matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
8791a32ca1
sonic-buildimage/files/image_config/constants/constants.yml

61 lines
1.6 KiB
YAML
Raw Normal View History

[TSA]: Add community to the loopback prefix, when isolated (#3708) * Rename asn/deployment_id_asn_map.yaml to constants/constants.yaml * Fix bgp templates * Add community for loopback when bgpd is isolated * Use correct community value
2019-11-06 18:07:28 -06:00
constants:
deployment_id_asn_map:
"1" : 65432
[bgpcfgd]: Split one bgp mega-template to chunks. (#4143) The one big bgp configuration template was splitted into chunks. Currently we have three types of bgp neighbor peers: general bgp peers. They are represented by CONFIG_DB::BGP_NEIGHBOR table entries dynamic bgp peers. They are represented by CONFIG_DB::BGP_PEER_RANGE table entries monitors bgp peers. They are represented by CONFIG_DB::BGP_MONITORS table entries This PR introduces three templates for each peer type: bgp policies: represent policieas that will be applied to the bgp peer-group (ip prefix-lists, route-maps, etc) bgp peer-group: represent bgp peer group which has common configuration for the bgp peer type and uses bgp routing policy from the previous item bgp peer-group instance: represent bgp configuration, which will be used to instatiate a bgp peer-group for the bgp peer-type. Usually this one is simple, consist of the referral to the bgp peer-group, bgp peer description and bgp peer ip address. This PR redefined constant.yml file. Now this file has a setting for to use or don't use bgp_neighbor metadata. This file has more parameters for now, which are not used. They will be used in the next iteration of bgpcfgd. Currently all tests have been disabled. I'm going to create next PR with the tests right after this PR is merged. I'm going to introduce better bgpcfgd in a short time. It will include support of dynamic changes for the templates. FIX:: #4231
2020-04-23 11:42:22 -05:00
"2" : 65433
bgp:
traffic_shift_community: 12345:12345
families:
- ipv4
- ipv6
use_deployment_id: false
use_neighbors_meta: false
graceful_restart:
enabled: true
restart_time: 240
multipath_relax:
enabled: true
maximum_paths:
enabled: true
ipv4: 64
ipv6: 64
[bgp] Add 'allow list' manager feature (#5513) implements a new feature: "BGP Allow list." This feature allows us to control which IP prefixes are going to be advertised via ebgp from the routes received from EBGP neighbors.
2020-10-02 12:06:04 -05:00
allow_list:
enabled: true
default_action: "permit" # or "deny"
drop_community: 5060:12345 # value of the community to identify a prefix to drop. Make sense only with allow_list_default_action equal to 'permit'
default_pl_rules:
v4:
- "deny 0.0.0.0/0 le 17"
- "permit 127.0.0.1/32"
v6:
- "deny 0::/0 le 59"
- "deny 0::/0 ge 65"
[bgpcfgd]: Dynamic BBR support (#5626) **- Why I did it** To introduce dynamic support of BBR functionality into bgpcfgd. BBR is adding `neighbor PEER_GROUP allowas-in 1' for all BGP peer-groups which points to T0 Now we can add and remove this configuration based on CONFIG_DB entry **- How I did it** I introduced a new CONFIG_DB entry: - table name: "BGP_BBR" - key value: "all". Currently only "all" is supported, which means that all peer-groups which points to T0s will be updated - data value: a dictionary: {"status": "status_value"}, where status_value could be either "enabled" or "disabled" Initially, when bgpcfgd starts, it reads initial BBR status values from the [constants.yml](https://github.com/Azure/sonic-buildimage/pull/5626/files#diff-e6f2fe13a6c276dc2f3b27a5bef79886f9c103194be4fcb28ce57375edf2c23cR34). Then you can control BBR status by changing "BGP_BBR" table in the CONFIG_DB (see examples below). bgpcfgd knows what peer-groups to change fron [constants.yml](https://github.com/Azure/sonic-buildimage/pull/5626/files#diff-e6f2fe13a6c276dc2f3b27a5bef79886f9c103194be4fcb28ce57375edf2c23cR39). The dictionary contains peer-group names as keys, and a list of address-families as values. So when bgpcfgd got a request to change the BBR state, it changes the state only for peer-groups listed in the constants.yml dictionary (and only for address families from the peer-group value). **- How to verify it** Initially, when we start SONiC FRR has BBR enabled for PEER_V4 and PEER_V6: ``` admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas' neighbor PEER_V4 allowas-in 1 neighbor PEER_V6 allowas-in 1 ``` Then we apply following configuration to the db: ``` admin@str-s6100-acs-1:~$ cat disable.json { "BGP_BBR": { "all": { "status": "disabled" } } } admin@str-s6100-acs-1:~$ sonic-cfggen -j disable.json -w ``` The log output are: ``` Oct 14 18:40:22.450322 str-s6100-acs-1 DEBUG bgp#bgpcfgd: Received message : '('all', 'SET', (('status', 'disabled'),))' Oct 14 18:40:22.450620 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-f', '/tmp/tmpmWTiuq']'. Oct 14 18:40:22.681084 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V4 soft in']'. Oct 14 18:40:22.904626 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V6 soft in']'. ``` Check FRR configuraiton and see that no allowas parameters are there: ``` admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas' admin@str-s6100-acs-1:~$ ``` Then we apply enabling configuration back: ``` admin@str-s6100-acs-1:~$ cat enable.json { "BGP_BBR": { "all": { "status": "enabled" } } } admin@str-s6100-acs-1:~$ sonic-cfggen -j enable.json -w ``` The log output: ``` Oct 14 18:40:41.074720 str-s6100-acs-1 DEBUG bgp#bgpcfgd: Received message : '('all', 'SET', (('status', 'enabled'),))' Oct 14 18:40:41.074720 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-f', '/tmp/tmpDD6SKv']'. Oct 14 18:40:41.587257 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V4 soft in']'. Oct 14 18:40:42.042967 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V6 soft in']'. ``` Check FRR configuraiton and see that the BBR configuration is back: ``` admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas' neighbor PEER_V4 allowas-in 1 neighbor PEER_V6 allowas-in 1 ``` *** The test coverage *** Below is the test coverage ``` ---------- coverage: platform linux2, python 2.7.12-final-0 ---------- Name Stmts Miss Cover ---------------------------------------------------- bgpcfgd/__init__.py 0 0 100% bgpcfgd/__main__.py 3 3 0% bgpcfgd/config.py 78 41 47% bgpcfgd/directory.py 63 34 46% bgpcfgd/log.py 15 3 80% bgpcfgd/main.py 51 51 0% bgpcfgd/manager.py 41 23 44% bgpcfgd/managers_allow_list.py 385 21 95% bgpcfgd/managers_bbr.py 76 0 100% bgpcfgd/managers_bgp.py 193 193 0% bgpcfgd/managers_db.py 9 9 0% bgpcfgd/managers_intf.py 33 33 0% bgpcfgd/managers_setsrc.py 45 45 0% bgpcfgd/runner.py 39 39 0% bgpcfgd/template.py 64 11 83% bgpcfgd/utils.py 32 24 25% bgpcfgd/vars.py 1 0 100% ---------------------------------------------------- TOTAL 1128 530 53% ``` **- Which release branch to backport (provide reason below if selected)** - [ ] 201811 - [x] 201911 - [x] 202006
2020-10-22 13:04:21 -05:00
bbr:
enabled: true
[bgpcfgd]: Fixes for BBR (#5956) * Add explicit default state into the constants.yml * Enable/disable only peer-groups, available in the config * Retrieve updates from frr before using configuration Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
2020-11-19 02:07:58 -06:00
default_state: "disabled"
[bgpcfgd]: Split one bgp mega-template to chunks. (#4143) The one big bgp configuration template was splitted into chunks. Currently we have three types of bgp neighbor peers: general bgp peers. They are represented by CONFIG_DB::BGP_NEIGHBOR table entries dynamic bgp peers. They are represented by CONFIG_DB::BGP_PEER_RANGE table entries monitors bgp peers. They are represented by CONFIG_DB::BGP_MONITORS table entries This PR introduces three templates for each peer type: bgp policies: represent policieas that will be applied to the bgp peer-group (ip prefix-lists, route-maps, etc) bgp peer-group: represent bgp peer group which has common configuration for the bgp peer type and uses bgp routing policy from the previous item bgp peer-group instance: represent bgp configuration, which will be used to instatiate a bgp peer-group for the bgp peer-type. Usually this one is simple, consist of the referral to the bgp peer-group, bgp peer description and bgp peer ip address. This PR redefined constant.yml file. Now this file has a setting for to use or don't use bgp_neighbor metadata. This file has more parameters for now, which are not used. They will be used in the next iteration of bgpcfgd. Currently all tests have been disabled. I'm going to create next PR with the tests right after this PR is merged. I'm going to introduce better bgpcfgd in a short time. It will include support of dynamic changes for the templates. FIX:: #4231
2020-04-23 11:42:22 -05:00
peers:
general: # peer_type
db_table: "BGP_NEIGHBOR"
template_dir: "general"
[bgpcfgd]: Dynamic BBR support (#5626) **- Why I did it** To introduce dynamic support of BBR functionality into bgpcfgd. BBR is adding `neighbor PEER_GROUP allowas-in 1' for all BGP peer-groups which points to T0 Now we can add and remove this configuration based on CONFIG_DB entry **- How I did it** I introduced a new CONFIG_DB entry: - table name: "BGP_BBR" - key value: "all". Currently only "all" is supported, which means that all peer-groups which points to T0s will be updated - data value: a dictionary: {"status": "status_value"}, where status_value could be either "enabled" or "disabled" Initially, when bgpcfgd starts, it reads initial BBR status values from the [constants.yml](https://github.com/Azure/sonic-buildimage/pull/5626/files#diff-e6f2fe13a6c276dc2f3b27a5bef79886f9c103194be4fcb28ce57375edf2c23cR34). Then you can control BBR status by changing "BGP_BBR" table in the CONFIG_DB (see examples below). bgpcfgd knows what peer-groups to change fron [constants.yml](https://github.com/Azure/sonic-buildimage/pull/5626/files#diff-e6f2fe13a6c276dc2f3b27a5bef79886f9c103194be4fcb28ce57375edf2c23cR39). The dictionary contains peer-group names as keys, and a list of address-families as values. So when bgpcfgd got a request to change the BBR state, it changes the state only for peer-groups listed in the constants.yml dictionary (and only for address families from the peer-group value). **- How to verify it** Initially, when we start SONiC FRR has BBR enabled for PEER_V4 and PEER_V6: ``` admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas' neighbor PEER_V4 allowas-in 1 neighbor PEER_V6 allowas-in 1 ``` Then we apply following configuration to the db: ``` admin@str-s6100-acs-1:~$ cat disable.json { "BGP_BBR": { "all": { "status": "disabled" } } } admin@str-s6100-acs-1:~$ sonic-cfggen -j disable.json -w ``` The log output are: ``` Oct 14 18:40:22.450322 str-s6100-acs-1 DEBUG bgp#bgpcfgd: Received message : '('all', 'SET', (('status', 'disabled'),))' Oct 14 18:40:22.450620 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-f', '/tmp/tmpmWTiuq']'. Oct 14 18:40:22.681084 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V4 soft in']'. Oct 14 18:40:22.904626 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V6 soft in']'. ``` Check FRR configuraiton and see that no allowas parameters are there: ``` admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas' admin@str-s6100-acs-1:~$ ``` Then we apply enabling configuration back: ``` admin@str-s6100-acs-1:~$ cat enable.json { "BGP_BBR": { "all": { "status": "enabled" } } } admin@str-s6100-acs-1:~$ sonic-cfggen -j enable.json -w ``` The log output: ``` Oct 14 18:40:41.074720 str-s6100-acs-1 DEBUG bgp#bgpcfgd: Received message : '('all', 'SET', (('status', 'enabled'),))' Oct 14 18:40:41.074720 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-f', '/tmp/tmpDD6SKv']'. Oct 14 18:40:41.587257 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V4 soft in']'. Oct 14 18:40:42.042967 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V6 soft in']'. ``` Check FRR configuraiton and see that the BBR configuration is back: ``` admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas' neighbor PEER_V4 allowas-in 1 neighbor PEER_V6 allowas-in 1 ``` *** The test coverage *** Below is the test coverage ``` ---------- coverage: platform linux2, python 2.7.12-final-0 ---------- Name Stmts Miss Cover ---------------------------------------------------- bgpcfgd/__init__.py 0 0 100% bgpcfgd/__main__.py 3 3 0% bgpcfgd/config.py 78 41 47% bgpcfgd/directory.py 63 34 46% bgpcfgd/log.py 15 3 80% bgpcfgd/main.py 51 51 0% bgpcfgd/manager.py 41 23 44% bgpcfgd/managers_allow_list.py 385 21 95% bgpcfgd/managers_bbr.py 76 0 100% bgpcfgd/managers_bgp.py 193 193 0% bgpcfgd/managers_db.py 9 9 0% bgpcfgd/managers_intf.py 33 33 0% bgpcfgd/managers_setsrc.py 45 45 0% bgpcfgd/runner.py 39 39 0% bgpcfgd/template.py 64 11 83% bgpcfgd/utils.py 32 24 25% bgpcfgd/vars.py 1 0 100% ---------------------------------------------------- TOTAL 1128 530 53% ``` **- Which release branch to backport (provide reason below if selected)** - [ ] 201811 - [x] 201911 - [x] 202006
2020-10-22 13:04:21 -05:00
bbr:
PEER_V4:
- ipv4
PEER_V6:
- ipv6
[multi-ASIC] BGP internal neighbor table support (#5520) * Initial commit for BGP internal neighbor table support. > Add new template named "internal" for the internal BGP sessions > Add a new table in database "BGP_INTERNAL_NEIGHBOR" > The internal BGP sessions will be stored in this new table "BGP_INTERNAL_NEIGHBOR" * Changes in template generation tests with the introduction of internal neighbor template files.
2020-10-28 18:41:27 -05:00
internal: # peer_type
db_table: "BGP_INTERNAL_NEIGHBOR"
template_dir: "internal"
[bgpcfgd]: Split one bgp mega-template to chunks. (#4143) The one big bgp configuration template was splitted into chunks. Currently we have three types of bgp neighbor peers: general bgp peers. They are represented by CONFIG_DB::BGP_NEIGHBOR table entries dynamic bgp peers. They are represented by CONFIG_DB::BGP_PEER_RANGE table entries monitors bgp peers. They are represented by CONFIG_DB::BGP_MONITORS table entries This PR introduces three templates for each peer type: bgp policies: represent policieas that will be applied to the bgp peer-group (ip prefix-lists, route-maps, etc) bgp peer-group: represent bgp peer group which has common configuration for the bgp peer type and uses bgp routing policy from the previous item bgp peer-group instance: represent bgp configuration, which will be used to instatiate a bgp peer-group for the bgp peer-type. Usually this one is simple, consist of the referral to the bgp peer-group, bgp peer description and bgp peer ip address. This PR redefined constant.yml file. Now this file has a setting for to use or don't use bgp_neighbor metadata. This file has more parameters for now, which are not used. They will be used in the next iteration of bgpcfgd. Currently all tests have been disabled. I'm going to create next PR with the tests right after this PR is merged. I'm going to introduce better bgpcfgd in a short time. It will include support of dynamic changes for the templates. FIX:: #4231
2020-04-23 11:42:22 -05:00
monitors: # peer_type
enabled: true
db_table: "BGP_MONITORS"
peer_group: "BGPMON"
template_dir: "monitors"
dynamic: # peer_type
enabled: true
db_table: "BGP_PEER_RANGE"
peer_group: "BGP_SPEAKER"
template_dir: "dynamic"
[chassis] Add templates and code to support VoQ chassis iBGP peers (#5622) This commit has following changes: * Add templates and code to support VoQ chassis iBGP peers * Add support to convert a new VoQChassisInternal element in the BGPSession element of the minigraph to a new BGP_VOQ_CHASSIS_NEIGHBOR table in CONFIG_DB. * Add a new set of "voq_chassis" templates to docker-fpm-frr * Add a new BGP peer manager to bgpcfgd to add neighbors from the BGP_VOQ_CHASSIS_NEIGHBOR table using the voq_chassis templates. * Add a test case for minigraph.py, making sure the VoQChassisInternal element creates a BGP_VOQ_CHASSIS_NEIGHBOR entry, but not if its value is "false". * Add a set of test cases for the new voq_chassis templates in sonic-bgpcfgd tests. Note that the templates expect the new "bgp bestpath peer-type multipath-relax" bgpd configuration to be available. Signed-off-by: Joanne Mikkelson <jmmikkel@arista.com>
2021-04-16 13:11:32 -05:00
voq_chassis: # peer_type
enabled: true
db_table: "BGP_VOQ_CHASSIS_NEIGHBOR"
template_dir: "voq_chassis"
Reference in New Issue Copy Permalink