sonic-buildimage/device/celestica/x86_64-cel_midstone-r0/plugins/sfputil.py

# sfputil.py
#
# Platform-specific SFP transceiver interface for SONiC
#

try:
    import time
    from sonic_sfp.sfputilbase import SfpUtilBase
except ImportError as e:
    raise ImportError("%s - required module not found" % str(e))


class SfpUtil(SfpUtilBase):
    """Platform-specific SfpUtil class"""

    PORT_START = 0
    PORT_END = 65
    QSFP_PORT_START = PORT_START
    QSFP_PORT_END = 63

    EEPROM_OFFSET = 1

    _port_to_eeprom_mapping = {}

    @property
    def port_start(self):
        return self.PORT_START

    @property
    def port_end(self):
        return self.PORT_END

    @property
    def qsfp_ports(self):
        return list(range(self.QSFP_PORT_START, self.QSFP_PORT_END+1))

    @property
    def port_to_eeprom_mapping(self):
        return self._port_to_eeprom_mapping

    def __init__(self):
        eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom"

        if self.port_start == 1:
            offset = self.EEPROM_OFFSET - 1
        else:
            offset = self.EEPROM_OFFSET

        for x in range(self.port_start, self.port_end + 1):
            self._port_to_eeprom_mapping[x] = eeprom_path.format(x + offset)

        SfpUtilBase.__init__(self)

    def get_presence(self, port_num):
        # Check for invalid port_num
        if port_num < self.port_start or port_num > self.port_end:
            return False

        try:
            reg_file = open("/sys/devices/platform/ms200i_cpld/qsfp_modprs")
        except IOError as e:
            print("Error: unable to open file: %s" % str(e))
            return False

        content = reg_file.readline().rstrip()

        # content is a string containing the hex representation of the register
        reg_value = int(content, 16)

        # Determind if port_num start from 1 or 0
        if self.port_start == 1:
            bit_index = port_num - 1
        else:
            bit_index = port_num

        # Mask off the bit corresponding to our port
        mask = (1 << bit_index)

        # ModPrsL is active low
        if reg_value & mask == 0:
            return True

        return False

    def get_low_power_mode(self, port_num):
        # Check for invalid port_num
        if port_num < self.port_start or port_num > self.port_end:
            return False

        try:
            reg_file = open("/sys/devices/platform/ms200i_cpld/qsfp_lpmode")
        except IOError as e:
            print("Error: unable to open file: %s" % str(e))

        content = reg_file.readline().rstrip()

        # content is a string containing the hex representation of the register
        reg_value = int(content, 16)

        # Determind if port_num start from 1 or 0
        if self.port_start == 1:
            bit_index = port_num - 1
        else:
            bit_index = port_num

        # Mask off the bit corresponding to our port
        mask = (1 << bit_index)

    # LPMode is active high
        if reg_value & mask == 0:
            return False

        return True

    def set_low_power_mode(self, port_num, lpmode):
        # Check for invalid port_num
        if port_num < self.port_start or port_num > self.port_end:
            return False

        try:
            reg_file = open("/sys/devices/platform/ms200i_cpld/qsfp_lpmode", "r+")
        except IOError as e:
            print("Error: unable to open file: %s" % str(e))
            return False

        content = reg_file.readline().rstrip()

        # content is a string containing the hex representation of the register
        reg_value = int(content, 16)

        # Determind if port_num start from 1 or 0
        if self.port_start == 1:
            bit_index = port_num - 1
        else:
            bit_index = port_num

        # Mask off the bit corresponding to our port
        mask = (1 << bit_index)

        # LPMode is active high; set or clear the bit accordingly
        if lpmode is True:
            reg_value = reg_value | mask
        else:
            reg_value = reg_value & ~mask

        # Convert our register value back to a hex string and write back
        content = hex(reg_value).strip('L')

        reg_file.seek(0)
        reg_file.write(content)
        reg_file.close()

        return True

    def reset(self, port_num):
        QSFP_RESET_REGISTER_DEVICE_FILE = "/sys/devices/platform/ms200i_cpld/qsfp_reset"

        # Check for invalid port_num
        if port_num < self.port_start or port_num > self.port_end:
            return False

        try:
            reg_file = open(QSFP_RESET_REGISTER_DEVICE_FILE, "r+")
        except IOError as e:
            print("Error: unable to open file: %s" % str(e))
            return False

        content = reg_file.readline().rstrip()

        # File content is a string containing the hex representation of the register
        reg_value = int(content, 16)

        # Determind if port_num start from 1 or 0
        if self.port_start == 1:
            bit_index = port_num - 1
        else:
            bit_index = port_num

        # Mask off the bit corresponding to our port
        mask = (1 << bit_index)

        # ResetL is active low
        reg_value = reg_value & ~mask

        # Convert our register value back to a hex string and write back
        reg_file.seek(0)
        reg_file.write(hex(reg_value).rstrip('L'))
        reg_file.close()

        # Sleep 1 second to allow it to settle
        time.sleep(1)

        # Flip the bit back high and write back to the register to take port out of reset
        try:
            reg_file = open(QSFP_RESET_REGISTER_DEVICE_FILE, "w")
        except IOError as e:
            print("Error: unable to open file: %s" % str(e))
            return False

        reg_value = reg_value | mask
        reg_file.seek(0)
        reg_file.write(hex(reg_value).rstrip('L'))
        reg_file.close()

        return True