matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
df28eceb35
sonic-buildimage/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-psu-monitor

329 lines
11 KiB
Plaintext
Raw Normal View History

[Wistron] Add 6512-32r platform support (#10956) Why I did it Add 6512-32r support for Wistron platform Update sw-to3200k for newer branch How I did it Add code in device and platform folder for 6512-32r Update sw-to3200k code both in device and platform folder How to verify it Install on Wistron device and run command to verify Signed-off-by: RogerChang Roger_Chang@wistron.com
2022-06-30 11:13:56 -05:00
#!/bin/bash
result=0
debug_flag=0
bmc_fan_duty_cycle_ctrl()
{
#control PSU 1
fan_pwm_input=$(cat /sys/bus/i2c/devices/0-005a/psu_fan1_duty_cycle | awk '{print $1}')
lo_byte_1= $((fan_pwm_input & 0xff))
hi_byte_1= $((fan_pwm_input >> 8))
#control PSU 2
fan_pwm_input=$(cat /sys/bus/i2c/devices/0-0059/psu_fan1_duty_cycle | awk '{print $1}')
lo_byte_2= $((fan_pwm_input & 0xff))
hi_byte_2= $((fan_pwm_input >> 8))
ipmitool raw 0x30 0x95 hi_byte_1 lo_byte_1 hi_byte_2 lo_byte_2
return 1
}
byte_read(){
data=$(echo $val | awk '{print $'"$1"'}')
data=$(printf "%d" 0x$data)
Value=$data
return 1
}
add_byte(){
hi_byte=$(echo $val | awk '{print $'"$1"'}')
lo_byte=$(echo $val | awk '{print $'"$2"'}')
hi_byte=$(printf "%d" 0x$hi_byte)
lo_byte=$(printf "%d" 0x$lo_byte)
((hi_byte <<= 8))
Value=$(($lo_byte+$hi_byte))
return 1
}
# string_read [start byte] [length]
string_read(){
Value=""
seqnum=$(($1+$2-1))
for i in $(seq $1 $seqnum)
do
data=$(echo $val | awk '{print $'"$i"'}')
data=$(printf "%d" 0x$data)
if [ $data -ne 0 ];then
Value=$Value$(printf "$(printf '\\x%x' $data)")
else
data=0x20
Value=$Value$(printf "$(printf '\\x%x' $data)")
fi
done
return 1
}
#$1=dev_addr, $2=reg, $3=val
get_PSU_information()
{
val=$(ipmitool raw 0x30 0x93 2>>/dev/null)
#####################################################################################
# BMC_command content resultfile algorithm #
# 93 2:5 vin 5a/59 psu_v_in LINEAR_11 #
# 93 6:9 vout 5a/59 psu_v_out LINEAR_16 #
# 93 10:13 Iin 5a/59 psu_i_in LINEAR_11 #
# 93 14:17 Iout 5a/59 psu_i_out LINEAR_11 #
# 93 18:21 Pin 5a/59 psu_p_in LINEAR_11 #
# 93 22:25 Pout 5a/59 psu_p_out LINEAR_11 #
# 93 26:27 temp1 5a/59 psu_temp1_input #
# 93 28:29 temp2 DISCARD #
# 93 30:31 temp3 DISCARD #
# 93 32:33 fan_fault 5a/59 psu_fan1_fault #
# 93 34:37 fan_command 5a/59 psu_fan1_duty_cycle #
# 93 38:41 fan_speed 5a/59 psu_fan1_speed_rpm LINEAR_11 #
# 93 42:43 psu_present 52/51 psu_present #
# 93 44:45 power_good 52/51 psu_power_good #
# 94 2:23 mfr_ID 5a/59 psu_mfr_id #
# 94 24:45 mfr_model 5a/59 psu_mfr_model #
# 94 46:49 mfr_rev 5a/59 psu_mfr_revision #
# 94 50:97 mfr_serial 5a/59 psu_mfr_serial #
# TBD pmbus_rev. 5a/59 psu_pmbus_revision #
# 98 2:21 psu_model_name 52/51 psu_model_name #
# 98 22:59 psu_serial 52/51 psu_serial_number #
#####################################################################################
#_______________________with _LINEAR11&16 VIN IIN IOUT PIN POUT FAN_SPEED with _LINEAR16 VOUT
if [ -e /sys/bus/i2c/devices/0-005a/psu_mfr_id ] && [ -e /sys/bus/i2c/devices/0-0059/psu_mfr_id ];then
#PSU1 Vin
add_byte 1 2
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_v_in
fi
#PSU2 Vin
add_byte 3 4
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_v_in
fi
#PSU 1 Vout
add_byte 5 6
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_v_out
fi
#PSU 2 Vout
add_byte 7 8
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_v_out
fi
#PSU 1 Iin
add_byte 9 10
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_i_in
fi
#PSU 2 Iin
add_byte 11 12
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_i_in
fi
#PSU 1 Iout
add_byte 13 14
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_i_out
fi
#PSU 2 Iout
add_byte 15 16
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_i_out
fi
#PSU 1 Pin
add_byte 17 18
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_p_in
fi
#PSU 2 Pin
add_byte 19 20
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_p_in
fi
#PSU 1 Pout
add_byte 21 22
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_p_out
fi
#PSU 2 Pout
add_byte 23 24
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_p_out
fi
#PSU 1 Fan speed
add_byte 37 38
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_fan1_speed_rpm
fi
#PSU 2 Fan speed
add_byte 39 40
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_fan1_speed_rpm
fi
#_______________________with _LINEAR11&16 VIN IIN IOUT PIN POUT FAN_SPEED with _LINEAR16 VOUT
#----------------93->/58/59----psu_fan1_fault psu_temp1_input psu_fan1_duty_cycle
#PSU 1 Temp1
byte_read 25
echo $Value > /sys/bus/i2c/devices/0-005a/psu_temp1_input
#PSU 2 Temp1
byte_read 26
echo $Value > /sys/bus/i2c/devices/0-0059/psu_temp1_input
if [ $debug_flag -eq 0 ];then
#PSU 1 Fan command
add_byte 33 34
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_fan1_duty_cycle
fi
#PSU 2 Fan command
add_byte 35 36
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_fan1_duty_cycle
fi
fi
#PSU 1 2 Fan status check fault(0x81,bit 7, 0 for ignormal)
byte_read 31
((Value >>= 7))
echo $Value > /sys/bus/i2c/devices/0-005a/psu_fan1_fault
#PSU 2 Fan status check fault(0x81,bit 7, 0 for ignormal)
byte_read 32
((Value >>= 7))
echo $Value > /sys/bus/i2c/devices/0-0059/psu_fan1_fault
fi
#____________________________________
#----------------93->/50/51
if [ -e /sys/bus/i2c/devices/0-0051/psu_serial_number ] && [ -e /sys/bus/i2c/devices/0-0052/psu_serial_number ];then
#PSU 1 2 PSU present
byte_read 41
if [ $Value -eq 0 ];then
Value=1
else
Value=0
fi
echo $Value > /sys/bus/i2c/devices/0-0052/psu_present
byte_read 42
if [ $Value -eq 0 ];then
Value=1
else
Value=0
fi
echo $Value > /sys/bus/i2c/devices/0-0051/psu_present
#PSU 1 2 PSU power good
byte_read 43
echo $Value > /sys/bus/i2c/devices/0-0052/psu_power_good
byte_read 44
echo $Value > /sys/bus/i2c/devices/0-0051/psu_power_good
fi
#____________________________________________________________________________
val=$(ipmitool raw 0x30 0x94 2>>/dev/null)
#----------------94->/58/59
if [ -e /sys/bus/i2c/devices/0-005a/psu_mfr_id ] && [ -e /sys/bus/i2c/devices/0-0059/psu_mfr_id ];then
#PSU1 mfr_ID
string_read 1 11
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_mfr_id
fi
#PSU2 mfr_ID
string_read 12 11
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_mfr_id
fi
#PSU1 mfr_model
string_read 23 11
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_mfr_model
fi
#PSU2 mfr_model
string_read 34 11
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_mfr_model
fi
#PSU1 mfr_revision
string_read 45 2
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_mfr_revision
fi
#PSU2 mfr_revision
string_read 47 2
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_mfr_revision
fi
#PSU1 mfr_serial
string_read 49 24
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-005a/psu_mfr_serial
fi
#PSU1 mfr_serial
string_read 73 24
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0059/psu_mfr_serial
fi
fi
#____________________________________________________________________________
#----------------98->/50/51
val=$(ipmitool raw 0x30 0x98 2>>/dev/null)
if [ -e /sys/bus/i2c/devices/0-0051/psu_serial_number ] && [ -e /sys/bus/i2c/devices/0-0052/psu_serial_number ];then
#PSU 1 psu_model_name
string_read 1 10
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0052/psu_model_name
fi
if [ "$(echo $Value |cut -c 5)" == 8 ];then #"082" for f2b "095" for b2f
echo 0 > /sys/bus/i2c/devices/0-0052/psu_fan_dir
else
echo 1 > /sys/bus/i2c/devices/0-0052/psu_fan_dir
fi
#PSU 2 psu_model_name
string_read 11 10
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0051/psu_model_name
fi
if [ "$(echo $Value |cut -c 5)" == 8 ];then #"082" for f2b "095" for b2f
echo 0 > /sys/bus/i2c/devices/0-0051/psu_fan_dir
else
echo 1 > /sys/bus/i2c/devices/0-0051/psu_fan_dir
fi
if [ $(cat /sys/bus/i2c/devices/0-0052/psu_present) -eq 1 ];then
fan_dir=$(cat /sys/bus/i2c/devices/0-0052/psu_fan_dir)
else
fan_dir=$(cat /sys/bus/i2c/devices/0-0051/psu_fan_dir)
fi
echo $fan_dir > /sys/bus/i2c/devices/0-0066/fan1_direction
echo $fan_dir > /sys/bus/i2c/devices/0-0066/fan2_direction
echo $fan_dir > /sys/bus/i2c/devices/0-0066/fan3_direction
echo $fan_dir > /sys/bus/i2c/devices/0-0066/fan4_direction
echo $fan_dir > /sys/bus/i2c/devices/0-0066/fan5_direction
echo $fan_dir > /sys/bus/i2c/devices/0-0066/fan6_direction
echo $fan_dir > /sys/bus/i2c/devices/0-0066/fan7_direction
#PSU 1 psu_serial_number
string_read 21 19
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0052/psu_serial_number
fi
#PSU 2 psu_serial_number
string_read 40 19
if [ $? -eq 1 ];then
echo $Value > /sys/bus/i2c/devices/0-0051/psu_serial_number
fi
fi
#_____________________________________________
}
#$1=dev_addr, $2=reg, $3=len
PSU_monitor()
{
while true
do
get_PSU_information
if [ $debug_flag -eq 1 ];then
bmc_fan_speed_ctrl
fi
sleep 1
done
}
PSU_monitor
Reference in New Issue Copy Permalink