sonic-buildimage/device/arista/x86_64-arista_7050px4_32s/platform_env.conf

SYNCD_SHM_SIZE=512m
is_ltsw_chip=1
[broadcom]: Set default SYNCD_SHM_SIZE for Broadcom XGS devices (#13297) After upgrade to brcmsai 8.1, the sdk running environment (container) recommended with mininum memory size as below TH4/TD4(ltsw) uses 512MB TH3 used 300MB Helix4/TD2/TD3/TH/TH 256 MB Base on this requirement, adjust the default syncd share memory size and set the memory size for special ACISs in platform_env.conf file for different types of Broadcom ASICs. How I did it Add the platform_env.conf file if none of it for broadcom platform (base on platform_asic file) Add the 'SYNCD_SHM_SIZE' and set the value for ltsw(TD4/TH4) devices set to 512M at least (update the platform_env.conf) for Td2/TH2/TH devices set to 256M for TH3 set to 300M verify How to verify it verify the image with code fix Check with UT Check on lab devices On a problematic device which cannot start successfully Run with the command $ cat /proc/linux-kernel-bde Broadcom Device Enumerator (linux-kernel-bde) Module parameters: maxpayload=128 usemsi=0 dmasize=32M himem=(null) himemaddr=(null) DMA Memory (kernel): 33554432 bytes, 0 used, 33554432 free, local mmap No devices found $ docker rm -f syncd syncd $ sudo /usr/bin/syncd.sh start Cannot get Broadcom Chip Id. Skip set SYNCD_SHM_SIZE. Creating new syncd container with HWSKU Force10-S6000 a4862129a7fea04f00ed71a88715eac65a41cdae51c3158f9cdd7de3ccc3dd31 $ docker inspect syncd \| grep -i shm "ShmSize": 67108864, "Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e", On Normal device $ docker inspect syncd \| grep -i shm "ShmSize": 268435456, "Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e" change the config syncd_shm.ini to b85=128m $ docker rm -f syncd syncd $ sudo /usr/bin/syncd.sh start Creating new syncd container with HWSKU Force10-S6000 3209ffc1e5a7224b99640eb9a286c4c7aa66a2e6a322be32fb7fe2113bb9524c $ docker inspect syncd \| grep -i shm "ShmSize": 134217728, "Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e", change the config under /usr/share/sonic/device/x86_64-dell_s6000_s1220-r0/Force10-S6000/platform_env.conf and run command $ cat /usr/share/sonic/device/x86_64-dell_s6000_s1220-r0/platform_env.conf SYNCD_SHM_SIZE=300m $ sudo /usr/bin/syncd.sh start Creating new syncd container with HWSKU Force10-S6000 897f6fcde1f669ad2caab7da4326079abd7e811bf73f018c6dacc24cf24bfda5 $ docker inspect syncd \| grep -i shm "ShmSize": 314572800, "Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e", Signed-off-by: richardyu-ms <richard.yu@microsoft.com> 2023-01-30 22:23:03 -06:00			`SYNCD_SHM_SIZE=512m`
[Arista] Add ASIC configs for blackhawktd4 (#10885) Why I did it Add ASIC configs for blackhawktd4 How to verify it Verified that 400G ports of 400GBASE-CR8 are up and traffic can pass 2022-06-17 14:50:47 -05:00			`is_ltsw_chip=1`