matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
e45ff4edb4
sonic-buildimage/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.install

18 lines
880 B
Plaintext
Raw Normal View History

[platform]: move dell platform modules into buildimage repo Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-13 05:31:11 -05:00
s6100/scripts/iom_power_*.sh usr/local/bin
s6100/scripts/s6100_platform.sh usr/local/bin
common/dell_i2c_utils.sh usr/local/bin
[devices]: Address Dell issue#46 : Adding MUX reset logic to fix probe failures (#2356)
2019-01-08 17:27:16 -06:00
common/io_rd_wr.py usr/local/bin
[sonic-platform-modules-dell] Graceful platform reboot (#2912) The following commit addresses the graceful unmounting of file system and graceful shutdown of dockers before calling a cold reboot which will cause a power cycle of SSD. This ensures orderly shutdown and no corruption of files systems because of the power cycle to SSD. This commit will use the existing systemd-reboot service scripts and override the configuration to do cold reboot for S6100 and Z9100. Unit tested the fix and graceful shutdown of file system and dockers are done with cold reboot. Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
2019-07-23 17:26:58 -05:00
s6100/scripts/platform_reboot_override usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
s6100/scripts/override.conf /etc/systemd/system/systemd-reboot.service.d
[devices]: Poller to detect Intel Rangely LPC failure for dell z9100/s6100 (#3065) - What I did Added Daemon to Log LPC bus degradation in Intel C2000 processor. Intel Rangeley C2000 processors with revision less than or equal to 2 have issue where LPC bus degrades over time in some processors. To identify the problem and to notify the issue, a daemon has been added which will log on encountering the issue. - How I did it Added a daemon which validates the CPLD scratch(0x102) and SMF scratch(0x202) registers by writing and reading values on regular polling intervals (300 seconds). If there is a discrepancy between read and write, a critical log will be thrown. - How to verify it The infra is verify by simulating the issue where between write and read, the value in register is modified and the log appearance is checked. - Description for the changelog Added Daemon to identify LPC bus degradation issue and notify using syslog in Dell S6100 and Z9100 platforms. This daemon will only run on processors with revision less than or equal to 2.
2019-06-24 10:13:40 -05:00
common/dell_lpc_mon.sh usr/local/bin
[platform]: move dell platform modules into buildimage repo Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-13 05:31:11 -05:00
s6100/scripts/platform_sensors.py usr/local/bin
[devices]: DELL Platform 2.0 API Infra and Reboot Reason support in Z9100 & S6100 (#3063)
2019-07-03 08:52:35 -05:00
s6100/modules/sonic_platform-1.0-py2-none-any.whl usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
[devices]: DellEMC S6100 Watchdog support (#2835)
2019-06-29 01:47:36 -05:00
s6100/scripts/platform_watchdog_enable.sh usr/local/bin
s6100/scripts/platform_watchdog_disable.sh usr/local/bin
[platform]: move dell platform modules into buildimage repo Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-13 05:31:11 -05:00
s6100/scripts/sensors usr/bin
[devices]: Dell-S6100/Z9100 depmod fixes (#2071)
2018-09-26 01:14:09 -05:00
s6100/systemd/platform-modules-s6100.service etc/systemd/system
[devices]: Poller to detect Intel Rangely LPC failure for dell z9100/s6100 (#3065) - What I did Added Daemon to Log LPC bus degradation in Intel C2000 processor. Intel Rangeley C2000 processors with revision less than or equal to 2 have issue where LPC bus degrades over time in some processors. To identify the problem and to notify the issue, a daemon has been added which will log on encountering the issue. - How I did it Added a daemon which validates the CPLD scratch(0x102) and SMF scratch(0x202) registers by writing and reading values on regular polling intervals (300 seconds). If there is a discrepancy between read and write, a critical log will be thrown. - How to verify it The infra is verify by simulating the issue where between write and read, the value in register is modified and the log appearance is checked. - Description for the changelog Added Daemon to identify LPC bus degradation issue and notify using syslog in Dell S6100 and Z9100 platforms. This daemon will only run on processors with revision less than or equal to 2.
2019-06-24 10:13:40 -05:00
s6100/systemd/s6100-lpc-monitor.service etc/systemd/system
BIOS upgrade support with API2.0 for DellEMC S6100 (#3116)
2019-08-23 13:12:26 -05:00
tools/flashrom/flashrom usr/local/bin/
[devices]: Firmware upgrade support for DellEMC platforms(s5248,s5232,z9100,s6100,z9264f) (#3743) * This method is used to update firmware components such as CPLD,FPGA,BIOS,SMF * This uses ONIE firmware upgrade design to stage firmware update from NOS. a) Copy latest firmware updater image to target running sonic. b) Run “./fw-updater -u onie-firmware-x86_64-dellemc_s5200_c3538-r0.3.40.5.1-9.bin”. c) This would automatically reboot ONIE into update mode and update firmware components to latest and reboot back to sonic without any user intervention. Signed-off-by: Srideep Devireddy <srideep_devireddy@dell.com>
2019-11-14 02:08:15 -06:00
common/fw-updater usr/local/bin
[DellEMC]: utility to set onie modes from NOS (#3860) This common utility would set next boot option as onie mode and when reboot is triggered it would reboot the box into that specific onie mode. Current support modes are rescue/install/uninstall
2019-12-10 17:13:25 -06:00
common/onie_mode_set usr/local/bin
Reference in New Issue Copy Permalink