matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
31811db9ae
sonic-buildimage/device/mellanox/x86_64-mlnx_msn4600c-r0/sensors.conf.a1

153 lines
6.0 KiB
Plaintext
Raw Normal View History

[Mellanox] Add sensors conf for MSN4600C A1 platform (#9706) - Why I did it Add sensor conf for MSN4600C A1 platform - How I did it Add a new sensor conf file and relevant scripts to support two different versions of the platform - How to verify it Run "sensors" cmd to check the output on the A1 platform to see whether it's as expected. Signed-off-by: Kebo Liu <kebol@nvidia.com>
2022-01-12 23:59:35 -06:00
##
## Copyright (c) 2022 NVIDIA CORPORATION & AFFILIATES.
## Apache-2.0
##
## Licensed under the Apache License, Version 2.0 (the "License");
## you may not use this file except in compliance with the License.
## You may obtain a copy of the License at
##
## http://www.apache.org/licenses/LICENSE-2.0
##
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
## See the License for the specific language governing permissions and
## limitations under the License.
##
# Temperature sensors
bus "i2c-2" "i2c-1-mux (chan_id 1)"
chip "mlxsw-i2c-*-48"
label temp1 "Ambient ASIC Temp"
bus "i2c-7" "i2c-1-mux (chan_id 6)"
chip "tmp102-i2c-*-49"
label temp1 "Ambient Fan Side Temp (air intake)"
chip "tmp102-i2c-*-4a"
label temp1 "Ambient Port Side Temp (air exhaust)"
bus "i2c-15" "i2c-1-mux (chan_id 6)"
chip "tmp102-i2c-15-49"
label temp1 "Ambient COMEX Temp"
# Power controllers
bus "i2c-5" "i2c-1-mux (chan_id 4)"
chip "mp2975-i2c-*-62"
label in1 "PMIC-1 PSU 12V Rail (in1)"
label in2 "PMIC-1 ASIC 0.8V VCORE MAIN Rail (out)"
label temp1 "PMIC-1 Temp 1"
label power1 "PMIC-1 PSU 12V Rail Pwr (in1)"
label power2 "PMIC-1 ASIC 0.8V VCORE MAIN Rail Pwr (out)"
label curr1 "PMIC-1 PSU 12V Rail Curr (in1)"
label curr2 "PMIC-1 ASIC 0.8V VCORE MAIN Rail Curr (out)"
chip "mp2975-i2c-*-64"
label in1 "PMIC-2 PSU 12V Rail (in1)"
label in2 "PMIC-2 ASIC 1.8V VCORE MAIN Rail (out)"
label in3 "PMIC-2 ASIC 1.2V VCORE MAIN Rail (out)"
label temp1 "PMIC-2 Temp 1"
label power1 "PMIC-2 PSU 12V Rail Pwr (in1)"
label power2 "PMIC-2 ASIC 1.8V VCORE MAIN Rail Pwr (out)"
label curr1 "PMIC-2 PSU 12V Rail Curr (in1)"
label curr2 "PMIC-2 ASIC 1.8V VCORE MAIN Rail Curr (out)"
label curr3 "PMIC-2 ASIC 1.2V VCORE MAIN Rail Curr (out)"
chip "mp2975-i2c-*-66"
label in1 "PMIC-3 PSU 12V Rail (in1)"
label in2 "PMIC-3 ASIC 0.85V T0_1 Rail (out)"
label in3 "PMIC-3 ASIC 1.8V T0_1 Rail (out)"
label temp1 "PMIC-3 Temp 1"
label power1 "PMIC-3 PSU 12V Rail Pwr (in1)"
label power2 "PMIC-3 ASIC 0.85V T0_1 Rail Pwr (out)"
label curr1 "PMIC-3 PSU 12V Rail Curr (in1)"
label curr2 "PMIC-3 ASIC 0.85V T0_1 Rail Curr (out)"
label curr3 "PMIC-3 ASIC 1.8V T0_1 Rail Curr (out)"
chip "mp2975-i2c-*-6a"
label in1 "PMIC-4 PSU 12V Rail (in1)"
label in2 "PMIC-4 ASIC 0.85V T2_3 Rail (out)"
label in3 "PMIC-4 ASIC 1.8V T2_3 Rail (out)"
label temp1 "PMIC-4 Temp 1"
label power1 "PMIC-4 PSU 12V Rail Pwr (in1)"
label power2 "PMIC-4 ASIC 0.85V T2_3 Rail Pwr (out)"
label curr1 "PMIC-4 PSU 12V Rail Curr (in1)"
label curr2 "PMIC-4 ASIC 0.85V T2_3 Rail Curr (out)"
label curr3 "PMIC-4 ASIC 1.8V T2_3 Rail Curr (out)"
chip "mp2975-i2c-*-6e"
label in1 "PMIC-5 PSU 12V Rail (in1)"
label in2 "PMIC-5 ASIC 1.2V T0_3 Rail_1 (out)"
label in3 "PMIC-5 ASIC 1.2V T4_7 Rail_2 (out)"
label temp1 "PMIC-5 Temp 1"
label power1 "PMIC-5 PSU 12V Rail Pwr (in1)"
label power2 "PMIC-5 ASIC 1.2V T0_3 Rail_1 Pwr (out)"
label power3 "PMIC-5 ASIC 1.2V T4_7 Rail_2 Pwr (out)"
label curr1 "PMIC-5 PSU 12V Rail Curr (in1)"
label curr2 "PMIC-5 ASIC 1.2V T0_3 Rail_1 Curr (out)"
label curr3 "PMIC-5 ASIC 1.2V T4_7 Rail_2 Curr (out)"
bus "i2c-15" "i2c-1-mux (chan_id 6)"
chip "tps53679-i2c-*-58"
label in1 "PMIC-6 PSU 12V Rail (in1)"
label in2 "PMIC-6 PSU 12V Rail (in2)"
label in3 "PMIC-6 COMEX 1.8V Rail (out)"
label in4 "PMIC-6 COMEX 1.05V Rail (out)"
label temp1 "PMIC-6 Temp 1"
label temp2 "PMIC-6 Temp 2"
label power1 "PMIC-6 COMEX 1.8V Rail Pwr (out)"
label power2 "PMIC-6 COMEX 1.05V Rail Pwr (out)"
label curr1 "PMIC-6 COMEX 1.8V Rail Curr (out)"
label curr2 "PMIC-6 COMEX 1.05V Rail Curr (out)"
chip "tps53679-i2c-*-61"
label in1 "PMIC-7 PSU 12V Rail (in1)"
label in2 "PMIC-7 PSU 12V Rail (in2)"
label in3 "PMIC-7 COMEX 1.2V Rail (out)"
ignore in4
label temp1 "PMIC-7 Temp 1"
label temp2 "PMIC-7 Temp 2"
label power1 "PMIC-7 COMEX 1.2V Rail Pwr (out)"
ignore power2
label curr1 "PMIC-7 COMEX 1.2V Rail Curr (out)"
ignore curr2
# Power supplies
bus "i2c-4" "i2c-1-mux (chan_id 3)"
chip "dps460-i2c-*-58"
label in1 "PSU-1(L) 220V Rail (in)"
ignore in2
label in3 "PSU-1(L) 12V Rail (out)"
label fan1 "PSU-1(L) Fan 1"
ignore fan2
ignore fan3
label temp1 "PSU-1(L) Temp 1"
label temp2 "PSU-1(L) Temp 2"
label temp3 "PSU-1(L) Temp 3"
label power1 "PSU-1(L) 220V Rail Pwr (in)"
label power2 "PSU-1(L) 12V Rail Pwr (out)"
label curr1 "PSU-1(L) 220V Rail Curr (in)"
label curr2 "PSU-1(L) 12V Rail Curr (out)"
[Mellanox] Auto correct PSU voltage threshold (WA) (#10394) - Why I did it There is a hardware bug that PSU voltage threshold sysfs returns incorrect value. The workaround is to call "sensor -s" to refresh it. - How I did it Call "sensor -s" when the threshold value is not incorrect and PSU is "DELTA 1100" - How to verify it Unit test and Manual test
2022-04-14 00:14:40 -05:00
set in3_lcrit in3_crit * 0.662
set in3_min in3_crit * 0.745
set in3_max in3_crit * 0.952
[Mellanox] Add sensors conf for MSN4600C A1 platform (#9706) - Why I did it Add sensor conf for MSN4600C A1 platform - How I did it Add a new sensor conf file and relevant scripts to support two different versions of the platform - How to verify it Run "sensors" cmd to check the output on the A1 platform to see whether it's as expected. Signed-off-by: Kebo Liu <kebol@nvidia.com>
2022-01-12 23:59:35 -06:00
chip "dps460-i2c-*-59"
label in1 "PSU-2(R) 220V Rail (in)"
ignore in2
label in3 "PSU-2(R) 12V Rail (out)"
label fan1 "PSU-2(R) Fan 1"
ignore fan2
ignore fan3
label temp1 "PSU-2(R) Temp 1"
label temp2 "PSU-2(R) Temp 2"
label temp3 "PSU-2(R) Temp 3"
label power1 "PSU-2(R) 220V Rail Pwr (in)"
label power2 "PSU-2(R) 12V Rail Pwr (out)"
label curr1 "PSU-2(R) 220V Rail Curr (in)"
label curr2 "PSU-2(R) 12V Rail Curr (out)"
[Mellanox] Auto correct PSU voltage threshold (WA) (#10394) - Why I did it There is a hardware bug that PSU voltage threshold sysfs returns incorrect value. The workaround is to call "sensor -s" to refresh it. - How I did it Call "sensor -s" when the threshold value is not incorrect and PSU is "DELTA 1100" - How to verify it Unit test and Manual test
2022-04-14 00:14:40 -05:00
set in3_lcrit in3_crit * 0.662
set in3_min in3_crit * 0.745
set in3_max in3_crit * 0.952
[Mellanox] Add sensors conf for MSN4600C A1 platform (#9706) - Why I did it Add sensor conf for MSN4600C A1 platform - How I did it Add a new sensor conf file and relevant scripts to support two different versions of the platform - How to verify it Run "sensors" cmd to check the output on the A1 platform to see whether it's as expected. Signed-off-by: Kebo Liu <kebol@nvidia.com>
2022-01-12 23:59:35 -06:00
# Chassis fans
chip "mlxreg_fan-isa-*"
label fan1 "Chassis Fan Drawer-1"
label fan2 "Chassis Fan Drawer-2"
label fan3 "Chassis Fan Drawer-3"
Reference in New Issue Copy Permalink