matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
acd82fcdc1
sonic-buildimage/platform/broadcom/sonic-platform-modules-inventec/d6556/modules/transceiver.h

816 lines
36 KiB
C
Raw Normal View History

[device][platform] Update Inventec platform porting to support stretch (#2010) * [device][platform] d6254qs d6556 platform porting [device][platform] sensor and status led support for d7032q28b d7254q28b d7264q28b d6254qs d6556 [device][platform] qos support for d7032q28b d7254q28b [device][platform] service configuration files for d7032q28b d7254q28b d7264q28b d6254qs d6556 * remove binary files and remove non-supported attributes in config.bcm * remove gpio-ich here. file a PR in sonic-linux-kernel instead. * remove unnecessary comments * add GPL license
2018-09-14 02:54:08 -05:00
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef TRANSCEIVER_H
#define TRANSCEIVER_H
#include <linux/types.h>
/* advanced features control */
#define TRANSVR_INFO_DUMP_ENABLE (1)
#define TRANSVR_INFO_CACHE_ENABLE (1)
#define TRANSVR_UEVENT_ENABLE (1)
/* Transceiver type define */
#define TRANSVR_TYPE_UNKNOW_1 (0x00)
#define TRANSVR_TYPE_UNKNOW_2 (0xff)
#define TRANSVR_TYPE_SFP (0x03) /* Define for SFP, SFP+, SFP28 */
#define TRANSVR_TYPE_QSFP (0x0c)
#define TRANSVR_TYPE_QSFP_PLUS (0x0d)
#define TRANSVR_TYPE_QSFP_28 (0x11)
#define TRANSVR_TYPE_UNPLUGGED (0xfa) /* Define for ERROR handle */
#define TRANSVR_TYPE_FAKE (0xfc) /* Define for ERROR handle */
#define TRANSVR_TYPE_INCONSISTENT (0xfd) /* Define for ERROR handle */
#define TRANSVR_TYPE_ERROR (0xfe) /* Define for ERROR handle */
/* Transceiver class for base info */
#define TRANSVR_CLASS_UNSPECIFIED (0)
#define TRANSVR_CLASS_ERROR (-26001)
#define TRANSVR_CLASS_1G (26001)
#define TRANSVR_CLASS_10G (26011)
#define TRANSVR_CLASS_25G (26021)
#define TRANSVR_CLASS_40G (26041)
#define TRANSVR_CLASS_100G (26101)
#define TRANSVR_CLASS_NO_SPERARABLE (26901)
#define TRANSVR_CLASS_EXTEND_COMP (26902)
/* Transceiver class for Optical 1G */
#define TRANSVR_CLASS_OPTICAL (27000)
#define TRANSVR_CLASS_OPTICAL_100 (27001)
#define TRANSVR_CLASS_OPTICAL_1G (27002)
#define TRANSVR_CLASS_OPTICAL_1G_AOC (27003)
#define TRANSVR_CLASS_OPTICAL_1G_SX (27004)
#define TRANSVR_CLASS_OPTICAL_1G_LX (27005)
#define TRANSVR_CLASS_OPTICAL_1G_EX (27006)
/* Transceiver class for Optical 10G */
#define TRANSVR_CLASS_OPTICAL_10G (27010)
#define TRANSVR_CLASS_OPTICAL_10G_S_AOC (27011)
#define TRANSVR_CLASS_OPTICAL_10G_S_SR (27012)
#define TRANSVR_CLASS_OPTICAL_10G_S_LR (27013)
#define TRANSVR_CLASS_OPTICAL_10G_S_ER (27014)
#define TRANSVR_CLASS_OPTICAL_10G_Q_AOC (27015)
#define TRANSVR_CLASS_OPTICAL_10G_Q_SR (27016)
#define TRANSVR_CLASS_OPTICAL_10G_Q_LR (27017)
#define TRANSVR_CLASS_OPTICAL_10G_Q_ER (27018)
/* Transceiver class for Optical 25G */
#define TRANSVR_CLASS_OPTICAL_25G (27020)
#define TRANSVR_CLASS_OPTICAL_25G_AOC (27021)
#define TRANSVR_CLASS_OPTICAL_25G_SR (27022)
#define TRANSVR_CLASS_OPTICAL_25G_LR (27023)
#define TRANSVR_CLASS_OPTICAL_25G_ER (27024)
/* Transceiver class for Optical 40G */
#define TRANSVR_CLASS_OPTICAL_40G (27040)
#define TRANSVR_CLASS_OPTICAL_40G_AOC (27041)
#define TRANSVR_CLASS_OPTICAL_40G_SR4 (27042)
#define TRANSVR_CLASS_OPTICAL_40G_LR4 (27043)
#define TRANSVR_CLASS_OPTICAL_40G_ER4 (27044)
/* Transceiver class for Optical 100G */
#define TRANSVR_CLASS_OPTICAL_100G (27100)
#define TRANSVR_CLASS_OPTICAL_100G_AOC (27101)
#define TRANSVR_CLASS_OPTICAL_100G_SR4 (27102)
#define TRANSVR_CLASS_OPTICAL_100G_LR4 (27103)
#define TRANSVR_CLASS_OPTICAL_100G_ER4 (27104)
#define TRANSVR_CLASS_OPTICAL_100G_PSM4 (27105)
/* Transceiver class for Copper */
#define TRANSVR_CLASS_COPPER (28000)
#define TRANSVR_CLASS_COPPER_L1_1G (28001)
#define TRANSVR_CLASS_COPPER_L1_10G (28011)
#define TRANSVR_CLASS_COPPER_L4_10G (28012)
#define TRANSVR_CLASS_COPPER_L1_25G (28021)
#define TRANSVR_CLASS_COPPER_L4_40G (28041)
#define TRANSVR_CLASS_COPPER_L4_100G (28101)
/* Transceiver class for Base-T */
#define TRANSVR_CLASS_BASE_T_1000 (29001)
#define TRANSVR_CLASS_BASE_T_1000_up (29002)
/* For uevent message */
#define TRANSVR_UEVENT_KEY_IF "IF_TYPE"
#define TRANSVR_UEVENT_KEY_SP "IF_SPEED"
#define TRANSVR_UEVENT_KEY_LANE "IF_LANE"
#define TRANSVR_UEVENT_UNKNOW "UNKNOW"
#define TRANSVR_IF_KR "KR"
#define TRANSVR_IF_KR4 "KR4"
#define TRANSVR_IF_SR "SR"
#define TRANSVR_IF_SR4 "SR4"
#define TRANSVR_IF_SFI "SFI"
#define TRANSVR_IF_IF_GMII "GMII"
#define TRANSVR_IF_IF_XGMII "XGMII"
#define TRANSVR_IF_SP_100 "100"
#define TRANSVR_IF_SP_1G "1000"
#define TRANSVR_IF_SP_10G "10000"
#define TRANSVR_IF_SP_25G "25000"
#define TRANSVR_IF_SP_40G "40000"
#define TRANSVR_IF_SP_100G "100000"
/* Transceiver mode define */
#define TRANSVR_MODE_DIRECT (21000)
#define TRANSVR_MODE_POLLING (21001)
/* Transceiver state define
* [Note]
* 1. State is used to represent the state of "Transceiver" and "Object".
* 2. State for different target has different means. The description as following:
*/
#define STATE_TRANSVR_CONNECTED (0) /* [Transvr]:Be plugged in. [Obj]:Link up, and work normally. */
#define STATE_TRANSVR_NEW (-100) /* [Transvr]:(Not used) [Obj]:Create */
#define STATE_TRANSVR_INIT (-101) /* [Transvr]:Be plugged in. [Obj]:Link up, and in initial process. */
#define STATE_TRANSVR_ISOLATED (-102) /* [Transvr]:Be plugged in. [Obj]:Isolate, and not provide service. */
#define STATE_TRANSVR_SWAPPED (-200) /* [Transvr]:Be plugged in. [Obj]:(Not used) */
#define STATE_TRANSVR_DISCONNECTED (-300) /* [Transvr]:Un-plugged. [Obj]:Link down, and not provide service. */
#define STATE_TRANSVR_UNEXCEPTED (-901) /* [Transvr]:Any [Obj]:Any, and not in expect case. */
/* Task state define */
#define STATE_T_TASK_WAIT (110)
#define STATE_T_TASK_DONE (0)
#define STATE_T_TASK_INIT (-110)
#define STATE_T_TASK_FAIL (-410)
/* Event for task handling */
#define EVENT_TRANSVR_TASK_WAIT (2101)
#define EVENT_TRANSVR_TASK_DONE (0)
#define EVENT_TRANSVR_TASK_FAIL (-2101)
/* Event for initial handling */
#define EVENT_TRANSVR_INIT_UP (2201)
#define EVENT_TRANSVR_INIT_DOWN (1)
#define EVENT_TRANSVR_INIT_REINIT (-2201)
#define EVENT_TRANSVR_INIT_FAIL (-2202)
/* Event for others */
#define EVENT_TRANSVR_RELOAD_FAIL (-2301)
#define EVENT_TRANSVR_EXCEP_INIT (-2401)
#define EVENT_TRANSVR_EXCEP_UP (-2402)
#define EVENT_TRANSVR_EXCEP_DOWN (-2403)
#define EVENT_TRANSVR_EXCEP_SWAP (-2404)
#define EVENT_TRANSVR_EXCEP_EXCEP (-2405)
#define EVENT_TRANSVR_EXCEP_ISOLATED (-2406)
#define EVENT_TRANSVR_I2C_CRASH (-2501)
/* Transceiver error code define */
#define ERR_TRANSVR_UNINIT (-201)
#define ERR_TRANSVR_UNPLUGGED (-202)
#define ERR_TRANSVR_ABNORMAL (-203)
#define ERR_TRANSVR_NOSTATE (-204)
#define ERR_TRANSVR_NOTSUPPORT (-205)
#define ERR_TRANSVR_BADINPUT (-206)
#define ERR_TRANSVR_UPDATE_FAIL (-207)
#define ERR_TRANSVR_RELOAD_FAIL (-208)
#define ERR_TRANSVR_INIT_FAIL (-209)
#define ERR_TRANSVR_UNDEFINED (-210)
#define ERR_TRANSVR_TASK_FAIL (-211)
#define ERR_TRANSVR_TASK_BUSY (-212)
#define ERR_TRANSVR_UEVENT_FAIL (-213)
#define ERR_TRANSVR_FUNC_DISABLE (-214)
#define ERR_TRANSVR_I2C_CRASH (-297)
#define ERR_TRNASVR_BE_ISOLATED (-298)
#define ERR_TRANSVR_UNEXCPT (-299)
/* For debug */
#define DEBUG_TRANSVR_INT_VAL (-99)
#define DEBUG_TRANSVR_HEX_VAL (0xfe)
#define DEBUG_TRANSVR_STR_VAL "ERROR"
/* For system internal */
#define VAL_TRANSVR_COMID_ARREESS (0x50)
#define VAL_TRANSVR_COMID_OFFSET (0x00)
#define VAL_TRANSVR_EXTPHY_ADDR_56 (0x56)
#define VAL_TRANSVR_8472_READY_ADDR (0x51)
#define VAL_TRANSVR_8472_READY_PAGE (-1)
#define VAL_TRANSVR_8472_READY_OFFSET (110)
#define VAL_TRANSVR_8472_READY_BIT (0)
#define VAL_TRANSVR_8472_READY_VALUE (0)
#define VAL_TRANSVR_8472_READY_ABNORMAL (0xff)
#define VAL_TRANSVR_8436_READY_ADDR (0x50)
#define VAL_TRANSVR_8436_READY_PAGE (-1)
#define VAL_TRANSVR_8436_READY_OFFSET (2)
#define VAL_TRANSVR_8436_READY_BIT (0)
#define VAL_TRANSVR_8436_READY_VALUE (0)
#define VAL_TRANSVR_8436_READY_ABNORMAL (0xff)
#define VAL_TRANSVR_8436_PWD_ADDR (0x50)
#define VAL_TRANSVR_8436_PWD_PAGE (-1)
#define VAL_TRANSVR_8436_PWD_OFFSET (123)
#define VAL_TRANSVR_PAGE_FREE (-99)
#define VAL_TRANSVR_PAGE_SELECT_OFFSET (127)
#define VAL_TRANSVR_PAGE_SELECT_DELAY (5)
#define VAL_TRANSVR_TASK_RETRY_FOREVER (-999)
#define VAL_TRANSVR_FUNCTION_DISABLE (-1)
#define STR_TRANSVR_SFP "SFP"
#define STR_TRANSVR_QSFP "QSFP"
#define STR_TRANSVR_QSFP_PLUS "QSFP+"
#define STR_TRANSVR_QSFP28 "QSFP28"
/* For transvr buf len */
#define LEN_TRANSVR_S_STR (16)
#define LEN_TRANSVR_M_STR (32)
#define LEN_TRANSVR_L_STR (64)
/* Optical wavelength */
#define VAL_OPTICAL_WAVELENGTH_SR (850)
#define VAL_OPTICAL_WAVELENGTH_LR (1310)
#define VAL_OPTICAL_WAVELENGTH_ER (1550)
/* BCM chip type define */
#define BCM_CHIP_TYPE_TRIDENT_2 (31001) /* Magnolia, Hudson32i, Spruce */
#define BCM_CHIP_TYPE_TOMAHAWK (31002) /* Redwood, Cypress, Sequoia */
#define BCM_CHIP_TYPE_TRIDENT_3 (31003) /* Maple */
#define BF_CHIP_TYPE_TOFINO (31011) /* Lavender */
/* Info from transceiver EEPROM */
struct eeprom_map_s {
int addr_br; int page_br; int offset_br; int length_br;
int addr_cdr; int page_cdr; int offset_cdr; int length_cdr;
int addr_comp_rev; int page_comp_rev; int offset_comp_rev; int length_comp_rev;
int addr_connector; int page_connector; int offset_connector; int length_connector;
int addr_diag_type; int page_diag_type; int offset_diag_type; int length_diag_type;
int addr_extbr; int page_extbr; int offset_extbr; int length_extbr;
int addr_ext_id; int page_ext_id; int offset_ext_id; int length_ext_id;
int addr_id; int page_id; int offset_id; int length_id;
int addr_len_sm; int page_len_sm; int offset_len_sm; int length_len_sm;
int addr_len_smf; int page_len_smf; int offset_len_smf; int length_len_smf;
int addr_len_om1; int page_len_om1; int offset_len_om1; int length_len_om1;
int addr_len_om2; int page_len_om2; int offset_len_om2; int length_len_om2;
int addr_len_om3; int page_len_om3; int offset_len_om3; int length_len_om3;
int addr_len_om4; int page_len_om4; int offset_len_om4; int length_len_om4;
int addr_option; int page_option; int offset_option; int length_option;
int addr_rate_id; int page_rate_id; int offset_rate_id; int length_rate_id;
int addr_rx_am; int page_rx_am; int offset_rx_am; int length_rx_am;
int addr_rx_em; int page_rx_em; int offset_rx_em; int length_rx_em;
int addr_rx_los; int page_rx_los; int offset_rx_los; int length_rx_los;
int addr_rx_power; int page_rx_power; int offset_rx_power; int length_rx_power;
int addr_soft_rs0; int page_soft_rs0; int offset_soft_rs0; int length_soft_rs0;
int addr_soft_rs1; int page_soft_rs1; int offset_soft_rs1; int length_soft_rs1;
int addr_temp; int page_temp; int offset_temp; int length_temp;
int addr_trancomp; int page_trancomp; int offset_trancomp; int length_trancomp;
int addr_trancomp_ext; int page_trancomp_ext; int offset_trancomp_ext; int length_trancomp_ext;
int addr_tx_bias; int page_tx_bias; int offset_tx_bias; int length_tx_bias;
int addr_tx_disable; int page_tx_disable; int offset_tx_disable; int length_tx_disable;
int addr_tx_eq; int page_tx_eq; int offset_tx_eq; int length_tx_eq;
int addr_tx_fault; int page_tx_fault; int offset_tx_fault; int length_tx_fault;
int addr_tx_power; int page_tx_power; int offset_tx_power; int length_tx_power;
int addr_vendor_name; int page_vendor_name; int offset_vendor_name; int length_vendor_name;
int addr_vendor_pn; int page_vendor_pn; int offset_vendor_pn; int length_vendor_pn;
int addr_vendor_rev; int page_vendor_rev; int offset_vendor_rev; int length_vendor_rev;
int addr_vendor_sn; int page_vendor_sn; int offset_vendor_sn; int length_vendor_sn;
int addr_voltage; int page_voltage; int offset_voltage; int length_voltage;
int addr_wavelength; int page_wavelength; int offset_wavelength; int length_wavelength;
};
struct transvr_worker_s;
/* Class of transceiver object */
struct transvr_obj_s {
/* ========== Object private property ==========
* [Prop]: id
* [Desc]: Type of serial transceiver.
* [Note]: SFP:03h / QSFP:0Ch / QSPF+:0Dh /QSFP28:11h
*/
uint8_t id;
/* [Prop]: connector
* [Desc]: Connector type.
* [Note]: SFP : A0h / 2
* QSFP: 00h / 130
*/
uint8_t connector;
/* [Prop]: transvr_comp
* [Desc]: Transceiver compliance code.
* [Note]: SFP: SFF-8472
* - Normal : A0h / offset 3-10
* - Extended: A0h / offset 36
* QSFP: SFF-8436 & SFF-8636
* - Normal : 00h / offset 131-138
* - Extended: 00h / offset 192
*/
uint8_t transvr_comp[8];
uint8_t transvr_comp_ext;
/* [Prop]: vendor_name
* [Desc]: SFP vendor name (ASCII 16 byte char).
* [Note]: ex:FINISAR CORP.
*/
char *vendor_name;
/* [Prop]: vendor_pn
* [Desc]: Part number provided by SFP vendor (ASCII 16 byte char).
* [Note]:
*/
char *vendor_pn;
/* [Prop]: vendor_rev
* [Desc]: Revision level for part number provided by vendor (ASCII 4 byte char).
* [Note]:
*/
char *vendor_rev;
/* [Prop]: vendor_sn
* [Desc]: Serial number provided by vendor (ASCII 16 byte char).
* [Note]:
*/
char *vendor_sn;
/* [Prop]: Extended identifier
* [Desc]: SFP:
* => None
*
* QSFP:
* => This byte contained two information:
* (1) Power consumption class
* (2) CDR function present
* [Note]: Bit description as below:
* [SFP]
* None
*
* [QSFP]
* (1) Power consumption class:
* Class 1: 1.5W (Bit6-7 = 00:)
* Class 2: 2.0W (Bit6-7 = 01:)
* Class 3: 2.5W (Bit6-7 = 10:)
* Class 4: 3.5W (Bit6-7 = 11:)
* Class 5: 4.0W (Bit0-1 = 01:)
* Class 6: 4.5W (Bit0-1 = 10:)
* Class 7: 5.0W (Bit0-1 = 11:)
* (2) CDR function present:
* Bit2: 0 = No CDR in RX
* 1 = CDR present in RX
* Bit3: 0 = No CDR in TX
* 1 = CDR present in TX
*/
uint8_t ext_id;
/* [Prop]: br
* [Desc]: Nominal bit rate, units of 100 MBits/sec.
* [Note]: SFP:03h / QSFP:0Ch / QSPF+:0Dh
* has val: 0x67
* no val :
*/
uint8_t br;
/* [Prop]: extbr
* [Desc]: Extended br (00h/222)
* [Desc]: Nominal bit rate per channel, units of 250 Mbps.
* Complements. Byte 140. See Table 32A.
*/
uint8_t extbr;
/* [Prop]: len_sm
* [Desc]: Length (single mode)-(100's)m
* [Note]: This value specifies the link length that is supported by the transceiver
* while operating in compliance with the applicable standards using single mode
* fiber. The value is in units of 100 meters. A value of 255 means that the
* transceiver supports a link length greater than 25.4 km. A value of zero means
* that the transceiver does not support single mode fiber or that the length
* information must be determined from the transceiver technology.
*/
int len_sm;
/* [Prop]: len_smf
* [Desc]: Length (single mode)-km
* [Note]: Addition to EEPROM data from original GBIC definition. This value specifies
* the link length that is supported by the transceiver while operating in
* compliance with the applicable standards using single mode fiber. The value
* is in units of kilometers. A value of 255 means that the transceiver supports
* a link length greater than 254 km. A value of zero means that the transceiver
* does not support single mode fiber or that the length information must be
* determined from the transceiver technology.
*/
int len_smf;
/* [Prop]: len_om1
* [Desc]: Link length supported for 62.5 um OM1 fiber, units of 10 m
* [Note]: The value is in units of 10 meters. A value of 255 means that the
* transceiver supports a link length greater than 2.54 km. A value of
* zero means that the transceiver does not support 50 micron multi-mode
* fiber or that the length information must be determined from the transceiver
* technology.
*/
int len_om1;
/* [Prop]: len_om2
* [Desc]: Link length supported for 50 um OM2 fiber, units of 10 m
* [Note]: The value is in units of 10 meters. A value of 255 means that the
* transceiver supports a link length greater than 2.54 km. A value of
* zero means that the transceiver does not support 50 micron multi-mode
* fiber or that the length information must be determined from the transceiver
* technology.
*/
int len_om2;
/* [Prop]: len_om3
* [Desc]: Length (50um, OM3)
* [Note]: This value specifies link length that is supported by the transceiver while
* operating in compliance with applicable standards using 50 micron multimode
* OM3 [2000 MHz*km] fiber. The value is in units of 10 meters. A value of 255
* means that the transceiver supports a link length greater than 2.54 km. A value
* of zero means that the transceiver does not support 50 micron multimode fiber
* or that the length information must be determined from the transceiver technology.
*/
int len_om3;
/* [Prop]: len_om4
* [Desc]: Length (50um, OM4) and Length (Active Cable or Copper)
* [Note]: For optical links, this value specifies link length that is supported by the
* transceiver while operating in compliance with applicable standards using 50 micron
* multimode OM4 [4700 MHz*km] fiber. The value is in units of 10 meters. A value of
* 255 means that the transceiver supports a link length greater than 2.54 km. A value
* of zero means that the transceiver does not support 50 micron multimode fiber or that
* the length information must be determined from the transceiver codes specified in Table 5-3.
*
* For copper links, this value specifies minimum link length supported by the transceiver
* while operating in compliance with applicable standards using copper cable. For active
* cable, this value represents actual length. The value is in units of 1 meter. A value of 255
* means the transceiver supports a link length greater than 254 meters. A value of zero means
* the transceiver does not support copper or active cables or the length information must be
* determined from transceiver technology. Further information about cable design, equalization,
* and connectors is usually required to guarantee meeting a particular length requirement.
*/
int len_om4;
/* [Prop]: comp_rev
* [Desc]: SFF spec revision compliance
* [Note]: Indicates which revision of SFF SFF-8472 (SFP) / SFF-8636 (QSFP) the transceiver
* complies with. (unsigned integer)
*/
uint8_t comp_rev;
/* [Prop]: CDR
* [Desc]: For transceivers with CDR capability, setting the CDR to ON engages the internal
* retiming function. Setting the CDR to OFF enables an internal bypassing mode ,which
* directs traffic around the internal CDR. (Reference: SFF-8636)
* [Note]: value=0xff: ON.
* value=0x00: OFF.
*/
uint8_t cdr;
/* [Prop]: rate_id
* [Desc]: Soft Rate Select 0(RX).
* [Note]: 1. Addr: A0h / Offset: 13
* 2. Value description:
* 00h Unspecified
* 01h SFF-8079 (4/2/1G Rate_Select & AS0/AS1)
* 02h SFF-8431 (8/4/2G Rx Rate_Select only)
* 03h Unspecified *
* 04h SFF-8431 (8/4/2G Tx Rate_Select only)
* 05h Unspecified *
* 06h SFF-8431 (8/4/2G Independent Rx & Tx Rate_select)
* 07h Unspecified *
* 08h FC-PI-5 (16/8/4G Rx Rate_select only) High=16G only, Low=8G/4G
* 09h Unspecified *
* 0Ah FC-PI-5 (16/8/4G Independent Rx, Tx Rate_select) High=16G only,
* Low=8G/4G
* 0Bh Unspecified *
* 0Ch FC-PI-6 (32/16/8G Independent Rx, Tx Rate_Select)
* High=32G only, Low = 16G/8G
* 0Dh Unspecified *
* 0Eh 10/8G Rx and Tx Rate_Select controlling the operation or locking
* modes of the internal signal conditioner, retimer or CDR, according
* to the logic table defined in Table 10-2, High Bit Rate
* (10G) =9.95-11.3 Gb/s; Low Bit Rate (8G) = 8.5 Gb/s. In this mode,
* the default value of bit 110.3 (Soft Rate Select RS(0), Table 9-11)
* and of bit 118.3 (Soft Rate Select RS(1), Table 10-1) is 1.
* 0Fh Unspecified *
* 10h-FFh Unallocated
*/
int rate_id;
/* [Prop]: soft_rs0
* [Desc]: Soft Rate Select 0(RX).
* [Note]: 1. Writing '1' selects full bandwidth operation.
* 2. This bit is "OR'd with the hard Rate_Select, AS(0) or RS(0) pin value.
* 3. Default at power up is logic zero/low
* 4. Addr: A2h / Offset: 110 / Bit: 3
*/
uint8_t soft_rs0;
/* [Prop]: soft_rs1
* [Desc]: Soft Rate Select 1(TX).
* [Note]: 1. Writing '1' selects full bandwidth TX operation.
* 2. This bit is "OR'd with the hard Rate_Select, AS(1) or RS(1) pin value.
* 3. Default at power up is logic zero/low
* 4. Addr: A2h / Offset: 118 / Bit: 3
*/
uint8_t soft_rs1;
/* [Prop]: diag_type
* [Desc]: DIAGNOSTIC MONITORING TYPE (A0h/92)
* [Note]: Description in SFF-8472 as below:
* Bit7: Reserved for legacy diagnostic implementations. Must be '0' for compliance
* with this document.
* Bit6: Digital diagnostic monitoring implemented (described in this document).
* Must be '1' for compliance with this document.
* Bit5 Internally calibrated
* Bit4 Externally calibrated
* Bit3 Received power measurement type.0 = OMA, 1 = average power
* Bit2 Address change required see section above, "addressing modes"
* Bit1-0 Unallocated
*/
uint8_t diag_type;
/* [Prop]: curr_temp
* [Desc]: Transceiver Current Temperature (A2h/96-97)
* [Note]: 1. Dependent on diag_type.
* 2. 96: High byte
* 3. 97: Low byte
* 4. This feature only for SFP
*/
uint8_t curr_temp[2];
/* [Prop]: curr_vol
* [Desc]: Transceiver Current Voltage (SFP:A2h/108-109; QSFP:00h/22-23)
* [Note]: 1. Dependent on diag_type.
* 2. 98: High byte
* 3. 99: Low byte
* 4. This feature only for SFP
* 5. Internally measured transceiver supply voltage. Represented
* as a 16 bit unsigned integer with the voltage defined as the
* full 16 bit value (0-65535) with LSB equal to 100 uVolt,
* yielding a total range of 0 to +6.55 Volts
*/
uint8_t curr_voltage[2];
/* [Prop]: curr_tx_bias
* [Desc]: Transceiver TX Bias Current (SFP:A2h/100-101; QSFP:00h/26-27)
* [Note]: 1. Dependent on diag_type.
* 2. 100: High byte
* 3. 101: Low byte
* 4. This feature only for SFP
* 5. Measured TX bias current in uA. Represented as a 16 bit unsigned
* integer with the current defined as the full 16 bit value (0-65535)
* with LSB equal to 2 uA, yielding a total range of 0 to 131 mA.
* Accuracy is vendor specific but must be better than 10% of the
* manufacturer's nominal value over specified operating temperature
* and voltage.
*/
uint8_t curr_tx_bias[8];
/* [Prop]: curr_tx_power
* [Desc]: Transceiver TX Output Power (A2h/102-103)
* [Note]: 1. Dependent on diag_type.
* 2. 102: High byte
* 3. 103: Low byte
* 4. This feature only for SFP
* 5. Measured TX output power in mW. Represented as a 16 bit unsigned
* integer with the power defined as the full 16 bit value (0-65535)
* with LSB equal to 0.1 uW, yielding a total range of 0 to 6.5535 mW
* (~ -40 to +8.2 dBm). Data is assumed to be based on measurement of
* laser monitor photodiode current. It is factory calibrated to absolute
* units using the most representative fiber output type. Accuracy is
* vendor specific but must be better than 3dB over specified temperature
* and voltage. Data is not valid when the transmitter is disabled.
*/
uint8_t curr_tx_power[8];
/* [Prop]: curr_tx_power
* [Desc]: Transceiver TX Output Power (A2h/102-103)
* [Note]: 1. Dependent on diag_type.
* 2. 102: High byte
* 3. 103: Low byte
* 4. This feature only for SFP
* 5. Measured RX received optical power in mW. Value can represent either
* average received power or OMA depending upon how bit 3 of byte 92 (A0h)
* is set. Represented as a 16 bit unsigned integer with the power defined
* as the full 16 bit value (0-65535) with LSB equal to 0.1 uW, yielding a
* total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm). Absolute accuracy is
* dependent upon the exact optical wavelength. For the vendor specified
* wavelength, accuracy shall be better than 3dB over specified temperature
* and voltage.
*/
uint8_t curr_rx_power[8];
/* [Prop]: wavelength
* [Desc]: Wavelength or Copper Cable Attenuation
* [Note]: (Following is info from SFF-8636)
* For optical free side devices, this parameter identifies the nominal
* transmitter output wavelength at room temperature. This parameter is a
* 16-bit hex value with Byte 186 as high order byte and Byte 187 as low
* order byte. The laser wavelength is equal to the 16-bit integer value
* divided by 20 in nm (units of 0.05 nm). This resolution should be adequate
* to cover all relevant wavelengths yet provide enough resolution for all
* expected DWDM applications. For accurate representation of controlled
* wavelength applications, this value should represent the center of the
* guaranteed wavelength range. If the free side device is identified as
* copper cable these registers will be used to define the cable attenuation.
* An indication of 0 dB attenuation refers to the case where the attenuation
* is not known or is unavailable.
* Byte 186 (00-FFh) is the copper cable attenuation at 2.5 GHz in units of 1 dB.
* Byte 187 (00-FFh) is the copper cable attenuation at 5.0 GHz in units of 1 dB.
*/
uint8_t wavelength[2];
/* [Prop]: Amplitude control
* [Desc]: Amplitude control
* [Note]: QSFP28 => SFF-8636 03H Byte-238/239
*/
uint8_t rx_am[2];
/* [Prop]: Emphasis control
* [Desc]: Emphasis control
* [Note]: SFP+/28 => SFF-8472 A2H Byte-115
* QSFP28 => SFF-8636 03H Byte-236/237
*/
uint8_t rx_em[2];
/* [Prop]: Soft Rx LOS
* [Desc]: Soft Rx LOS which provide by transceiver
* [Note]: (Following is info from SFF-8636)
* Byte 3:
* - Bit 0: L-Rx1 LOS
* - Bit 1: L-Rx2 LOS
* - Bit 2: L-Rx3 LOS
* - Bit 3: L-Rx4 LOS
*/
uint8_t rx_los;
/* [Prop]: Soft Tx Disable
* [Desc]: Soft Tx Disable which provide by transceiver
* [Note]: (Following is info from SFF-8636)
* Byte 86:
* - Bit 0: Tx1 Disable
* - Bit 1: Tx2 Disable
* - Bit 2: Tx3 Disable
* - Bit 3: Tx4 Disable
*/
uint8_t tx_disable;
/* [Prop]: Soft Tx Fault
* [Desc]: Soft Tx Fault which provide by transceiver
* [Note]: (Following is info from SFF-8636)
* Byte 86:
* - Bit 0: Tx1 Fault
* - Bit 1: Tx2 Fault
* - Bit 2: Tx3 Fault
* - Bit 3: Tx4 Fault
*/
uint8_t tx_fault;
/* [Prop]: Transceiver EQUALIZATION
* [Desc]: Transceiver EQUALIZATION
* [Note]: SFP+/28 => SFF-8472 A2H Byte-114
* QSFP28 => SFF-8636 03H Byte-234/235
*/
uint8_t tx_eq[2];
/* [Prop]: OPTION VALUES
* [Desc]: The bits in the option field shall specify the options implemented in the transceiver.
* [Note]: SFP+/28 => SFF-8472 A0H Byte-64/65
* QSFP+/28 => SFF-8636 00H Byte-193/195
*/
uint8_t option[3];
/* [Prop]: External PHY offset
* [Desc]: It needs to be setup first if you want to access transceiver external phy.
* [Note]: This feature dependent on transceiver.
* Currently, only 1G-RJ45 transceiver supported it.
*/
uint8_t extphy_offset;
/* ========== Object private property ==========
*/
struct device *transvr_dev_p;
struct eeprom_map_s *eeprom_map_p;
struct i2c_client *i2c_client_p;
struct ioexp_obj_s *ioexp_obj_p;
struct transvr_worker_s *worker_p;
struct mutex lock;
char swp_name[32];
int auto_config;
int auto_tx_disable;
int chan_id;
int chipset_type;
int curr_page;
int info;
int ioexp_virt_offset;
int lane_id[8];
int layout;
int mode;
int retry;
int state;
int temp;
int type;
/* ========== Object public functions ==========
*/
int (*get_id)(struct transvr_obj_s *self);
int (*get_ext_id)(struct transvr_obj_s *self);
int (*get_connector)(struct transvr_obj_s *self);
int (*get_vendor_name)(struct transvr_obj_s *self, char *buf_p);
int (*get_vendor_pn)(struct transvr_obj_s *self, char *buf_p);
int (*get_vendor_rev)(struct transvr_obj_s *self, char *buf_p);
int (*get_vendor_sn)(struct transvr_obj_s *self, char *buf_p);
int (*get_power_cls)(struct transvr_obj_s *self);
int (*get_br)(struct transvr_obj_s *self);
int (*get_len_sm)(struct transvr_obj_s *self);
int (*get_len_smf)(struct transvr_obj_s *self);
int (*get_len_om1)(struct transvr_obj_s *self);
int (*get_len_om2)(struct transvr_obj_s *self);
int (*get_len_om3)(struct transvr_obj_s *self);
int (*get_len_om4)(struct transvr_obj_s *self);
int (*get_comp_rev)(struct transvr_obj_s *self);
int (*get_comp_eth_1)(struct transvr_obj_s *self);
int (*get_comp_eth_10)(struct transvr_obj_s *self);
int (*get_comp_eth_10_40)(struct transvr_obj_s *self);
int (*get_comp_extend)(struct transvr_obj_s *self);
int (*get_cdr)(struct transvr_obj_s *self);
int (*get_rate_id)(struct transvr_obj_s *self);
int (*get_soft_rs0)(struct transvr_obj_s *self);
int (*get_soft_rs1)(struct transvr_obj_s *self);
int (*get_info)(struct transvr_obj_s *self);
int (*get_if_type)(struct transvr_obj_s *self, char *buf_p);
int (*get_if_speed)(struct transvr_obj_s *self, char *buf_p);
int (*get_if_lane)(struct transvr_obj_s *self, char *buf_p);
int (*get_curr_temp)(struct transvr_obj_s *self, char *buf_p);
int (*get_curr_vol)(struct transvr_obj_s *self, char *buf_p);
int (*get_soft_rx_los)(struct transvr_obj_s *self, char *buf_p);
int (*get_soft_tx_disable)(struct transvr_obj_s *self, char *buf_p);
int (*get_soft_tx_fault)(struct transvr_obj_s *self, char *buf_p);
int (*get_auto_tx_disable)(struct transvr_obj_s *self, char *buf_p);
int (*get_tx_bias)(struct transvr_obj_s *self, char *buf_p);
int (*get_tx_power)(struct transvr_obj_s *self, char *buf_p);
int (*get_rx_power)(struct transvr_obj_s *self, char *buf_p);
int (*get_tx_eq)(struct transvr_obj_s *self, char *buf_p);
int (*get_rx_am)(struct transvr_obj_s *self, char *buf_p);
int (*get_rx_em)(struct transvr_obj_s *self, char *buf_p);
int (*get_wavelength)(struct transvr_obj_s *self, char *buf_p);
int (*get_extphy_offset)(struct transvr_obj_s *self, char *buf_p);
int (*get_extphy_reg)(struct transvr_obj_s *self, char *buf_p);
int (*set_cdr)(struct transvr_obj_s *self, int input_val);
int (*set_soft_rs0)(struct transvr_obj_s *self, int input_val);
int (*set_soft_rs1)(struct transvr_obj_s *self, int input_val);
int (*set_soft_tx_disable)(struct transvr_obj_s *self, int input_val);
int (*set_auto_tx_disable)(struct transvr_obj_s *self, int input_val);
int (*set_tx_eq)(struct transvr_obj_s *self, int input_val);
int (*set_rx_am)(struct transvr_obj_s *self, int input_val);
int (*set_rx_em)(struct transvr_obj_s *self, int input_val);
int (*set_extphy_offset)(struct transvr_obj_s *self, int input_val);
int (*set_extphy_reg)(struct transvr_obj_s *self, int input_val);
/* ========== Object private functions ==========
*/
int (*init)(struct transvr_obj_s *self);
int (*clean)(struct transvr_obj_s *self);
int (*check)(struct transvr_obj_s *self);
int (*update_all)(struct transvr_obj_s *self, int show_err);
int (*fsm_4_direct)(struct transvr_obj_s* self, char *caller_name);
int (*fsm_4_polling)(struct transvr_obj_s* self, char *caller_name);
int (*send_uevent)(struct transvr_obj_s* self, enum kobject_action u_action);
int (*dump_all)(struct transvr_obj_s* self);
};
/* For AVL Mapping */
struct transvr_avl_s {
char vendor_name[32];
char vendor_pn[32];
int (*init)(struct transvr_obj_s *self);
};
/* Worker for long term task of transceiver */
struct transvr_worker_s {
/* Task Parameter */
struct transvr_obj_s *transvr_p;
struct transvr_worker_s *next_p;
struct transvr_worker_s *pre_p;
unsigned long trigger_time;
char func_name[64];
int retry;
int state;
/* Task private data */
void *p_data;
/* Call back function */
int (*main_task)(struct transvr_worker_s *task);
int (*post_task)(struct transvr_worker_s *task);
};
struct transvr_obj_s *
create_transvr_obj(char *swp_name,
int chan_id,
struct ioexp_obj_s *ioexp_obj_p,
int ioexp_virt_offset,
int transvr_type,
int chipset_type,
int run_mode);
void lock_transvr_obj(struct transvr_obj_s *self);
void unlock_transvr_obj(struct transvr_obj_s *self);
int isolate_transvr_obj(struct transvr_obj_s *self);
int resync_channel_tier_2(struct transvr_obj_s *self);
void alarm_msg_2_user(struct transvr_obj_s *self, char *emsg);
#endif /* TRANSCEIVER_H */
Reference in New Issue Copy Permalink