matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
7bd0a2ad11
sonic-buildimage/device/mellanox/x86_64-mlnx_msn4800-r0/sensors.conf

225 lines
9.1 KiB
Plaintext
Raw Normal View History

[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
################################################################################
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
# Copyright (c) 2021, NVIDIA CORPORATION & AFFILIATES. All rights reserved.
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
#
# Platform specific sensors config for SN4800
################################################################################
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
# Line card power manager devices (bus is variable)
bus "i2c-59" "i2c-34-mux (chan_id 4)"
chip "mp2975-i2c-59-62"
label in1 "Linecard PMIC-1 PSU 12V Rail (in)"
label in2 "Linecard PMIC-1 AGB VCORE Rail(out1)"
label in3 "Linecard PMIC-1 AGB 1.2V Rail(out2)"
ignore in4
label temp1 "Linecard PMIC-1 AGB VCORE_1.2V Ambient Temp 1"
ignore temp2
label power1 "Linecard PMIC-1 12V AGB VCORE_1.2V Rail Pwr (in)"
label power2 "Linecard PMIC-1 AGB VCORE Rail Pwr (out)"
label power3 "Linecard PMIC-1 AGB 1.2V Rail Pwr (out)"
ignore power4
label curr1 "Linecard PMIC-1 12V AGB VCORE_1.2V Rail Curr (in)"
label curr2 "Linecard PMIC-1 AGB VCORE Rail Curr (out)"
label curr3 "Linecard PMIC-1 AGB 1.2V Rail Curr (out)"
ignore curr4
chip "mp2975-i2c-59-64"
label in1 "Linecard PMIC-2 PSU 12V Rail (in)"
label in2 "Linecard PMIC-2 PORTS 3.3V Rail(out1)"
label in3 "Linecard PMIC-2 AGB 1.8V Rail(out2)"
ignore in4
label temp1 "Linecard PMIC-2 PORTS_3.3V_AGB_1.8V Ambient Temp 1"
ignore temp2
label power1 "Linecard PMIC-2 12V PORTS_3.3V_AGB_1.8V Rail Pwr (in)"
label power2 "Linecard PMIC-2 PORTS 3.3V Rail Pwr (out)"
label power3 "Linecard PMIC-2 AGB 1.8V Rail Pwr (out)"
ignore power4
label curr1 "Linecard PMIC-2 12V PORTS_3.3V_AGB_1.8V Rail Curr (in)"
label curr2 "Linecard PMIC-2 PORTS 3.3V Rail Curr (out)"
label curr3 "Linecard PMIC-2 AGB 1.8V Rail Curr (out)"
ignore curr4
# Memory sensors
bus "i2c-0" "SMBus I801 adapter at efa0"
chip "jc42-i2c-0-1c"
label temp1 "Ambient SODIMM Temp"
chip "jc42-i2c-0-1a"
label temp1 "Ambient SODIMM Temp"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
# Temperature sensors
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
bus "i2c-3" "i2c-1-mux (chan_id 1)"
chip "mlxsw-i2c-*-37"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
label temp1 "Ambient ASIC Temp"
bus "i2c-7" "i2c-1-mux (chan_id 6)"
chip "tmp102-i2c-*-49"
label temp1 "Ambient Fan Side Temp (air intake)"
chip "tmp102-i2c-*-4a"
label temp1 "Ambient Port Side Temp (air exhaust)"
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
bus "i2c-14" "i2c-1-mux (chan_id 12)"
chip "tmp421-i2c-*-1f"
ignore temp1
label temp2 "Ambient PCIe switch Temp"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
# Power controllers
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
bus "i2c-5" "i2c-1-mux (chan_id 3)"
chip "mp2975-i2c-5-62"
label in1 "PMIC-1 PSU 12V Rail (in)"
label in2 "PMIC-1 ASIC VCORE_MAIN Rail (out)"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
ignore in3
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
ignore in4
label temp1 "PMIC-1 ASIC VCORE_MAIN Temp 1"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
ignore temp2
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
label power1 "PMIC-1 12V ASIC VCORE_MAIN Rail Pwr (in)"
label power2 "PMIC-1 ASIC VCORE_MAIN Rail Pwr (out)"
ignore power3
ignore power4
label curr1 "PMIC-1 12V ASIC VCORE_MAIN Rail Curr (in)"
label curr2 "PMIC-1 ASIC VCORE_MAIN Rail Curr (out)"
ignore curr3
ignore curr4
chip "mp2975-i2c-5-64"
label in1 "PMIC-2 PSU 12V Rail (in)"
label in2 "PMIC-2 ASIC 1.8V_MAIN Rail (out1)"
label in3 "PMIC-2 ASIC 1.2V_T0_3 Rail (out2)"
ignore in4
label temp1 "PMIC-2 ASIC 1.8V_MAIN_1.2V_T0_3 Temp 1"
ignore temp2
label power1 "PMIC-2 12V ASIC 1.8V_MAIN_1.2V_T0_3 Rail Pwr (in)"
label power2 "PMIC-2 ASIC 1.8V_MAIN Rail Pwr (out)"
label power3 "PMIC-2 ASIC 1.2V_T0_3 Rail Pwr (out)"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
ignore power4
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
label curr1 "PMIC-2 12V ASIC 1.8V_MAIN_1.2V_T0_3 Rail Curr (in)"
label curr2 "PMIC-2 ASIC 1.8V_MAIN Rail Curr (out1)"
label curr3 "PMIC-2 ASIC 1.2V_T0_3 Rail Curr (out2)"
ignore curr4
chip "mp2975-i2c-*-66"
label in1 "PMIC-3 PSU 12V Rail (in)"
label in2 "PMIC-3 ASIC VCORE_T0_3 Rail (out1)"
label in3 "PMIC-3 ASIC 1.8V_T0_3 Rail (out2)"
ignore in4
label temp1 "PMIC-3 ASIC VCORE_1.8V_T0_3 Temp 1"
ignore temp2
label power1 "PMIC-3 12V ASIC VCORE_1.8V_T0_3 Rail Pwr (in)"
label power2 "PMIC-3 ASIC VCORE_T0_3 Rail Pwr (out)"
label power3 "PMIC-3 ASIC 1.8V_T0_3 Rail Pwr (out)"
ignore power4
label curr1 "PMIC-3 12V ASIC VCORE_1.8V_T0_3 Rail Curr (in)"
label curr2 "PMIC-3 ASIC VCORE_T0_3 Rail Curr (out1)"
label curr3 "PMIC-3 ASIC 1.8V_T0_3 Rail Curr (out2)"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
ignore curr4
chip "mp2975-i2c-*-68"
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
label in1 "PMIC-4 PSU 12V Rail (in)"
label in2 "PMIC-4 ASIC VCORE_T4_7 Rail (out1)"
label in3 "PMIC-4 ASIC 1.8V_T4_7 Rail (out2)"
ignore in4
label temp1 "PMIC-4 ASIC VCORE_1.8V_T4_7 Temp 1"
ignore temp2
label power1 "PMIC-4 12V ASIC VCORE_1.8V_T4_7 Rail Pwr (in)"
label power2 "PMIC-4 ASIC VCORE_T4_7 Rail Pwr (out)"
label power3 "PMIC-3 ASIC 1.8V_T4_7 Rail Pwr (out)"
ignore power4
label curr1 "PMIC-4 12V ASIC VCORE_1.8V_T4_7 Rail Curr (in)"
label curr2 "PMIC-4 ASIC VCORE_T4_7 Rail Curr (out1)"
label curr3 "PMIC-4 ASIC 1.8V_T4_7 Rail Curr (out2)"
ignore curr4
chip "mp2975-i2c-*-6a"
label in1 "PMIC-5 PSU 12V Rail (in)"
label in2 "PMIC-5 ASIC 1.2V_MAIN Rail (out1)"
label in3 "PMIC-5 ASIC 1.2V_T4_7 Rail (out2)"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
ignore in4
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
label temp1 "PMIC-5 ASIC 1.2V_MAIN_1.2V_T4_7 Temp 1"
ignore temp2
label power1 "PMIC-5 12V ASIC 1.2V_MAIN_1.2V_T4_7 Rail Pwr (in)"
label power2 "PMIC-5 ASIC 1.2V_MAIN Rail Pwr (out)"
label power3 "PMIC-5 1.2V_T4_7 Rail Pwr (out)"
ignore power4
label curr1 "PMIC-5 12V ASIC 1.2V_MAIN_1.2V_T4_7 Rail Curr (in)"
label curr2 "PMIC-5 ASIC 1.2V_MAIN Rail Curr (out1)"
label curr3 "PMIC-5 ASIC 1.2V_T4_7 Rail Curr (out2)"
ignore curr4
ignore curr4
bus "i2c-56" "i2c-1-mux (chan_id 6)"
chip "mp2975-i2c-*-6b"
label in1 "PMIC-6 PSU 12V Rail (in1)"
label in2 "PMIC-6 PSU 12V Rail (in2)"
label in3 "PMIC-6 COMEX 1.8V Rail (out1)"
label in4 "PMIC-6 COMEX 1.05V Rail (out2)"
label temp1 "PMIC-6 Temp 1"
label temp2 "PMIC-6 Temp 2"
label power1 "PMIC-6 COMEX 1.8V Rail Pwr (out1)"
label power2 "PMIC-6 COMEX 1.05V Rail Pwr (out2)"
label curr1 "PMIC-6 COMEX 1.8V Rail Curr (out1)"
label curr2 "PMIC-6 COMEX 1.05V Rail Curr (out2)"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
# Power supplies
bus "i2c-4" "i2c-1-mux (chan_id 3)"
chip "dps460-i2c-*-59"
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
label in1 "PSU-1(R) 220V Rail (in)"
ignore in2
label in3 "PSU-1(R) 12V Rail (out)"
label fan1 "PSU-1(R) Fan 1"
label temp1 "PSU-1(R) Temp 1"
label temp2 "PSU-1(R) Temp 2"
label temp3 "PSU-1(R) Temp 3"
label power1 "PSU-1(R) 220V Rail Pwr (in)"
label power2 "PSU-1(R) 12V Rail Pwr (out)"
label curr1 "PSU-1(R) 220V Rail Curr (in)"
label curr2 "PSU-1(R) 12V Rail Curr (out)"
chip "dps460-i2c-*-58"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
label in1 "PSU-2(R) 220V Rail (in)"
ignore in2
label in3 "PSU-2(R) 12V Rail (out)"
label fan1 "PSU-2(R) Fan 1"
label temp1 "PSU-2(R) Temp 1"
label temp2 "PSU-2(R) Temp 2"
label temp3 "PSU-2(R) Temp 3"
label power1 "PSU-2(R) 220V Rail Pwr (in)"
label power2 "PSU-2(R) 12V Rail Pwr (out)"
label curr1 "PSU-2(R) 220V Rail Curr (in)"
label curr2 "PSU-2(R) 12V Rail Curr (out)"
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
chip "dps460-i2c-*-5b"
label in1 "PSU-3(L) 220V Rail (in)"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
ignore in2
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
label in3 "PSU-3(L) 12V Rail (out)"
label fan1 "PSU-3(L) Fan 1"
label temp1 "PSU-3(L) Temp 1"
label temp2 "PSU-3(L) Temp 2"
label temp3 "PSU-3(L) Temp 3"
label power1 "PSU-3(L) 220V Rail Pwr (in)"
label power2 "PSU-3(L) 12V Rail Pwr (out)"
label curr1 "PSU-3(L) 220V Rail Curr (in)"
label curr2 "PSU-3(L) 12V Rail Curr (out)"
chip "dps460-i2c-*-5a"
label in1 "PSU-4(L) 220V Rail (in)"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
ignore in2
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
label in3 "PSU-4(L) 12V Rail (out)"
label fan1 "PSU-4(L) Fan 1"
label temp1 "PSU-4(L) Temp 1"
label temp2 "PSU-4(L) Temp 2"
label temp3 "PSU-4(L) Temp 3"
label power1 "PSU-4(L) 220V Rail Pwr (in)"
label power2 "PSU-4(L) 12V Rail Pwr (out)"
label curr1 "PSU-4(L) 220V Rail Curr (in)"
label curr2 "PSU-4(L) 12V Rail Curr (out)"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
# Chassis fans
chip "mlxreg_fan-isa-*"
label fan1 "Chassis Fan Drawer-1 Tach 1"
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
label fan2 "Chassis Fan Drawer-2 Tach 1"
label fan3 "Chassis Fan Drawer-3 Tach 1"
label fan4 "Chassis Fan Drawer-4 Tach 1"
label fan5 "Chassis Fan Drawer-5 Tach 1"
label fan6 "Chassis Fan Drawer-6 Tach 1"
[Mellanox] Add initial support for SN4800 platform (#7447) - Why I did it Add initial support of SN4800 platform . NOTE: This is work in progress and not full support of the platform. - How I did it Add new folders for SN4800 with zero ports based on SN4700 Spectrum-3 switch. - How to verify it Simulator device was tested. See #7448
2021-05-12 14:21:04 -05:00
[Mellanox] Update platform files for SN4800 (#8540) - Why I did it Update platform data files for SN4800 to support chassis management - How I did it Update pcie.yml Update sensors.conf Update platform.json - How to verify it Run platform test suite in sonic-mgmt
2021-08-25 13:13:07 -05:00
# Line card hotswap device (bus is variable, any above 63)
chip "lm25066-i2c-*-15"
label in1 "Linecard Hotswap 12V_IN Rail(vin)"
ignore in2
label in3 "Linecard Hotswap 12V Rail(vout)"
label power1 "Linecard Hotswap 12V_IN (pin)"
label power2 "Linecard Hotswap 12V (pout)"
label curr1 "Linecard Hotswap 12V_IN (iin)"
label curr2 "Linecard Hotswap 12V (iout)"
ignore temp1
Reference in New Issue Copy Permalink