matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
eb75f7252d
sonic-buildimage/platform/mellanox/sdk.mk

179 lines
8.6 KiB
Makefile
Raw Normal View History

[Mellanox] Add NVIDIA Copyright header to "mellanox" files (#8799) - Why I did it Add NVIDIA Copyright header to "mellanox" files - How I did it Add NVIDIA Copyright header as a comment for Mellanox files - How to verify it Sanity tests and PR checkers.
2021-10-17 11:03:02 -05:00
#
[Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <kebol@nvidia.com>
2023-08-15 07:32:52 -05:00
# Copyright (c) 2016-2023 NVIDIA CORPORATION & AFFILIATES.
[Mellanox] Add NVIDIA Copyright header to "mellanox" files (#8799) - Why I did it Add NVIDIA Copyright header to "mellanox" files - How I did it Add NVIDIA Copyright header as a comment for Mellanox files - How to verify it Sanity tests and PR checkers.
2021-10-17 11:03:02 -05:00
# Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
[Mellanox] Update SDK/FW to 4.6.1062/2012.1062 Update SDK/FW/SAI to 4.6.1062/2012.1062/SAIBuild2211.25.1.4 (#16478) - Why I did it SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 which is 255 when fastboot enable and 511 when fastboot disable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile 2. Dual ToR Active-Standby | Additional MAC support SDK/FW bug fixes 1. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. - How I did it Update SAI version to SAIBuild2211.25.1.4 Update SDK/FW version to 4.6.1062/2012.1062
2023-09-07 06:05:33 -05:00
MLNX_SDK_VERSION = 4.6.1062
[submodule] update sonic-linux-kernel (#2985) * [submodule] update sonic-linux-kernel * update linux kernel version * Fix many version strings * update mellanox components (built with new kernel) * [mlnx] add make files for SDK WJH libs * Update arista driver submodule (#8) Make the debian packaging point to a newer kernel version.
2019-06-18 12:00:16 -05:00
MLNX_SDK_ISSU_VERSION = 101
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
[Mellanox] Facilitate automatic integration of sdk kernel patches (#14652) #### Why I did it Facilitate Automatic integration of sdk kernel patches into SONiC. **Inputs to the Script:** 1) `MLNX_SDK_VERSION` Eg: `4.5.4206` 2) `MLNX_SDK_ISSU_VERSION` Eg: `101` **Note: If nothing is provided the one already present in the sdk.mk file is used** 3) `MLNX_SDK_SOURCE_BASE_URL:` **Note: If nothing is provided the upstream sdk drivers url is used** 4) `CREATE_BRANCH: (y|n)` Creates a branch instead of a commit (optional, default: n) 5) `BRANCH_SONIC`: Only relevant when CREATE_BRANCH is y. `Default: master`. Note: These should be provided through `SONIC_OVERRIDE_BUILD_VARS ` parameter **Output:** 1) Script creates a commit in sonic-linux-kernel with any updates to sdk-kernel patches in sonic in accordance with the version provided by `MLNX_SDK_VERSION` **Note: Script Doesn't commit anything to linux-kernel when there aren't any changes required..** #### How I did it 1) Added a new make target which can be invoked by calling `make integrate-mlnx-sdk` ``` user@server:/sonic-buildimage/src/sonic-linux-kernel$ git rev-parse --abbrev-ref HEAD master_6f38dca_integrate_4.5.4206 user@server:/sonic-buildimage/src/sonic-linux-kernel$ git log --oneline -n 1 d64d1e7 (HEAD -> master_6f38dca_integrate_4.5.4206) Intgerate MLNX SDK 4.5.4206 Kernel Patches ``` Changes made will be summarized under `sonic-buildimage/integrate-mlnx-sdk_user.out` file. Debugging and troubleshooting output is written to `sonic-buildimage/integrate-mlnx-sdk.log` files [log_files.zip](https://github.com/sonic-net/sonic-buildimage/files/11226441/log_files.zip) #### Limitations: 1) Assumes that the sdk kernel patches are always upstreamed #### How to verify it Build the Kernel and test
2023-05-30 00:24:06 -05:00
MLNX_SDK_DRIVERS_GITHUB_URL = https://github.com/Mellanox/Spectrum-SDK-Drivers
[Mellanox] update sdk/fw build procedure (#14025) - Why I did it To optimize Mellanox platform build - How I did it sdk debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release sx kernel is downloaded as zip from Spectrum-SDK-Drivers - How to verify it configure/build for Mellanox platform Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
2023-03-02 01:48:47 -06:00
MLNX_ASSETS_GITHUB_URL = https://github.com/Mellanox/Spectrum-SDK-Drivers-SONiC-Bins
MLNX_SDK_ASSETS_RELEASE_TAG = sdk-$(MLNX_SDK_VERSION)-$(BLDENV)-$(CONFIGURED_ARCH)
MLNX_SDK_ASSETS_URL = $(MLNX_ASSETS_GITHUB_URL)/releases/download/$(MLNX_SDK_ASSETS_RELEASE_TAG)
[platform mellanox] Substitute '-' symbol to '.' in Mellanox SDK version to prevent problems with finding deb package (#5756) In case of non-GA SDK version there is '-' symbol in Mellanox SDK version name. (For example: 4.4.1306-006) In appropriate .deb packet there is '.' instead of '-'. Because of this there was problem while building SDK Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
2020-11-10 21:27:09 -06:00
MLNX_SDK_DEB_VERSION = $(subst -,.,$(subst _,.,$(MLNX_SDK_VERSION)))
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
# Place here URL where SDK sources exist
[submodule] update sonic-linux-kernel (#2985) * [submodule] update sonic-linux-kernel * update linux kernel version * Fix many version strings * update mellanox components (built with new kernel) * [mlnx] add make files for SDK WJH libs * Update arista driver submodule (#8) Make the debian packaging point to a newer kernel version.
2019-06-18 12:00:16 -05:00
MLNX_SDK_SOURCE_BASE_URL =
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifneq ($(MLNX_SDK_SOURCE_BASE_URL), )
SDK_FROM_SRC = y
else
SDK_FROM_SRC = n
endif
[Mellanox] Facilitate automatic integration of sdk kernel patches (#14652) #### Why I did it Facilitate Automatic integration of sdk kernel patches into SONiC. **Inputs to the Script:** 1) `MLNX_SDK_VERSION` Eg: `4.5.4206` 2) `MLNX_SDK_ISSU_VERSION` Eg: `101` **Note: If nothing is provided the one already present in the sdk.mk file is used** 3) `MLNX_SDK_SOURCE_BASE_URL:` **Note: If nothing is provided the upstream sdk drivers url is used** 4) `CREATE_BRANCH: (y|n)` Creates a branch instead of a commit (optional, default: n) 5) `BRANCH_SONIC`: Only relevant when CREATE_BRANCH is y. `Default: master`. Note: These should be provided through `SONIC_OVERRIDE_BUILD_VARS ` parameter **Output:** 1) Script creates a commit in sonic-linux-kernel with any updates to sdk-kernel patches in sonic in accordance with the version provided by `MLNX_SDK_VERSION` **Note: Script Doesn't commit anything to linux-kernel when there aren't any changes required..** #### How I did it 1) Added a new make target which can be invoked by calling `make integrate-mlnx-sdk` ``` user@server:/sonic-buildimage/src/sonic-linux-kernel$ git rev-parse --abbrev-ref HEAD master_6f38dca_integrate_4.5.4206 user@server:/sonic-buildimage/src/sonic-linux-kernel$ git log --oneline -n 1 d64d1e7 (HEAD -> master_6f38dca_integrate_4.5.4206) Intgerate MLNX SDK 4.5.4206 Kernel Patches ``` Changes made will be summarized under `sonic-buildimage/integrate-mlnx-sdk_user.out` file. Debugging and troubleshooting output is written to `sonic-buildimage/integrate-mlnx-sdk.log` files [log_files.zip](https://github.com/sonic-net/sonic-buildimage/files/11226441/log_files.zip) #### Limitations: 1) Assumes that the sdk kernel patches are always upstreamed #### How to verify it Build the Kernel and test
2023-05-30 00:24:06 -05:00
export MLNX_SDK_SOURCE_BASE_URL MLNX_SDK_VERSION MLNX_SDK_ISSU_VERSION MLNX_SDK_DEB_VERSION MLNX_ASSETS_GITHUB_URL MLNX_SDK_DRIVERS_GITHUB_URL
[devices]: Added new SN3700/SN3700C Mellanox platforms (#2548) * [mlnx-msn3700]: Added MSN3700 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [mlnx-msn3700]: Upgrade FW burn: use ASIC auto detect. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [mlnx-msn3700]: Updated HW-MGMT/FW/MFT/SAI/SDK. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [mlnx-msn3700]: Added MSN3700C platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-02-14 01:08:04 -06:00
[Mellanox] Replace iproute2 supplied by SDK to iproute2 downloaded from Debian repository (#14726) - Why I did it Mellanox syncd container will be based on Debian iproute2 plus patches instead of Nvidia internal version of iproute2 - How I did it Download iproute2 from Debian repository, apply patches and compile to create a new target. The target is then deployed in syncd container of Mellanox switches only. The new target is called IPROUTE2_MLNX. - How to verify it Compile and load on switch, verify interfaces network devices created successfully. Verify LLDP shows connections to neighbors. Verify ping between 2 hosts over 2 router ports is successful.
2023-04-30 04:30:09 -05:00
MLNX_SDK_RDEBS += $(APPLIBS) $(SX_COMPLIB) $(SX_EXAMPLES) \
[Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <kebol@nvidia.com>
2023-08-15 07:32:52 -05:00
$(SX_GEN_UTILS) $(SXD_LIBS) $(WJH_LIBS) $(SX_ACL_HELPER) \
$(SX_HASH_CALC) $(SX_OBJ_DESC_LIB)
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
[Mellanox] Replace iproute2 supplied by SDK to iproute2 downloaded from Debian repository (#14726) - Why I did it Mellanox syncd container will be based on Debian iproute2 plus patches instead of Nvidia internal version of iproute2 - How I did it Download iproute2 from Debian repository, apply patches and compile to create a new target. The target is then deployed in syncd container of Mellanox switches only. The new target is called IPROUTE2_MLNX. - How to verify it Compile and load on switch, verify interfaces network devices created successfully. Verify LLDP shows connections to neighbors. Verify ping between 2 hosts over 2 router ports is successful.
2023-04-30 04:30:09 -05:00
MLNX_SDK_DEBS += $(APPLIBS_DEV) $(SX_COMPLIB_DEV) \
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
$(SX_COMPLIB_DEV_STATIC) $(SX_EXAMPLES_DEV) $(SX_GEN_UTILS_DEV) \
[Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <kebol@nvidia.com>
2023-08-15 07:32:52 -05:00
$(SXD_LIBS_DEV) $(SXD_LIBS_DEV_STATIC) $(WJH_LIBS_DEV) $(SX_ACL_HELPER_DEV) \
$(SX_HASH_CALC) $(SX_OBJ_DESC_LIB_DEV)
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
[Mellanox] Replace iproute2 supplied by SDK to iproute2 downloaded from Debian repository (#14726) - Why I did it Mellanox syncd container will be based on Debian iproute2 plus patches instead of Nvidia internal version of iproute2 - How I did it Download iproute2 from Debian repository, apply patches and compile to create a new target. The target is then deployed in syncd container of Mellanox switches only. The new target is called IPROUTE2_MLNX. - How to verify it Compile and load on switch, verify interfaces network devices created successfully. Verify LLDP shows connections to neighbors. Verify ping between 2 hosts over 2 router ports is successful.
2023-04-30 04:30:09 -05:00
MLNX_SDK_DBG_DEBS += $(APPLIBS_DBGSYM) $(SX_COMPLIB_DBGSYM) \
[Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <kebol@nvidia.com>
2023-08-15 07:32:52 -05:00
$(SX_EXAMPLES_DBGSYM) $(SX_GEN_UTILS_DBGSYM) \
[Mellanox] Add SDK hash calculator debian and update SDK makefile to compile it (#12840) - Why I did it Add SDK hash calculator Debian and update SDK makefile to compile it. - How I did it SDK hash calculator Debian will be used by ECMP calculator (PR #12482) - How to verify it Compile sonic-buildimage and verify SDK hash calculator Debian exist in target folder.
2022-11-28 05:30:40 -06:00
$(SXD_LIBS_DBGSYM) $(WJH_LIBS_DBGSYM) $(SX_ACL_HELPER_DBGSYM) \
[Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <kebol@nvidia.com>
2023-08-15 07:32:52 -05:00
$(SX_HASH_CALC_DBGSYM) $(SX_OBJ_DESC_LIB_DBGSYM)
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
APPLIBS = applibs_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
$(APPLIBS)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/applibs
$(APPLIBS)_DEPENDS += $(SX_COMPLIB_DEV) $(SX_GEN_UTILS_DEV) $(SXD_LIBS_DEV) $(LIBNL3_DEV) $(LIBNL_GENL3_DEV)
[docker-saiserver]: build docker-saiserver (#2244) * build docker-saiserver Signed-off-by: Guohan Lu <gulv@microsoft.com> * add docker saiserver mlnx/bfn/cavm * set nephos to 1.3.5 Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-11-14 03:15:31 -06:00
$(APPLIBS)_RDEPENDS += $(SX_COMPLIB) $(SX_GEN_UTILS) $(SXD_LIBS) $(LIBNL3) $(LIBNL_GENL3)
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
APPLIBS_DEV = applibs-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(APPLIBS),$(APPLIBS_DEV)))
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
APPLIBS_DBGSYM = applibs-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(APPLIBS),$(APPLIBS_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_COMPLIB = sx-complib_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
$(SX_COMPLIB)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-complib
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_COMPLIB_DEV = sx-complib-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(SX_COMPLIB),$(SX_COMPLIB_DEV)))
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_COMPLIB_DBGSYM = sx-complib-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_COMPLIB),$(SX_COMPLIB_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_EXAMPLES = sx-examples_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
$(SX_EXAMPLES)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-examples
[Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <kebol@nvidia.com>
2023-08-15 07:32:52 -05:00
$(SX_EXAMPLES)_DEPENDS += $(APPLIBS_DEV) $(SXD_LIBS_DEV)
$(SX_EXAMPLES)_RDEPENDS += $(APPLIBS) $(SXD_LIBS)
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_EXAMPLES_DEV = sx-examples-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(SX_EXAMPLES),$(SX_EXAMPLES_DEV)))
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_EXAMPLES_DBGSYM = sx-examples-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_EXAMPLES),$(SX_EXAMPLES_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_GEN_UTILS = sx-gen-utils_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
$(SX_GEN_UTILS)_SRC_PATH += $(PLATFORM_PATH)/sdk-src/sx-gen-utils
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
$(SX_GEN_UTILS)_DEPENDS += $(SX_COMPLIB_DEV)
[docker-saiserver]: build docker-saiserver (#2244) * build docker-saiserver Signed-off-by: Guohan Lu <gulv@microsoft.com> * add docker saiserver mlnx/bfn/cavm * set nephos to 1.3.5 Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-11-14 03:15:31 -06:00
$(SX_GEN_UTILS)_RDEPENDS += $(SX_COMPLIB)
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_GEN_UTILS_DEV = sx-gen-utils-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(SX_GEN_UTILS),$(SX_GEN_UTILS_DEV)))
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_GEN_UTILS_DBGSYM = sx-gen-utils-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_GEN_UTILS),$(SX_GEN_UTILS_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SXD_LIBS = sxd-libs_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
$(SXD_LIBS)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sxd-libs
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
$(SXD_LIBS)_DEPENDS += $(SX_COMPLIB_DEV) $(SX_GEN_UTILS_DEV)
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SXD_LIBS_DEV = sxd-libs-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(SXD_LIBS),$(SXD_LIBS_DEV)))
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SXD_LIBS_DBGSYM = sxd-libs-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SXD_LIBS),$(SXD_LIBS_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
Add python api to mlnx SDK (#110) * Add python api to mlnx SDK * Update sdk.mk * Add runtime dependency on python api Python SX SDK API is not required for build, however it is useful package to have in syncd docker
2016-12-08 12:31:02 -06:00
#packages that are required for runtime only
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
PYTHON_SDK_API = python-sdk-api_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
$(PYTHON_SDK_API)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/python-sdk-api
[mellanox]: Fixed SDK build: added missing SWIG dependency. (#2914) Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-05-17 15:45:33 -05:00
$(PYTHON_SDK_API)_DEPENDS += $(APPLIBS_DEV) $(SXD_LIBS_DEV) $(SWIG)
[docker-saiserver]: build docker-saiserver (#2244) * build docker-saiserver Signed-off-by: Guohan Lu <gulv@microsoft.com> * add docker saiserver mlnx/bfn/cavm * set nephos to 1.3.5 Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-11-14 03:15:31 -06:00
$(PYTHON_SDK_API)_RDEPENDS += $(APPLIBS) $(SXD_LIBS)
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
PYTHON_SDK_API_DBGSYM = python-sdk-api-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(PYTHON_SDK_API),$(PYTHON_SDK_API_DBGSYM)))
endif
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_ACL_HELPER = sx-acl-helper_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
$(SX_ACL_HELPER)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-acl-helper
$(SX_ACL_HELPER)_DEPENDS += $(SX_COMPLIB_DEV) $(SXD_LIBS_DEV) $(APPLIBS_DEV)
$(SX_ACL_HELPER)_RDEPENDS += $(SX_COMPLIB) $(PYTHON_SDK_API)
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_ACL_HELPER_DEV = sx-acl-helper-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
$(eval $(call add_derived_package,$(SX_ACL_HELPER),$(SX_ACL_HELPER_DEV)))
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_ACL_HELPER_DBGSYM = sx-acl-helper-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_ACL_HELPER),$(SX_ACL_HELPER_DBGSYM)))
endif
[Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <kebol@nvidia.com>
2023-08-15 07:32:52 -05:00
SX_OBJ_DESC_LIB = sx-obj-desc-lib_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
$(SX_OBJ_DESC_LIB)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-obj-desc-lib
$(SX_OBJ_DESC_LIB)_DEPENDS += $(APPLIBS_DEV) $(SX_COMPLIB_DEV) $(SXD_LIBS_DEV)
$(SX_OBJ_DESC_LIB)_RDEPENDS += $(APPLIBS) $(SX_COMPLIB) $(PYTHON_SDK_API)
SX_OBJ_DESC_LIB_DEV = sx-obj-desc-lib-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
$(eval $(call add_derived_package,$(SX_OBJ_DESC_LIB),$(SX_OBJ_DESC_LIB_DEV)))
SX_OBJ_DESC_LIB_DBGSYM = sx-obj-desc-lib-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_OBJ_DESC_LIB),$(SX_OBJ_DESC_LIB_DBGSYM)))
endif
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
WJH_LIBS = wjh-libs_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[submodule] update sonic-linux-kernel (#2985) * [submodule] update sonic-linux-kernel * update linux kernel version * Fix many version strings * update mellanox components (built with new kernel) * [mlnx] add make files for SDK WJH libs * Update arista driver submodule (#8) Make the debian packaging point to a newer kernel version.
2019-06-18 12:00:16 -05:00
$(WJH_LIBS)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/wjh-libs
[Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096) SONiC changes: 1. Support Spectrum4 ASIC FW binary building. 2. Support new SDK sx-obj-desc lib building since new SAI need it. 3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead). 4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3 SDK/FW bug fixes 1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes. 2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail. SDK/FW Features 1. On SN2700 all ports can support y cable by credo SAI bug Fixes 1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix 2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable 3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE SAI features 1. Port init profile - How I did it Update SDK/FW/SAI make files - How to verify it Run full sonic-mgmt regression on Mellanox platform Signed-off-by: Kebo Liu <kebol@nvidia.com>
2023-08-15 07:32:52 -05:00
$(WJH_LIBS)_DEPENDS += $(SX_COMPLIB_DEV) $(SXD_LIBS_DEV) $(APPLIBS_DEV) $(SX_ACL_HELPER_DEV)
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
$(WJH_LIBS)_RDEPENDS += $(SX_COMPLIB) $(PYTHON_SDK_API) $(SX_ACL_HELPER)
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
WJH_LIBS_DEV = wjh-libs-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[submodule] update sonic-linux-kernel (#2985) * [submodule] update sonic-linux-kernel * update linux kernel version * Fix many version strings * update mellanox components (built with new kernel) * [mlnx] add make files for SDK WJH libs * Update arista driver submodule (#8) Make the debian packaging point to a newer kernel version.
2019-06-18 12:00:16 -05:00
$(eval $(call add_derived_package,$(WJH_LIBS),$(WJH_LIBS_DEV)))
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
WJH_LIBS_DBGSYM = wjh-libs-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(WJH_LIBS),$(WJH_LIBS_DBGSYM)))
endif
[Mellanox] Add SDK hash calculator debian and update SDK makefile to compile it (#12840) - Why I did it Add SDK hash calculator Debian and update SDK makefile to compile it. - How I did it SDK hash calculator Debian will be used by ECMP calculator (PR #12482) - How to verify it Compile sonic-buildimage and verify SDK hash calculator Debian exist in target folder.
2022-11-28 05:30:40 -06:00
SX_HASH_CALC = sx-hash-calc_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(SX_HASH_CALC)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-hash-calc
$(SX_HASH_CALC)_DEPENDS += $(SX_COMPLIB_DEV) $(SXD_LIBS_DEV) $(APPLIBS_DEV) $(SX_GEN_UTILS_DEV)
$(SX_HASH_CALC)_RDEPENDS += $(SX_COMPLIB) $(SXD_LIBS) $(APPLIBS)
SX_HASH_CALC_DBGSYM = sx-hash-calc-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_HASH_CALC),$(SX_HASH_CALC_DBGSYM)))
endif
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_KERNEL = sx-kernel_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
$(SX_KERNEL)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON)
$(SX_KERNEL)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-kernel
[Mellanox] Add arm64 architecture support to mellanox platform (#11342) - Why I did it Add support for mellanox platform building for target architecture arm64. - How I did it Contains the following changes: 1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH) 2. Add logic to download correct binary for MFT package 3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader - How to verify it Build mellanox platform with TARGET_ARCH set as arm64
2022-07-13 08:21:33 -05:00
SX_KERNEL_DEV = sx-kernel-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_$(CONFIGURED_ARCH).deb
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
$(eval $(call add_derived_package,$(SX_KERNEL),$(SX_KERNEL_DEV)))
[submodule] update sonic-linux-kernel (#2985) * [submodule] update sonic-linux-kernel * update linux kernel version * Fix many version strings * update mellanox components (built with new kernel) * [mlnx] add make files for SDK WJH libs * Update arista driver submodule (#8) Make the debian packaging point to a newer kernel version.
2019-06-18 12:00:16 -05:00
[Mellanox] update sdk/fw build procedure (#14025) - Why I did it To optimize Mellanox platform build - How I did it sdk debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release sx kernel is downloaded as zip from Spectrum-SDK-Drivers - How to verify it configure/build for Mellanox platform Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
2023-03-02 01:48:47 -06:00
define make_url
$(1)_URL = $(MLNX_SDK_ASSETS_URL)/$(1)
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
endef
[Mellanox] update sdk/fw build procedure (#14025) - Why I did it To optimize Mellanox platform build - How I did it sdk debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release sx kernel is downloaded as zip from Spectrum-SDK-Drivers - How to verify it configure/build for Mellanox platform Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
2023-03-02 01:48:47 -06:00
$(eval $(foreach deb,$(MLNX_SDK_DEBS) $(MLNX_SDK_RDEBS) $(PYTHON_SDK_API),$(call make_url,$(deb))))
[mellanox] build SDK driver from open source (#3580) * build SDK driver package sx-kernel from open sourced repository Mellanox/Switch-SDK-driver * copy SDK packages and FW binaries from Mellanox/Switch-SDK-driver Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-10-08 09:57:13 -05:00
SONIC_MAKE_DEBS += $(SX_KERNEL)
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifeq ($(SDK_FROM_SRC), y)
[mellanox] build SDK driver from open source (#3580) * build SDK driver package sx-kernel from open sourced repository Mellanox/Switch-SDK-driver * copy SDK packages and FW binaries from Mellanox/Switch-SDK-driver Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-10-08 09:57:13 -05:00
SONIC_MAKE_DEBS += $(MLNX_SDK_RDEBS) $(PYTHON_SDK_API)
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
else
[Mellanox] update sdk/fw build procedure (#14025) - Why I did it To optimize Mellanox platform build - How I did it sdk debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release sx kernel is downloaded as zip from Spectrum-SDK-Drivers - How to verify it configure/build for Mellanox platform Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
2023-03-02 01:48:47 -06:00
SONIC_ONLINE_DEBS += $(MLNX_SDK_RDEBS) $(PYTHON_SDK_API)
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
endif
mlnx-sdk-packages: $(addprefix $(DEBS_PATH)/, $(MLNX_SDK_RDEBS) $(PYTHON_SDK_API) $(SX_KERNEL))
SONIC_PHONY_TARGETS += mlnx-sdk-packages
Reference in New Issue Copy Permalink