matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
cdcb7f02ac
sonic-buildimage/platform/mellanox/sdk.mk

159 lines
7.3 KiB
Makefile
Raw Normal View History

[mellanox] build SDK driver from open source (#3580) * build SDK driver package sx-kernel from open sourced repository Mellanox/Switch-SDK-driver * copy SDK packages and FW binaries from Mellanox/Switch-SDK-driver Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-10-08 09:57:13 -05:00
MLNX_SDK_BASE_PATH = $(PLATFORM_PATH)/sdk-src/sx-kernel/Switch-SDK-drivers/bin/
[Mellanox] Add arch folder to SDK binary location (#11278) - Why I did it This is for the eventual support of multiple architectures for the mellanox platform. - How I did it Change the location of the binaries in Switch-SDK-drivers so that the path specifies the target architecture in addition to the target distribution that the debians are built for. This is the most straightforward way to separate binaries built against different architectures and selectively target them for installation in the mellanox SONiC image. - How to verify it Build SONiC for mellanox and verify it compiles successfully.
2022-06-28 23:15:05 -05:00
MLNX_SDK_PKG_BASE_PATH = $(MLNX_SDK_BASE_PATH)/$(BLDENV)/$(CONFIGURED_ARCH)/
Update SDK/FW to version 4.5.3186/2010_3186 (#12531) - Why I did it Update SDK/FW version - 4.5.3186/2010_3186 in order to have the following changes: New functionality: 1. Added support for 6.5W (Class 8) in ports 49-50, 53-54, 57-58, and 61-62 on SN4600 system Fix the following issues: 1. On very rare occasion (~1/100K), during I2C transaction with MMS1V50-WM and MMS1V90-WR modules on SN4700 system, the module may send unexpected stop which violate the I2C specification, possibly affecting the link up flow 2. When running 1GbE speeds on SN4600 system, the port remained active while peer side was closed 3. While toggling the cable with ‘sfputil lpmode on/off’, error msg like “ERR pmon#xcvrd: Receive PMPE error event on module 1: status {X} error type {y}” could be received 4. When toggling many ports of the Spectrum devices while raising 10GbE link up and link maintenance is enabled, the switch may get stuck and may need to be rebooted 5. When trying to reconfigure the Flex Parser header and Flex transition parameters after ISSU, the switch will returned an error even if the configuration was identical to that done before performing the ISSU 6. While moving from lossless to lossy mode while shared headroom was used, reduction of the shared headroom can only be done prior to pool type change and when shared headroom is not utilized 7. SLL configuration is missing in SDK dump 8. If TTL_CMD_COPY is used in Encap direction for a packet with no TTL, then the value passed in the ttl data structure will be used if non-zero (default 255 if zero) 9. PCI calibration changes from a static to a dynamic mechanism 10. Layer 4 port information is not initialized for BFD packet event. To address the issue, remote peer UDP port information was added in BFD packet event 11. SDK returned error when FEC mode is set on twisted pair, when FEC was set to None - How I did it Update pointer for the SDK/FW - How to verify it Run regression tests Signed-off-by: dprital <drorp@nvidia.com>
2022-10-30 02:29:45 -05:00
MLNX_SDK_VERSION = 4.5.3186
[submodule] update sonic-linux-kernel (#2985) * [submodule] update sonic-linux-kernel * update linux kernel version * Fix many version strings * update mellanox components (built with new kernel) * [mlnx] add make files for SDK WJH libs * Update arista driver submodule (#8) Make the debian packaging point to a newer kernel version.
2019-06-18 12:00:16 -05:00
MLNX_SDK_ISSU_VERSION = 101
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
[platform mellanox] Substitute '-' symbol to '.' in Mellanox SDK version to prevent problems with finding deb package (#5756) In case of non-GA SDK version there is '-' symbol in Mellanox SDK version name. (For example: 4.4.1306-006) In appropriate .deb packet there is '.' instead of '-'. Because of this there was problem while building SDK Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
2020-11-10 21:27:09 -06:00
MLNX_SDK_DEB_VERSION = $(subst -,.,$(subst _,.,$(MLNX_SDK_VERSION)))
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
# Place here URL where SDK sources exist
[submodule] update sonic-linux-kernel (#2985) * [submodule] update sonic-linux-kernel * update linux kernel version * Fix many version strings * update mellanox components (built with new kernel) * [mlnx] add make files for SDK WJH libs * Update arista driver submodule (#8) Make the debian packaging point to a newer kernel version.
2019-06-18 12:00:16 -05:00
MLNX_SDK_SOURCE_BASE_URL =
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifneq ($(MLNX_SDK_SOURCE_BASE_URL), )
SDK_FROM_SRC = y
else
SDK_FROM_SRC = n
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
export MLNX_SDK_SOURCE_BASE_URL MLNX_SDK_VERSION MLNX_SDK_ISSU_VERSION MLNX_SDK_DEB_VERSION
[devices]: Added new SN3700/SN3700C Mellanox platforms (#2548) * [mlnx-msn3700]: Added MSN3700 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [mlnx-msn3700]: Upgrade FW burn: use ASIC auto detect. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [mlnx-msn3700]: Updated HW-MGMT/FW/MFT/SAI/SDK. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [mlnx-msn3700]: Added MSN3700C platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-02-14 01:08:04 -06:00
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
MLNX_SDK_RDEBS += $(APPLIBS) $(IPROUTE2_MLNX) $(SX_COMPLIB) $(SX_EXAMPLES) \
$(SX_GEN_UTILS) $(SX_SCEW) $(SXD_LIBS) $(WJH_LIBS) $(SX_ACL_HELPER)
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
MLNX_SDK_DEBS += $(APPLIBS_DEV) $(IPROUTE2_MLNX_DEV) $(SX_COMPLIB_DEV) \
$(SX_COMPLIB_DEV_STATIC) $(SX_EXAMPLES_DEV) $(SX_GEN_UTILS_DEV) \
$(SX_SCEW_DEV) $(SX_SCEW_DEV_STATIC) $(SXD_LIBS_DEV)\
$(SXD_LIBS_DEV_STATIC) $(WJH_LIBS_DEV) $(SX_ACL_HELPER_DEV)
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
MLNX_SDK_DBG_DEBS += $(APPLIBS_DBGSYM) $(IPROUTE2_MLNX_DBGSYM) $(SX_COMPLIB_DBGSYM) \
$(SX_EXAMPLES_DBGSYM) $(SX_GEN_UTILS_DBGSYM) $(SX_SCEW_DBGSYM) \
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
$(SXD_LIBS_DBGSYM) $(WJH_LIBS_DBGSYM) $(SX_ACL_HELPER_DBGSYM)
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
APPLIBS = applibs_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(APPLIBS)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/applibs
$(APPLIBS)_DEPENDS += $(SX_COMPLIB_DEV) $(SX_GEN_UTILS_DEV) $(SXD_LIBS_DEV) $(LIBNL3_DEV) $(LIBNL_GENL3_DEV)
[docker-saiserver]: build docker-saiserver (#2244) * build docker-saiserver Signed-off-by: Guohan Lu <gulv@microsoft.com> * add docker saiserver mlnx/bfn/cavm * set nephos to 1.3.5 Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-11-14 03:15:31 -06:00
$(APPLIBS)_RDEPENDS += $(SX_COMPLIB) $(SX_GEN_UTILS) $(SXD_LIBS) $(LIBNL3) $(LIBNL_GENL3)
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
APPLIBS_DEV = applibs-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(APPLIBS),$(APPLIBS_DEV)))
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
APPLIBS_DBGSYM = applibs-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(APPLIBS),$(APPLIBS_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
IPROUTE2_MLNX = iproute2_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(IPROUTE2_MLNX)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/iproute2
IPROUTE2_MLNX_DEV = iproute2-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
[vs]: add vlan configuration support in virtual switch (#1200)
2017-11-30 16:59:25 -06:00
$(eval $(call add_derived_package,$(IPROUTE2_MLNX),$(IPROUTE2_MLNX_DEV)))
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
IPROUTE2_MLNX_DBGSYM = iproute2-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(IPROUTE2_MLNX),$(IPROUTE2_MLNX_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
SX_COMPLIB = sx-complib_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(SX_COMPLIB)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-complib
SX_COMPLIB_DEV = sx-complib-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(SX_COMPLIB),$(SX_COMPLIB_DEV)))
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
SX_COMPLIB_DBGSYM = sx-complib-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_COMPLIB),$(SX_COMPLIB_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
SX_EXAMPLES = sx-examples_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(SX_EXAMPLES)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-examples
$(SX_EXAMPLES)_DEPENDS += $(APPLIBS_DEV) $(SX_SCEW_DEV) $(SXD_LIBS_DEV)
[docker-saiserver]: build docker-saiserver (#2244) * build docker-saiserver Signed-off-by: Guohan Lu <gulv@microsoft.com> * add docker saiserver mlnx/bfn/cavm * set nephos to 1.3.5 Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-11-14 03:15:31 -06:00
$(SX_EXAMPLES)_RDEPENDS += $(APPLIBS) $(SX_SCEW) $(SXD_LIBS)
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
SX_EXAMPLES_DEV = sx-examples-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(SX_EXAMPLES),$(SX_EXAMPLES_DEV)))
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
SX_EXAMPLES_DBGSYM = sx-examples-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_EXAMPLES),$(SX_EXAMPLES_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
SX_GEN_UTILS = sx-gen-utils_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(SX_GEN_UTILS)_SRC_PATH += $(PLATFORM_PATH)/sdk-src/sx-gen-utils
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
$(SX_GEN_UTILS)_DEPENDS += $(SX_COMPLIB_DEV)
[docker-saiserver]: build docker-saiserver (#2244) * build docker-saiserver Signed-off-by: Guohan Lu <gulv@microsoft.com> * add docker saiserver mlnx/bfn/cavm * set nephos to 1.3.5 Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-11-14 03:15:31 -06:00
$(SX_GEN_UTILS)_RDEPENDS += $(SX_COMPLIB)
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
SX_GEN_UTILS_DEV = sx-gen-utils-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(SX_GEN_UTILS),$(SX_GEN_UTILS_DEV)))
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
SX_GEN_UTILS_DBGSYM = sx-gen-utils-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_GEN_UTILS),$(SX_GEN_UTILS_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
SX_SCEW = sx-scew_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(SX_SCEW)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-scew
SX_SCEW_DEV = sx-scew-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(SX_SCEW),$(SX_SCEW_DEV)))
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
SX_SCEW_DBGSYM = sx-scew-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_SCEW),$(SX_SCEW_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
SXD_LIBS = sxd-libs_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(SXD_LIBS)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sxd-libs
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
$(SXD_LIBS)_DEPENDS += $(SX_COMPLIB_DEV) $(SX_GEN_UTILS_DEV)
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
SXD_LIBS_DEV = sxd-libs-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
$(eval $(call add_derived_package,$(SXD_LIBS),$(SXD_LIBS_DEV)))
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
SXD_LIBS_DBGSYM = sxd-libs-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SXD_LIBS),$(SXD_LIBS_DBGSYM)))
endif
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
Add python api to mlnx SDK (#110) * Add python api to mlnx SDK * Update sdk.mk * Add runtime dependency on python api Python SX SDK API is not required for build, however it is useful package to have in syncd docker
2016-12-08 12:31:02 -06:00
#packages that are required for runtime only
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
PYTHON_SDK_API = python-sdk-api_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(PYTHON_SDK_API)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/python-sdk-api
[mellanox]: Fixed SDK build: added missing SWIG dependency. (#2914) Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-05-17 15:45:33 -05:00
$(PYTHON_SDK_API)_DEPENDS += $(APPLIBS_DEV) $(SXD_LIBS_DEV) $(SWIG)
[docker-saiserver]: build docker-saiserver (#2244) * build docker-saiserver Signed-off-by: Guohan Lu <gulv@microsoft.com> * add docker saiserver mlnx/bfn/cavm * set nephos to 1.3.5 Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-11-14 03:15:31 -06:00
$(PYTHON_SDK_API)_RDEPENDS += $(APPLIBS) $(SXD_LIBS)
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
PYTHON_SDK_API_DBGSYM = python-sdk-api-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(PYTHON_SDK_API),$(PYTHON_SDK_API_DBGSYM)))
endif
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
SX_ACL_HELPER = sx-acl-helper_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(SX_ACL_HELPER)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-acl-helper
$(SX_ACL_HELPER)_DEPENDS += $(SX_COMPLIB_DEV) $(SXD_LIBS_DEV) $(APPLIBS_DEV)
$(SX_ACL_HELPER)_RDEPENDS += $(SX_COMPLIB) $(PYTHON_SDK_API)
SX_ACL_HELPER_DEV = sx-acl-helper-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(eval $(call add_derived_package,$(SX_ACL_HELPER),$(SX_ACL_HELPER_DEV)))
SX_ACL_HELPER_DBGSYM = sx-acl-helper-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(SX_ACL_HELPER),$(SX_ACL_HELPER_DBGSYM)))
endif
[submodule] update sonic-linux-kernel (#2985) * [submodule] update sonic-linux-kernel * update linux kernel version * Fix many version strings * update mellanox components (built with new kernel) * [mlnx] add make files for SDK WJH libs * Update arista driver submodule (#8) Make the debian packaging point to a newer kernel version.
2019-06-18 12:00:16 -05:00
WJH_LIBS = wjh-libs_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(WJH_LIBS)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/wjh-libs
[Mellanox]Upload the SDK makefile modification (#3555) Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104. This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
2019-10-07 09:13:47 -05:00
$(WJH_LIBS)_DEPENDS += $(SX_COMPLIB_DEV) $(SXD_LIBS_DEV) $(APPLIBS_DEV) $(SX_ACL_HELPER_DEV) $(SX_SCEW_DEV)
$(WJH_LIBS)_RDEPENDS += $(SX_COMPLIB) $(PYTHON_SDK_API) $(SX_ACL_HELPER)
[submodule] update sonic-linux-kernel (#2985) * [submodule] update sonic-linux-kernel * update linux kernel version * Fix many version strings * update mellanox components (built with new kernel) * [mlnx] add make files for SDK WJH libs * Update arista driver submodule (#8) Make the debian packaging point to a newer kernel version.
2019-06-18 12:00:16 -05:00
WJH_LIBS_DEV = wjh-libs-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(eval $(call add_derived_package,$(WJH_LIBS),$(WJH_LIBS_DEV)))
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
WJH_LIBS_DBGSYM = wjh-libs-dbgsym_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
ifeq ($(SDK_FROM_SRC),y)
$(eval $(call add_derived_package,$(WJH_LIBS),$(WJH_LIBS_DBGSYM)))
endif
SX_KERNEL = sx-kernel_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(SX_KERNEL)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON)
$(SX_KERNEL)_SRC_PATH = $(PLATFORM_PATH)/sdk-src/sx-kernel
SX_KERNEL_DEV = sx-kernel-dev_1.mlnx.$(MLNX_SDK_DEB_VERSION)_amd64.deb
$(eval $(call add_derived_package,$(SX_KERNEL),$(SX_KERNEL_DEV)))
[submodule] update sonic-linux-kernel (#2985) * [submodule] update sonic-linux-kernel * update linux kernel version * Fix many version strings * update mellanox components (built with new kernel) * [mlnx] add make files for SDK WJH libs * Update arista driver submodule (#8) Make the debian packaging point to a newer kernel version.
2019-06-18 12:00:16 -05:00
[mellanox] build SDK driver from open source (#3580) * build SDK driver package sx-kernel from open sourced repository Mellanox/Switch-SDK-driver * copy SDK packages and FW binaries from Mellanox/Switch-SDK-driver Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-10-08 09:57:13 -05:00
define make_path
[dockers] update mellanox syncd and pmon to buster (#4818) Upgrade to libsensors5 Updated sonic-sairedis pointer: d54bfb4 [SAI] update pointer (#636) 1885a8c [syncd] Fix notification on shutdown request (#635) 9e57ba2 Fixing hostif For Genetlink host interfaces (#633) 449a092 sonic-sairedis: Add support to sonic-sairedis for gearbox phys (#632) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2020-07-18 05:46:15 -05:00
$(1)_PATH = $(MLNX_SDK_PKG_BASE_PATH)
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
endef
[mellanox] build SDK driver from open source (#3580) * build SDK driver package sx-kernel from open sourced repository Mellanox/Switch-SDK-driver * copy SDK packages and FW binaries from Mellanox/Switch-SDK-driver Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-10-08 09:57:13 -05:00
$(eval $(foreach deb,$(MLNX_SDK_DEBS),$(call make_path,$(deb))))
$(eval $(foreach deb,$(MLNX_SDK_RDEBS),$(call make_path,$(deb))))
$(eval $(foreach deb,$(PYTHON_SDK_API) $(SX_KERNEL) $(SX_KERNEL_DEV),$(call make_path,$(deb))))
SONIC_MAKE_DEBS += $(SX_KERNEL)
Build improvements (#80) * Build improvements Fix dependencies Add configuration options Automatically build sonic-slave * Set default number of jobs to 1 * Auto generate target/debs directory Signed-off-by: marian-pritsak <marianp@mellanox.com> * Automatically remove sonic-slave container after exit * Silence clean-logs * Add SONIC_CLEAN_TARGETS to clean * Use second expansion for clean dependencies * Avoid creating empty log files Remove log file on flush instead of writing empty string * Put dpkg install inside lock Use same lock as debian install targets do to avoid race condition in dpkg installation * Remove redirect to log from docker save * Add .platform dependency to all and clean targets * Remove header and footer from clean targets * Disable messages for SONIC_CLEAN_TARGETS * Exit with error if dpkg-buildpackage fails * Set new location for debs in build_debian.sh * Add recipe for docker-database * Update redis version to 3.2.4 * Add support for p4 platform * Add recipe for snmpd * Add slave targets to phony and make all target default * Remove build.sh from thrift * Add versioning to team, nl, hiredis and initramfs * Change sonic-slave to support snmpd build from sources * Remove src/tenjin * Add recipe for lldpd * Add recipe for mpdecimal * Remove hiredis directory on rebuild * Add recipe for Mellanox hw management * Remove generic image from all targets for Mellanox * Add support for python wheels * Add lldp and snmp dockers * Sync docker-database to include libjemalloc * Fix asyncsnmp variable name * Change default build configuration Redirect output to log files by default Set number of jobs to nproc value Do not print dependencies Fix logging to print log of failed job into console * Use docker inspect to check if sonic-slave image exists * Use config in slave.mk directly * Disable color output by default * Remove sswsdk dependency from lldp and snmp dockers * Fix comment in py wheels install targets * Add dependency between two versions of sswsdk * Add containers to mellanox platform lldp, snmp and database containers * Add recipe for team docker * Add team docker to mellanox platform * Encrypt password passed to build_debian.sh * Update mellanox SAI version Make version and revision setting only in main recipe * Fix error handling in makefiles As makefiles use .ONESHELL we should add -e option to shell options in order to exit after any command fails * Add recipe for platform monitor image * Add platfotm monitor to mellanox targets * Ignore submodules when building base image
2016-12-05 13:12:19 -06:00
[platform/mellanox] install SDK/SAI dbg symbols in debug image (#3310) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-08-08 13:10:55 -05:00
ifeq ($(SDK_FROM_SRC), y)
[mellanox] build SDK driver from open source (#3580) * build SDK driver package sx-kernel from open sourced repository Mellanox/Switch-SDK-driver * copy SDK packages and FW binaries from Mellanox/Switch-SDK-driver Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-10-08 09:57:13 -05:00
SONIC_MAKE_DEBS += $(MLNX_SDK_RDEBS) $(PYTHON_SDK_API)
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
else
[mellanox] build SDK driver from open source (#3580) * build SDK driver package sx-kernel from open sourced repository Mellanox/Switch-SDK-driver * copy SDK packages and FW binaries from Mellanox/Switch-SDK-driver Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-10-08 09:57:13 -05:00
SONIC_COPY_DEBS += $(MLNX_SDK_RDEBS) $(PYTHON_SDK_API)
[mellanox] add makefiles to build Mellanox SDK from sources (#2701) * [.gitignore] add missing directories to .gitignore Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [buildsystem] add ability to override make variables from root Makefile To override any make variable during build use SONIC_OVERRIDE_BUILD_VARS, e.g: "make SONIC_OVERRIDE_BUILD_VARS="PARAM1=A PARAM2=B" all" Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] add SDK build from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] pass -j$(SONIC_CONFIG_MAKE_JOBS) when building SDK Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] Add MLNX_SAI_REPO, MLNX_FW_BASE_URL variables Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * [mellanox] if MLNX_SDK_BASE_SOURCE_URL is not empty then build SDK from sources Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
2019-03-27 20:32:25 -05:00
endif
mlnx-sdk-packages: $(addprefix $(DEBS_PATH)/, $(MLNX_SDK_RDEBS) $(PYTHON_SDK_API) $(SX_KERNEL))
SONIC_PHONY_TARGETS += mlnx-sdk-packages
Reference in New Issue Copy Permalink