matthew/sonic-buildimage
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
20ba1e2406
sonic-buildimage/device/mellanox/x86_64-mlnx_msn3800-r0/sensors.conf

204 lines
6.4 KiB
Plaintext
Raw Normal View History

[mellanox]: Added SN3800 platform (#3262) * [mellanox]: Added SN3800 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-08-01 18:25:44 -05:00
################################################################################
# Copyright (c) 2019 Mellanox Technologies
#
# Platform specific sensors config for SN3800
################################################################################
# Temperature sensors
bus "i2c-2" "i2c-1-mux (chan_id 1)"
chip "mlxsw-i2c-*-48"
label temp1 "Ambient ASIC Temp"
[Mellanox] Remove SFP sensors from sensors.conf (#17631) - Why I did it The cable thermal sensors will be deprecated from the kernel driver. When cable host management is enabled, NOS will fetch the cable temperature from cable EEPROM, kernel driver will not provide the sysfs anymore. - How I did it Remove the relevant sensor form the conf files - How to verify it Run sonic mgmt sensor test Signed-off-by: Kebo Liu <kebol@nvidia.com>
2024-02-12 08:12:57 -06:00
ignore temp2
ignore temp3
ignore temp4
ignore temp5
ignore temp6
ignore temp7
ignore temp8
ignore temp9
ignore temp10
ignore temp11
ignore temp12
ignore temp13
ignore temp14
ignore temp15
ignore temp16
ignore temp17
ignore temp18
ignore temp19
ignore temp20
ignore temp21
ignore temp22
ignore temp23
ignore temp24
ignore temp25
ignore temp26
ignore temp27
ignore temp28
ignore temp29
ignore temp30
ignore temp31
ignore temp32
ignore temp33
ignore temp34
ignore temp35
ignore temp36
ignore temp37
ignore temp38
ignore temp39
ignore temp40
ignore temp41
ignore temp42
ignore temp43
ignore temp44
ignore temp45
ignore temp46
ignore temp47
ignore temp48
ignore temp49
ignore temp50
ignore temp51
ignore temp52
ignore temp53
ignore temp54
ignore temp55
ignore temp56
ignore temp57
ignore temp58
ignore temp59
ignore temp60
ignore temp61
ignore temp62
ignore temp63
ignore temp64
ignore temp65
[mellanox]: Added SN3800 platform (#3262) * [mellanox]: Added SN3800 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-08-01 18:25:44 -05:00
bus "i2c-7" "i2c-1-mux (chan_id 6)"
chip "tmp102-i2c-*-49"
label temp1 "Ambient Fan Side Temp (air intake)"
chip "tmp102-i2c-*-4a"
label temp1 "Ambient Port Side Temp (air exhaust)"
bus "i2c-15" "i2c-1-mux (chan_id 6)"
chip "tmp102-i2c-15-49"
label temp1 "Ambient COMEX Temp"
# Power controllers
bus "i2c-5" "i2c-1-mux (chan_id 4)"
chip "tps53679-i2c-*-70"
[Mellanox] Fix error in sensors.conf for 3700/3700c/3800 (#4506)
2020-04-30 12:30:58 -05:00
label in1 "PMIC-1 PSU 12V Rail (in1)"
label in2 "PMIC-1 PSU 12V Rail (in2)"
label in3 "PMIC-1 ASIC 0.8V VCORE Rail (out)"
label in4 "PMIC-1 ASIC 1.2V Rail (out)"
[mellanox]: Added SN3800 platform (#3262) * [mellanox]: Added SN3800 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-08-01 18:25:44 -05:00
label temp1 "PMIC-1 Temp 1"
label temp2 "PMIC-1 Temp 2"
label power1 "PMIC-1 ASIC 0.8V VCORE Rail Pwr (out)"
label power2 "PMIC-1 ASIC 1.2V Rail Pwr (out)"
label curr1 "PMIC-1 ASIC 0.8V VCORE Rail Curr (out)"
label curr2 "PMIC-1 ASIC 1.2V Rail Curr (out)"
chip "tps53679-i2c-*-71"
[Mellanox] Fix error in sensors.conf for 3700/3700c/3800 (#4506)
2020-04-30 12:30:58 -05:00
label in1 "PMIC-2 PSU 12V Rail (in1)"
label in2 "PMIC-2 PSU 12V Rail (in2)"
label in3 "PMIC-2 GB 0.8V Rail (out)"
label in4 "PMIC-2 GB 1.125V Rail (out)"
[mellanox]: Added SN3800 platform (#3262) * [mellanox]: Added SN3800 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-08-01 18:25:44 -05:00
label temp1 "PMIC-2 Temp 1"
label temp2 "PMIC-2 Temp 2"
label power1 "PMIC-2 GB 0.8V Rail Pwr (out)"
label power2 "PMIC-2 GB 1.125V Rail Pwr (out)"
label curr1 "PMIC-2 GB 0.8V Rail Curr (out)"
label curr2 "PMIC-2 GB 1.125V Rail Curr (out)"
chip "tps53679-i2c-*-72"
[Mellanox] Fix error in sensors.conf for 3700/3700c/3800 (#4506)
2020-04-30 12:30:58 -05:00
label in1 "PMIC-3 PSU 12V Rail (in1)"
label in2 "PMIC-3 PSU 12V Rail (in2)"
label in3 "PMIC-3 ASIC 1.8V Rail (out)"
ignore in4
[mellanox]: Added SN3800 platform (#3262) * [mellanox]: Added SN3800 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-08-01 18:25:44 -05:00
label temp1 "PMIC-3 Temp 1"
label temp2 "PMIC-3 Temp 2"
label power1 "PMIC-3 ASIC 1.8V Rail Pwr (out)"
ignore power2
label curr1 "PMIC-3 ASIC 1.8V Rail Curr (out)"
ignore curr2
chip "tps53679-i2c-*-73"
[Mellanox] Fix error in sensors.conf for 3700/3700c/3800 (#4506)
2020-04-30 12:30:58 -05:00
label in1 "PMIC-4 PSU 12V Rail (in1)"
label in2 "PMIC-4 PSU 12V Rail (in2)"
label in3 "PMIC-4 GB 0.8V Rail (out)"
label in4 "PMIC-4 GB 1.125V Rail (out)"
[mellanox]: Added SN3800 platform (#3262) * [mellanox]: Added SN3800 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-08-01 18:25:44 -05:00
label temp1 "PMIC-4 Temp 1"
label temp2 "PMIC-4 Temp 2"
label power1 "PMIC-4 GB 0.8V Rail Pwr (out)"
label power2 "PMIC-4 GB 1.125V Rail Pwr (out)"
label curr1 "PMIC-4 GB 0.8V Rail Curr (out)"
label curr2 "PMIC-4 GB 1.125V Rail Curr (out)"
bus "i2c-15" "i2c-1-mux (chan_id 6)"
chip "tps53679-i2c-*-58"
[Mellanox] Fix error in sensors.conf for 3700/3700c/3800 (#4506)
2020-04-30 12:30:58 -05:00
label in1 "PMIC-5 PSU 12V Rail (in1)"
label in2 "PMIC-5 PSU 12V Rail (in2)"
label in3 "PMIC-5 COMEX 1.8V Rail (out)"
label in4 "PMIC-5 COMEX 1.05V Rail (out)"
[mellanox]: Added SN3800 platform (#3262) * [mellanox]: Added SN3800 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-08-01 18:25:44 -05:00
label temp1 "PMIC-5 Temp 1"
label temp2 "PMIC-5 Temp 2"
label power1 "PMIC-5 COMEX 1.8V Rail Pwr (out)"
label power2 "PMIC-5 COMEX 1.05V Rail Pwr (out)"
label curr1 "PMIC-5 COMEX 1.8V Rail Curr (out)"
label curr2 "PMIC-5 COMEX 1.05V Rail Curr (out)"
chip "tps53679-i2c-*-61"
[Mellanox] Fix error in sensors.conf for 3700/3700c/3800 (#4506)
2020-04-30 12:30:58 -05:00
label in1 "PMIC-6 PSU 12V Rail (in1)"
label in2 "PMIC-6 PSU 12V Rail (in2)"
label in3 "PMIC-6 COMEX 1.2V Rail (out)"
ignore in4
[mellanox]: Added SN3800 platform (#3262) * [mellanox]: Added SN3800 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-08-01 18:25:44 -05:00
label temp1 "PMIC-6 Temp 1"
label temp2 "PMIC-6 Temp 2"
label power1 "PMIC-6 COMEX 1.2V Rail Pwr (out)"
ignore power2
label curr1 "PMIC-6 COMEX 1.2V Rail Curr (out)"
ignore curr2
# Power supplies
bus "i2c-4" "i2c-1-mux (chan_id 3)"
chip "dps460-i2c-*-58"
label in1 "PSU-2 220V Rail (in)"
ignore in2
label in3 "PSU-2 12V Rail (out)"
label fan1 "PSU-2 Fan 1"
ignore fan2
ignore fan3
label temp1 "PSU-2 Temp 1"
label temp2 "PSU-2 Temp 2"
label temp3 "PSU-2 Temp 3"
label power1 "PSU-2 220V Rail Pwr (in)"
label power2 "PSU-2 12V Rail Pwr (out)"
label curr1 "PSU-2 220V Rail Curr (in)"
label curr2 "PSU-2 12V Rail Curr (out)"
[Mellanox] Auto correct PSU voltage threshold (WA) (#10394) - Why I did it There is a hardware bug that PSU voltage threshold sysfs returns incorrect value. The workaround is to call "sensor -s" to refresh it. - How I did it Call "sensor -s" when the threshold value is not incorrect and PSU is "DELTA 1100" - How to verify it Unit test and Manual test
2022-04-14 00:14:40 -05:00
set in3_lcrit in3_crit * 0.662
set in3_min in3_crit * 0.745
set in3_max in3_crit * 0.952
[Mellanox] Update the Spectrum-2 platform PSU sensor's label in the sensor conf file (#7706) #### Why I did it The label for PSU related sensors on the Spectrum-2 platform is not aligned with the physical location of the PSU. #### How I did it Update the label in the sensor conf file for those relevant platforms Signed-off-by: Kebo Liu <kebol@nvidia.com>
2021-05-25 12:41:53 -05:00
chip "dps460-i2c-*-59"
label in1 "PSU-1 220V Rail (in)"
ignore in2
label in3 "PSU-1 12V Rail (out)"
label fan1 "PSU-1 Fan 1"
ignore fan2
ignore fan3
label temp1 "PSU-1 Temp 1"
label temp2 "PSU-1 Temp 2"
label temp3 "PSU-1 Temp 3"
label power1 "PSU-1 220V Rail Pwr (in)"
label power2 "PSU-1 12V Rail Pwr (out)"
label curr1 "PSU-1 220V Rail Curr (in)"
label curr2 "PSU-1 12V Rail Curr (out)"
[Mellanox] Auto correct PSU voltage threshold (WA) (#10394) - Why I did it There is a hardware bug that PSU voltage threshold sysfs returns incorrect value. The workaround is to call "sensor -s" to refresh it. - How I did it Call "sensor -s" when the threshold value is not incorrect and PSU is "DELTA 1100" - How to verify it Unit test and Manual test
2022-04-14 00:14:40 -05:00
set in3_lcrit in3_crit * 0.662
set in3_min in3_crit * 0.745
set in3_max in3_crit * 0.952
[mellanox]: Added SN3800 platform (#3262) * [mellanox]: Added SN3800 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
2019-08-01 18:25:44 -05:00
# Chassis fans
chip "mlxreg_fan-isa-*"
label fan1 "Chassis Fan Drawer-1 Tach 1"
label fan2 "Chassis Fan Drawer-2 Tach 1"
label fan3 "Chassis Fan Drawer-3 Tach 1"
# Miscellaneous
chip "*-virtual-*"
ignore temp1
ignore temp2
Reference in New Issue Copy Permalink