matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
4e87caf6bb
sonic-buildimage/platform/components/docker-gbsyncd-broncos/Dockerfile.j2

43 lines
1.2 KiB
Docker
Raw Normal View History

[202205] Remove apt package lists and make macro to clean up apt and python cache (#14377) * Remove apt package lists and make macro to clean up apt and python cache Remove the apt package lists (`/var/lib/apt/lists`) from the docker containers. This saves about 100MB. Also, make a macro to clean up the apt and python cache that can then be used in all of the containers. This helps make the cleanup be consistent across all containers. Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
2023-03-22 16:51:25 -05:00
{% from "dockers/dockerfile-macros.j2" import install_debian_packages, install_python_wheels, copy_files, cleanup_apt_and_python_cache %}
[gbsyncd] Build docker-gbsyncd-broncos image (#11748) The libsaibroncos debian package is published at $(LIBSAI_BRONCOS)_URL. Enable building docker-gbsyncd-broncos image on PLATFORM broadcom.
2022-08-22 23:38:08 -05:00
FROM docker-config-engine-bullseye-{{DOCKER_USERNAME}}:{{DOCKER_USERTAG}}
Add gbsyncd container for broncos (#11154) * Add docker-gbsyncd-broncos support * Address review comments * Add socket to gbsyncd * Upgrade gbsyncd-broncos to bullseye
2022-07-17 21:57:27 -05:00
ARG docker_container_name
RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf
## Make apt-get non-interactive
ENV DEBIAN_FRONTEND=noninteractive
RUN apt-get update
RUN apt-get install -f -y iproute2 libcap2-bin libprotobuf-dev
COPY \
{% for deb in docker_gbsyncd_broncos_debs.split(' ') -%}
{% if 'libsaibcm' not in deb -%}
debs/{{ deb }}{{' '}}
{%- endif %}
{%- endfor -%}
debs/
RUN dpkg -i \
{% for deb in docker_gbsyncd_broncos_debs.split(' ') -%}
{% if 'libsaibcm' not in deb -%}
debs/{{ deb }}{{' '}}
{%- endif %}
{%- endfor %}
COPY ["docker-init.sh", "/usr/bin/"]
COPY ["start.sh", "/usr/bin/"]
[gbsyncd] Enable debug shell for BRCM broncos PHY (#12622) * Build docker-gbsyncd-broncos image * Correct typo in LIBSAI_BRONCOS_URL_PREFIX * Update docker-gbsyncd-broncos/Dockerfile.j2 * Enable debug shell support on docker-gbsyncd-broncos * Include bcmsh in docker-gbsyncd-broncos Why I did it In docker-gbsyncd-broncos image, enable debug shell support for BRCM broncos PHY. How I did it How to verify it Note: need enable attr SAI_SWITCH_ATTR_SWITCH_SHELL_ENABLE support in BCM PAI library # bcmsh Press Enter to show prompt. Press Ctrl+C to exit. NOTICE: Only one bcmsh or bcmcmd can connect to the shell at same time. BRCM:> help help List of available commands - h or help => Print command menu - l => Print list of active ports on the PHY - ps <port_id> <options> => Print port status <options> => 1 -> Link status => 2 -> Link training failure status => 3 -> Link training RX status => 4 -> PRBS lock status => 5 -> PRBS lock loss status - rd <port_id> <addr> <no of registers to read> => Read register contents - wr <port_id> <addr> <data> => Write register data - rrd <lanemap> <if_side> <addr> <no of registers to read> => Raw read register contents using lanemap and if_side (line = 0, system = 1) - rwr <lanemap> <if_side> <addr> <data> => Raw write register data using lanemap and if_side (line = 0, system = 1) - fw or firmware => Print firmware version of the PHY - pd or port_dump <port_id> <flags> => Dump port status - eyescan <port_id> => Display eye scan - fec_status <port_id> => Get fec status of the port - polarity <lanemap> <if_side> <TX polarity> <RX Polarity> => Set TX and RX polarity <lanemap> => 0xF, 0xFF, or 0xFFFF based on number of lanes <if_side > => Line = 0, System = 1 <TX/RX Polarity> =>_TX/RX Polarity bitmap of all lanes Each bit represents a lane number. E.g. Lane 0's polarity value (0 or 1) is populated in Bit 0. - polarity <lanemap> <if_side> => Print TX and RX polarity - lb <port_id> <lb_value> => Enable loopback on the port lb_value = 0 -> Disable, 1 -> PHY, 2 -> MAC - lb <port_id> => Print loopback configuration of the port - prbs <port_id> <options> <val> => Set/Get PRBS configuration <options> => 1 -> Get PRBS state and polynomial 2 -> Set PRBS Polynomial, <val> - PRBS Polynomial Please refer to phy/chip documentation for valid values 3 -> Enable PRBS <val> => 0 Disable PRBS 1 Enable both PRBS Transmitter and Receiver 2 Enable PRBS Receiver 3 Enable PRBS Transmitter exit or q => Exit the diagnostic shell
2022-11-08 19:58:25 -06:00
COPY ["bcmsh", "/usr/bin/"]
Add gbsyncd container for broncos (#11154) * Add docker-gbsyncd-broncos support * Address review comments * Add socket to gbsyncd * Upgrade gbsyncd-broncos to bullseye
2022-07-17 21:57:27 -05:00
COPY ["critical_processes.j2", "/usr/share/sonic/templates"]
COPY ["supervisord.conf.j2", "/usr/share/sonic/templates"]
COPY ["files/supervisor-proc-exit-listener", "/usr/bin"]
[gbsyncd] Enable debug shell for BRCM broncos PHY (#12622) * Build docker-gbsyncd-broncos image * Correct typo in LIBSAI_BRONCOS_URL_PREFIX * Update docker-gbsyncd-broncos/Dockerfile.j2 * Enable debug shell support on docker-gbsyncd-broncos * Include bcmsh in docker-gbsyncd-broncos Why I did it In docker-gbsyncd-broncos image, enable debug shell support for BRCM broncos PHY. How I did it How to verify it Note: need enable attr SAI_SWITCH_ATTR_SWITCH_SHELL_ENABLE support in BCM PAI library # bcmsh Press Enter to show prompt. Press Ctrl+C to exit. NOTICE: Only one bcmsh or bcmcmd can connect to the shell at same time. BRCM:> help help List of available commands - h or help => Print command menu - l => Print list of active ports on the PHY - ps <port_id> <options> => Print port status <options> => 1 -> Link status => 2 -> Link training failure status => 3 -> Link training RX status => 4 -> PRBS lock status => 5 -> PRBS lock loss status - rd <port_id> <addr> <no of registers to read> => Read register contents - wr <port_id> <addr> <data> => Write register data - rrd <lanemap> <if_side> <addr> <no of registers to read> => Raw read register contents using lanemap and if_side (line = 0, system = 1) - rwr <lanemap> <if_side> <addr> <data> => Raw write register data using lanemap and if_side (line = 0, system = 1) - fw or firmware => Print firmware version of the PHY - pd or port_dump <port_id> <flags> => Dump port status - eyescan <port_id> => Display eye scan - fec_status <port_id> => Get fec status of the port - polarity <lanemap> <if_side> <TX polarity> <RX Polarity> => Set TX and RX polarity <lanemap> => 0xF, 0xFF, or 0xFFFF based on number of lanes <if_side > => Line = 0, System = 1 <TX/RX Polarity> =>_TX/RX Polarity bitmap of all lanes Each bit represents a lane number. E.g. Lane 0's polarity value (0 or 1) is populated in Bit 0. - polarity <lanemap> <if_side> => Print TX and RX polarity - lb <port_id> <lb_value> => Enable loopback on the port lb_value = 0 -> Disable, 1 -> PHY, 2 -> MAC - lb <port_id> => Print loopback configuration of the port - prbs <port_id> <options> <val> => Set/Get PRBS configuration <options> => 1 -> Get PRBS state and polynomial 2 -> Set PRBS Polynomial, <val> - PRBS Polynomial Please refer to phy/chip documentation for valid values 3 -> Enable PRBS <val> => 0 Disable PRBS 1 Enable both PRBS Transmitter and Receiver 2 Enable PRBS Receiver 3 Enable PRBS Transmitter exit or q => Exit the diagnostic shell
2022-11-08 19:58:25 -06:00
COPY ["files/dsserve", "/usr/bin/"]
RUN chmod +x /usr/bin/dsserve
Add gbsyncd container for broncos (#11154) * Add docker-gbsyncd-broncos support * Address review comments * Add socket to gbsyncd * Upgrade gbsyncd-broncos to bullseye
2022-07-17 21:57:27 -05:00
[202205] Remove apt package lists and make macro to clean up apt and python cache (#14377) * Remove apt package lists and make macro to clean up apt and python cache Remove the apt package lists (`/var/lib/apt/lists`) from the docker containers. This saves about 100MB. Also, make a macro to clean up the apt and python cache that can then be used in all of the containers. This helps make the cleanup be consistent across all containers. Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
2023-03-22 16:51:25 -05:00
{{ cleanup_apt_and_python_cache() }}
Add gbsyncd container for broncos (#11154) * Add docker-gbsyncd-broncos support * Address review comments * Add socket to gbsyncd * Upgrade gbsyncd-broncos to bullseye
2022-07-17 21:57:27 -05:00
ENTRYPOINT ["/usr/bin/docker-init.sh"]
Reference in New Issue Copy Permalink