 0c - fn: '1' - id: 6fe1 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Caching Agent (rev 03)' -- bus: ff - dev: 0c - fn: '2' - id: 6fe2 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Caching Agent (rev 03)' -- bus: ff - dev: 0c - fn: '3' - id: 6fe3 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Caching Agent (rev 03)' -- bus: ff - dev: 0f - fn: '0' - id: 6ff8 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Caching Agent (rev 03)' -- bus: ff - dev: 0f - fn: '4' - id: 6ffc - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Caching Agent (rev 03)' -- bus: ff - dev: 0f - fn: '5' - id: 6ffd - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Caching Agent (rev 03)' -- bus: ff - dev: 0f - fn: '6' - id: 6ffe - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Caching Agent (rev 03)' -- bus: ff - dev: '10' - fn: '0' - id: 6f1d - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D R2PCIe Agent (rev 03)' -- bus: ff - dev: '10' - fn: '1' - id: 6f34 - name: 'Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D R2PCIe Agent (rev 03)' -- bus: ff - dev: '10' - fn: '5' - id: 6f1e - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Ubox (rev 03)' -- bus: ff - dev: '10' - fn: '6' - id: 6f7d - name: 'Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Ubox (rev 03)' -- bus: ff - dev: '10' - fn: '7' - id: 6f1f - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Ubox (rev 03)' -- bus: ff - dev: '12' - fn: '0' - id: 6fa0 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Home Agent 0 (rev 03)' -- bus: ff - dev: '12' - fn: '1' - id: 6f30 - name: 'Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Home Agent 0 (rev 03)' -- bus: ff - dev: '13' - fn: '0' - id: 6fa8 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Target Address/Thermal/RAS (rev 03)' -- bus: ff - dev: '13' - fn: '1' - id: 6f71 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Target Address/Thermal/RAS (rev 03)' -- bus: ff - dev: '13' - fn: '2' - id: 6faa - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel Target Address Decoder (rev 03)' -- bus: ff - dev: '13' - fn: '3' - id: 6fab - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel Target Address Decoder (rev 03)' -- bus: ff - dev: '13' - fn: '4' - id: 6fac - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel Target Address Decoder (rev 03)' -- bus: ff - dev: '13' - fn: '5' - id: 6fad - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel Target Address Decoder (rev 03)' -- bus: ff - dev: '13' - fn: '6' - id: 6fae - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D DDRIO Channel 0/1 Broadcast (rev 03)' -- bus: ff - dev: '13' - fn: '7' - id: 6faf - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D DDRIO Global Broadcast (rev 03)' -- bus: ff - dev: '14' - fn: '0' - id: 6fb0 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel 0 Thermal Control (rev 03)' -- bus: ff - dev: '14' - fn: '1' - id: 6fb1 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel 1 Thermal Control (rev 03)' -- bus: ff - dev: '14' - fn: '2' - id: 6fb2 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel 0 Error (rev 03)' -- bus: ff - dev: '14' - fn: '3' - id: 6fb3 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel 1 Error (rev 03)' -- bus: ff - dev: '14' - fn: '4' - id: 6fbc - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D DDRIO Channel 0/1 Interface (rev 03)' -- bus: ff - dev: '14' - fn: '5' - id: 6fbd - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D DDRIO Channel 0/1 Interface (rev 03)' -- bus: ff - dev: '14' - fn: '6' - id: 6fbe - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D DDRIO Channel 0/1 Interface (rev 03)' -- bus: ff - dev: '14' - fn: '7' - id: 6fbf - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D DDRIO Channel 0/1 Interface (rev 03)' -- bus: ff - dev: '15' - fn: '0' - id: 6fb4 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel 2 Thermal Control (rev 03)' -- bus: ff - dev: '15' - fn: '1' - id: 6fb5 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel 3 Thermal Control (rev 03)' -- bus: ff - dev: '15' - fn: '2' - id: 6fb6 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel 2 Error (rev 03)' -- bus: ff - dev: '15' - fn: '3' - id: 6fb7 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Memory Controller 0 - Channel 3 Error (rev 03)' -- bus: ff - dev: 1e - fn: '0' - id: 6f98 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Power Control Unit (rev 03)' -- bus: ff - dev: 1e - fn: '1' - id: 6f99 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Power Control Unit (rev 03)' -- bus: ff - dev: 1e - fn: '2' - id: 6f9a - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Power Control Unit (rev 03)' -- bus: ff - dev: 1e - fn: '3' - id: 6fc0 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Power Control Unit (rev 03)' -- bus: ff - dev: 1e - fn: '4' - id: 6f9c - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Power Control Unit (rev 03)' -- bus: ff - dev: 1f - fn: '0' - id: 6f88 - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Power Control Unit (rev 03)' -- bus: ff - dev: 1f - fn: '2' - id: 6f8a - name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon - D Power Control Unit (rev 03)' diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf/pd-plugin.json b/device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf/pd-plugin.json deleted file mode 100644 index 41b5802fc4..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf/pd-plugin.json +++ /dev/null @@ -1,68 +0,0 @@ -{ - - "XCVR": - { - "xcvr_present": - { - "i2c": - { - "valmap-SFP": {"1":true, "0":false}, - "valmap-QSFP": {"1":true, "0":false} - } - } - }, - "PSU": - { - "psu_present": - { - "i2c": - { - "valmap": { "1":true, "0":false } - }, - "bmc": - { - "valmap": { "0x0280|":true, "0x0180|":false } - } - }, - - "psu_power_good": - { - "i2c": - { - "valmap": { "1": true, "0":false } - }, - "bmc": - { - "valmap": { "0x0280|":true, "0x0180|":false } - } - }, - - "PSU_FAN_MAX_SPEED":"18000" - }, - - "FAN": - { - "direction": - { - "bmc": - { - "valmap": {"0": "UNKNOWN", "1":"INTAKE", "2":"EXHAUST"} - } - }, - - "present": - { - "i2c": - { - "valmap": {"1":true, "0":false} - }, - "bmc": - { - "valmap": { "0x0280|":true, "0x0180|":false } - } - }, - "FAN_R_MAX_SPEED":"22000", - "FAN_F_MAX_SPEED":"22000" - } - -} diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf/pddf-device.json b/device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf/pddf-device.json deleted file mode 100644 index b089cb4cb1..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf/pddf-device.json +++ /dev/null @@ -1,5879 +0,0 @@ -{ - "PLATFORM": { - "num_psus": 2, - "num_fantrays": 4, - "num_fans_pertray": 2, - "num_ports": 34, - "num_temps": 9, - "pddf_dev_types": { - "description": "PDDF supported devices", - "CPLD": [ - "i2c_cpld" - ], - "PSU": [ - "psu_eeprom", - "psu_pmbus" - ], - "PORT_MODULE": [ - "pddf_xcvr" - ] - }, - "std_kos": [ - "i2c_i801", - "i2c_dev", - "i2c_mux_pca954x", - "optoe", - "lm75", - "gpio-pca953x" - ], - "pddf_kos": [ - "pddf_client_module", - "pddf_cpld_module", - "pddf_cpld_driver", - "pddf_mux_module", - "pddf_xcvr_module", - "pddf_xcvr_driver_module", - "pddf_psu_driver_module", - "pddf_psu_module", - "pddf_fan_driver_module", - "pddf_fan_module", - "pddf_led_module", - "pddf_gpio_module" - ], - "custom_kos": [ - "x86-64-ufispace-s9180-32x-sys-eeprom" - ] - }, - "SYSTEM": { - "dev_info": { - "device_type": "CPU", - "device_name": "ROOT_COMPLEX", - "device_parent": null - }, - "i2c": { - "CONTROLLERS": [ - { - "dev_name": "i2c-0", - "dev": "SMBUS0" - } - ] - } - }, - "SMBUS0": { - "dev_info": { - "device_type": "SMBUS", - "device_name": "SMBUS0", - "device_parent": "SYSTEM" - }, - "i2c": { - "topo_info": { - "dev_addr": "0x0" - }, - "DEVICES": [ - { - "dev": "EEPROM1" - }, - { - "dev": "MUX1" - }, - { - "dev": "GPIO10" - }, - { - "dev": "TEMP1" - } - ] - } - }, - "EEPROM1": { - "dev_info": { - "device_type": "EEPROM", - "device_name": "EEPROM1", - "device_parent": "SMBUS0" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0", - "dev_addr": "0x51", - "dev_type": "sys_eeprom" - }, - "dev_attr": { - "access_mode": "BLOCK" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "TEMP1": { - "dev_info": { - "device_type": "TEMP_SENSOR", - "device_name": "TEMP1", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "display_name": "Temp_CPU_BOARD" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0", - "dev_addr": "0x4f", - "dev_type": "tmp75" - }, - "attr_list": [ - { - "attr_name": "temp1_high_crit_threshold", - "drv_attr_name": "temp1_max" - }, - { - "attr_name": "temp1_max_hyst" - }, - { - "attr_name": "temp1_input" - } - ] - } - }, - "TEMP2": { - "dev_info": { - "device_type": "TEMP_SENSOR", - "device_name": "TEMP2", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "display_name": "Temp_BMC" - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "temp1_input", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_BMC", - "field_pos": "3" - }, - { - "attr_name": "temp1_high_crit_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_BMC", - "field_pos": "18" - }, - { - "attr_name": "temp1_high_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_BMC", - "field_pos": "16" - } - ] - } - } - }, - "TEMP3": { - "dev_info": { - "device_type": "TEMP_SENSOR", - "device_name": "TEMP3", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "display_name": "Temp_MAC" - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "temp1_input", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_MAC", - "field_pos": "3" - }, - { - "attr_name": "temp1_high_crit_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_MAC", - "field_pos": "18" - }, - { - "attr_name": "temp1_high_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_MAC", - "field_pos": "16" - } - ] - } - } - }, - "TEMP4": { - "dev_info": { - "device_type": "TEMP_SENSOR", - "device_name": "TEMP4", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "display_name": "Temp_MAC_Front" - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "temp1_input", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_MAC_Front", - "field_pos": "3" - }, - { - "attr_name": "temp1_high_crit_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_MAC_Front", - "field_pos": "18" - }, - { - "attr_name": "temp1_high_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_MAC_Front", - "field_pos": "16" - } - ] - } - } - }, - "TEMP5": { - "dev_info": { - "device_type": "TEMP_SENSOR", - "device_name": "TEMP5", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "display_name": "Temp_MAC_Rear" - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "temp1_input", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_MAC_Rear", - "field_pos": "3" - }, - { - "attr_name": "temp1_high_crit_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_MAC_Rear", - "field_pos": "18" - }, - { - "attr_name": "temp1_high_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_MAC_Rear", - "field_pos": "16" - } - ] - } - } - }, - "TEMP6": { - "dev_info": { - "device_type": "TEMP_SENSOR", - "device_name": "TEMP6", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "display_name": "Temp_PSU1_AMB" - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "temp1_input", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU1_AMB", - "field_pos": "3" - }, - { - "attr_name": "temp1_high_crit_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU1_AMB", - "field_pos": "18" - }, - { - "attr_name": "temp1_high_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU1_AMB", - "field_pos": "16" - } - ] - } - } - }, - "TEMP7": { - "dev_info": { - "device_type": "TEMP_SENSOR", - "device_name": "TEMP7", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "display_name": "Temp_PSU1_HS" - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "temp1_input", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU1_HS", - "field_pos": "3" - }, - { - "attr_name": "temp1_high_crit_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU1_HS", - "field_pos": "18" - }, - { - "attr_name": "temp1_high_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU1_HS", - "field_pos": "16" - } - ] - } - } - }, - "TEMP8": { - "dev_info": { - "device_type": "TEMP_SENSOR", - "device_name": "TEMP8", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "display_name": "Temp_PSU2_AMB" - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "temp1_input", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU2_AMB", - "field_pos": "3" - }, - { - "attr_name": "temp1_high_crit_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU2_AMB", - "field_pos": "18" - }, - { - "attr_name": "temp1_high_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU2_AMB", - "field_pos": "16" - } - ] - } - } - }, - "TEMP9": { - "dev_info": { - "device_type": "TEMP_SENSOR", - "device_name": "TEMP9", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "display_name": "Temp_PSU2_HS" - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "temp1_input", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU2_HS", - "field_pos": "3" - }, - { - "attr_name": "temp1_high_crit_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU2_HS", - "field_pos": "18" - }, - { - "attr_name": "temp1_high_threshold", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU2_HS", - "field_pos": "16" - } - ] - } - } - }, - "MUX1": { - "dev_info": { - "device_type": "MUX", - "device_name": "MUX1", - "device_parent": "SMBUS0" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0", - "dev_addr": "0x70", - "dev_type": "pca9548" - }, - "dev_attr": { - "virt_bus": "0x1", - "idle_state": "-2" - }, - "channel": [ - { - "chn": "0", - "dev": "MUX2" - }, - { - "chn": "1", - "dev": "MUX3" - }, - { - "chn": "2", - "dev": "MUX4" - }, - { - "chn": "3", - "dev": "MUX5" - }, - { - "chn": "4", - "dev": "GPIO1" - }, - { - "chn": "4", - "dev": "GPIO2" - }, - { - "chn": "4", - "dev": "GPIO3" - }, - { - "chn": "4", - "dev": "GPIO4" - }, - { - "chn": "4", - "dev": "GPIO5" - }, - { - "chn": "5", - "dev": "GPIO6" - }, - { - "chn": "5", - "dev": "GPIO7" - }, - { - "chn": "5", - "dev": "GPIO8" - }, - { - "chn": "5", - "dev": "GPIO9" - }, - { - "chn": "6", - "dev": "MUX6" - } - ] - } - }, - "MUX2": { - "dev_info": { - "device_type": "MUX", - "device_name": "MUX2", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1", - "dev_addr": "0x71", - "dev_type": "pca9548" - }, - "dev_attr": { - "virt_bus": "0x9", - "idle_state": "-2" - }, - "channel": [ - { - "chn": "0", - "dev": "PORT1" - }, - { - "chn": "1", - "dev": "PORT2" - }, - { - "chn": "2", - "dev": "PORT3" - }, - { - "chn": "3", - "dev": "PORT4" - }, - { - "chn": "4", - "dev": "PORT5" - }, - { - "chn": "5", - "dev": "PORT6" - }, - { - "chn": "6", - "dev": "PORT7" - }, - { - "chn": "7", - "dev": "PORT8" - } - ] - } - }, - "MUX3": { - "dev_info": { - "device_type": "MUX", - "device_name": "MUX3", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x2", - "dev_addr": "0x71", - "dev_type": "pca9548" - }, - "dev_attr": { - "virt_bus": "0x11", - "idle_state": "-2" - }, - "channel": [ - { - "chn": "0", - "dev": "PORT9" - }, - { - "chn": "1", - "dev": "PORT10" - }, - { - "chn": "2", - "dev": "PORT11" - }, - { - "chn": "3", - "dev": "PORT12" - }, - { - "chn": "4", - "dev": "PORT13" - }, - { - "chn": "5", - "dev": "PORT14" - }, - { - "chn": "6", - "dev": "PORT15" - }, - { - "chn": "7", - "dev": "PORT16" - } - ] - } - }, - "MUX4": { - "dev_info": { - "device_type": "MUX", - "device_name": "MUX4", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x3", - "dev_addr": "0x71", - "dev_type": "pca9548" - }, - "dev_attr": { - "virt_bus": "0x19", - "idle_state": "-2" - }, - "channel": [ - { - "chn": "0", - "dev": "PORT17" - }, - { - "chn": "1", - "dev": "PORT18" - }, - { - "chn": "2", - "dev": "PORT19" - }, - { - "chn": "3", - "dev": "PORT20" - }, - { - "chn": "4", - "dev": "PORT21" - }, - { - "chn": "5", - "dev": "PORT22" - }, - { - "chn": "6", - "dev": "PORT23" - }, - { - "chn": "7", - "dev": "PORT24" - } - ] - } - }, - "MUX5": { - "dev_info": { - "device_type": "MUX", - "device_name": "MUX5", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x4", - "dev_addr": "0x71", - "dev_type": "pca9548" - }, - "dev_attr": { - "virt_bus": "0x21", - "idle_state": "-2" - }, - "channel": [ - { - "chn": "0", - "dev": "PORT25" - }, - { - "chn": "1", - "dev": "PORT26" - }, - { - "chn": "2", - "dev": "PORT27" - }, - { - "chn": "3", - "dev": "PORT28" - }, - { - "chn": "4", - "dev": "PORT29" - }, - { - "chn": "5", - "dev": "PORT30" - }, - { - "chn": "6", - "dev": "PORT31" - }, - { - "chn": "7", - "dev": "PORT32" - } - ] - } - }, - "MUX6": { - "dev_info": { - "device_type": "MUX", - "device_name": "MUX6", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x7", - "dev_addr": "0x71", - "dev_type": "pca9548" - }, - "dev_attr": { - "virt_bus": "0x29", - "idle_state": "-2" - }, - "channel": [ - { - "chn": "3", - "dev": "CPLD1" - }, - { - "chn": "4", - "dev": "PORT33" - }, - { - "chn": "5", - "dev": "PORT34" - } - ] - } - }, - "GPIO1": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO1", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x5", - "dev_addr": "0x20", - "dev_type": "pca9555" - }, - "dev_attr": { - "gpio_base": "0x1f0" - }, - "ports": [ - { - "port_num": "0", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "1", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "2", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "3", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "4", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "5", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "6", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "7", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "8", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "9", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "10", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "11", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "12", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "13", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "14", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "15", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - } - ] - } - }, - "GPIO2": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO2", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x5", - "dev_addr": "0x21", - "dev_type": "pca9555" - }, - "dev_attr": { - "gpio_base": "0x1e0" - }, - "ports": [ - { - "port_num": "0", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "1", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "2", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "3", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "4", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "5", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "6", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "7", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "8", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "9", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "10", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "11", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "12", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "13", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "14", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "15", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - } - ] - } - }, - "GPIO3": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO3", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x5", - "dev_addr": "0x22", - "dev_type": "pca9555" - }, - "dev_attr": { - "gpio_base": "0x1d0" - }, - "ports": [ - { - "port_num": "0", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "1", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "2", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "3", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "4", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "5", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "6", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "7", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "8", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "9", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "10", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "11", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "12", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "13", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "14", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "15", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - } - ] - } - }, - "GPIO4": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO4", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x5", - "dev_addr": "0x23", - "dev_type": "pca9555" - }, - "dev_attr": { - "gpio_base": "0x1c0" - }, - "ports": [ - { - "port_num": "0", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "1", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "2", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "3", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "4", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "5", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "6", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "7", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "8", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "9", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "10", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "11", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "12", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "13", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "14", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "15", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - } - ] - } - }, - "GPIO5": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO5", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x5", - "dev_addr": "0x27", - "dev_type": "pca9555" - }, - "dev_attr": { - "gpio_base": "0x1b0" - }, - "ports": [ - { - "port_num": "0", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "1", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "2", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "3", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "4", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "5", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "6", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "7", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "8", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "9", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "10", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "11", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "12", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "13", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "14", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "15", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - } - ] - } - }, - "GPIO6": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO6", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x6", - "dev_addr": "0x20", - "dev_type": "pca9555" - }, - "dev_attr": { - "gpio_base": "0x1a0" - }, - "ports": [ - { - "port_num": "0", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "1", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "2", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "3", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "4", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "5", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "6", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "7", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "8", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "9", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "10", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "11", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "12", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "13", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "14", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "15", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - } - ] - } - }, - "GPIO7": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO7", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x6", - "dev_addr": "0x21", - "dev_type": "pca9555" - }, - "dev_attr": { - "gpio_base": "0x190" - }, - "ports": [ - { - "port_num": "0", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "1", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "2", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "3", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "4", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "5", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "6", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "7", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "8", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "9", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "10", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "11", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "12", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "13", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "14", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "15", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - } - ] - } - }, - "GPIO8": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO8", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x6", - "dev_addr": "0x22", - "dev_type": "pca9555" - }, - "dev_attr": { - "gpio_base": "0x180" - }, - "ports": [ - { - "port_num": "0", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "1", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "2", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "3", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "4", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "5", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "6", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "7", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "8", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "9", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "10", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "11", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "12", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "13", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "14", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "15", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - } - ] - } - }, - "GPIO9": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO9", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x6", - "dev_addr": "0x23", - "dev_type": "pca9555" - }, - "dev_attr": { - "gpio_base": "0x170" - }, - "ports": [ - { - "port_num": "0", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "1", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "2", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "3", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "4", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "5", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "6", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "7", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "8", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "9", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "10", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "11", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "12", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "13", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "14", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - }, - { - "port_num": "15", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "0" - } - ] - } - }, - "GPIO10": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO10", - "device_parent": "SMBUS0" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0", - "dev_addr": "0x77", - "dev_type": "pca9539" - }, - "dev_attr": { - "gpio_base": "0x160" - }, - "ports": [ - { - "port_num": "0", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "1", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "2", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "3", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "4", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "5", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "6", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "7", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "8", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "9", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "10", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "11", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "12", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "13", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "14", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "15", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - } - ] - } - }, - "GPIO11": { - "dev_info": { - "device_type": "GPIO", - "device_name": "GPIO11", - "device_parent": "SMBUS0" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0", - "dev_addr": "0x74", - "dev_type": "pca9539" - }, - "dev_attr": { - "gpio_base": "0x150" - }, - "ports": [ - { - "port_num": "0", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "1", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "2", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "3", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "4", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "5", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "6", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "7", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "8", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "9", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "10", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "11", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "12", - "direction": "in", - "value": "", - "edge": "", - "active_low": "" - }, - { - "port_num": "13", - "direction": "out", - "value": "0", - "edge": "", - "active_low": "" - }, - { - "port_num": "14", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - }, - { - "port_num": "15", - "direction": "out", - "value": "1", - "edge": "", - "active_low": "" - } - ] - } - }, - "CPLD1": { - "dev_info": { - "device_type": "CPLD", - "device_name": "CPLD1", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x2", - "dev_addr": "0x30", - "dev_type": "i2c_cpld" - }, - "dev_attr": {} - } - }, - "CPLD2": { - "dev_info": { - "device_type": "CPLD", - "device_name": "CPLD2", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x2", - "dev_addr": "0x31", - "dev_type": "i2c_cpld" - }, - "dev_attr": {} - } - }, - "CPLD3": { - "dev_info": { - "device_type": "CPLD", - "device_name": "CPLD3", - "device_parent": "MUX1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x2", - "dev_addr": "0x32", - "dev_type": "i2c_cpld" - }, - "dev_attr": {} - } - }, - "PSU1": { - "dev_info": { - "device_type": "PSU", - "device_name": "PSU1", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "dev_idx": "1", - "num_psu_fans": "1" - }, - "i2c": { - "interface": [] - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "psu_present", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "PSU1_PRSNT", - "field_pos": "7" - }, - { - "attr_name": "psu_power_good", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "PSU1_PWROK", - "field_pos": "7" - }, - { - "attr_name": "psu_temp1_input", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU1_AMB", - "field_pos": "3", - "mult": "1000" - }, - { - "attr_name": "psu_fan1_speed_rpm", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Fan_PSU1", - "field_pos": "3" - }, - { - "attr_name": "psu_mfr_id", - "bmc_cmd": "ipmitool fru print 1 | tr -s ' ' | cut -d' ' -f3-5", - "raw": "0", - "field_name": "Manufacturer", - "field_pos": "3", - "delimiter": ":" - }, - { - "attr_name": "psu_model_name", - "bmc_cmd": "ipmitool fru print 1 | tr -s ' ' | cut -d' ' -f3-5", - "raw": "0", - "field_name": "Name", - "field_pos": "3", - "delimiter": ":" - }, - { - "attr_name": "psu_serial_num", - "bmc_cmd": "ipmitool fru print 1 | tr -s ' ' | cut -d' ' -f3-5", - "raw": "0", - "field_name": "Serial", - "field_pos": "3", - "delimiter": ":" - }, - { - "attr_name": "psu_v_out", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "VOUT_PSU1", - "field_pos": "3", - "mult": "1000" - }, - { - "attr_name": "psu_i_out", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "IOUT_PSU1", - "field_pos": "3", - "mult": "1000" - } - ] - } - } - }, - "PSU2": { - "dev_info": { - "device_type": "PSU", - "device_name": "PSU2", - "device_parent": "SMBUS0" - }, - "dev_attr": { - "dev_idx": "2", - "num_psu_fans": "1" - }, - "i2c": { - "interface": [] - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "psu_present", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "PSU2_PRSNT", - "field_pos": "7" - }, - { - "attr_name": "psu_power_good", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "PSU2_PWROK", - "field_pos": "7" - }, - { - "attr_name": "psu_temp1_input", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Temp_PSU2_AMB", - "field_pos": "3", - "mult": "1000" - }, - { - "attr_name": "psu_fan1_speed_rpm", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Fan_PSU2", - "field_pos": "3" - }, - { - "attr_name": "psu_mfr_id", - "bmc_cmd": "ipmitool fru print 2 | tr -s ' ' | cut -d' ' -f3-5", - "raw": "0", - "field_name": "Manufacturer", - "field_pos": "3", - "delimiter": ":" - }, - { - "attr_name": "psu_model_name", - "bmc_cmd": "ipmitool fru print 2 | tr -s ' ' | cut -d' ' -f3-5", - "raw": "0", - "field_name": "Name", - "field_pos": "3", - "delimiter": ":" - }, - { - "attr_name": "psu_serial_num", - "bmc_cmd": "ipmitool fru print 2 | tr -s ' ' | cut -d' ' -f3-5", - "raw": "0", - "field_name": "Serial", - "field_pos": "3", - "delimiter": ":" - }, - { - "attr_name": "psu_v_out", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "VOUT_PSU2", - "field_pos": "3", - "mult": "1000" - }, - { - "attr_name": "psu_i_out", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "IOUT_PSU2", - "field_pos": "3", - "mult": "1000" - } - ] - } - } - }, - "FAN-CTRL": { - "dev_info": { - "device_type": "FAN", - "device_name": "FAN-CTRL", - "device_parent": "" - }, - "bmc": { - "ipmitool": { - "attr_list": [ - { - "attr_name": "fan1_present", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Fan1_PRSNT", - "field_pos": "7" - }, - { - "attr_name": "fan2_present", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Fan2_PRSNT", - "field_pos": "7" - }, - { - "attr_name": "fan3_present", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Fan3_PRSNT", - "field_pos": "7" - }, - { - "attr_name": "fan4_present", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "Fan4_PRSNT", - "field_pos": "7" - }, - { - "attr_name": "fan1_f_speed_rpm", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "FAN_1_F", - "field_pos": "3" - }, - { - "attr_name": "fan1_r_speed_rpm", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "FAN_1_R", - "field_pos": "3" - }, - { - "attr_name": "fan2_f_speed_rpm", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "FAN_2_F", - "field_pos": "3" - }, - { - "attr_name": "fan2_r_speed_rpm", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "FAN_2_R", - "field_pos": "3" - }, - { - "attr_name": "fan3_f_speed_rpm", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "FAN_3_F", - "field_pos": "3" - }, - { - "attr_name": "fan3_r_speed_rpm", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "FAN_3_R", - "field_pos": "3" - }, - { - "attr_name": "fan4_f_speed_rpm", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "FAN_4_F", - "field_pos": "3" - }, - { - "attr_name": "fan4_r_speed_rpm", - "bmc_cmd": "ipmitool sensor", - "raw": "0", - "field_name": "FAN_4_R", - "field_pos": "3" - } - ] - } - } - }, - "PORT1": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT1", - "device_parent": "MUX2" - }, - "dev_attr": { - "dev_idx": "1" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT1-EEPROM" - }, - { - "itf": "control", - "dev": "PORT1-CTRL" - } - ] - } - }, - "PORT1-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT1-EEPROM", - "device_parent": "MUX2", - "virt_parent": "PORT1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0a", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT1-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT1-CTRL", - "device_parent": "MUX2", - "virt_parent": "PORT1" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0a", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0x1", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0x1", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0x1", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0x1", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT2": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT2", - "device_parent": "MUX2" - }, - "dev_attr": { - "dev_idx": "2" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT2-EEPROM" - }, - { - "itf": "control", - "dev": "PORT2-CTRL" - } - ] - } - }, - "PORT2-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT2-EEPROM", - "device_parent": "MUX2", - "virt_parent": "PORT2" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x09", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT2-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT2-CTRL", - "device_parent": "MUX2", - "virt_parent": "PORT2" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x09", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0x0", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0x0", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0x0", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0x0", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT3": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT3", - "device_parent": "MUX2" - }, - "dev_attr": { - "dev_idx": "3" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT3-EEPROM" - }, - { - "itf": "control", - "dev": "PORT3-CTRL" - } - ] - } - }, - "PORT3-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT3-EEPROM", - "device_parent": "MUX2", - "virt_parent": "PORT3" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0c", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT3-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT3-CTRL", - "device_parent": "MUX2", - "virt_parent": "PORT3" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0c", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0x3", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0x3", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0x3", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0x3", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT4": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT4", - "device_parent": "MUX2" - }, - "dev_attr": { - "dev_idx": "4" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT4-EEPROM" - }, - { - "itf": "control", - "dev": "PORT4-CTRL" - } - ] - } - }, - "PORT4-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT4-EEPROM", - "device_parent": "MUX2", - "virt_parent": "PORT4" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0b", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT4-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT4-CTRL", - "device_parent": "MUX2", - "virt_parent": "PORT4" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0b", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0x2", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0x2", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0x2", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0x2", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT5": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT5", - "device_parent": "MUX2" - }, - "dev_attr": { - "dev_idx": "5" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT5-EEPROM" - }, - { - "itf": "control", - "dev": "PORT5-CTRL" - } - ] - } - }, - "PORT5-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT5-EEPROM", - "device_parent": "MUX2", - "virt_parent": "PORT5" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0e", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT5-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT5-CTRL", - "device_parent": "MUX2", - "virt_parent": "PORT5" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0e", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0x5", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0x5", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0x5", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0x5", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT6": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT6", - "device_parent": "MUX2" - }, - "dev_attr": { - "dev_idx": "6" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT6-EEPROM" - }, - { - "itf": "control", - "dev": "PORT6-CTRL" - } - ] - } - }, - "PORT6-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT6-EEPROM", - "device_parent": "MUX2", - "virt_parent": "PORT6" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0d", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT6-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT6-CTRL", - "device_parent": "MUX2", - "virt_parent": "PORT6" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0d", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0x4", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0x4", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0x4", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0x4", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT7": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT7", - "device_parent": "MUX2" - }, - "dev_attr": { - "dev_idx": "7" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT7-EEPROM" - }, - { - "itf": "control", - "dev": "PORT7-CTRL" - } - ] - } - }, - "PORT7-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT7-EEPROM", - "device_parent": "MUX2", - "virt_parent": "PORT7" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x10", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT7-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT7-CTRL", - "device_parent": "MUX2", - "virt_parent": "PORT7" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x10", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0x7", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0x7", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0x7", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0x7", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT8": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT8", - "device_parent": "MUX2" - }, - "dev_attr": { - "dev_idx": "8" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT8-EEPROM" - }, - { - "itf": "control", - "dev": "PORT8-CTRL" - } - ] - } - }, - "PORT8-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT8-EEPROM", - "device_parent": "MUX2", - "virt_parent": "PORT8" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0f", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT8-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT8-CTRL", - "device_parent": "MUX2", - "virt_parent": "PORT8" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x0f", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0x6", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0x6", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0x6", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0x6", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT9": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT9", - "device_parent": "MUX3" - }, - "dev_attr": { - "dev_idx": "9" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT9-EEPROM" - }, - { - "itf": "control", - "dev": "PORT9-CTRL" - } - ] - } - }, - "PORT9-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT9-EEPROM", - "device_parent": "MUX3", - "virt_parent": "PORT9" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x12", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT9-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT9-CTRL", - "device_parent": "MUX3", - "virt_parent": "PORT9" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x12", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0x9", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0x9", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0x9", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0x9", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT10": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT10", - "device_parent": "MUX3" - }, - "dev_attr": { - "dev_idx": "10" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT10-EEPROM" - }, - { - "itf": "control", - "dev": "PORT10-CTRL" - } - ] - } - }, - "PORT10-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT10-EEPROM", - "device_parent": "MUX3", - "virt_parent": "PORT10" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x11", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT10-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT10-CTRL", - "device_parent": "MUX3", - "virt_parent": "PORT10" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x11", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0x8", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0x8", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0x8", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0x8", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT11": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT11", - "device_parent": "MUX3" - }, - "dev_attr": { - "dev_idx": "11" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT11-EEPROM" - }, - { - "itf": "control", - "dev": "PORT11-CTRL" - } - ] - } - }, - "PORT11-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT11-EEPROM", - "device_parent": "MUX3", - "virt_parent": "PORT11" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x14", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT11-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT11-CTRL", - "device_parent": "MUX3", - "virt_parent": "PORT11" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x14", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0xb", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0xb", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0xb", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0xb", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT12": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT12", - "device_parent": "MUX3" - }, - "dev_attr": { - "dev_idx": "12" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT12-EEPROM" - }, - { - "itf": "control", - "dev": "PORT12-CTRL" - } - ] - } - }, - "PORT12-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT12-EEPROM", - "device_parent": "MUX3", - "virt_parent": "PORT12" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x13", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT12-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT12-CTRL", - "device_parent": "MUX3", - "virt_parent": "PORT12" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x13", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0xa", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0xa", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0xa", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0xa", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT13": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT13", - "device_parent": "MUX3" - }, - "dev_attr": { - "dev_idx": "13" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT13-EEPROM" - }, - { - "itf": "control", - "dev": "PORT13-CTRL" - } - ] - } - }, - "PORT13-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT13-EEPROM", - "device_parent": "MUX3", - "virt_parent": "PORT13" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x16", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT13-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT13-CTRL", - "device_parent": "MUX3", - "virt_parent": "PORT13" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x16", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0xd", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0xd", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0xd", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0xd", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT14": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT14", - "device_parent": "MUX3" - }, - "dev_attr": { - "dev_idx": "14" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT14-EEPROM" - }, - { - "itf": "control", - "dev": "PORT14-CTRL" - } - ] - } - }, - "PORT14-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT14-EEPROM", - "device_parent": "MUX3", - "virt_parent": "PORT14" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x15", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT14-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT14-CTRL", - "device_parent": "MUX3", - "virt_parent": "PORT14" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x15", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0xc", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0xc", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0xc", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0xc", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT15": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT15", - "device_parent": "MUX3" - }, - "dev_attr": { - "dev_idx": "15" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT15-EEPROM" - }, - { - "itf": "control", - "dev": "PORT15-CTRL" - } - ] - } - }, - "PORT15-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT15-EEPROM", - "device_parent": "MUX3", - "virt_parent": "PORT15" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x18", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT15-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT15-CTRL", - "device_parent": "MUX3", - "virt_parent": "PORT15" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x18", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0xf", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0xf", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0xf", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0xf", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT16": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT16", - "device_parent": "MUX3" - }, - "dev_attr": { - "dev_idx": "16" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT16-EEPROM" - }, - { - "itf": "control", - "dev": "PORT16-CTRL" - } - ] - } - }, - "PORT16-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT16-EEPROM", - "device_parent": "MUX3", - "virt_parent": "PORT16" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x17", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT16-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT16-CTRL", - "device_parent": "MUX3", - "virt_parent": "PORT16" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x17", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x22", - "attr_devname": "GPIO3", - "attr_devtype": "gpio", - "attr_offset": "0xe", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x20", - "attr_devname": "GPIO1", - "attr_devtype": "gpio", - "attr_offset": "0xe", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x22", - "attr_devname": "GPIO8", - "attr_devtype": "gpio", - "attr_offset": "0xe", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x20", - "attr_devname": "GPIO6", - "attr_devtype": "gpio", - "attr_offset": "0xe", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT17": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT17", - "device_parent": "MUX4" - }, - "dev_attr": { - "dev_idx": "17" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT17-EEPROM" - }, - { - "itf": "control", - "dev": "PORT17-CTRL" - } - ] - } - }, - "PORT17-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT17-EEPROM", - "device_parent": "MUX4", - "virt_parent": "PORT17" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1a", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT17-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT17-CTRL", - "device_parent": "MUX4", - "virt_parent": "PORT17" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1a", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0x1", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0x1", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0x1", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0x1", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT18": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT18", - "device_parent": "MUX4" - }, - "dev_attr": { - "dev_idx": "18" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT18-EEPROM" - }, - { - "itf": "control", - "dev": "PORT18-CTRL" - } - ] - } - }, - "PORT18-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT18-EEPROM", - "device_parent": "MUX4", - "virt_parent": "PORT18" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x19", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT18-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT18-CTRL", - "device_parent": "MUX4", - "virt_parent": "PORT18" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x19", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0x0", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0x0", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0x0", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0x0", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT19": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT19", - "device_parent": "MUX4" - }, - "dev_attr": { - "dev_idx": "19" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT19-EEPROM" - }, - { - "itf": "control", - "dev": "PORT19-CTRL" - } - ] - } - }, - "PORT19-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT19-EEPROM", - "device_parent": "MUX4", - "virt_parent": "PORT19" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1c", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT19-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT19-CTRL", - "device_parent": "MUX4", - "virt_parent": "PORT19" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1c", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0x3", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0x3", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0x3", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0x3", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT20": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT20", - "device_parent": "MUX4" - }, - "dev_attr": { - "dev_idx": "20" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT20-EEPROM" - }, - { - "itf": "control", - "dev": "PORT20-CTRL" - } - ] - } - }, - "PORT20-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT20-EEPROM", - "device_parent": "MUX4", - "virt_parent": "PORT20" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1b", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT20-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT20-CTRL", - "device_parent": "MUX4", - "virt_parent": "PORT20" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1b", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0x2", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0x2", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0x2", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0x2", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT21": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT21", - "device_parent": "MUX4" - }, - "dev_attr": { - "dev_idx": "21" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT21-EEPROM" - }, - { - "itf": "control", - "dev": "PORT21-CTRL" - } - ] - } - }, - "PORT21-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT21-EEPROM", - "device_parent": "MUX4", - "virt_parent": "PORT21" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1e", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT21-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT21-CTRL", - "device_parent": "MUX4", - "virt_parent": "PORT21" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1e", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0x5", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0x5", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0x5", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0x5", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT22": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT22", - "device_parent": "MUX4" - }, - "dev_attr": { - "dev_idx": "22" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT22-EEPROM" - }, - { - "itf": "control", - "dev": "PORT22-CTRL" - } - ] - } - }, - "PORT22-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT22-EEPROM", - "device_parent": "MUX4", - "virt_parent": "PORT22" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1d", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT22-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT22-CTRL", - "device_parent": "MUX4", - "virt_parent": "PORT22" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1d", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0x4", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0x4", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0x4", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0x4", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT23": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT23", - "device_parent": "MUX4" - }, - "dev_attr": { - "dev_idx": "23" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT23-EEPROM" - }, - { - "itf": "control", - "dev": "PORT23-CTRL" - } - ] - } - }, - "PORT23-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT23-EEPROM", - "device_parent": "MUX4", - "virt_parent": "PORT23" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x20", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT23-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT23-CTRL", - "device_parent": "MUX4", - "virt_parent": "PORT23" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x20", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0x7", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0x7", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0x7", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0x7", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT24": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT24", - "device_parent": "MUX4" - }, - "dev_attr": { - "dev_idx": "24" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT24-EEPROM" - }, - { - "itf": "control", - "dev": "PORT24-CTRL" - } - ] - } - }, - "PORT24-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT24-EEPROM", - "device_parent": "MUX4", - "virt_parent": "PORT24" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1f", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT24-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT24-CTRL", - "device_parent": "MUX4", - "virt_parent": "PORT24" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x1f", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0x6", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0x6", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0x6", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0x6", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT25": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT25", - "device_parent": "MUX5" - }, - "dev_attr": { - "dev_idx": "25" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT25-EEPROM" - }, - { - "itf": "control", - "dev": "PORT25-CTRL" - } - ] - } - }, - "PORT25-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT25-EEPROM", - "device_parent": "MUX5", - "virt_parent": "PORT25" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x22", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT25-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT25-CTRL", - "device_parent": "MUX5", - "virt_parent": "PORT25" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x22", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0x9", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0x9", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0x9", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0x9", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT26": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT26", - "device_parent": "MUX5" - }, - "dev_attr": { - "dev_idx": "26" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT26-EEPROM" - }, - { - "itf": "control", - "dev": "PORT26-CTRL" - } - ] - } - }, - "PORT26-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT26-EEPROM", - "device_parent": "MUX5", - "virt_parent": "PORT26" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x21", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT26-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT26-CTRL", - "device_parent": "MUX5", - "virt_parent": "PORT26" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x21", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0x8", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0x8", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0x8", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0x8", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT27": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT27", - "device_parent": "MUX5" - }, - "dev_attr": { - "dev_idx": "27" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT27-EEPROM" - }, - { - "itf": "control", - "dev": "PORT27-CTRL" - } - ] - } - }, - "PORT27-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT27-EEPROM", - "device_parent": "MUX5", - "virt_parent": "PORT27" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x24", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT27-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT27-CTRL", - "device_parent": "MUX5", - "virt_parent": "PORT27" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x24", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0xb", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0xb", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0xb", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0xb", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT28": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT28", - "device_parent": "MUX5" - }, - "dev_attr": { - "dev_idx": "28" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT28-EEPROM" - }, - { - "itf": "control", - "dev": "PORT28-CTRL" - } - ] - } - }, - "PORT28-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT28-EEPROM", - "device_parent": "MUX5", - "virt_parent": "PORT28" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x23", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT28-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT28-CTRL", - "device_parent": "MUX5", - "virt_parent": "PORT28" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x23", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0xa", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0xa", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0xa", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0xa", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT29": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT29", - "device_parent": "MUX5" - }, - "dev_attr": { - "dev_idx": "29" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT29-EEPROM" - }, - { - "itf": "control", - "dev": "PORT29-CTRL" - } - ] - } - }, - "PORT29-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT29-EEPROM", - "device_parent": "MUX5", - "virt_parent": "PORT29" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x26", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT29-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT29-CTRL", - "device_parent": "MUX5", - "virt_parent": "PORT29" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x26", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0xd", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0xd", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0xd", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0xd", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT30": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT30", - "device_parent": "MUX5" - }, - "dev_attr": { - "dev_idx": "30" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT30-EEPROM" - }, - { - "itf": "control", - "dev": "PORT30-CTRL" - } - ] - } - }, - "PORT30-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT30-EEPROM", - "device_parent": "MUX5", - "virt_parent": "PORT30" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x25", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT30-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT30-CTRL", - "device_parent": "MUX5", - "virt_parent": "PORT30" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x25", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0xc", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0xc", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0xc", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0xc", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT31": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT31", - "device_parent": "MUX5" - }, - "dev_attr": { - "dev_idx": "31" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT31-EEPROM" - }, - { - "itf": "control", - "dev": "PORT31-CTRL" - } - ] - } - }, - "PORT31-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT31-EEPROM", - "device_parent": "MUX5", - "virt_parent": "PORT31" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x28", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT31-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT31-CTRL", - "device_parent": "MUX5", - "virt_parent": "PORT31" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x28", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0xf", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0xf", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0xf", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0xf", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT32": { - "dev_info": { - "device_type": "QSFP", - "device_name": "PORT32", - "device_parent": "MUX5" - }, - "dev_attr": { - "dev_idx": "32" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT32-EEPROM" - }, - { - "itf": "control", - "dev": "PORT32-CTRL" - } - ] - } - }, - "PORT32-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT32-EEPROM", - "device_parent": "MUX5", - "virt_parent": "PORT32" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x27", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT32-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT32-CTRL", - "device_parent": "MUX5", - "virt_parent": "PORT32" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x27", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_intr_status", - "attr_devaddr": "0x23", - "attr_devname": "GPIO4", - "attr_devtype": "gpio", - "attr_offset": "0xe", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x21", - "attr_devname": "GPIO2", - "attr_devtype": "gpio", - "attr_offset": "0xe", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_reset", - "attr_devaddr": "0x23", - "attr_devname": "GPIO9", - "attr_devtype": "gpio", - "attr_offset": "0xe", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_lpmode", - "attr_devaddr": "0x21", - "attr_devname": "GPIO7", - "attr_devtype": "gpio", - "attr_offset": "0xe", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - - "PORT33": { - "dev_info": { - "device_type": "SFP", - "device_name": "PORT33", - "device_parent": "MUX6" - }, - "dev_attr": { - "dev_idx": "33" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT33-EEPROM" - }, - { - "itf": "control", - "dev": "PORT33-CTRL" - } - ] - } - }, - "PORT33-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT33", - "device_parent": "MUX6", - "virt_parent": "PORT33" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x2d", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT33-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT33-CTRL", - "device_parent": "MUX6", - "virt_parent": "PORT33" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x2d", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x27", - "attr_devname": "GPIO5", - "attr_devtype": "gpio", - "attr_offset": "0x0", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_rxlos", - "attr_devaddr": "0x27", - "attr_devname": "GPIO5", - "attr_devtype": "gpio", - "attr_offset": "0x6", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_txfault", - "attr_devaddr": "0x27", - "attr_devname": "GPIO5", - "attr_devtype": "gpio", - "attr_offset": "0x2", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_txdisable", - "attr_devaddr": "0x27", - "attr_devname": "GPIO5", - "attr_devtype": "gpio", - "attr_offset": "0x4", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - }, - "PORT34": { - "dev_info": { - "device_type": "SFP", - "device_name": "PORT34", - "device_parent": "MUX6" - }, - "dev_attr": { - "dev_idx": "34" - }, - "i2c": { - "interface": [ - { - "itf": "eeprom", - "dev": "PORT34-EEPROM" - }, - { - "itf": "control", - "dev": "PORT34-CTRL" - } - ] - } - }, - "PORT34-EEPROM": { - "dev_info": { - "device_type": "", - "device_name": "PORT34", - "device_parent": "MUX6", - "virt_parent": "PORT34" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x2e", - "dev_addr": "0x50", - "dev_type": "optoe1" - }, - "attr_list": [ - { - "attr_name": "eeprom" - } - ] - } - }, - "PORT34-CTRL": { - "dev_info": { - "device_type": "", - "device_name": "PORT34-CTRL", - "device_parent": "MUX6", - "virt_parent": "PORT34" - }, - "i2c": { - "topo_info": { - "parent_bus": "0x2e", - "dev_addr": "0x53", - "dev_type": "pddf_xcvr" - }, - "attr_list": [ - { - "attr_name": "xcvr_present", - "attr_devaddr": "0x27", - "attr_devname": "GPIO5", - "attr_devtype": "gpio", - "attr_offset": "0x1", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_rxlos", - "attr_devaddr": "0x27", - "attr_devname": "GPIO5", - "attr_devtype": "gpio", - "attr_offset": "0x7", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_txfault", - "attr_devaddr": "0x27", - "attr_devname": "GPIO5", - "attr_devtype": "gpio", - "attr_offset": "0x3", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - }, - { - "attr_name": "xcvr_txdisable", - "attr_devaddr": "0x27", - "attr_devname": "GPIO5", - "attr_devtype": "gpio", - "attr_offset": "0x5", - "attr_mask": "", - "attr_cmpval": "", - "attr_len": "" - } - ] - } - } -} diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf_support b/device/ufispace/x86_64-ufispace_s9180_32x-r0/pddf_support deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/platform.json b/device/ufispace/x86_64-ufispace_s9180_32x-r0/platform.json deleted file mode 100644 index b21674f59f..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/platform.json +++ /dev/null @@ -1,547 +0,0 @@ -{ - "chassis": { - "name": "S9180-32X", - "components": [ - { - "name": "CPLD1" - }, - { - "name": "BIOS" - }, - { - "name": "BMC" - } - ], - "fans": [ - { - "name": "Fantray1_1" - }, - { - "name": "Fantray1_2" - }, - { - "name": "Fantray2_1" - }, - { - "name": "Fantray2_2" - }, - { - "name": "Fantray3_1" - }, - { - "name": "Fantray3_2" - }, - { - "name": "Fantray4_1" - }, - { - "name": "Fantray4_2" - } - ], - "fan_drawers":[ - { - "name": "Fantray1", - "num_fans" : 2, - "fans": [ - { - "name": "Fantray1_1" - }, - { - "name": "Fantray1_2" - } - ] - }, - { - "name": "Fantray2", - "num_fans" : 2, - "fans": [ - { - "name": "Fantray2_1" - }, - { - "name": "Fantray2_2" - } - ] - }, - { - "name": "Fantray3", - "num_fans" : 2, - "fans": [ - { - "name": "Fantray3_1" - }, - { - "name": "Fantray3_2" - } - ] - }, - { - "name": "Fantray4", - "num_fans" : 2, - "fans": [ - { - "name": "Fantray4_1" - }, - { - "name": "Fantray4_2" - } - ] - } - ], - "psus": [ - { - "name": "PSU1", - "fans": [ - { - "name": "PSU1_FAN1" - } - ], - "thermals": [ - { - "name": "PSU1_TEMP1" - } - ] - }, - { - "name": "PSU2", - "fans": [ - { - "name": "PSU2_FAN1" - } - ], - "thermals": [ - { - "name": "PSU2_TEMP1" - } - ] - } - ], - "thermals": [ - { - "name": "Temp_CPU_BOARD" - }, - { - "name": "Temp_BMC" - }, - { - "name": "Temp_MAC" - }, - { - "name": "Temp_MAC_Front" - }, - { - "name": "Temp_MAC_Rear" - } - ], - "sfps": [ - { - "name": "Ethernet0" - }, - { - "name": "Ethernet4" - }, - { - "name": "Ethernet8" - }, - { - "name": "Ethernet12" - }, - { - "name": "Ethernet16" - }, - { - "name": "Ethernet20" - }, - { - "name": "Ethernet24" - }, - { - "name": "Ethernet28" - }, - { - "name": "Ethernet32" - }, - { - "name": "Ethernet36" - }, - { - "name": "Ethernet40" - }, - { - "name": "Ethernet44" - }, - { - "name": "Ethernet48" - }, - { - "name": "Ethernet52" - }, - { - "name": "Ethernet56" - }, - { - "name": "Ethernet60" - }, - { - "name": "Ethernet64" - }, - { - "name": "Ethernet68" - }, - { - "name": "Ethernet72" - }, - { - "name": "Ethernet76" - }, - { - "name": "Ethernet80" - }, - { - "name": "Ethernet84" - }, - { - "name": "Ethernet88" - }, - { - "name": "Ethernet92" - }, - { - "name": "Ethernet96" - }, - { - "name": "Ethernet100" - }, - { - "name": "Ethernet104" - }, - { - "name": "Ethernet108" - }, - { - "name": "Ethernet112" - }, - { - "name": "Ethernet116" - }, - { - "name": "Ethernet120" - }, - { - "name": "Ethernet124" - }, - { - "name": "Ethernet128" - }, - { - "name": "Ethernet129" - } - ] - }, - "interfaces": { - "Ethernet0": { - "index": "0,0,0,0", - "lanes": "1,2,3,4", - "breakout_modes": { - "1x100G": ["Eth0(Port0)"], - "4x25G": ["Eth0/1(Port0)", "Eth0/2(Port0)", "Eth0/3(Port0)", "Eth0/4(Port0)"] - } - }, - - "Ethernet4": { - "index": "1,1,1,1", - "lanes": "5,6,7,8", - "breakout_modes": { - "1x100G": ["Eth1(Port1)"], - "4x25G": ["Eth1/1(Port1)", "Eth1/2(Port1)", "Eth1/3(Port1)", "Eth1/4(Port1)"] - } - }, - - "Ethernet8": { - "index": "2,2,2,2", - "lanes": "9,10,11,12", - "breakout_modes": { - "1x100G": ["Eth2(Port2)"], - "4x25G": ["Eth2/1(Port2)", "Eth2/2(Port2)", "Eth2/3(Port2)", "Eth2/4(Port2)"] - } - }, - - "Ethernet12": { - "index": "3,3,3,3", - "lanes": "13,14,15,16", - "breakout_modes": { - "1x100G": ["Eth3(Port3)"], - "4x25G": ["Eth3/1(Port3)", "Eth3/2(Port3)", "Eth3/3(Port3)", "Eth3/4(Port3)"] - } - }, - - "Ethernet16": { - "index": "4,4,4,4", - "lanes": "17,18,19,20", - "breakout_modes": { - "1x100G": ["Eth4(Port4)"], - "4x25G": ["Eth4/1(Port4)", "Eth4/2(Port4)", "Eth4/3(Port4)", "Eth4/4(Port4)"] - } - }, - - "Ethernet20": { - "index": "5,5,5,5", - "lanes": ",21,22,23,24", - "breakout_modes": { - "1x100G": ["Eth5(Port5)"], - "4x25G": ["Eth5/1(Port5)", "Eth5/2(Port5)", "Eth5/3(Port5)", "Eth5/4(Port5)"] - } - }, - - "Ethernet24": { - "index": "6,6,6,6", - "lanes": "25,26,27,28", - "breakout_modes": { - "1x100G": ["Eth6(Port6)"], - "4x25G": ["Eth6/1(Port6)", "Eth6/2(Port6)", "Eth6/3(Port6)", "Eth6/4(Port6)"] - } - }, - - "Ethernet28": { - "index": "7,7,7,7", - "lanes": "29,30,31,32", - "breakout_modes": { - "1x100G": ["Eth7(Port7)"], - "4x25G": ["Eth7/1(Port7)", "Eth7/2(Port7)", "Eth7/3(Port7)", "Eth7/4(Port7)"] - } - }, - - "Ethernet32": { - "index": "8,8,8,8", - "lanes": "33,34,35,36", - "breakout_modes": { - "1x100G": ["Eth8(Port8)"], - "4x25G": ["Eth8/1(Port8)", "Eth8/2(Port8)", "Eth8/3(Port8)", "Eth8/4(Port8)"] - } - }, - - "Ethernet36": { - "index": "9,9,9,9", - "lanes": "37,38,39,40", - "breakout_modes": { - "1x100G": ["Eth9(Port9)"], - "4x25G": ["Eth9/1(Port9)", "Eth9/2(Port9)", "Eth9/3(Port9)", "Eth9/4(Port9)"] - } - }, - - "Ethernet40": { - "index": "10,10,10,10", - "lanes": "41,42,43,44", - "breakout_modes": { - "1x100G": ["Eth10(Port10)"], - "4x25G": ["Eth10/1(Port10)", "Eth10/2(Port10)", "Eth10/3(Port10)", "Eth10/4(Port10)"] - } - }, - - "Ethernet44": { - "index": "11,11,11,11", - "lanes": "45,46,47,48", - "breakout_modes": { - "1x100G": ["Eth11(Port11)"], - "4x25G": ["Eth11/1(Port11)", "Eth11/2(Port11)", "Eth11/3(Port11)", "Eth11/4(Port11)"] - } - }, - - "Ethernet48": { - "index": "12,12,12,12", - "lanes": "49,50,51,52", - "breakout_modes": { - "1x100G": ["Eth12(Port12)"], - "4x25G": ["Eth12/1(Port12)", "Eth12/2(Port12)", "Eth12/3(Port12)", "Eth12/4(Port12)"] - } - }, - - "Ethernet52": { - "index": "13,13,13,13", - "lanes": "53,54,55,56", - "breakout_modes": { - "1x100G": ["Eth13(Port13)"], - "4x25G": ["Eth13/1(Port13)", "Eth13/2(Port13)", "Eth13/3(Port13)", "Eth13/4(Port13)"] - } - }, - - "Ethernet56": { - "index": "14,14,14,14", - "lanes": "57,58,59,60", - "breakout_modes": { - "1x100G": ["Eth14(Port14)"], - "4x25G": ["Eth14/1(Port14)", "Eth14/2(Port14)", "Eth14/3(Port14)", "Eth14/4(Port14)"] - } - }, - - "Ethernet60": { - "index": "15,15,15,15", - "lanes": "61,62,63,64", - "breakout_modes": { - "1x100G": ["Eth15(Port15)"], - "4x25G": ["Eth15/1(Port15)", "Eth15/2(Port15)", "Eth15/3(Port15)", "Eth15/4(Port15)"] - } - }, - - "Ethernet64": { - "index": "16,16,16,16", - "lanes": "65,66,67,68", - "breakout_modes": { - "1x100G": ["Eth16(Port16)"], - "4x25G": ["Eth16/1(Port16)", "Eth16/2(Port16)", "Eth16/3(Port16)", "Eth16/4(Port16)"] - } - }, - - "Ethernet68": { - "index": "17,17,17,17", - "lanes": "69,70,71,72", - "breakout_modes": { - "1x100G": ["Eth17(Port17)"], - "4x25G": ["Eth17/1(Port17)", "Eth17/2(Port17)", "Eth17/3(Port17)", "Eth17/4(Port17)"] - } - }, - - "Ethernet72": { - "index": "18,18,18,18", - "lanes": "73,74,75,76", - "breakout_modes": { - "1x100G": ["Eth18(Port18)"], - "4x25G": ["Eth18/1(Port18)", "Eth18/2(Port18)", "Eth18/3(Port18)", "Eth18/4(Port18)"] - } - }, - - "Ethernet76": { - "index": "19,19,19,19", - "lanes": "77,78,79,80", - "breakout_modes": { - "1x100G": ["Eth19(Port19)"], - "4x25G": ["Eth19/1(Port19)", "Eth19/2(Port19)", "Eth19/3(Port19)", "Eth19/4(Port19)"] - } - }, - - "Ethernet80": { - "index": "20,20,20,20", - "lanes": "81,82,83,84", - "breakout_modes": { - "1x100G": ["Eth20(Port20)"], - "4x25G": ["Eth20/1(Port20)", "Eth20/2(Port20)", "Eth20/3(Port20)", "Eth20/4(Port20)"] - } - }, - - "Ethernet84": { - "index": "21,21,21,21", - "lanes": "85,86,87,88", - "breakout_modes": { - "1x100G": ["Eth21(Port21)"], - "4x25G": ["Eth21/1(Port21)", "Eth21/2(Port21)", "Eth21/3(Port21)", "Eth21/4(Port21)"] - } - }, - - "Ethernet88": { - "index": "22,22,22,22", - "lanes": "89,90,91,92", - "breakout_modes": { - "1x100G": ["Eth22(Port22)"], - "4x25G": ["Eth22/1(Port22)", "Eth22/2(Port22)", "Eth22/3(Port22)", "Eth22/4(Port22)"] - } - }, - - "Ethernet92": { - "index": "23,23,23,23", - "lanes": "93,94,95,96", - "breakout_modes": { - "1x100G": ["Eth23(Port23)"], - "4x25G": ["Eth23/1(Port23)", "Eth23/2(Port23)", "Eth23/3(Port23)", "Eth23/4(Port23)"] - } - }, - - "Ethernet96": { - "index": "24,24,24,24", - "lanes": "97,98,99,100", - "breakout_modes": { - "1x100G": ["Eth24(Port24)"], - "4x25G": ["Eth24/1(Port24)", "Eth24/2(Port24)", "Eth24/3(Port24)", "Eth24/4(Port24)"] - } - }, - - "Ethernet100": { - "index": "25,25,25,25", - "lanes": "101,102,103,104", - "breakout_modes": { - "1x100G": ["Eth25(Port25)"], - "4x25G": ["Eth25/1(Port25)", "Eth25/2(Port25)", "Eth25/3(Port25)", "Eth25/4(Port25)"] - } - }, - - "Ethernet104": { - "index": "26,26,26,26", - "lanes": "105,106,107,108", - "breakout_modes": { - "1x100G": ["Eth26(Port26)"], - "4x25G": ["Eth26/1(Port26)", "Eth26/2(Port26)", "Eth26/3(Port26)", "Eth26/4(Port26)"] - } - }, - - "Ethernet108": { - "index": "27,27,27,27", - "lanes": "109,110,111,112", - "breakout_modes": { - "1x100G": ["Eth27(Port27)"], - "4x25G": ["Eth27/1(Port27)", "Eth27/2(Port27)", "Eth27/3(Port27)", "Eth27/4(Port27)"] - } - }, - - "Ethernet112": { - "index": "28,28,28,28", - "lanes": "113,114,115,116", - "breakout_modes": { - "1x100G": ["Eth28(Port28)"], - "4x25G": ["Eth28/1(Port28)", "Eth28/2(Port28)", "Eth28/3(Port28)", "Eth28/4(Port28)"] - } - }, - - "Ethernet116": { - "index": "29,29,29,29", - "lanes": "117,118,119,120", - "breakout_modes": { - "1x100G": ["Eth29(Port29)"], - "4x25G": ["Eth29/1(Port29)", "Eth29/2(Port29)", "Eth29/3(Port29)", "Eth29/4(Port29)"] - } - }, - - "Ethernet120": { - "index": "30,30,30,30", - "lanes": "121,122,123,124", - "breakout_modes": { - "1x100G": ["Eth30(Port30)"], - "4x25G": ["Eth30/1(Port30)", "Eth30/2(Port30)", "Eth30/3(Port30)", "Eth30/4(Port30)"] - } - }, - - "Ethernet124": { - "index": "31,31,31,31", - "lanes": "125,126,127,128", - "breakout_modes": { - "1x100G": ["Eth31(Port31)"], - "4x25G": ["Eth31/1(Port31)", "Eth31/2(Port31)", "Eth31/3(Port31)", "Eth31/4(Port31)"] - } - }, - - "Ethernet128": { - "index": "32", - "lanes": "129", - "breakout_modes": { - "1x10G": ["Eth32(Port32)"] - } - }, - - "Ethernet129": { - "index": "33", - "lanes": "130", - "breakout_modes": { - "1x10G": ["Eth33(Port33)"] - } - } - } -} - diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/platform_asic b/device/ufispace/x86_64-ufispace_s9180_32x-r0/platform_asic deleted file mode 100644 index 88d8811792..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/platform_asic +++ /dev/null @@ -1 +0,0 @@ -barefoot diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/pmon_daemon_control.json b/device/ufispace/x86_64-ufispace_s9180_32x-r0/pmon_daemon_control.json deleted file mode 100644 index e348e0168f..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/pmon_daemon_control.json +++ /dev/null @@ -1,9 +0,0 @@ -{ - "skip_pcied": false, - "skip_fancontrol": false, - "skip_thermalctld": false, - "skip_ledd": true, - "skip_xcvrd": false, - "skip_psud": false, - "skip_syseepromd": false -} diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/sensors.conf b/device/ufispace/x86_64-ufispace_s9180_32x-r0/sensors.conf deleted file mode 100644 index 7a1c040881..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/sensors.conf +++ /dev/null @@ -1,9 +0,0 @@ -# libsensors configuration file - -bus "i2c-0" "I2C I801" -chip "tmp75-i2c-*-4f" - label temp1 "CPU Board Temp" - set temp1_max 70 - set temp1_max_hyst 75 - set temp1_crit 85 - diff --git a/device/ufispace/x86_64-ufispace_s9180_32x-r0/system_health_monitoring_config.json b/device/ufispace/x86_64-ufispace_s9180_32x-r0/system_health_monitoring_config.json deleted file mode 100644 index 6291e81a06..0000000000 --- a/device/ufispace/x86_64-ufispace_s9180_32x-r0/system_health_monitoring_config.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "services_to_ignore": [], - "devices_to_ignore": [ - "asic", - "psu", - "fan" - ], - "user_defined_checkers": [], - "polling_interval": 60, - "led_color": { - "fault": "yellow", - "normal": "green", - "booting": "blinking_green" - } -} \ No newline at end of file diff --git a/platform/barefoot/bfn-platform-ufispace.mk b/platform/barefoot/bfn-platform-ufispace.mk deleted file mode 100644 index fd3dced686..0000000000 --- a/platform/barefoot/bfn-platform-ufispace.mk +++ /dev/null @@ -1,5 +0,0 @@ -BFN_UFISPACE_PLATFORM = bfnplatform-ufispace_1.0.0_amd64.deb -$(BFN_UFISPACE_PLATFORM)_URL = "https://github.com/ufispace-dev/bf_sde_bsp/raw/master/sonic/9.12.0/$(BFN_UFISPACE_PLATFORM)" - -SONIC_ONLINE_DEBS += $(BFN_UFISPACE_PLATFORM) # $(BFN_SAI_DEV) -$(BFN_SAI_DEV)_DEPENDS += $(BFN_UFISPACE_PLATFORM) diff --git a/platform/barefoot/docker-saiserver-bfn.mk b/platform/barefoot/docker-saiserver-bfn.mk index 26abf7c53b..dde7e8888a 100644 --- a/platform/barefoot/docker-saiserver-bfn.mk +++ b/platform/barefoot/docker-saiserver-bfn.mk @@ -12,7 +12,7 @@ SONIC_COPY_FILES += $(SYNCD_INIT_COMMON_SCRIPT) $(DOCKER_SAISERVER_BFN)_DEPENDS += $(SAISERVER) # Install syncd for reuse the config fun #$(DOCKER_SAISERVER_BFN)_DEPENDS += $(SYNCD) -$(DOCKER_SAISERVER_BFN)_DEPENDS += $(BFN_SAI) $(BFN_INGRASYS_PLATFORM) $(BFN_UFISPACE_PLATFORM) $(BFN_PLATFORM) $(LIBTHRIFT_0_14_1) +$(DOCKER_SAISERVER_BFN)_DEPENDS += $(BFN_SAI) $(BFN_INGRASYS_PLATFORM) $(BFN_PLATFORM) $(LIBTHRIFT_0_14_1) $(DOCKER_SAISERVER_BFN)_FILES += $(SYNCD_INIT_COMMON_SCRIPT) # Same dependence as ENABLE_SYNCD_RPC @@ -20,7 +20,7 @@ $(DOCKER_SAISERVER_BFN)_DEPENDS += $(LIBSAITHRIFT_DEV) $(LIBTHRIFT_0_14_1_DEV) # Runtime dependency on sai is set only for syncd #$(SYNCD)_RDEPENDS += $(BFN_SAI) $(WNC_OSW1800_PLATFORM) $(BFN_INGRASYS_PLATFORM) $(BFN_PLATFORM) -$(DOCKER_SAISERVER_BFN)_RDEPENDS += $(BFN_SAI) $(BFN_INGRASYS_PLATFORM) $(BFN_UFISPACE_PLATFORM) $(BFN_PLATFORM) +$(DOCKER_SAISERVER_BFN)_RDEPENDS += $(BFN_SAI) $(BFN_INGRASYS_PLATFORM) $(BFN_PLATFORM) $(DOCKER_SAISERVER_BFN)_LOAD_DOCKERS += $(DOCKER_CONFIG_ENGINE_BULLSEYE) diff --git a/platform/barefoot/one-image.mk b/platform/barefoot/one-image.mk index b3257e8919..798a0d678a 100644 --- a/platform/barefoot/one-image.mk +++ b/platform/barefoot/one-image.mk @@ -5,18 +5,16 @@ $(SONIC_ONE_IMAGE)_MACHINE = barefoot $(SONIC_ONE_IMAGE)_IMAGE_TYPE = onie $(SONIC_ONE_IMAGE)_INSTALLS += $(BFN_MODULE) $(SONIC_ONE_IMAGE)_INSTALLS += $(SYSTEMD_SONIC_GENERATOR) -$(SONIC_ONE_IMAGE)_INSTALLS += $(PDDF_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(BFN_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(BFN_MONTARA_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(BFN_NEWPORT_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(BFN_NEWPORT_BF_PLATFORM_MODULE) -$(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(WNC_OSW1800_PLATFORM_MODULE) +$(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(WNC_OSW1800_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(INGRASYS_S9180_32X_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(INGRASYS_S9280_64X_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(BFN_MONTARA_QS_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(NETBERG_AURORA_610_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(NETBERG_AURORA_710_PLATFORM_MODULE) -$(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(UFISPACE_S9180_32X_PLATFORM_MODULE) ifeq ($(INSTALL_DEBUG_TOOLS),y) $(SONIC_ONE_IMAGE)_DOCKERS += $(SONIC_INSTALL_DOCKER_DBG_IMAGES) $(SONIC_ONE_IMAGE)_DOCKERS += $(filter-out $(patsubst %-$(DBG_IMAGE_MARK).gz,%.gz, $(SONIC_INSTALL_DOCKER_DBG_IMAGES)), $(SONIC_INSTALL_DOCKER_IMAGES)) diff --git a/platform/barefoot/platform-modules-ufispace.mk b/platform/barefoot/platform-modules-ufispace.mk deleted file mode 100644 index 9cdd5ca43a..0000000000 --- a/platform/barefoot/platform-modules-ufispace.mk +++ /dev/null @@ -1,14 +0,0 @@ -# Ufispace S9180-32X Platform modules - -UFISPACE_S9180_32X_PLATFORM_MODULE_VERSION = 1.1.0 - -export UFISPACE_S9180_32X_PLATFORM_MODULE_VERSION - -UFISPACE_S9180_32X_PLATFORM_MODULE = sonic-platform-ufispace-s9180-32x_$(UFISPACE_S9180_32X_PLATFORM_MODULE_VERSION)_amd64.deb -$(UFISPACE_S9180_32X_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-ufispace -$(UFISPACE_S9180_32X_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) -$(UFISPACE_S9180_32X_PLATFORM_MODULE)_PLATFORM = x86_64-ufispace_s9180_32x-r0 -SONIC_DPKG_DEBS += $(UFISPACE_S9180_32X_PLATFORM_MODULE) - -$(eval $(call add_extra_package,$(UFISPACE_S9180_32X_PLATFORM_MODULE))) - diff --git a/platform/barefoot/rules.mk b/platform/barefoot/rules.mk index 0a4339ce71..58f52f5ffd 100644 --- a/platform/barefoot/rules.mk +++ b/platform/barefoot/rules.mk @@ -6,7 +6,6 @@ include $(PLATFORM_PATH)/platform-modules-bfn-newport.mk include $(PLATFORM_PATH)/platform-modules-wnc-osw1800.mk include $(PLATFORM_PATH)/platform-modules-ingrasys.mk include $(PLATFORM_PATH)/platform-modules-netberg.mk -include $(PLATFORM_PATH)/platform-modules-ufispace.mk include $(PLATFORM_PATH)/bfn-sai.mk include $(PLATFORM_PATH)/docker-syncd-bfn.mk include $(PLATFORM_PATH)/docker-syncd-bfn-rpc.mk @@ -16,7 +15,6 @@ include $(PLATFORM_PATH)/libsaithrift-dev.mk include $(PLATFORM_PATH)/bfn-platform.mk #include $(PLATFORM_PATH)/bfn-platform-wnc.mk #include $(PLATFORM_PATH)/bfn-platform-ingrasys.mk -include $(PLATFORM_PATH)/bfn-platform-ufispace.mk include $(PLATFORM_PATH)/bfn-modules.mk include $(PLATFORM_PATH)/docker-saiserver-bfn.mk @@ -25,7 +23,7 @@ SONIC_ALL += $(SONIC_ONE_IMAGE) $(SONIC_ONE_ABOOT) \ # Inject sai into syncd #$(SYNCD)_DEPENDS += $(BFN_SAI) $(WNC_OSW1800_PLATFORM) $(BFN_INGRASYS_PLATFORM) $(BFN_PLATFORM) -$(SYNCD)_DEPENDS += $(BFN_SAI) $(BFN_INGRASYS_PLATFORM) $(BFN_UFISPACE_PLATFORM) $(BFN_PLATFORM) +$(SYNCD)_DEPENDS += $(BFN_SAI) $(BFN_INGRASYS_PLATFORM) $(BFN_PLATFORM) $(SYNCD)_UNINSTALLS += $(BFN_SAI) ifeq ($(ENABLE_SYNCD_RPC),y) @@ -35,6 +33,6 @@ endif # Runtime dependency on sai is set only for syncd #$(SYNCD)_RDEPENDS += $(BFN_SAI) $(WNC_OSW1800_PLATFORM) $(BFN_INGRASYS_PLATFORM) $(BFN_PLATFORM) -$(SYNCD)_RDEPENDS += $(BFN_SAI) $(BFN_INGRASYS_PLATFORM) $(BFN_UFISPACE_PLATFORM) $(BFN_PLATFORM) +$(SYNCD)_RDEPENDS += $(BFN_SAI) $(BFN_INGRASYS_PLATFORM) $(BFN_PLATFORM) export SONIC_BUFFER_MODEL=dynamic diff --git a/platform/barefoot/sonic-platform-modules-ufispace/LICENSE b/platform/barefoot/sonic-platform-modules-ufispace/LICENSE deleted file mode 100644 index 9cecc1d466..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/LICENSE +++ /dev/null @@ -1,674 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - {one line to give the program's name and a brief idea of what it does.} - Copyright (C) {year} {name of author} - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - {project} Copyright (C) {year} {fullname} - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -. diff --git a/platform/barefoot/sonic-platform-modules-ufispace/debian/changelog b/platform/barefoot/sonic-platform-modules-ufispace/debian/changelog deleted file mode 100644 index 0b4a98329e..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/debian/changelog +++ /dev/null @@ -1,5 +0,0 @@ -sonic-ufispace-platform-modules (1.1.0) unstable; urgency=low - - * Add support for S9180-32X. - - -- Ufispace Tue, 19 Apr 2022 17:10:58 +0800 diff --git a/platform/barefoot/sonic-platform-modules-ufispace/debian/compat b/platform/barefoot/sonic-platform-modules-ufispace/debian/compat deleted file mode 100644 index ec635144f6..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/debian/compat +++ /dev/null @@ -1 +0,0 @@ -9 diff --git a/platform/barefoot/sonic-platform-modules-ufispace/debian/control b/platform/barefoot/sonic-platform-modules-ufispace/debian/control deleted file mode 100644 index cc98343cf0..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/debian/control +++ /dev/null @@ -1,10 +0,0 @@ -Source: sonic-ufispace-platform-modules -Section: main -Priority: extra -Maintainer: Leo Lin , Jason Tsai -Build-Depends: debhelper (>= 9), bzip2 -Standards-Version: 1.0.0 - -Package: sonic-platform-ufispace-s9180-32x -Architecture: amd64 -Description: This package contains s9180-32x platform driver utility for SONiC project. diff --git a/platform/barefoot/sonic-platform-modules-ufispace/debian/rules b/platform/barefoot/sonic-platform-modules-ufispace/debian/rules deleted file mode 100755 index 552cc61f8f..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/debian/rules +++ /dev/null @@ -1,88 +0,0 @@ -#!/usr/bin/make -f -# -*- makefile -*- -# Sample debian/rules that uses debhelper. -# This file was originally written by Joey Hess and Craig Small. -# As a special exception, when this file is copied by dh-make into a -# dh-make output file, you may use that output file without restriction. -# This special exception was added by Craig Small in version 0.37 of dh-make. - -include /usr/share/dpkg/pkg-info.mk - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - -export INSTALL_MOD_DIR:=extra - -PYTHON3 ?= python3 - -PACKAGE_PRE_NAME := sonic-platform-ufispace -KVERSION ?= $(shell uname -r) -KERNEL_SRC := /lib/modules/$(KVERSION) -MOD_SRC_DIR:= $(shell pwd) -MODULE_DIRS:= s9180-32x -MODULE_DIR := modules -UTILS_DIR := utils -SERVICE_DIR := service -CONF_DIR := conf - -%: - dh $@ --with systemd,python3 --buildsystem=pybuild - -clean: - dh_testdir - dh_testroot - dh_clean - (for mod in $(MODULE_DIRS); do \ - make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules clean; \ - done) - - - -build: - (for mod in $(MODULE_DIRS); do \ - make modules -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ - cd -; \ - cd $(MOD_SRC_DIR)/$${mod}; \ - if [ -f sonic_platform_setup.py ]; then \ - $(PYTHON3) sonic_platform_setup.py bdist_wheel -d $(MOD_SRC_DIR)/$${mod}; \ - echo "Finished makig whl package for $$mod"; \ - fi; \ - cd -; \ - done) - -binary: binary-arch binary-indep - -binary-arch: - -binary-indep: - dh_testdir - dh_installdirs - (for mod in $(MODULE_DIRS); do \ - dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ - cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ - dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} usr/local/bin; \ - cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/* debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/local/bin; \ - dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} lib/systemd/system; \ - cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system; \ - cd $(MOD_SRC_DIR)/$${mod}; \ - cd -; \ - done) - - # Resuming debhelper scripts - dh_testroot - dh_install - dh_installchangelogs - dh_installdocs - dh_systemd_enable - dh_installinit - dh_systemd_start - dh_link - dh_fixperms - dh_compress - dh_strip - dh_installdeb - dh_gencontrol - dh_md5sums - dh_builddeb - -.PHONY: build binary binary-arch binary-indep clean diff --git a/platform/barefoot/sonic-platform-modules-ufispace/debian/sonic-platform-ufispace-s9180-32x.install b/platform/barefoot/sonic-platform-modules-ufispace/debian/sonic-platform-ufispace-s9180-32x.install deleted file mode 100644 index b6968a0a3a..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/debian/sonic-platform-ufispace-s9180-32x.install +++ /dev/null @@ -1 +0,0 @@ -s9180-32x/sonic_platform-1.0-py3-none-any.whl usr/share/sonic/device/x86_64-ufispace_s9180_32x-r0/pddf diff --git a/platform/barefoot/sonic-platform-modules-ufispace/debian/sonic-platform-ufispace-s9180-32x.postinst b/platform/barefoot/sonic-platform-modules-ufispace/debian/sonic-platform-ufispace-s9180-32x.postinst deleted file mode 100644 index c5d8d8f0ab..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/debian/sonic-platform-ufispace-s9180-32x.postinst +++ /dev/null @@ -1,5 +0,0 @@ -depmod -a -systemctl enable pddf-platform-init.service -systemctl start pddf-platform-init.service -systemctl enable platform-swss-restart.service -systemctl start --no-block platform-swss-restart.service diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/Makefile b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/Makefile deleted file mode 100644 index f5b3bc4213..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -MODULE_NAME = x86-64-ufispace-s9180-32x-sys-eeprom.o i2c-smbus.o -obj-m := $(MODULE_NAME) - -CFLAGS_pddf_custom_sysstatus_module.o := -I$(M)/../../../../pddf/i2c/modules/include -KBUILD_EXTRA_SYMBOLS := $(M)/../../../../pddf/i2c/Module.symvers.PDDF diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/i2c-smbus.c b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/i2c-smbus.c deleted file mode 100644 index 6c4e4dca56..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/i2c-smbus.c +++ /dev/null @@ -1,423 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * i2c-smbus.c - SMBus extensions to the I2C protocol - * - * Copyright (C) 2008 David Brownell - * Copyright (C) 2010-2019 Jean Delvare - */ - -#define __STDC_WANT_LIB_EXT1__ 1 -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static int disable_i2c_register_spd = 1; -module_param(disable_i2c_register_spd, int, 0); - -struct i2c_smbus_alert { - struct work_struct alert; - struct i2c_client *ara; /* Alert response address */ -}; - -struct alert_data { - unsigned short addr; - enum i2c_alert_protocol type; - unsigned int data; -}; - -/* If this is the alerting device, notify its driver */ -static int smbus_do_alert(struct device *dev, void *addrp) -{ - struct i2c_client *client = i2c_verify_client(dev); - struct alert_data *data = addrp; - struct i2c_driver *driver; - - if (!client || client->addr != data->addr) - return 0; - if (client->flags & I2C_CLIENT_TEN) - return 0; - - /* - * Drivers should either disable alerts, or provide at least - * a minimal handler. Lock so the driver won't change. - */ - device_lock(dev); - if (client->dev.driver) { - driver = to_i2c_driver(client->dev.driver); - if (driver->alert) - driver->alert(client, data->type, data->data); - else - dev_warn(&client->dev, "no driver alert()!\n"); - } else - dev_dbg(&client->dev, "alert with no driver\n"); - device_unlock(dev); - - /* Stop iterating after we find the device */ - return -EBUSY; -} - -/* - * The alert IRQ handler needs to hand work off to a task which can issue - * SMBus calls, because those sleeping calls can't be made in IRQ context. - */ -static irqreturn_t smbus_alert(int irq, void *d) -{ - struct i2c_smbus_alert *alert = d; - struct i2c_client *ara; - - ara = alert->ara; - - for (;;) { - s32 status; - struct alert_data data; - - /* - * Devices with pending alerts reply in address order, low - * to high, because of slave transmit arbitration. After - * responding, an SMBus device stops asserting SMBALERT#. - * - * Note that SMBus 2.0 reserves 10-bit addresses for future - * use. We neither handle them, nor try to use PEC here. - */ - status = i2c_smbus_read_byte(ara); - if (status < 0) - break; - - data.data = status & 1; - data.addr = status >> 1; - data.type = I2C_PROTOCOL_SMBUS_ALERT; - - dev_dbg(&ara->dev, "SMBALERT# from dev 0x%02x, flag %d\n", - data.addr, data.data); - - /* Notify driver for the device which issued the alert */ - device_for_each_child(&ara->adapter->dev, &data, - smbus_do_alert); - } - - return IRQ_HANDLED; -} - -static void smbalert_work(struct work_struct *work) -{ - struct i2c_smbus_alert *alert; - - alert = container_of(work, struct i2c_smbus_alert, alert); - - smbus_alert(0, alert); - -} - -/* Setup SMBALERT# infrastructure */ -static int smbalert_probe(struct i2c_client *ara, - const struct i2c_device_id *id) -{ - struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev); - struct i2c_smbus_alert *alert; - struct i2c_adapter *adapter = ara->adapter; - int res, irq; - - alert = devm_kzalloc(&ara->dev, sizeof(struct i2c_smbus_alert), - GFP_KERNEL); - if (!alert) - return -ENOMEM; - - if (setup) { - irq = setup->irq; - } else { - irq = of_irq_get_byname(adapter->dev.of_node, "smbus_alert"); - if (irq <= 0) - return irq; - } - - INIT_WORK(&alert->alert, smbalert_work); - alert->ara = ara; - - if (irq > 0) { - res = devm_request_threaded_irq(&ara->dev, irq, - NULL, smbus_alert, - IRQF_SHARED | IRQF_ONESHOT, - "smbus_alert", alert); - if (res) - return res; - } - - i2c_set_clientdata(ara, alert); - dev_info(&adapter->dev, "supports SMBALERT#\n"); - - return 0; -} - -/* IRQ and memory resources are managed so they are freed automatically */ -static int smbalert_remove(struct i2c_client *ara) -{ - struct i2c_smbus_alert *alert = i2c_get_clientdata(ara); - - cancel_work_sync(&alert->alert); - return 0; -} - -static const struct i2c_device_id smbalert_ids[] = { - { "smbus_alert", 0 }, - { /* LIST END */ } -}; -MODULE_DEVICE_TABLE(i2c, smbalert_ids); - -static struct i2c_driver smbalert_driver = { - .driver = { - .name = "smbus_alert", - }, - .probe = smbalert_probe, - .remove = smbalert_remove, - .id_table = smbalert_ids, -}; - -/** - * i2c_handle_smbus_alert - Handle an SMBus alert - * @ara: the ARA client on the relevant adapter - * Context: can't sleep - * - * Helper function to be called from an I2C bus driver's interrupt - * handler. It will schedule the alert work, in turn calling the - * corresponding I2C device driver's alert function. - * - * It is assumed that ara is a valid i2c client previously returned by - * i2c_new_smbus_alert_device(). - */ -int i2c_handle_smbus_alert(struct i2c_client *ara) -{ - struct i2c_smbus_alert *alert = i2c_get_clientdata(ara); - - return schedule_work(&alert->alert); -} -EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert); - -module_i2c_driver(smbalert_driver); - -#if IS_ENABLED(CONFIG_I2C_SLAVE) -#define SMBUS_HOST_NOTIFY_LEN 3 -struct i2c_slave_host_notify_status { - u8 index; - u8 addr; -}; - -static int i2c_slave_host_notify_cb(struct i2c_client *client, - enum i2c_slave_event event, u8 *val) -{ - struct i2c_slave_host_notify_status *status = client->dev.platform_data; - - switch (event) { - case I2C_SLAVE_WRITE_RECEIVED: - /* We only retrieve the first byte received (addr) - * since there is currently no support to retrieve the data - * parameter from the client. - */ - if (status->index == 0) - status->addr = *val; - if (status->index < U8_MAX) - status->index++; - break; - case I2C_SLAVE_STOP: - if (status->index == SMBUS_HOST_NOTIFY_LEN) - i2c_handle_smbus_host_notify(client->adapter, - status->addr); - fallthrough; - case I2C_SLAVE_WRITE_REQUESTED: - status->index = 0; - break; - case I2C_SLAVE_READ_REQUESTED: - case I2C_SLAVE_READ_PROCESSED: - *val = 0xff; - break; - } - - return 0; -} - -/** - * i2c_new_slave_host_notify_device - get a client for SMBus host-notify support - * @adapter: the target adapter - * Context: can sleep - * - * Setup handling of the SMBus host-notify protocol on a given I2C bus segment. - * - * Handling is done by creating a device and its callback and handling data - * received via the SMBus host-notify address (0x8) - * - * This returns the client, which should be ultimately freed using - * i2c_free_slave_host_notify_device(); or an ERRPTR to indicate an error. - */ -struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter) -{ - struct i2c_board_info host_notify_board_info = { - I2C_BOARD_INFO("smbus_host_notify", 0x08), - .flags = I2C_CLIENT_SLAVE, - }; - struct i2c_slave_host_notify_status *status; - struct i2c_client *client; - int ret; - - status = kzalloc(sizeof(struct i2c_slave_host_notify_status), - GFP_KERNEL); - if (!status) - return ERR_PTR(-ENOMEM); - - host_notify_board_info.platform_data = status; - - client = i2c_new_client_device(adapter, &host_notify_board_info); - if (IS_ERR(client)) { - kfree(status); - return client; - } - - ret = i2c_slave_register(client, i2c_slave_host_notify_cb); - if (ret) { - i2c_unregister_device(client); - kfree(status); - return ERR_PTR(ret); - } - - return client; -} -EXPORT_SYMBOL_GPL(i2c_new_slave_host_notify_device); - -/** - * i2c_free_slave_host_notify_device - free the client for SMBus host-notify - * support - * @client: the client to free - * Context: can sleep - * - * Free the i2c_client allocated via i2c_new_slave_host_notify_device - */ -void i2c_free_slave_host_notify_device(struct i2c_client *client) -{ - if (IS_ERR_OR_NULL(client)) - return; - - i2c_slave_unregister(client); - kfree(client->dev.platform_data); - i2c_unregister_device(client); -} -EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device); -#endif - -/* - * SPD is not part of SMBus but we include it here for convenience as the - * target systems are the same. - * Restrictions to automatic SPD instantiation: - * - Only works if all filled slots have the same memory type - * - Only works for DDR2, DDR3 and DDR4 for now - * - Only works on systems with 1 to 4 memory slots - */ -#if IS_ENABLED(CONFIG_DMI) -void i2c_register_spd(struct i2c_adapter *adap) -{ - int n, slot_count = 0, dimm_count = 0; - u16 handle; - u8 common_mem_type = 0x0, mem_type; - u64 mem_size; - const char *name; - - //disable spd scan to prevent address conflict between spd and sys eeprom - if (disable_i2c_register_spd == 1) { - return; - } - - while ((handle = dmi_memdev_handle(slot_count)) != 0xffff) { - slot_count++; - - /* Skip empty slots */ - mem_size = dmi_memdev_size(handle); - if (!mem_size) - continue; - - /* Skip undefined memory type */ - mem_type = dmi_memdev_type(handle); - if (mem_type <= 0x02) /* Invalid, Other, Unknown */ - continue; - - if (!common_mem_type) { - /* First filled slot */ - common_mem_type = mem_type; - } else { - /* Check that all filled slots have the same type */ - if (mem_type != common_mem_type) { - dev_warn(&adap->dev, - "Different memory types mixed, not instantiating SPD\n"); - return; - } - } - dimm_count++; - } - - /* No useful DMI data, bail out */ - if (!dimm_count) - return; - - dev_info(&adap->dev, "%d/%d memory slots populated (from DMI)\n", - dimm_count, slot_count); - - if (slot_count > 4) { - dev_warn(&adap->dev, - "Systems with more than 4 memory slots not supported yet, not instantiating SPD\n"); - return; - } - - switch (common_mem_type) { - case 0x13: /* DDR2 */ - case 0x18: /* DDR3 */ - case 0x1C: /* LPDDR2 */ - case 0x1D: /* LPDDR3 */ - name = "spd"; - break; - case 0x1A: /* DDR4 */ - case 0x1E: /* LPDDR4 */ - name = "ee1004"; - break; - default: - dev_info(&adap->dev, - "Memory type 0x%02x not supported yet, not instantiating SPD\n", - common_mem_type); - return; - } - - /* - * We don't know in which slots the memory modules are. We could - * try to guess from the slot names, but that would be rather complex - * and unreliable, so better probe all possible addresses until we - * have found all memory modules. - */ - for (n = 0; n < slot_count && dimm_count; n++) { - struct i2c_board_info info; - unsigned short addr_list[2]; - -#ifdef __STDC_LIB_EXT1__ - memset_s(&info, sizeof(struct i2c_board_info), 0, sizeof(struct i2c_board_info)); -#else - memset(&info, 0, sizeof(struct i2c_board_info)); -#endif - strlcpy(info.type, name, I2C_NAME_SIZE); - addr_list[0] = 0x50 + n; - addr_list[1] = I2C_CLIENT_END; - - if (!IS_ERR(i2c_new_scanned_device(adap, &info, addr_list, NULL))) { - dev_info(&adap->dev, - "Successfully instantiated SPD at 0x%hx\n", - addr_list[0]); - dimm_count--; - } - } -} -EXPORT_SYMBOL_GPL(i2c_register_spd); -#endif - -MODULE_AUTHOR("Jean Delvare "); -MODULE_DESCRIPTION("SMBus protocol extensions support"); -MODULE_LICENSE("GPL"); diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/x86-64-ufispace-s9180-32x-sys-eeprom.c b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/x86-64-ufispace-s9180-32x-sys-eeprom.c deleted file mode 100644 index f9f7728deb..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/modules/x86-64-ufispace-s9180-32x-sys-eeprom.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright (C) 1998, 1999 Frodo Looijaard and - * Philip Edelbrock - * Copyright (C) 2003 Greg Kroah-Hartman - * Copyright (C) 2003 IBM Corp. - * Copyright (C) 2004 Jean Delvare - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* enable dev_dbg print out */ -//#define DEBUG - -#define __STDC_WANT_LIB_EXT1__ 1 -#include -#include -#include -#include -#include -#include -#include - -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { /*0x50, 0x51, 0x52, 0x53, 0x54, - 0x55, 0x56, 0x57,*/ I2C_CLIENT_END }; - -/* Size of EEPROM in bytes */ -#define EEPROM_SIZE 512 - -#define SLICE_BITS (6) -#define SLICE_SIZE (1 << SLICE_BITS) -#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) - -/* Each client has this additional data */ -struct eeprom_data { - struct mutex update_lock; - u8 valid; /* bitfield, bit!=0 if slice is valid */ - unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ - u8 data[EEPROM_SIZE]; /* Register values */ -}; - - -static void sys_eeprom_update_client(struct i2c_client *client, u8 slice) -{ - struct eeprom_data *data = i2c_get_clientdata(client); - int i, j; - int ret; - int addr; - - mutex_lock(&data->update_lock); - - if (!(data->valid & (1 << slice)) || - time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { - dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); - - addr = slice << SLICE_BITS; - - ret = i2c_smbus_write_byte_data(client, (u8)((addr >> 8) & 0xFF), (u8)(addr & 0xFF)); - /* select the eeprom address */ - if (ret < 0) { - dev_err(&client->dev, "address set failed\n"); - goto exit; - } - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { - goto exit; - } - - for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { - for (j = i; j < (i+SLICE_SIZE); j++) { - int res; - - res = i2c_smbus_read_byte(client); - if (res < 0) { - goto exit; - } - - data->data[j] = res & 0xFF; - } - } - - data->last_updated[slice] = jiffies; - data->valid |= (1 << slice); - } -exit: - mutex_unlock(&data->update_lock); -} - -static ssize_t sys_eeprom_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) -{ - struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); - struct eeprom_data *data = i2c_get_clientdata(client); - u8 slice; - - if (off > EEPROM_SIZE) { - return 0; - } - if (off + count > EEPROM_SIZE) { - count = EEPROM_SIZE - off; - } - if (count == 0) { - return 0; - } - - /* Only refresh slices which contain requested bytes */ - for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { - sys_eeprom_update_client(client, slice); - } - - memcpy(buf, &data->data[off], count); - - return count; -} - -static ssize_t sys_eeprom_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) -{ - struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); - struct eeprom_data *data = i2c_get_clientdata(client); - int ret; - int i; - u8 cmd; - u16 value16; - - dev_dbg(&client->dev, "sys_eeprom_write off=%d, count=%d\n", (int)off, (int)count); - - if (off > EEPROM_SIZE) { - return 0; - } - if (off + count > EEPROM_SIZE) { - count = EEPROM_SIZE - off; - } - if (count == 0) { - return 0; - } - - mutex_lock(&data->update_lock); - - for(i=0; i < count; i++) { - /* write command */ - cmd = (off >> 8) & 0xff; - value16 = off & 0xff; - value16 |= buf[i] << 8; - ret = i2c_smbus_write_word_data(client, cmd, value16); - - if (ret < 0) { - dev_err(&client->dev, "write address failed at %d \n", (int)off); - goto exit; - } - - off++; - - /* need to wait for write complete */ - udelay(10000); - } -exit: - mutex_unlock(&data->update_lock); - /* force to update client when reading */ - for(i=0; i < SLICE_NUM; i++) { - data->last_updated[i] = 0; - } - - return count; -} - -static struct bin_attribute sys_eeprom_attr = { - .attr = { - .name = "eeprom", - .mode = S_IRUGO | S_IWUSR, - }, - .size = EEPROM_SIZE, - .read = sys_eeprom_read, - .write = sys_eeprom_write, -}; - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int sys_eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - - /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all - addresses 0x50-0x57, but we only care about 0x51 and 0x55. So decline - attaching to addresses >= 0x56 on DDC buses */ - if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x56) { - return -ENODEV; - } - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE) - && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { - return -ENODEV; - } - - strlcpy(info->type, "eeprom", I2C_NAME_SIZE); - - return 0; -} - -static int sys_eeprom_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct eeprom_data *data; - int err; - - if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - -#ifdef __STDC_LIB_EXT1__ - memset_s(data->data, EEPROM_SIZE, 0xff, EEPROM_SIZE); -#else - memset(data->data, 0xff, EEPROM_SIZE); -#endif - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); - - /* create the sysfs eeprom file */ - err = sysfs_create_bin_file(&client->dev.kobj, &sys_eeprom_attr); - if (err) { - goto exit_kfree; - } - - return 0; - -exit_kfree: - kfree(data); -exit: - return err; -} - -static int sys_eeprom_remove(struct i2c_client *client) -{ - sysfs_remove_bin_file(&client->dev.kobj, &sys_eeprom_attr); - kfree(i2c_get_clientdata(client)); - - return 0; -} - -static const struct i2c_device_id sys_eeprom_id[] = { - { "sys_eeprom", 0 }, - { } -}; - -static struct i2c_driver sys_eeprom_driver = { - .driver = { - .name = "sys_eeprom", - }, - .probe = sys_eeprom_probe, - .remove = sys_eeprom_remove, - .id_table = sys_eeprom_id, - - .class = I2C_CLASS_DDC | I2C_CLASS_SPD, - .detect = sys_eeprom_detect, - .address_list = normal_i2c, -}; - -module_i2c_driver(sys_eeprom_driver); - -MODULE_AUTHOR("Jason "); -MODULE_DESCRIPTION("UfiSpace System EEPROM driver"); -MODULE_LICENSE("GPL"); diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/service/pddf-platform-init.service b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/service/pddf-platform-init.service deleted file mode 120000 index 0fd9f25b6c..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/service/pddf-platform-init.service +++ /dev/null @@ -1 +0,0 @@ -../../../../pddf/i2c/service/pddf-platform-init.service \ No newline at end of file diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/service/platform-swss-restart.service b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/service/platform-swss-restart.service deleted file mode 100644 index 323a4b827c..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/service/platform-swss-restart.service +++ /dev/null @@ -1,13 +0,0 @@ -[Unit] -Description=SWSS restart service -After=swss.service -DefaultDependencies=no - -[Service] -Type=oneshot -ExecStart=/usr/local/bin/platform_swss_restart.sh -RemainAfterExit=yes - -[Install] -WantedBy=multi-user.target - diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/__init__.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/__init__.py deleted file mode 100644 index 593867d31c..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/__init__.py +++ /dev/null @@ -1,4 +0,0 @@ -# All the derived classes for PDDF -__all__ = ["platform", "chassis", "sfp", "psu", "thermal", "fan"] -from . import platform - diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/chassis.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/chassis.py deleted file mode 100644 index 017242de4d..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/chassis.py +++ /dev/null @@ -1,214 +0,0 @@ -#!/usr/bin/env python - -############################################################################# -# PDDF -# Module contains an implementation of SONiC Chassis API -# -############################################################################# - -try: - import time - import subprocess - from sonic_platform_pddf_base.pddf_chassis import PddfChassis -except ImportError as e: - raise ImportError(str(e) + "- required module not found") - -NUM_COMPONENT = 2 - -class Chassis(PddfChassis): - """ - PDDF Platform-specific Chassis class - """ - - STATUS_INSERTED = "1" - STATUS_REMOVED = "0" - port_dict = {} - - def __init__(self, pddf_data=None, pddf_plugin_data=None): - PddfChassis.__init__(self, pddf_data, pddf_plugin_data) - self._initialize_components() - - def _initialize_components(self): - from sonic_platform.component import Component - for index in range(NUM_COMPONENT): - component = Component(index) - self._component_list.append(component) - - # Provide the functions/variables below for which implementation is to be overwritten - def initizalize_system_led(self): - return True - - def get_status_led(self): - return self.get_system_led("SYS_LED") - - def get_system_led(self, led_device_name): - ipmi_cmd_sys_led = "ipmitool raw 0x3c 0x20 0x0" - ipmi_cmd_fantray_led = "ipmitool raw 0x3c 0x21 0x0" - - led_dict = {"SYS_LED": { - "ipmi_cmd": ipmi_cmd_sys_led, - "index": 0}, - "FAN_LED": { - "ipmi_cmd": ipmi_cmd_sys_led, - "index": 1}, - "PSU1_LED": { - "ipmi_cmd": ipmi_cmd_sys_led, - "index": 2}, - "PSU2_LED": { - "ipmi_cmd": ipmi_cmd_sys_led, - "index": 3}, - "FANTRAY1_LED": { - "ipmi_cmd": ipmi_cmd_fantray_led, - "index": 0}, - "FANTRAY2_LED": { - "ipmi_cmd": ipmi_cmd_fantray_led, - "index": 1}, - "FANTRAY3_LED": { - "ipmi_cmd": ipmi_cmd_fantray_led, - "index": 2}, - "FANTRAY4_LED": { - "ipmi_cmd": ipmi_cmd_fantray_led, - "index": 3} - } - color_dict = {0: "off", - 1: "yellow", - 2: "green"} - - if led_device_name not in led_dict.keys(): - status = "[FAILED] " + led_device_name + " is not configured" - return (status) - - ipmi_cmd = led_dict[led_device_name]["ipmi_cmd"] - index = led_dict[led_device_name]["index"] - status, output = subprocess.getstatusoutput(ipmi_cmd) - - if status != 0: - return ("ipmi_cmd error, cmd={}, status={}".format(ipmi_cmd, status)) - - color_raw = int(output.split()[index]) - - if color_raw not in color_dict.keys(): - color = "unknown" - else: - color = color_dict[color_raw] - - return (color) - - def get_change_event(self, timeout=0): - """ - Returns a nested dictionary containing all devices which have - experienced a change at chassis level - Args: - timeout: Timeout in milliseconds (optional). If timeout == 0, - this method will block until a change is detected. - Returns: - (bool, dict): - - bool: True if call successful, False if not; - - dict: A nested dictionary where key is a device type, - value is a dictionary with key:value pairs in the format of - {'device_id':'device_event'}, where device_id is the device ID - for this device and device_event. - The known devices's device_id and device_event was defined as table below. - ----------------------------------------------------------------- - device | device_id | device_event | annotate - ----------------------------------------------------------------- - 'fan' '' '0' Fan removed - '1' Fan inserted - 'sfp' '' '0' Sfp removed - '1' Sfp inserted - '2' I2C bus stuck - '3' Bad eeprom - '4' Unsupported cable - '5' High Temperature - '6' Bad cable - 'voltage' '' '0' Vout normal - '1' Vout abnormal - -------------------------------------------------------------------- - Ex. {'fan':{'0':'0', '2':'1'}, 'sfp':{'11':'0', '12':'1'}, - 'voltage':{'U20':'0', 'U21':'1'}} - Indicates that: - fan 0 has been removed, fan 2 has been inserted. - sfp 11 has been removed, sfp 12 has been inserted. - monitored voltage U20 became normal, voltage U21 became abnormal. - Note: For sfp, when event 3-6 happened, the module will not be avalaible, - XCVRD shall stop to read eeprom before SFP recovered from error status. - """ - - change_event_dict = {"fan": {}, "sfp": {}, "voltage": {}} - - start_time = time.time() - forever = False - - if timeout == 0: - forever = True - elif timeout > 0: - timeout = timeout / float(1000) # Convert to secs - else: - print("get_change_event:Invalid timeout value", timeout) - return False, change_event_dict - - end_time = start_time + timeout - if start_time > end_time: - print( - "get_change_event:" "time wrap / invalid timeout value", - timeout, - ) - return False, change_event_dict # Time wrap or possibly incorrect timeout - try: - while timeout >= 0: - # check for sfp - sfp_change_dict = self.get_transceiver_change_event() - # check for fan - # fan_change_dict = self.get_fan_change_event() - # check for voltage - # voltage_change_dict = self.get_voltage_change_event() - - if sfp_change_dict: - change_event_dict["sfp"] = sfp_change_dict - # change_event_dict["fan"] = fan_change_dict - # change_event_dict["voltage"] = voltage_change_dict - return True, change_event_dict - if forever: - time.sleep(1) - else: - timeout = end_time - time.time() - if timeout >= 1: - time.sleep(1) # We poll at 1 second granularity - else: - if timeout > 0: - time.sleep(timeout) - return True, change_event_dict - except Exception as e: - print(e) - print("get_change_event: Should not reach here.") - return False, change_event_dict - - def get_transceiver_change_event(self): - current_port_dict = {} - ret_dict = {} - - # Check for OIR events and return ret_dict - for index in range(self.platform_inventory['num_ports']): - if self._sfp_list[index].get_presence(): - current_port_dict[index] = self.STATUS_INSERTED - else: - current_port_dict[index] = self.STATUS_REMOVED - - if len(self.port_dict) == 0: # first time - self.port_dict = current_port_dict - return {} - - if current_port_dict == self.port_dict: - return {} - - # Update reg value - for index, status in current_port_dict.items(): - if self.port_dict[index] != status: - ret_dict[index] = status - #ret_dict[str(index)] = status - self.port_dict = current_port_dict - for index, status in ret_dict.items(): - if int(status) == 1: - pass - #self._sfp_list[int(index)].check_sfp_optoe_type() - return ret_dict diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/component.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/component.py deleted file mode 100644 index 0355e07621..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/component.py +++ /dev/null @@ -1,113 +0,0 @@ -############################################################################# -# -# Component contains an implementation of SONiC Platform Base API and -# provides the components firmware management function -# -############################################################################# - -try: - import subprocess - from sonic_platform_base.component_base import ComponentBase -except ImportError as e: - raise ImportError(str(e) + "- required module not found") - -BMC_CMDS = { - "VER1": "ipmitool mc info | grep 'Firmware Revision' | cut -d':' -f2 | cut -d'.' -f1", - "VER2": "ipmitool mc info | grep 'Firmware Revision' | cut -d':' -f2 | cut -d'.' -f2", - "VER3": "echo $((`ipmitool mc info | grep 'Aux Firmware Rev Info' -A 2 | sed -n '2p'` + 0))", -} - -BIOS_VERSION_PATH = "/sys/class/dmi/id/bios_version" -COMPONENT_LIST= [ - ("BIOS", "Basic Input/Output System"), - ("BMC", "BMC"), - -] - -class Component(ComponentBase): - """Platform-specific Component class""" - - DEVICE_TYPE = "component" - - def __init__(self, component_index=0): - self.index = component_index - self.name = self.get_name() - - def _run_command(self, command): - # Run bash command and print output to stdout - try: - process = subprocess.Popen( - shlex.split(command), stdout=subprocess.PIPE) - while True: - output = process.stdout.readline() - if output == '' and process.poll() is not None: - break - rc = process.poll() - if rc != 0: - return False - except Exception: - return False - return True - - def _get_bios_version(self): - # Retrieves the BIOS firmware version - try: - with open(BIOS_VERSION_PATH, 'r') as fd: - bios_version = fd.read() - return bios_version.strip() - except Exception as e: - return None - - def _get_bmc_version(self): - # Retrieves the BMC firmware version - bmc_ver = dict() - for ver in BMC_CMDS: - status, value = subprocess.getstatusoutput(BMC_CMDS[ver]) - if not status: - bmc_ver[ver] = int(value.rstrip()) - else: - return None - - bmc_version = "{}.{}.{}".format(bmc_ver["VER1"], bmc_ver["VER2"], bmc_ver["VER3"]) - - return bmc_version - - def get_name(self): - """ - Retrieves the name of the component - Returns: - A string containing the name of the component - """ - return COMPONENT_LIST[self.index][0] - - def get_description(self): - """ - Retrieves the description of the component - Returns: - A string containing the description of the component - """ - return COMPONENT_LIST[self.index][1] - - def get_firmware_version(self): - """ - Retrieves the firmware version of module - Returns: - string: The firmware versions of the module - """ - fw_version = None - - if self.name == "BIOS": - fw_version = self._get_bios_version() - elif self.name == "BMC": - fw_version = self._get_bmc_version() - return fw_version - - def install_firmware(self, image_path): - """ - Install firmware to module - Args: - image_path: A string, path to firmware image - Returns: - A boolean, True if install successfully, False if not - """ - raise NotImplementedError diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/eeprom.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/eeprom.py deleted file mode 100644 index a87ecc9f6f..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/eeprom.py +++ /dev/null @@ -1,14 +0,0 @@ -#!/usr/bin/env python - -try: - from sonic_platform_pddf_base.pddf_eeprom import PddfEeprom -except ImportError as e: - raise ImportError(str(e) + "- required module not found") - - -class Eeprom(PddfEeprom): - - def __init__(self, pddf_data=None, pddf_plugin_data=None): - PddfEeprom.__init__(self, pddf_data, pddf_plugin_data) - - # Provide the functions/variables below for which implementation is to be overwritten diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/fan.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/fan.py deleted file mode 100644 index 40bfb40a01..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/fan.py +++ /dev/null @@ -1,147 +0,0 @@ -#!/usr/bin/env python - - -try: - from sonic_platform_pddf_base.pddf_fan import PddfFan -except ImportError as e: - raise ImportError(str(e) + "- required module not found") - - -class Fan(PddfFan): - """PDDF Platform-Specific Fan class""" - - def __init__(self, tray_idx, fan_idx=0, pddf_data=None, pddf_plugin_data=None, is_psu_fan=False, psu_index=0): - # idx is 0-based - PddfFan.__init__(self, tray_idx, fan_idx, pddf_data, pddf_plugin_data, is_psu_fan, psu_index) - - # Provide the functions/variables below for which implementation is to be overwritten - # Since psu_fan airflow direction cant be read from sysfs, it is fixed as 'F2B' or 'intake' - - def get_speed(self): - """ - Retrieves the speed of fan as a percentage of full speed - - Returns: - An integer, the percentage of full fan speed, in the range 0 (off) - to 100 (full speed) - """ - speed_percentage = 0 - if self.is_psu_fan: - attr = "psu_fan{}_speed_rpm".format(self.fan_index) - device = "PSU{}".format(self.fans_psu_index) - max_speed = int(self.plugin_data['PSU']['PSU_FAN_MAX_SPEED']) - else: - if self.fan_index == 1: - pos = "f" - max_speed = int(self.plugin_data['FAN']['FAN_F_MAX_SPEED']) - else: - pos = "r" - max_speed = int(self.plugin_data['FAN']['FAN_R_MAX_SPEED']) - attr = "fan{}_{}_speed_rpm".format(self.fantray_index, pos) - device = "FAN-CTRL" - - output = self.pddf_obj.get_attr_name_output(device, attr) - if not output: - return speed_percentage - - output['status'] = output['status'].rstrip() - if output['status'].isalpha(): - return speed_percentage - else: - speed = int(float(output['status'])) - - speed_percentage = round((speed*100)/max_speed) - - return min(speed_percentage, 100) - - def get_speed_rpm(self): - """ - Retrieves the speed of fan in RPM - - Returns: - An integer, Speed of fan in RPM - """ - rpm_speed = 0 - if self.is_psu_fan: - attr = "psu_fan{}_speed_rpm".format(self.fan_index) - device = "PSU{}".format(self.fans_psu_index) - else: - if self.fan_index == 1: - pos = "f" - else: - pos = "r" - attr = "fan{}_{}_speed_rpm".format(self.fantray_index, pos) - device = "FAN-CTRL" - - output = self.pddf_obj.get_attr_name_output(device, attr) - - if output is None: - return rpm_speed - - output['status'] = output['status'].rstrip() - if output['status'].isalpha(): - return rpm_speed - else: - rpm_speed = int(float(output['status'])) - - return rpm_speed - - def get_direction(self): - """ - Retrieves the direction of fan - Returns: - A string, either FAN_DIRECTION_INTAKE or FAN_DIRECTION_EXHAUST - depending on fan direction - """ - - return self.FAN_DIRECTION_EXHAUST - - def get_presence(self): - """ - Retrieves the presence of the device - Returns: - bool: True if device is present, False if not - """ - presence = False - if self.is_psu_fan: - attr = "psu_present" - device = "PSU{}".format(self.fans_psu_index) - else: - attr = "fan{}_present".format(self.fantray_index) - device = "FAN-CTRL" - - output = self.pddf_obj.get_attr_name_output(device, attr) - if not output: - return presence - - - mode = output['mode'] - val = output['status'].strip() - vmap = self.plugin_data['FAN']['present'][mode]['valmap'] - - if val in vmap: - presence = vmap[val] - - return presence - - def get_status(self): - """ - Retrieves the operational status of the device - - Returns: - A boolean value, True if device is operating properly, False if not - """ - speed = self.get_speed_rpm() - status = True if (speed != 0) else False - return status - - def get_target_speed(self): - """ - Retrieves the target (expected) speed of the fan - Returns: - An integer, the percentage of full fan speed, in the range 0 (off) - to 100 (full speed) - """ - - return self.get_speed() - diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/fan_drawer.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/fan_drawer.py deleted file mode 100644 index 3b9bb607f6..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/fan_drawer.py +++ /dev/null @@ -1,17 +0,0 @@ -#!/usr/bin/env python - - -try: - from sonic_platform_pddf_base.pddf_fan_drawer import PddfFanDrawer -except ImportError as e: - raise ImportError(str(e) + "- required module not found") - - -class FanDrawer(PddfFanDrawer): - """PDDF Platform-Specific Fan-Drawer class""" - - def __init__(self, tray_idx, pddf_data=None, pddf_plugin_data=None): - # idx is 0-based - PddfFanDrawer.__init__(self, tray_idx, pddf_data, pddf_plugin_data) - - # Provide the functions/variables below for which implementation is to be overwritten diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/platform.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/platform.py deleted file mode 100644 index 406b1179ae..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/platform.py +++ /dev/null @@ -1,25 +0,0 @@ -#!/usr/bin/env python - -############################################################################# -# PDDF -# Module contains an implementation of SONiC Platform Base API and -# provides the platform information -# -############################################################################# - - -try: - from sonic_platform_pddf_base.pddf_platform import PddfPlatform -except ImportError as e: - raise ImportError(str(e) + "- required module not found") - - -class Platform(PddfPlatform): - """ - PDDF Platform-Specific Platform Class - """ - - def __init__(self): - PddfPlatform.__init__(self) - - # Provide the functions/variables below for which implementation is to be overwritten diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/psu.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/psu.py deleted file mode 100644 index 3d84a4a39c..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/psu.py +++ /dev/null @@ -1,38 +0,0 @@ -#!/usr/bin/env python - - -try: - from sonic_platform_pddf_base.pddf_psu import PddfPsu -except ImportError as e: - raise ImportError (str(e) + "- required module not found") - - -class Psu(PddfPsu): - """PDDF Platform-Specific PSU class""" - - PLATFORM_PSU_CAPACITY = 550 - - def __init__(self, index, pddf_data=None, pddf_plugin_data=None): - PddfPsu.__init__(self, index, pddf_data, pddf_plugin_data) - - # Provide the functions/variables below for which implementation is to be overwritten - def get_maximum_supplied_power(self): - """ - Retrieves the maximum supplied power by PSU (or PSU capacity) - Returns: - A float number, the maximum power output in Watts. - e.g. 1200.1 - """ - return float(self.PLATFORM_PSU_CAPACITY) - - def get_power(self): - """ - Retrieves current energy supplied by PSU - - Returns: - A float number, the power in watts, - e.g. 302.6 - """ - - # power is returned in micro watts - return float(self.get_voltage()*self.get_current()) diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/sfp.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/sfp.py deleted file mode 100644 index d9b6e491be..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/sfp.py +++ /dev/null @@ -1,17 +0,0 @@ -#!/usr/bin/env python - -try: - from sonic_platform_pddf_base.pddf_sfp import PddfSfp -except ImportError as e: - raise ImportError (str(e) + "- required module not found") - - -class Sfp(PddfSfp): - """ - PDDF Platform-Specific Sfp class - """ - - def __init__(self, index, pddf_data=None, pddf_plugin_data=None): - PddfSfp.__init__(self, index, pddf_data, pddf_plugin_data) - - # Provide the functions/variables below for which implementation is to be overwritten diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/thermal.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/thermal.py deleted file mode 100644 index 77d6ec7ae8..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/thermal.py +++ /dev/null @@ -1,17 +0,0 @@ -#!/usr/bin/env python - - -try: - from sonic_platform_pddf_base.pddf_thermal import PddfThermal -except ImportError as e: - raise ImportError(str(e) + "- required module not found") - - - -class Thermal(PddfThermal): - """PDDF Platform-Specific Thermal class""" - - def __init__(self, index, pddf_data=None, pddf_plugin_data=None, is_psu_thermal=False, psu_index=0): - PddfThermal.__init__(self, index, pddf_data, pddf_plugin_data, is_psu_thermal, psu_index) - - # Provide the functions/variables below for which implementation is to be overwritten diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/watchdog.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/watchdog.py deleted file mode 100644 index 88660b1a1f..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform/watchdog.py +++ /dev/null @@ -1,23 +0,0 @@ -#!/usr/bin/env python - -############################################################################# -# -# Module contains an implementation of platform specific watchdog API's -# -############################################################################# - -try: - from sonic_platform_pddf_base.pddf_watchdog import PddfWatchdog -except ImportError as e: - raise ImportError(str(e) + "- required module not found") - -class Watchdog(PddfWatchdog): - """ - PDDF Platform-specific Chassis class - """ - - def __init__(self): - PddfWatchdog.__init__(self) - self.timeout= 180 - - # Provide the functions/variables below for which implementation is to be overwritten diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform_setup.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform_setup.py deleted file mode 100644 index 3661c84a0c..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/sonic_platform_setup.py +++ /dev/null @@ -1,27 +0,0 @@ -from setuptools import setup - -setup( - name='sonic-platform', - version='1.0', - description='SONiC platform API implementation on ufispace platform', - license='Apache 2.0', - author='SONiC Team', - author_email='linuxnetdev@microsoft.com', - url='https://github.com/Azure/sonic-buildimage', - maintainer='Leo Lin', - maintainer_email='leo.yt.lin@ufispace.com', - packages=['sonic_platform'], - classifiers=[ - 'Development Status :: 3 - Alpha', - 'Environment :: Plugins', - 'Intended Audience :: Developers', - 'Intended Audience :: Information Technology', - 'Intended Audience :: System Administrators', - 'License :: OSI Approved :: Apache Software License', - 'Natural Language :: English', - 'Operating System :: POSIX :: Linux', - 'Programming Language :: Python :: 3.7', - 'Topic :: Utilities', - ], - keywords='sonic SONiC platform PLATFORM', -) diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_post_device_create.sh b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_post_device_create.sh deleted file mode 100755 index d54ff14d71..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_post_device_create.sh +++ /dev/null @@ -1,93 +0,0 @@ -#!/bin/bash - -# init Host GPIO 0x74 -i2cset -f -y -r 0 0x74 4 0x00 -i2cset -f -y -r 0 0x74 5 0x00 -i2cset -f -y -r 0 0x74 2 0x0F -i2cset -f -y -r 0 0x74 3 0xDF -i2cset -f -y -r 0 0x74 6 0x08 -i2cset -f -y -r 0 0x74 7 0x1F - -gpio_base=511 - -# gpio sysfs active_low - ABS Port 0-31 -# gpio 480-511 -start=$((gpio_base-31)) -end=$gpio_base -for (( i=$start; i<=$end; i++ )) -do - echo 1 > /sys/class/gpio/gpio${i}/active_low -done - -# gpio sysfs active_low - Intr Port 0-31 -# gpio 448-479 -start=$((gpio_base-63)) -end=$((gpio_base-32)) -for (( i=$start; i<=$end; i++ )) -do - echo 1 > /sys/class/gpio/gpio${i}/active_low -done - - -# gpio sysfs active_low - SFP Port -# gpio 432-447 -sfp_active_low_array=(1 1 1 1 0 0 1 1 \ - 0 0 0 0 1 1 1 1) -start=$((gpio_base-79)) -end=$((gpio_base-64)) -for (( i=$start; i<=$end; i++ )) -do - echo ${sfp_active_low_array[$((i-start))]} > /sys/class/gpio/gpio${i}/active_low -done - -# gpio sysfs active_low - LP Mode Mode Port 0-31 -# gpio 400-431 -start=$((gpio_base-111)) -end=$((gpio_base-80)) -for (( i=$start; i<=$end; i++ )) -do - echo 0 > /sys/class/gpio/gpio${i}/active_low -done - -# gpio sysfs active_low - RST Mode Port 0-31 -# gpio 368-399 -start=$((gpio_base-143)) -end=$((gpio_base-112)) -for (( i=$start; i<=$end; i++ )) -do - echo 1 > /sys/class/gpio/gpio${i}/active_low - echo 0 > /sys/class/gpio/gpio${i}/value -done - -# init QSFP port name -qsfp_bus_array=(10 9 12 11 14 13 16 15 18 17 \ - 20 19 22 21 24 23 26 25 28 27 \ - 30 29 32 31 34 33 36 35 38 37 \ - 40 39) -for i in {0..31}; -do - echo $((i + 1)) > /sys/bus/i2c/devices/${qsfp_bus_array[i]}-0050/port_name - #echo "echo $((i + 1)) > /sys/bus/i2c/devices/${qsfp_bus_array[i]}-0050/port_name" -done - -# init SFP port name -sfp_bus_array=(45 46) -for i in {0..1}; -do - echo $((i + 33)) > /sys/bus/i2c/devices/${sfp_bus_array[i]}-0050/port_name -done - -# _mac_vdd_init -# vid to mac vdd value mapping -vdd_val_array=( 0.85 0.82 0.77 0.87 0.74 0.84 0.79 0.89 ) -# vid to rov reg value mapping -rov_reg_array=( 0x24 0x21 0x1C 0x26 0x19 0x23 0x1E 0x28 ) - -reg_val=$(eval "i2cget -f -y 44 0x33 0x42 2>/dev/null") -vid=$(($reg_val & 0x7)) -mac_vdd_val=${vdd_val_array[vid]} -rov_reg=${rov_reg_array[vid]} -i2cset -f -y -r 8 0x22 0x21 ${rov_reg} w 2>/dev/null - -echo "PDDF device post-create completed" - diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_post_driver_install.sh b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_post_driver_install.sh deleted file mode 100755 index ed2559977e..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_post_driver_install.sh +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/bash -echo "PDDF driver post-install completed" diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_pre_driver_install.sh b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_pre_driver_install.sh deleted file mode 100755 index a82d23333b..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_pre_driver_install.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash -#rmmod gpio_ich -modprobe -rq i2c_i801 -modprobe -rq i2c_smbus -echo "PDDF driver pre-install completed" diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_switch_svc.py b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_switch_svc.py deleted file mode 100755 index f2b3645ba6..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pddf_switch_svc.py +++ /dev/null @@ -1,55 +0,0 @@ -#!/usr/bin/env python -# Script to stop and start the respective platforms default services. -# This will be used while switching the pddf->non-pddf mode and vice versa -import commands - -def check_pddf_support(): - return True - -def stop_platform_svc(): - - ''' - status, output = commands.getstatusoutput("/usr/local/bin/platform_utility.py deinit") - if status: - print "platform_utility.py deinit command failed %d"%status - return False - ''' - - # HACK , stop the pddf-platform-init service if it is active - status, output = commands.getstatusoutput("systemctl stop pddf-platform-init.service") - if status: - print "Stop pddf-platform-init.service along with other platform serives failed %d"%status - return False - - return True - -def start_platform_svc(): - - ''' - status, output = commands.getstatusoutput("/usr/local/bin/platform_utility.py init") - if status: - print "platform_utility.py init command failed %d"%status - return False - - return True - ''' - return True - -def start_platform_pddf(): - - status, output = commands.getstatusoutput("systemctl start pddf-platform-init.service") - if status: - print "Start pddf-platform-init.service failed %d"%status - return False - - return True - -def stop_platform_pddf(): - - status, output = commands.getstatusoutput("systemctl stop pddf-platform-init.service") - if status: - print "Stop pddf-platform-init.service failed %d"%status - return False - - return True - diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/platform_swss_restart.sh b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/platform_swss_restart.sh deleted file mode 100755 index 2509e36929..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/platform_swss_restart.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash - -service swss restart -echo "SWSS service restarted" - diff --git a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pre_pddf_init.sh b/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pre_pddf_init.sh deleted file mode 100755 index 63a2e20580..0000000000 --- a/platform/barefoot/sonic-platform-modules-ufispace/s9180-32x/utils/pre_pddf_init.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash -#rmmod gpio_ich -modprobe -rq i2c_i801 -modprobe -rq i2c_smbus -echo "Pre PDDF init steps completed successully"