matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
803aa389b0
sonic-buildimage/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.install

40 lines
2.3 KiB
Plaintext
Raw Normal View History

[platform]: move dell platform modules into buildimage repo Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-13 05:31:11 -05:00
s6100/scripts/iom_power_*.sh usr/local/bin
s6100/scripts/s6100_platform.sh usr/local/bin
DellEMC S6100 I2C Enumeration Segregation (#4312)
2020-03-24 15:52:30 -05:00
s6100/scripts/s6100_i2c_enumeration.sh usr/local/bin
DellEMC S6100: Add script files to executable directory (#5012)
2020-07-21 21:25:24 -05:00
s6100/scripts/s6100_bitbang_reset.sh usr/local/bin
s6100/scripts/pcisysfs.py usr/bin
[platform]: move dell platform modules into buildimage repo Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-13 05:31:11 -05:00
common/dell_i2c_utils.sh usr/local/bin
[devices]: Address Dell issue#46 : Adding MUX reset logic to fix probe failures (#2356)
2019-01-08 17:27:16 -06:00
common/io_rd_wr.py usr/local/bin
[DellEMC] S6100 Last Reboot Reason Thermal Support (#3767)
2020-02-18 02:02:33 -06:00
common/nvram_rd_wr.py usr/local/bin
[sonic-platform-modules-dell] Graceful platform reboot (#2912) The following commit addresses the graceful unmounting of file system and graceful shutdown of dockers before calling a cold reboot which will cause a power cycle of SSD. This ensures orderly shutdown and no corruption of files systems because of the power cycle to SSD. This commit will use the existing systemd-reboot service scripts and override the configuration to do cold reboot for S6100 and Z9100. Unit tested the fix and graceful shutdown of file system and dockers are done with cold reboot. Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
2019-07-23 17:26:58 -05:00
s6100/scripts/platform_reboot_override usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
[DellEMC] S6100 Last Reboot Reason Thermal Support (#3767)
2020-02-18 02:02:33 -06:00
s6100/scripts/fast-reboot_plugin usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
s6100/scripts/track_reboot_reason.sh usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
s6100/scripts/warm-reboot_plugin usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
DellEMC S6100 SSD Monitor Porting Changes in master (#7289) Why I did it To monitor the SSD health condition in DellEMC S6100 platform post upgrade. A daemon is introduced to monitor the SSD every one hour. To check for SSD status at boot time and at the time of cold-reboot. All these changes are supported only for newer SSD firmware. Porting changes from 201911 branch Added a platform_reboot_pre_check script to prevent cold-reboot based on SSD status. Depends on Azure/sonic-utilities#1556 DO NOT MERGE UNTIL ABOVE PR IS MERGED
2021-08-31 09:17:54 -05:00
s6100/scripts/soft-reboot_plugin usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
[DellEMC] S6100 Reboot cause determining CPU reset in fast-reboot (#8024) Why I did it Added a check in determining CPU reset in fast-/warm-reboot in their respective platform plugin. Introducing reboot plugin for "reboot" command to handle its own platform plugin. How I did it On branch s6100_fast_warm_check Changes to be committed: (use "git reset HEAD ..." to unstage) modified: ../../debian/platform-modules-s6100.install modified: ../scripts/fast-reboot_plugin modified: ../scripts/platform_reboot_override new file: ../scripts/reboot_plugin modified: ../scripts/track_reboot_reason.sh modified: chassis.py How to verify it Triggered cold-reset inside fast-reboot to test out the reboot-cause 2.0 API.
2021-08-04 16:35:36 -05:00
s6100/scripts/reboot_plugin usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
ssd firmware upgrade for S6100 3IE3 devices with cold-reboot/warm-reboot/fast-reboot. (#4911) * ssd_fw_upgrade * changed hdparm upgrade post filesystems unmount
2020-08-11 13:16:29 -05:00
s6100/scripts/ssd-fw-upgrade usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
[sonic-platform-modules-dell] Graceful platform reboot (#2912) The following commit addresses the graceful unmounting of file system and graceful shutdown of dockers before calling a cold reboot which will cause a power cycle of SSD. This ensures orderly shutdown and no corruption of files systems because of the power cycle to SSD. This commit will use the existing systemd-reboot service scripts and override the configuration to do cold reboot for S6100 and Z9100. Unit tested the fix and graceful shutdown of file system and dockers are done with cold reboot. Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
2019-07-23 17:26:58 -05:00
s6100/scripts/override.conf /etc/systemd/system/systemd-reboot.service.d
[devices]: Poller to detect Intel Rangely LPC failure for dell z9100/s6100 (#3065) - What I did Added Daemon to Log LPC bus degradation in Intel C2000 processor. Intel Rangeley C2000 processors with revision less than or equal to 2 have issue where LPC bus degrades over time in some processors. To identify the problem and to notify the issue, a daemon has been added which will log on encountering the issue. - How I did it Added a daemon which validates the CPLD scratch(0x102) and SMF scratch(0x202) registers by writing and reading values on regular polling intervals (300 seconds). If there is a discrepancy between read and write, a critical log will be thrown. - How to verify it The infra is verify by simulating the issue where between write and read, the value in register is modified and the log appearance is checked. - Description for the changelog Added Daemon to identify LPC bus degradation issue and notify using syslog in Dell S6100 and Z9100 platforms. This daemon will only run on processors with revision less than or equal to 2.
2019-06-24 10:13:40 -05:00
common/dell_lpc_mon.sh usr/local/bin
DellEMC S6100 SSD Monitor Porting Changes in master (#7289) Why I did it To monitor the SSD health condition in DellEMC S6100 platform post upgrade. A daemon is introduced to monitor the SSD every one hour. To check for SSD status at boot time and at the time of cold-reboot. All these changes are supported only for newer SSD firmware. Porting changes from 201911 branch Added a platform_reboot_pre_check script to prevent cold-reboot based on SSD status. Depends on Azure/sonic-utilities#1556 DO NOT MERGE UNTIL ABOVE PR IS MERGED
2021-08-31 09:17:54 -05:00
s6100/scripts/s6100_ssd_mon.sh usr/local/bin
s6100/scripts/s6100_ssd_upgrade_status.sh usr/local/bin
[Dell] S6100 S6000 - Show techsupport enhancement (#6410) - Why I did it To collect platform based logs along with "show techsupport" on S6000 and S6100 plaforms. - How I did it On branch dell_techsupport_dump Changes to be committed: (use "git reset HEAD ..." to unstage) new file: platform/broadcom/sonic-platform-modules-dell/common/actions.sh modified: platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6000.install modified: platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.install new file: platform/broadcom/sonic-platform-modules-dell/s6000/scripts/hw-management-generate-dump.sh new file: platform/broadcom/sonic-platform-modules-dell/s6100/scripts/hw-management-generate-dump.sh - How to verify it hw-mgmt-dump.tar.gz will be found in sonic_dump__< YYYYMMDD_HHMMSS>.tar.gz.
2021-03-09 17:49:24 -06:00
common/actions.sh usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
[platform]: move dell platform modules into buildimage repo Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-13 05:31:11 -05:00
s6100/scripts/platform_sensors.py usr/local/bin
DellEMC S6100 SSD Monitor Porting Changes in master (#7289) Why I did it To monitor the SSD health condition in DellEMC S6100 platform post upgrade. A daemon is introduced to monitor the SSD every one hour. To check for SSD status at boot time and at the time of cold-reboot. All these changes are supported only for newer SSD firmware. Porting changes from 201911 branch Added a platform_reboot_pre_check script to prevent cold-reboot based on SSD status. Depends on Azure/sonic-utilities#1556 DO NOT MERGE UNTIL ABOVE PR IS MERGED
2021-08-31 09:17:54 -05:00
s6100/scripts/platform_reboot_pre_check usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
[Dell] S6100 S6000 - Show techsupport enhancement (#6410) - Why I did it To collect platform based logs along with "show techsupport" on S6000 and S6100 plaforms. - How I did it On branch dell_techsupport_dump Changes to be committed: (use "git reset HEAD ..." to unstage) new file: platform/broadcom/sonic-platform-modules-dell/common/actions.sh modified: platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6000.install modified: platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.install new file: platform/broadcom/sonic-platform-modules-dell/s6000/scripts/hw-management-generate-dump.sh new file: platform/broadcom/sonic-platform-modules-dell/s6100/scripts/hw-management-generate-dump.sh - How to verify it hw-mgmt-dump.tar.gz will be found in sonic_dump__< YYYYMMDD_HHMMSS>.tar.gz.
2021-03-09 17:49:24 -06:00
s6100/scripts/hw-management-generate-dump.sh usr/bin
[devices]: DELL Platform 2.0 API Infra and Reboot Reason support in Z9100 & S6100 (#3063)
2019-07-03 08:52:35 -05:00
s6100/modules/sonic_platform-1.0-py2-none-any.whl usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
[DellEMC]: Platform modules Python3 compliance and other changes (#5609) - Make DellEMC platform modules Python3 compliant. - Change return type of PSU Platform APIs in DellEMC Z9264, S5232 and Thermal Platform APIs in S5232 to 'float'. - Remove multiple copies of pcisysfs.py. - PEP8 style changes for utility scripts. - Build and install Python3 version of sonic_platform package. - Fix minor Platform API issues.
2020-10-17 14:31:55 -05:00
s6100/modules/sonic_platform-1.0-py3-none-any.whl usr/share/sonic/device/x86_64-dell_s6100_c2538-r0
[devices]: DellEMC S6100 Watchdog support (#2835)
2019-06-29 01:47:36 -05:00
s6100/scripts/platform_watchdog_enable.sh usr/local/bin
s6100/scripts/platform_watchdog_disable.sh usr/local/bin
[platform]: move dell platform modules into buildimage repo Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-13 05:31:11 -05:00
s6100/scripts/sensors usr/bin
DellEMC S6100 SSD Monitor Porting Changes in master (#7289) Why I did it To monitor the SSD health condition in DellEMC S6100 platform post upgrade. A daemon is introduced to monitor the SSD every one hour. To check for SSD status at boot time and at the time of cold-reboot. All these changes are supported only for newer SSD firmware. Porting changes from 201911 branch Added a platform_reboot_pre_check script to prevent cold-reboot based on SSD status. Depends on Azure/sonic-utilities#1556 DO NOT MERGE UNTIL ABOVE PR IS MERGED
2021-08-31 09:17:54 -05:00
s6100/scripts/iSMART_64 usr/local/bin
[devices]: Dell-S6100/Z9100 depmod fixes (#2071)
2018-09-26 01:14:09 -05:00
s6100/systemd/platform-modules-s6100.service etc/systemd/system
[devices]: Poller to detect Intel Rangely LPC failure for dell z9100/s6100 (#3065) - What I did Added Daemon to Log LPC bus degradation in Intel C2000 processor. Intel Rangeley C2000 processors with revision less than or equal to 2 have issue where LPC bus degrades over time in some processors. To identify the problem and to notify the issue, a daemon has been added which will log on encountering the issue. - How I did it Added a daemon which validates the CPLD scratch(0x102) and SMF scratch(0x202) registers by writing and reading values on regular polling intervals (300 seconds). If there is a discrepancy between read and write, a critical log will be thrown. - How to verify it The infra is verify by simulating the issue where between write and read, the value in register is modified and the log appearance is checked. - Description for the changelog Added Daemon to identify LPC bus degradation issue and notify using syslog in Dell S6100 and Z9100 platforms. This daemon will only run on processors with revision less than or equal to 2.
2019-06-24 10:13:40 -05:00
s6100/systemd/s6100-lpc-monitor.service etc/systemd/system
DellEMC S6100 SSD Monitor Porting Changes in master (#7289) Why I did it To monitor the SSD health condition in DellEMC S6100 platform post upgrade. A daemon is introduced to monitor the SSD every one hour. To check for SSD status at boot time and at the time of cold-reboot. All these changes are supported only for newer SSD firmware. Porting changes from 201911 branch Added a platform_reboot_pre_check script to prevent cold-reboot based on SSD status. Depends on Azure/sonic-utilities#1556 DO NOT MERGE UNTIL ABOVE PR IS MERGED
2021-08-31 09:17:54 -05:00
s6100/systemd/s6100-ssd-monitor.service etc/systemd/system
s6100/systemd/s6100-ssd-monitor.timer etc/systemd/system
s6100/systemd/s6100-ssd-upgrade-status.service etc/systemd/system
[DellEMC] S6100 Last Reboot Reason Thermal Support (#3767)
2020-02-18 02:02:33 -06:00
s6100/systemd/s6100-reboot-cause.service etc/systemd/system
DellEMC S6100 I2C Enumeration Segregation (#4312)
2020-03-24 15:52:30 -05:00
s6100/systemd/s6100-i2c-enumerate.service etc/systemd/system
Dell S6100: Monitor serial-getty service (#8304) Why I did it serial-getty service exited in Dell S6100 device randomly. How I did it Added serial-getty to monit services. How to verify it Stop serial-getty in ssh session and check whether the service restarts or not.
2021-08-04 16:32:02 -05:00
s6100/scripts/s6100_serial_getty_monitor etc/monit/conf.d
[devices]: Firmware upgrade support for DellEMC platforms(s5248,s5232,z9100,s6100,z9264f) (#3743) * This method is used to update firmware components such as CPLD,FPGA,BIOS,SMF * This uses ONIE firmware upgrade design to stage firmware update from NOS. a) Copy latest firmware updater image to target running sonic. b) Run “./fw-updater -u onie-firmware-x86_64-dellemc_s5200_c3538-r0.3.40.5.1-9.bin”. c) This would automatically reboot ONIE into update mode and update firmware components to latest and reboot back to sonic without any user intervention. Signed-off-by: Srideep Devireddy <srideep_devireddy@dell.com>
2019-11-14 02:08:15 -06:00
common/fw-updater usr/local/bin
[DellEMC]: utility to set onie modes from NOS (#3860) This common utility would set next boot option as onie mode and when reboot is triggered it would reboot the box into that specific onie mode. Current support modes are rescue/install/uninstall
2019-12-10 17:13:25 -06:00
common/onie_mode_set usr/local/bin
Reference in New Issue Copy Permalink