matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
dab4e68722
sonic-buildimage/device/arista/x86_64-arista_7060dx4_32/platform.json

947 lines
28 KiB
JSON
Raw Normal View History

Add platform.json to Arista platforms (#6150) platform.json is needed for sonic-mgmt testing. Also in the future it will be used as part of dynamic port breakout. Also removed the folder symlink for BlackhawkDD because it has a different platform.json than BlackhawkO. Co-authored-by: Zhi Yuan Carl Zhao <zyzhao@arista.com>
2020-12-08 12:20:13 -06:00
{
"chassis": {
"name": "DCS-7060DX4-32",
"components": [],
"fans": [],
"fan_drawers": [
{
"name": "slot1",
"fans": [
{
"name": "fan1"
}
]
},
{
"name": "slot2",
"fans": [
{
"name": "fan2"
}
]
},
{
"name": "slot3",
"fans": [
{
"name": "fan3"
}
]
},
{
"name": "slot4",
"fans": [
{
"name": "fan4"
}
]
},
{
"name": "slot5",
"fans": [
{
"name": "fan5"
}
]
}
],
"psus": [
{
"name": "psu1",
"fans": []
},
{
"name": "psu2",
"fans": []
}
],
"thermals": [
{
"name": "Board sensor"
},
{
"name": "Switch board middle sensor"
},
{
"name": "Switch board left sensor"
},
{
"name": "Front-panel temp sensor"
},
{
"name": "Switch chip diode 1 sensor"
},
{
"name": "Switch chip diode 2 sensor"
},
{
"name": "PCH temp sensor"
},
{
"name": "Physical id 0"
},
{
"name": "CPU core0 temp sensor"
},
{
"name": "CPU core1 temp sensor"
},
{
"name": "CPU board temp sensor"
},
{
"name": "Back-panel temp sensor"
},
{
"name": "Front-panel temp sensor"
},
{
"name": "Power supply 1 hotspot sensor"
},
{
"name": "Power supply 1 inlet temp sensor"
},
{
"name": "Power supply 1 exhaust temp sensor"
},
{
"name": "Power supply 2 hotspot sensor"
},
{
"name": "Power supply 2 inlet temp sensor"
},
{
"name": "Power supply 2 exhaust temp sensor"
}
],
"sfps": [
{
"name": "osfp1"
},
{
"name": "osfp2"
},
{
"name": "osfp3"
},
{
"name": "osfp4"
},
{
"name": "osfp5"
},
{
"name": "osfp6"
},
{
"name": "osfp7"
},
{
"name": "osfp8"
},
{
"name": "osfp9"
},
{
"name": "osfp10"
},
{
"name": "osfp11"
},
{
"name": "osfp12"
},
{
"name": "osfp13"
},
{
"name": "osfp14"
},
{
"name": "osfp15"
},
{
"name": "osfp16"
},
{
"name": "osfp17"
},
{
"name": "osfp18"
},
{
"name": "osfp19"
},
{
"name": "osfp20"
},
{
"name": "osfp21"
},
{
"name": "osfp22"
},
{
"name": "osfp23"
},
{
"name": "osfp24"
},
{
"name": "osfp25"
},
{
"name": "osfp26"
},
{
"name": "osfp27"
},
{
"name": "osfp28"
},
{
"name": "osfp29"
},
{
"name": "osfp30"
},
{
"name": "osfp31"
},
{
"name": "osfp32"
},
{
"name": "sfp33"
},
{
"name": "sfp34"
}
]
},
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
"interfaces": {
"Ethernet0": {
"index": "1,1,1,1,1,1,1,1",
"lanes": "1,2,3,4,5,6,7,8",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet1/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet1/1",
"Ethernet1/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet1/1",
"Ethernet1/3",
"Ethernet1/5",
"Ethernet1/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet1/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet8": {
"index": "2,2,2,2,2,2,2,2",
"lanes": "9,10,11,12,13,14,15,16",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet2/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet2/1",
"Ethernet2/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet2/1",
"Ethernet2/3",
"Ethernet2/5",
"Ethernet2/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet2/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet16": {
"index": "3,3,3,3,3,3,3,3",
"lanes": "17,18,19,20,21,22,23,24",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet3/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet3/1",
"Ethernet3/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet3/1",
"Ethernet3/3",
"Ethernet3/5",
"Ethernet3/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet3/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet24": {
"index": "4,4,4,4,4,4,4,4",
"lanes": "25,26,27,28,29,30,31,32",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet4/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet4/1",
"Ethernet4/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet4/1",
"Ethernet4/3",
"Ethernet4/5",
"Ethernet4/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet4/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet32": {
"index": "5,5,5,5,5,5,5,5",
"lanes": "33,34,35,36,37,38,39,40",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet5/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet5/1",
"Ethernet5/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet5/1",
"Ethernet5/3",
"Ethernet5/5",
"Ethernet5/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet5/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet40": {
"index": "6,6,6,6,6,6,6,6",
"lanes": "41,42,43,44,45,46,47,48",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet6/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet6/1",
"Ethernet6/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet6/1",
"Ethernet6/3",
"Ethernet6/5",
"Ethernet6/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet6/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet48": {
"index": "7,7,7,7,7,7,7,7",
"lanes": "49,50,51,52,53,54,55,56",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet7/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet7/1",
"Ethernet7/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet7/1",
"Ethernet7/3",
"Ethernet7/5",
"Ethernet7/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet7/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet56": {
"index": "8,8,8,8,8,8,8,8",
"lanes": "57,58,59,60,61,62,63,64",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet8/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet8/1",
"Ethernet8/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet8/1",
"Ethernet8/3",
"Ethernet8/5",
"Ethernet8/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet8/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet64": {
"index": "9,9,9,9,9,9,9,9",
"lanes": "65,66,67,68,69,70,71,72",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet9/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet9/1",
"Ethernet9/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet9/1",
"Ethernet9/3",
"Ethernet9/5",
"Ethernet9/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet9/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet72": {
"index": "10,10,10,10,10,10,10,10",
"lanes": "73,74,75,76,77,78,79,80",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet10/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet10/1",
"Ethernet10/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet10/1",
"Ethernet10/3",
"Ethernet10/5",
"Ethernet10/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet10/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet80": {
"index": "11,11,11,11,11,11,11,11",
"lanes": "81,82,83,84,85,86,87,88",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet11/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet11/1",
"Ethernet11/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet11/1",
"Ethernet11/3",
"Ethernet11/5",
"Ethernet11/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet11/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet88": {
"index": "12,12,12,12,12,12,12,12",
"lanes": "89,90,91,92,93,94,95,96",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet12/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet12/1",
"Ethernet12/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet12/1",
"Ethernet12/3",
"Ethernet12/5",
"Ethernet12/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet12/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet96": {
"index": "13,13,13,13,13,13,13,13",
"lanes": "97,98,99,100,101,102,103,104",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet13/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet13/1",
"Ethernet13/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet13/1",
"Ethernet13/3",
"Ethernet13/5",
"Ethernet13/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet13/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet104": {
"index": "14,14,14,14,14,14,14,14",
"lanes": "105,106,107,108,109,110,111,112",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet14/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet14/1",
"Ethernet14/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet14/1",
"Ethernet14/3",
"Ethernet14/5",
"Ethernet14/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet14/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet112": {
"index": "15,15,15,15,15,15,15,15",
"lanes": "113,114,115,116,117,118,119,120",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet15/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet15/1",
"Ethernet15/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet15/1",
"Ethernet15/3",
"Ethernet15/5",
"Ethernet15/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet15/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet120": {
"index": "16,16,16,16,16,16,16,16",
"lanes": "121,122,123,124,125,126,127,128",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet16/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet16/1",
"Ethernet16/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet16/1",
"Ethernet16/3",
"Ethernet16/5",
"Ethernet16/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet16/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet128": {
"index": "17,17,17,17,17,17,17,17",
"lanes": "129,130,131,132,133,134,135,136",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet17/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet17/1",
"Ethernet17/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet17/1",
"Ethernet17/3",
"Ethernet17/5",
"Ethernet17/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet17/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet136": {
"index": "18,18,18,18,18,18,18,18",
"lanes": "137,138,139,140,141,142,143,144",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet18/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet18/1",
"Ethernet18/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet18/1",
"Ethernet18/3",
"Ethernet18/5",
"Ethernet18/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet18/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet144": {
"index": "19,19,19,19,19,19,19,19",
"lanes": "145,146,147,148,149,150,151,152",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet19/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet19/1",
"Ethernet19/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet19/1",
"Ethernet19/3",
"Ethernet19/5",
"Ethernet19/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet19/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet152": {
"index": "20,20,20,20,20,20,20,20",
"lanes": "153,154,155,156,157,158,159,160",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet20/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet20/1",
"Ethernet20/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet20/1",
"Ethernet20/3",
"Ethernet20/5",
"Ethernet20/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet20/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet160": {
"index": "21,21,21,21,21,21,21,21",
"lanes": "161,162,163,164,165,166,167,168",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet21/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet21/1",
"Ethernet21/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet21/1",
"Ethernet21/3",
"Ethernet21/5",
"Ethernet21/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet21/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet168": {
"index": "22,22,22,22,22,22,22,22",
"lanes": "169,170,171,172,173,174,175,176",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet22/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet22/1",
"Ethernet22/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet22/1",
"Ethernet22/3",
"Ethernet22/5",
"Ethernet22/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet22/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet176": {
"index": "23,23,23,23,23,23,23,23",
"lanes": "177,178,179,180,181,182,183,184",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet23/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet23/1",
"Ethernet23/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet23/1",
"Ethernet23/3",
"Ethernet23/5",
"Ethernet23/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet23/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet184": {
"index": "24,24,24,24,24,24,24,24",
"lanes": "185,186,187,188,189,190,191,192",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet24/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet24/1",
"Ethernet24/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet24/1",
"Ethernet24/3",
"Ethernet24/5",
"Ethernet24/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet24/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet192": {
"index": "25,25,25,25,25,25,25,25",
"lanes": "193,194,195,196,197,198,199,200",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet25/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet25/1",
"Ethernet25/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet25/1",
"Ethernet25/3",
"Ethernet25/5",
"Ethernet25/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet25/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet200": {
"index": "26,26,26,26,26,26,26,26",
"lanes": "201,202,203,204,205,206,207,208",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet26/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet26/1",
"Ethernet26/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet26/1",
"Ethernet26/3",
"Ethernet26/5",
"Ethernet26/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet26/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet208": {
"index": "27,27,27,27,27,27,27,27",
"lanes": "209,210,211,212,213,214,215,216",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet27/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet27/1",
"Ethernet27/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet27/1",
"Ethernet27/3",
"Ethernet27/5",
"Ethernet27/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet27/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet216": {
"index": "28,28,28,28,28,28,28,28",
"lanes": "217,218,219,220,221,222,223,224",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet28/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet28/1",
"Ethernet28/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet28/1",
"Ethernet28/3",
"Ethernet28/5",
"Ethernet28/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet28/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet224": {
"index": "29,29,29,29,29,29,29,29",
"lanes": "225,226,227,228,229,230,231,232",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet29/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet29/1",
"Ethernet29/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet29/1",
"Ethernet29/3",
"Ethernet29/5",
"Ethernet29/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet29/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet232": {
"index": "30,30,30,30,30,30,30,30",
"lanes": "233,234,235,236,237,238,239,240",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet30/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet30/1",
"Ethernet30/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet30/1",
"Ethernet30/3",
"Ethernet30/5",
"Ethernet30/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet30/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet240": {
"index": "31,31,31,31,31,31,31,31",
"lanes": "241,242,243,244,245,246,247,248",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet31/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet31/1",
"Ethernet31/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet31/1",
"Ethernet31/3",
"Ethernet31/5",
"Ethernet31/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet31/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet248": {
"index": "32,32,32,32,32,32,32,32",
"lanes": "249,250,251,252,253,254,255,256",
"breakout_modes": {
"1x400G[200G,100G,50G,40G,25G,10G]": [
"Ethernet32/1"
],
"2x200G[100G,50G,40G,25G,10G]": [
"Ethernet32/1",
"Ethernet32/5"
],
"4x100G[50G,40G,25G,10G]": [
"Ethernet32/1",
"Ethernet32/3",
"Ethernet32/5",
"Ethernet32/7"
[Arista] Add 1x100G over 4 lanes configuration for 7060DX4 (#10655) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com>
2022-04-25 10:11:32 -05:00
],
"1x100G(4)": [
"Ethernet32/1"
[Arista] Add dynamic port breakout hwsku to platforms (#7975) Co-authored-by: Zhi Yuan (Carl) Zhao <zyzhao@arista.com> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
2021-08-16 09:03:50 -05:00
]
}
},
"Ethernet256": {
"index": "33",
"lanes": "258",
"breakout_modes": {
"1x10G": [
"Ethernet33"
]
}
},
"Ethernet260": {
"index": "34",
"lanes": "257",
"breakout_modes": {
"1x10G": [
"Ethernet34"
]
}
}
}
Add platform.json to Arista platforms (#6150) platform.json is needed for sonic-mgmt testing. Also in the future it will be used as part of dynamic port breakout. Also removed the folder symlink for BlackhawkDD because it has a different platform.json than BlackhawkO. Co-authored-by: Zhi Yuan Carl Zhao <zyzhao@arista.com>
2020-12-08 12:20:13 -06:00
}
Reference in New Issue Copy Permalink