sonic-buildimage/platform/barefoot/bfn-modules/modules/bf_tun.c

3698 lines
86 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/*
* TUN - Universal TUN/TAP device driver.
* Copyright (C) 1999-2002 Maxim Krasnyansky <maxk@qualcomm.com>
*
* $Id: tun.c,v 1.15 2002/03/01 02:44:24 maxk Exp $
*/
/*
* Changes:
*
* Mike Kershaw <dragorn@kismetwireless.net> 2005/08/14
* Add TUNSETLINK ioctl to set the link encapsulation
*
* Mark Smith <markzzzsmith@yahoo.com.au>
* Use eth_random_addr() for tap MAC address.
*
* Harald Roelle <harald.roelle@ifi.lmu.de> 2004/04/20
* Fixes in packet dropping, queue length setting and queue wakeup.
* Increased default tx queue length.
* Added ethtool API.
* Minor cleanups
*
* Daniel Podlejski <underley@underley.eu.org>
* Modifications for 2.3.99-pre5 kernel.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define DRV_NAME "bf_tun"
#define DRV_VERSION "1.6"
#define DRV_DESCRIPTION "Universal TUN/TAP device driver"
#define DRV_COPYRIGHT "(C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>"
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched/signal.h>
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
#include <linux/major.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/miscdevice.h>
#include <linux/ethtool.h>
#include <linux/rtnetlink.h>
#include <linux/compat.h>
#include <linux/if.h>
#include <linux/if_arp.h>
#include <linux/if_ether.h>
#include <linux/if_tun.h>
#include <linux/if_vlan.h>
#include <linux/crc32.h>
#include <linux/nsproxy.h>
#include <linux/virtio_net.h>
#include <linux/rcupdate.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <net/rtnetlink.h>
#include <net/sock.h>
#include <net/xdp.h>
#include <net/ip_tunnels.h>
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
#include <linux/seq_file.h>
#include <linux/uio.h>
#include <linux/skb_array.h>
#include <linux/bpf.h>
#include <linux/bpf_trace.h>
#include <linux/mutex.h>
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
#include <linux/uaccess.h>
#include <linux/proc_fs.h>
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
#define BF_TUN_MINOR 201
static void tun_default_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd);
#define TUN_RX_PAD (NET_IP_ALIGN + NET_SKB_PAD)
/* TUN device flags */
/* IFF_ATTACH_QUEUE is never stored in device flags,
* overload it to mean fasync when stored there.
*/
#define TUN_FASYNC IFF_ATTACH_QUEUE
/* High bits in flags field are unused. */
#define TUN_VNET_LE 0x80000000
#define TUN_VNET_BE 0x40000000
#define TUN_FEATURES (IFF_NO_PI | IFF_ONE_QUEUE | IFF_VNET_HDR | \
IFF_MULTI_QUEUE | IFF_NAPI | IFF_NAPI_FRAGS)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
#define GOODCOPY_LEN 128
#define FLT_EXACT_COUNT 8
struct tap_filter {
unsigned int count; /* Number of addrs. Zero means disabled */
u32 mask[2]; /* Mask of the hashed addrs */
unsigned char addr[FLT_EXACT_COUNT][ETH_ALEN];
};
/* MAX_TAP_QUEUES 256 is chosen to allow rx/tx queues to be equal
* to max number of VCPUs in guest. */
#define MAX_TAP_QUEUES 256
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
#define MAX_TAP_FLOWS 4096
#define TUN_FLOW_EXPIRE (3 * HZ)
struct tun_pcpu_stats {
u64_stats_t rx_packets;
u64_stats_t rx_bytes;
u64_stats_t tx_packets;
u64_stats_t tx_bytes;
struct u64_stats_sync syncp;
u32 rx_dropped;
u32 tx_dropped;
u32 rx_frame_errors;
};
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* A tun_file connects an open character device to a tuntap netdevice. It
* also contains all socket related structures (except sock_fprog and tap_filter)
* to serve as one transmit queue for tuntap device. The sock_fprog and
* tap_filter were kept in tun_struct since they were used for filtering for the
* netdevice not for a specific queue (at least I didn't see the requirement for
* this).
*
* RCU usage:
* The tun_file and tun_struct are loosely coupled, the pointer from one to the
* other can only be read while rcu_read_lock or rtnl_lock is held.
*/
struct tun_file {
struct sock sk;
struct socket socket;
struct tun_struct __rcu *tun;
struct fasync_struct *fasync;
/* only used for fasnyc */
unsigned int flags;
union {
u16 queue_index;
unsigned int ifindex;
};
struct napi_struct napi;
bool napi_enabled;
bool napi_frags_enabled;
struct mutex napi_mutex; /* Protects access to the above napi */
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct list_head next;
struct tun_struct *detached;
struct ptr_ring tx_ring;
struct xdp_rxq_info xdp_rxq;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
};
struct tun_page {
struct page *page;
int count;
};
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct tun_flow_entry {
struct hlist_node hash_link;
struct rcu_head rcu;
struct tun_struct *tun;
u32 rxhash;
u32 rps_rxhash;
int queue_index;
unsigned long updated ____cacheline_aligned_in_smp;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
};
#define TUN_NUM_FLOW_ENTRIES 1024
#define TUN_MASK_FLOW_ENTRIES (TUN_NUM_FLOW_ENTRIES - 1)
struct tun_prog {
struct rcu_head rcu;
struct bpf_prog *prog;
};
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* Since the socket were moved to tun_file, to preserve the behavior of persist
* device, socket filter, sndbuf and vnet header size were restore when the
* file were attached to a persist device.
*/
struct tun_struct {
struct tun_file __rcu *tfiles[MAX_TAP_QUEUES];
unsigned int numqueues;
unsigned int flags;
kuid_t owner;
kgid_t group;
struct net_device *dev;
netdev_features_t set_features;
#define TUN_USER_FEATURES (NETIF_F_HW_CSUM|NETIF_F_TSO_ECN|NETIF_F_TSO| \
NETIF_F_TSO6)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
int align;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
int vnet_hdr_sz;
int sndbuf;
struct tap_filter txflt;
struct sock_fprog fprog;
/* protected by rtnl lock */
bool filter_attached;
u32 msg_enable;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
spinlock_t lock;
struct hlist_head flows[TUN_NUM_FLOW_ENTRIES];
struct timer_list flow_gc_timer;
unsigned long ageing_time;
unsigned int numdisabled;
struct list_head disabled;
void *security;
u32 flow_count;
u32 rx_batched;
struct tun_pcpu_stats __percpu *pcpu_stats;
struct bpf_prog __rcu *xdp_prog;
struct tun_prog __rcu *steering_prog;
struct tun_prog __rcu *filter_prog;
struct ethtool_link_ksettings link_ksettings;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
};
struct veth {
__be16 h_vlan_proto;
__be16 h_vlan_TCI;
};
static int tun_napi_receive(struct napi_struct *napi, int budget)
{
struct tun_file *tfile = container_of(napi, struct tun_file, napi);
struct sk_buff_head *queue = &tfile->sk.sk_write_queue;
struct sk_buff_head process_queue;
struct sk_buff *skb;
int received = 0;
__skb_queue_head_init(&process_queue);
spin_lock(&queue->lock);
skb_queue_splice_tail_init(queue, &process_queue);
spin_unlock(&queue->lock);
while (received < budget && (skb = __skb_dequeue(&process_queue))) {
napi_gro_receive(napi, skb);
++received;
}
if (!skb_queue_empty(&process_queue)) {
spin_lock(&queue->lock);
skb_queue_splice(&process_queue, queue);
spin_unlock(&queue->lock);
}
return received;
}
static int tun_napi_poll(struct napi_struct *napi, int budget)
{
unsigned int received;
received = tun_napi_receive(napi, budget);
if (received < budget)
napi_complete_done(napi, received);
return received;
}
static void tun_napi_init(struct tun_struct *tun, struct tun_file *tfile,
bool napi_en, bool napi_frags)
{
tfile->napi_enabled = napi_en;
tfile->napi_frags_enabled = napi_en && napi_frags;
if (napi_en) {
netif_tx_napi_add(tun->dev, &tfile->napi, tun_napi_poll,
NAPI_POLL_WEIGHT);
napi_enable(&tfile->napi);
}
}
static void tun_napi_disable(struct tun_file *tfile)
{
if (tfile->napi_enabled)
napi_disable(&tfile->napi);
}
static void tun_napi_del(struct tun_file *tfile)
{
if (tfile->napi_enabled)
netif_napi_del(&tfile->napi);
}
static bool tun_napi_frags_enabled(const struct tun_file *tfile)
{
return tfile->napi_frags_enabled;
}
#ifdef CONFIG_TUN_VNET_CROSS_LE
static inline bool tun_legacy_is_little_endian(struct tun_struct *tun)
{
return tun->flags & TUN_VNET_BE ? false :
virtio_legacy_is_little_endian();
}
static long tun_get_vnet_be(struct tun_struct *tun, int __user *argp)
{
int be = !!(tun->flags & TUN_VNET_BE);
if (put_user(be, argp))
return -EFAULT;
return 0;
}
static long tun_set_vnet_be(struct tun_struct *tun, int __user *argp)
{
int be;
if (get_user(be, argp))
return -EFAULT;
if (be)
tun->flags |= TUN_VNET_BE;
else
tun->flags &= ~TUN_VNET_BE;
return 0;
}
#else
static inline bool tun_legacy_is_little_endian(struct tun_struct *tun)
{
return virtio_legacy_is_little_endian();
}
static long tun_get_vnet_be(struct tun_struct *tun, int __user *argp)
{
return -EINVAL;
}
static long tun_set_vnet_be(struct tun_struct *tun, int __user *argp)
{
return -EINVAL;
}
#endif /* CONFIG_TUN_VNET_CROSS_LE */
static inline bool tun_is_little_endian(struct tun_struct *tun)
{
return tun->flags & TUN_VNET_LE ||
tun_legacy_is_little_endian(tun);
}
static inline u16 tun16_to_cpu(struct tun_struct *tun, __virtio16 val)
{
return __virtio16_to_cpu(tun_is_little_endian(tun), val);
}
static inline __virtio16 cpu_to_tun16(struct tun_struct *tun, u16 val)
{
return __cpu_to_virtio16(tun_is_little_endian(tun), val);
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static inline u32 tun_hashfn(u32 rxhash)
{
return rxhash & TUN_MASK_FLOW_ENTRIES;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
static struct tun_flow_entry *tun_flow_find(struct hlist_head *head, u32 rxhash)
{
struct tun_flow_entry *e;
hlist_for_each_entry_rcu(e, head, hash_link) {
if (e->rxhash == rxhash)
return e;
}
return NULL;
}
static struct tun_flow_entry *tun_flow_create(struct tun_struct *tun,
struct hlist_head *head,
u32 rxhash, u16 queue_index)
{
struct tun_flow_entry *e = kmalloc(sizeof(*e), GFP_ATOMIC);
if (e) {
netif_info(tun, tx_queued, tun->dev,
"create flow: hash %u index %u\n",
rxhash, queue_index);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
e->updated = jiffies;
e->rxhash = rxhash;
e->rps_rxhash = 0;
e->queue_index = queue_index;
e->tun = tun;
hlist_add_head_rcu(&e->hash_link, head);
++tun->flow_count;
}
return e;
}
static void tun_flow_delete(struct tun_struct *tun, struct tun_flow_entry *e)
{
netif_info(tun, tx_queued, tun->dev, "delete flow: hash %u index %u\n",
e->rxhash, e->queue_index);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
hlist_del_rcu(&e->hash_link);
kfree_rcu(e, rcu);
--tun->flow_count;
}
static void tun_flow_flush(struct tun_struct *tun)
{
int i;
spin_lock_bh(&tun->lock);
for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) {
struct tun_flow_entry *e;
struct hlist_node *n;
hlist_for_each_entry_safe(e, n, &tun->flows[i], hash_link)
tun_flow_delete(tun, e);
}
spin_unlock_bh(&tun->lock);
}
static void tun_flow_delete_by_queue(struct tun_struct *tun, u16 queue_index)
{
int i;
spin_lock_bh(&tun->lock);
for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) {
struct tun_flow_entry *e;
struct hlist_node *n;
hlist_for_each_entry_safe(e, n, &tun->flows[i], hash_link) {
if (e->queue_index == queue_index)
tun_flow_delete(tun, e);
}
}
spin_unlock_bh(&tun->lock);
}
static void tun_flow_cleanup(struct timer_list *t)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct tun_struct *tun = from_timer(tun, t, flow_gc_timer);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
unsigned long delay = tun->ageing_time;
unsigned long next_timer = jiffies + delay;
unsigned long count = 0;
int i;
spin_lock(&tun->lock);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) {
struct tun_flow_entry *e;
struct hlist_node *n;
hlist_for_each_entry_safe(e, n, &tun->flows[i], hash_link) {
unsigned long this_timer;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
this_timer = e->updated + delay;
if (time_before_eq(this_timer, jiffies)) {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun_flow_delete(tun, e);
continue;
}
count++;
if (time_before(this_timer, next_timer))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
next_timer = this_timer;
}
}
if (count)
mod_timer(&tun->flow_gc_timer, round_jiffies_up(next_timer));
spin_unlock(&tun->lock);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
static void tun_flow_update(struct tun_struct *tun, u32 rxhash,
struct tun_file *tfile)
{
struct hlist_head *head;
struct tun_flow_entry *e;
unsigned long delay = tun->ageing_time;
u16 queue_index = tfile->queue_index;
head = &tun->flows[tun_hashfn(rxhash)];
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
rcu_read_lock();
e = tun_flow_find(head, rxhash);
if (likely(e)) {
/* TODO: keep queueing to old queue until it's empty? */
if (READ_ONCE(e->queue_index) != queue_index)
WRITE_ONCE(e->queue_index, queue_index);
if (e->updated != jiffies)
e->updated = jiffies;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
sock_rps_record_flow_hash(e->rps_rxhash);
} else {
spin_lock_bh(&tun->lock);
if (!tun_flow_find(head, rxhash) &&
tun->flow_count < MAX_TAP_FLOWS)
tun_flow_create(tun, head, rxhash, queue_index);
if (!timer_pending(&tun->flow_gc_timer))
mod_timer(&tun->flow_gc_timer,
round_jiffies_up(jiffies + delay));
spin_unlock_bh(&tun->lock);
}
rcu_read_unlock();
}
/* Save the hash received in the stack receive path and update the
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
* flow_hash table accordingly.
*/
static inline void tun_flow_save_rps_rxhash(struct tun_flow_entry *e, u32 hash)
{
if (unlikely(e->rps_rxhash != hash))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
e->rps_rxhash = hash;
}
/* We try to identify a flow through its rxhash. The reason that
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
* we do not check rxq no. is because some cards(e.g 82599), chooses
* the rxq based on the txq where the last packet of the flow comes. As
* the userspace application move between processors, we may get a
* different rxq no. here.
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
*/
static u16 tun_automq_select_queue(struct tun_struct *tun, struct sk_buff *skb)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct tun_flow_entry *e;
u32 txq = 0;
u32 numqueues = 0;
numqueues = READ_ONCE(tun->numqueues);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
txq = __skb_get_hash_symmetric(skb);
e = tun_flow_find(&tun->flows[tun_hashfn(txq)], txq);
if (e) {
tun_flow_save_rps_rxhash(e, txq);
txq = e->queue_index;
} else {
/* use multiply and shift instead of expensive divide */
txq = ((u64)txq * numqueues) >> 32;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
return txq;
}
static u16 tun_ebpf_select_queue(struct tun_struct *tun, struct sk_buff *skb)
{
struct tun_prog *prog;
u32 numqueues;
u16 ret = 0;
numqueues = READ_ONCE(tun->numqueues);
if (!numqueues)
return 0;
prog = rcu_dereference(tun->steering_prog);
if (prog)
ret = bpf_prog_run_clear_cb(prog->prog, skb);
return ret % numqueues;
}
static u16 tun_select_queue(struct net_device *dev, struct sk_buff *skb,
struct net_device *sb_dev)
{
struct tun_struct *tun = netdev_priv(dev);
u16 ret;
rcu_read_lock();
if (rcu_dereference(tun->steering_prog))
ret = tun_ebpf_select_queue(tun, skb);
else
ret = tun_automq_select_queue(tun, skb);
rcu_read_unlock();
return ret;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static inline bool tun_not_capable(struct tun_struct *tun)
{
const struct cred *cred = current_cred();
struct net *net = dev_net(tun->dev);
return ((uid_valid(tun->owner) && !uid_eq(cred->euid, tun->owner)) ||
(gid_valid(tun->group) && !in_egroup_p(tun->group))) &&
!ns_capable(net->user_ns, CAP_NET_ADMIN);
}
static void tun_set_real_num_queues(struct tun_struct *tun)
{
netif_set_real_num_tx_queues(tun->dev, tun->numqueues);
netif_set_real_num_rx_queues(tun->dev, tun->numqueues);
}
static void tun_disable_queue(struct tun_struct *tun, struct tun_file *tfile)
{
tfile->detached = tun;
list_add_tail(&tfile->next, &tun->disabled);
++tun->numdisabled;
}
static struct tun_struct *tun_enable_queue(struct tun_file *tfile)
{
struct tun_struct *tun = tfile->detached;
tfile->detached = NULL;
list_del_init(&tfile->next);
--tun->numdisabled;
return tun;
}
void tun_ptr_free(void *ptr)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
if (!ptr)
return;
if (tun_is_xdp_frame(ptr)) {
struct xdp_frame *xdpf = tun_ptr_to_xdp(ptr);
xdp_return_frame(xdpf);
} else {
__skb_array_destroy_skb(ptr);
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
EXPORT_SYMBOL_GPL(tun_ptr_free);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static void tun_queue_purge(struct tun_file *tfile)
{
void *ptr;
while ((ptr = ptr_ring_consume(&tfile->tx_ring)) != NULL)
tun_ptr_free(ptr);
skb_queue_purge(&tfile->sk.sk_write_queue);
skb_queue_purge(&tfile->sk.sk_error_queue);
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static void __tun_detach(struct tun_file *tfile, bool clean)
{
struct tun_file *ntfile;
struct tun_struct *tun;
tun = rtnl_dereference(tfile->tun);
if (tun && clean) {
tun_napi_disable(tfile);
tun_napi_del(tfile);
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (tun && !tfile->detached) {
u16 index = tfile->queue_index;
BUG_ON(index >= tun->numqueues);
rcu_assign_pointer(tun->tfiles[index],
tun->tfiles[tun->numqueues - 1]);
ntfile = rtnl_dereference(tun->tfiles[index]);
ntfile->queue_index = index;
rcu_assign_pointer(tun->tfiles[tun->numqueues - 1],
NULL);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
--tun->numqueues;
if (clean) {
RCU_INIT_POINTER(tfile->tun, NULL);
sock_put(&tfile->sk);
} else
tun_disable_queue(tun, tfile);
synchronize_net();
tun_flow_delete_by_queue(tun, tun->numqueues + 1);
/* Drop read queue */
tun_queue_purge(tfile);
tun_set_real_num_queues(tun);
} else if (tfile->detached && clean) {
tun = tun_enable_queue(tfile);
sock_put(&tfile->sk);
}
if (clean) {
if (tun && tun->numqueues == 0 && tun->numdisabled == 0) {
netif_carrier_off(tun->dev);
if (!(tun->flags & IFF_PERSIST) &&
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun->dev->reg_state == NETREG_REGISTERED)
unregister_netdevice(tun->dev);
}
if (tun)
xdp_rxq_info_unreg(&tfile->xdp_rxq);
ptr_ring_cleanup(&tfile->tx_ring, tun_ptr_free);
sock_put(&tfile->sk);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
}
static void tun_detach(struct tun_file *tfile, bool clean)
{
struct tun_struct *tun;
struct net_device *dev;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
rtnl_lock();
tun = rtnl_dereference(tfile->tun);
dev = tun ? tun->dev : NULL;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
__tun_detach(tfile, clean);
if (dev)
netdev_state_change(dev);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
rtnl_unlock();
}
static void tun_detach_all(struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
struct tun_file *tfile, *tmp;
int i, n = tun->numqueues;
for (i = 0; i < n; i++) {
tfile = rtnl_dereference(tun->tfiles[i]);
BUG_ON(!tfile);
tun_napi_disable(tfile);
tfile->socket.sk->sk_shutdown = RCV_SHUTDOWN;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tfile->socket.sk->sk_data_ready(tfile->socket.sk);
RCU_INIT_POINTER(tfile->tun, NULL);
--tun->numqueues;
}
list_for_each_entry(tfile, &tun->disabled, next) {
tfile->socket.sk->sk_shutdown = RCV_SHUTDOWN;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tfile->socket.sk->sk_data_ready(tfile->socket.sk);
RCU_INIT_POINTER(tfile->tun, NULL);
}
BUG_ON(tun->numqueues != 0);
synchronize_net();
for (i = 0; i < n; i++) {
tfile = rtnl_dereference(tun->tfiles[i]);
tun_napi_del(tfile);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* Drop read queue */
tun_queue_purge(tfile);
xdp_rxq_info_unreg(&tfile->xdp_rxq);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
sock_put(&tfile->sk);
}
list_for_each_entry_safe(tfile, tmp, &tun->disabled, next) {
tun_enable_queue(tfile);
tun_queue_purge(tfile);
xdp_rxq_info_unreg(&tfile->xdp_rxq);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
sock_put(&tfile->sk);
}
BUG_ON(tun->numdisabled != 0);
if (tun->flags & IFF_PERSIST)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
module_put(THIS_MODULE);
}
static int tun_attach(struct tun_struct *tun, struct file *file,
bool skip_filter, bool napi, bool napi_frags,
bool publish_tun)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct tun_file *tfile = file->private_data;
struct net_device *dev = tun->dev;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
int err;
err = security_tun_dev_attach(tfile->socket.sk, tun->security);
if (err < 0)
goto out;
err = -EINVAL;
if (rtnl_dereference(tfile->tun) && !tfile->detached)
goto out;
err = -EBUSY;
if (!(tun->flags & IFF_MULTI_QUEUE) && tun->numqueues == 1)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
goto out;
err = -E2BIG;
if (!tfile->detached &&
tun->numqueues + tun->numdisabled == MAX_TAP_QUEUES)
goto out;
err = 0;
/* Re-attach the filter to persist device */
if (!skip_filter && (tun->filter_attached == true)) {
lock_sock(tfile->socket.sk);
err = sk_attach_filter(&tun->fprog, tfile->socket.sk);
release_sock(tfile->socket.sk);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!err)
goto out;
}
if (!tfile->detached &&
ptr_ring_resize(&tfile->tx_ring, dev->tx_queue_len,
GFP_KERNEL, tun_ptr_free)) {
err = -ENOMEM;
goto out;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tfile->queue_index = tun->numqueues;
tfile->socket.sk->sk_shutdown &= ~RCV_SHUTDOWN;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (tfile->detached) {
/* Re-attach detached tfile, updating XDP queue_index */
WARN_ON(!xdp_rxq_info_is_reg(&tfile->xdp_rxq));
if (tfile->xdp_rxq.queue_index != tfile->queue_index)
tfile->xdp_rxq.queue_index = tfile->queue_index;
} else {
/* Setup XDP RX-queue info, for new tfile getting attached */
err = xdp_rxq_info_reg(&tfile->xdp_rxq,
tun->dev, tfile->queue_index);
if (err < 0)
goto out;
err = xdp_rxq_info_reg_mem_model(&tfile->xdp_rxq,
MEM_TYPE_PAGE_SHARED, NULL);
if (err < 0) {
xdp_rxq_info_unreg(&tfile->xdp_rxq);
goto out;
}
err = 0;
}
if (tfile->detached) {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun_enable_queue(tfile);
} else {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
sock_hold(&tfile->sk);
tun_napi_init(tun, tfile, napi, napi_frags);
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (rtnl_dereference(tun->xdp_prog))
sock_set_flag(&tfile->sk, SOCK_XDP);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* device is allowed to go away first, so no need to hold extra
* refcnt.
*/
/* Publish tfile->tun and tun->tfiles only after we've fully
* initialized tfile; otherwise we risk using half-initialized
* object.
*/
if (publish_tun)
rcu_assign_pointer(tfile->tun, tun);
rcu_assign_pointer(tun->tfiles[tun->numqueues], tfile);
tun->numqueues++;
tun_set_real_num_queues(tun);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
out:
return err;
}
static struct tun_struct *tun_get(struct tun_file *tfile)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct tun_struct *tun;
rcu_read_lock();
tun = rcu_dereference(tfile->tun);
if (tun)
dev_hold(tun->dev);
rcu_read_unlock();
return tun;
}
static void tun_put(struct tun_struct *tun)
{
dev_put(tun->dev);
}
/* TAP filtering */
static void addr_hash_set(u32 *mask, const u8 *addr)
{
int n = ether_crc(ETH_ALEN, addr) >> 26;
mask[n >> 5] |= (1 << (n & 31));
}
static unsigned int addr_hash_test(const u32 *mask, const u8 *addr)
{
int n = ether_crc(ETH_ALEN, addr) >> 26;
return mask[n >> 5] & (1 << (n & 31));
}
static int update_filter(struct tap_filter *filter, void __user *arg)
{
struct { u8 u[ETH_ALEN]; } *addr;
struct tun_filter uf;
int err, alen, n, nexact;
if (copy_from_user(&uf, arg, sizeof(uf)))
return -EFAULT;
if (!uf.count) {
/* Disabled */
filter->count = 0;
return 0;
}
alen = ETH_ALEN * uf.count;
addr = memdup_user(arg + sizeof(uf), alen);
if (IS_ERR(addr))
return PTR_ERR(addr);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* The filter is updated without holding any locks. Which is
* perfectly safe. We disable it first and in the worst
* case we'll accept a few undesired packets. */
filter->count = 0;
wmb();
/* Use first set of addresses as an exact filter */
for (n = 0; n < uf.count && n < FLT_EXACT_COUNT; n++)
memcpy(filter->addr[n], addr[n].u, ETH_ALEN);
nexact = n;
/* Remaining multicast addresses are hashed,
* unicast will leave the filter disabled. */
memset(filter->mask, 0, sizeof(filter->mask));
for (; n < uf.count; n++) {
if (!is_multicast_ether_addr(addr[n].u)) {
err = 0; /* no filter */
goto free_addr;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
addr_hash_set(filter->mask, addr[n].u);
}
/* For ALLMULTI just set the mask to all ones.
* This overrides the mask populated above. */
if ((uf.flags & TUN_FLT_ALLMULTI))
memset(filter->mask, ~0, sizeof(filter->mask));
/* Now enable the filter */
wmb();
filter->count = nexact;
/* Return the number of exact filters */
err = nexact;
free_addr:
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
kfree(addr);
return err;
}
/* Returns: 0 - drop, !=0 - accept */
static int run_filter(struct tap_filter *filter, const struct sk_buff *skb)
{
/* Cannot use eth_hdr(skb) here because skb_mac_hdr() is incorrect
* at this point. */
struct ethhdr *eh = (struct ethhdr *) skb->data;
int i;
/* Exact match */
for (i = 0; i < filter->count; i++)
if (ether_addr_equal(eh->h_dest, filter->addr[i]))
return 1;
/* Inexact match (multicast only) */
if (is_multicast_ether_addr(eh->h_dest))
return addr_hash_test(filter->mask, eh->h_dest);
return 0;
}
/*
* Checks whether the packet is accepted or not.
* Returns: 0 - drop, !=0 - accept
*/
static int check_filter(struct tap_filter *filter, const struct sk_buff *skb)
{
if (!filter->count)
return 1;
return run_filter(filter, skb);
}
/* Network device part of the driver */
static const struct ethtool_ops tun_ethtool_ops;
/* Net device detach from fd. */
static void tun_net_uninit(struct net_device *dev)
{
tun_detach_all(dev);
}
/* Net device open. */
static int tun_net_open(struct net_device *dev)
{
netif_tx_start_all_queues(dev);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return 0;
}
/* Net device close. */
static int tun_net_close(struct net_device *dev)
{
netif_tx_stop_all_queues(dev);
return 0;
}
/* Net device start xmit */
static void tun_automq_xmit(struct tun_struct *tun, struct sk_buff *skb)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
#ifdef CONFIG_RPS
if (tun->numqueues == 1 && static_branch_unlikely(&rps_needed)) {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* Select queue was not called for the skbuff, so we extract the
* RPS hash and save it into the flow_table here.
*/
struct tun_flow_entry *e;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
__u32 rxhash;
rxhash = __skb_get_hash_symmetric(skb);
e = tun_flow_find(&tun->flows[tun_hashfn(rxhash)], rxhash);
if (e)
tun_flow_save_rps_rxhash(e, rxhash);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
#endif
}
static unsigned int run_ebpf_filter(struct tun_struct *tun,
struct sk_buff *skb,
int len)
{
struct tun_prog *prog = rcu_dereference(tun->filter_prog);
if (prog)
len = bpf_prog_run_clear_cb(prog->prog, skb);
return len;
}
/* Net device start xmit */
static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
int txq = skb->queue_mapping;
struct tun_file *tfile;
int len = skb->len;
rcu_read_lock();
tfile = rcu_dereference(tun->tfiles[txq]);
/* Drop packet if interface is not attached */
if (!tfile)
goto drop;
if (!rcu_dereference(tun->steering_prog))
tun_automq_xmit(tun, skb);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
netif_info(tun, tx_queued, tun->dev, "%s %d\n", __func__, skb->len);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* Drop if the filter does not like it.
* This is a noop if the filter is disabled.
* Filter can be enabled only for the TAP devices. */
if (!check_filter(&tun->txflt, skb))
goto drop;
if (tfile->socket.sk->sk_filter &&
sk_filter(tfile->socket.sk, skb))
goto drop;
len = run_ebpf_filter(tun, skb, len);
if (len == 0 || pskb_trim(skb, len))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
goto drop;
if (unlikely(skb_orphan_frags_rx(skb, GFP_ATOMIC)))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
goto drop;
skb_tx_timestamp(skb);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* Orphan the skb - required as we might hang on to it
* for indefinite time.
*/
skb_orphan(skb);
nf_reset_ct(skb);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (ptr_ring_produce(&tfile->tx_ring, skb))
goto drop;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* Notify and wake up reader process */
if (tfile->flags & TUN_FASYNC)
kill_fasync(&tfile->fasync, SIGIO, POLL_IN);
tfile->socket.sk->sk_data_ready(tfile->socket.sk);
rcu_read_unlock();
return NETDEV_TX_OK;
drop:
this_cpu_inc(tun->pcpu_stats->tx_dropped);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
skb_tx_error(skb);
kfree_skb(skb);
rcu_read_unlock();
return NET_XMIT_DROP;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
static void tun_net_mclist(struct net_device *dev)
{
/*
* This callback is supposed to deal with mc filter in
* _rx_ path and has nothing to do with the _tx_ path.
* In rx path we always accept everything userspace gives us.
*/
}
static netdev_features_t tun_net_fix_features(struct net_device *dev,
netdev_features_t features)
{
struct tun_struct *tun = netdev_priv(dev);
return (features & tun->set_features) | (features & ~TUN_USER_FEATURES);
}
static void tun_set_headroom(struct net_device *dev, int new_hr)
{
struct tun_struct *tun = netdev_priv(dev);
if (new_hr < NET_SKB_PAD)
new_hr = NET_SKB_PAD;
tun->align = new_hr;
}
static void
tun_net_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
{
u32 rx_dropped = 0, tx_dropped = 0, rx_frame_errors = 0;
struct tun_struct *tun = netdev_priv(dev);
struct tun_pcpu_stats *p;
int i;
for_each_possible_cpu(i) {
u64 rxpackets, rxbytes, txpackets, txbytes;
unsigned int start;
p = per_cpu_ptr(tun->pcpu_stats, i);
do {
start = u64_stats_fetch_begin(&p->syncp);
rxpackets = u64_stats_read(&p->rx_packets);
rxbytes = u64_stats_read(&p->rx_bytes);
txpackets = u64_stats_read(&p->tx_packets);
txbytes = u64_stats_read(&p->tx_bytes);
} while (u64_stats_fetch_retry(&p->syncp, start));
stats->rx_packets += rxpackets;
stats->rx_bytes += rxbytes;
stats->tx_packets += txpackets;
stats->tx_bytes += txbytes;
/* u32 counters */
rx_dropped += p->rx_dropped;
rx_frame_errors += p->rx_frame_errors;
tx_dropped += p->tx_dropped;
}
stats->rx_dropped = rx_dropped;
stats->rx_frame_errors = rx_frame_errors;
stats->tx_dropped = tx_dropped;
}
static int tun_xdp_set(struct net_device *dev, struct bpf_prog *prog,
struct netlink_ext_ack *extack)
{
struct tun_struct *tun = netdev_priv(dev);
struct tun_file *tfile;
struct bpf_prog *old_prog;
int i;
old_prog = rtnl_dereference(tun->xdp_prog);
rcu_assign_pointer(tun->xdp_prog, prog);
if (old_prog)
bpf_prog_put(old_prog);
for (i = 0; i < tun->numqueues; i++) {
tfile = rtnl_dereference(tun->tfiles[i]);
if (prog)
sock_set_flag(&tfile->sk, SOCK_XDP);
else
sock_reset_flag(&tfile->sk, SOCK_XDP);
}
list_for_each_entry(tfile, &tun->disabled, next) {
if (prog)
sock_set_flag(&tfile->sk, SOCK_XDP);
else
sock_reset_flag(&tfile->sk, SOCK_XDP);
}
return 0;
}
static int tun_xdp(struct net_device *dev, struct netdev_bpf *xdp)
{
switch (xdp->command) {
case XDP_SETUP_PROG:
return tun_xdp_set(dev, xdp->prog, xdp->extack);
default:
return -EINVAL;
}
}
static int tun_net_change_carrier(struct net_device *dev, bool new_carrier)
{
if (new_carrier) {
struct tun_struct *tun = netdev_priv(dev);
if (!tun->numqueues)
return -EPERM;
netif_carrier_on(dev);
} else {
netif_carrier_off(dev);
}
return 0;
}
#define MIN_MTU 68
#define MAX_MTU 65535
static int tun_net_change_mtu(struct net_device *dev, int new_mtu)
{
if (new_mtu < MIN_MTU || new_mtu + dev->hard_header_len > MAX_MTU)
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static const struct net_device_ops tun_netdev_ops = {
.ndo_uninit = tun_net_uninit,
.ndo_open = tun_net_open,
.ndo_stop = tun_net_close,
.ndo_start_xmit = tun_net_xmit,
.ndo_fix_features = tun_net_fix_features,
.ndo_select_queue = tun_select_queue,
.ndo_set_rx_headroom = tun_set_headroom,
.ndo_get_stats64 = tun_net_get_stats64,
.ndo_change_carrier = tun_net_change_carrier,
.ndo_change_mtu = tun_net_change_mtu,
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
};
static void __tun_xdp_flush_tfile(struct tun_file *tfile)
{
/* Notify and wake up reader process */
if (tfile->flags & TUN_FASYNC)
kill_fasync(&tfile->fasync, SIGIO, POLL_IN);
tfile->socket.sk->sk_data_ready(tfile->socket.sk);
}
static int tun_xdp_xmit(struct net_device *dev, int n,
struct xdp_frame **frames, u32 flags)
{
struct tun_struct *tun = netdev_priv(dev);
struct tun_file *tfile;
u32 numqueues;
int drops = 0;
int cnt = n;
int i;
if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
return -EINVAL;
rcu_read_lock();
resample:
numqueues = READ_ONCE(tun->numqueues);
if (!numqueues) {
rcu_read_unlock();
return -ENXIO; /* Caller will free/return all frames */
}
tfile = rcu_dereference(tun->tfiles[smp_processor_id() %
numqueues]);
if (unlikely(!tfile))
goto resample;
spin_lock(&tfile->tx_ring.producer_lock);
for (i = 0; i < n; i++) {
struct xdp_frame *xdp = frames[i];
/* Encode the XDP flag into lowest bit for consumer to differ
* XDP buffer from sk_buff.
*/
void *frame = tun_xdp_to_ptr(xdp);
if (__ptr_ring_produce(&tfile->tx_ring, frame)) {
this_cpu_inc(tun->pcpu_stats->tx_dropped);
xdp_return_frame_rx_napi(xdp);
drops++;
}
}
spin_unlock(&tfile->tx_ring.producer_lock);
if (flags & XDP_XMIT_FLUSH)
__tun_xdp_flush_tfile(tfile);
rcu_read_unlock();
return cnt - drops;
}
static int tun_xdp_tx(struct net_device *dev, struct xdp_buff *xdp)
{
struct xdp_frame *frame = xdp_convert_buff_to_frame(xdp);
if (unlikely(!frame))
return -EOVERFLOW;
return tun_xdp_xmit(dev, 1, &frame, XDP_XMIT_FLUSH);
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static const struct net_device_ops tap_netdev_ops = {
.ndo_uninit = tun_net_uninit,
.ndo_open = tun_net_open,
.ndo_stop = tun_net_close,
.ndo_start_xmit = tun_net_xmit,
.ndo_fix_features = tun_net_fix_features,
.ndo_set_rx_mode = tun_net_mclist,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_select_queue = tun_select_queue,
.ndo_features_check = passthru_features_check,
.ndo_set_rx_headroom = tun_set_headroom,
.ndo_get_stats64 = tun_net_get_stats64,
.ndo_bpf = tun_xdp,
.ndo_xdp_xmit = tun_xdp_xmit,
.ndo_change_carrier = tun_net_change_carrier,
.ndo_change_mtu = tun_net_change_mtu,
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
};
static void tun_flow_init(struct tun_struct *tun)
{
int i;
for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++)
INIT_HLIST_HEAD(&tun->flows[i]);
tun->ageing_time = TUN_FLOW_EXPIRE;
timer_setup(&tun->flow_gc_timer, tun_flow_cleanup, 0);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
mod_timer(&tun->flow_gc_timer,
round_jiffies_up(jiffies + tun->ageing_time));
}
static void tun_flow_uninit(struct tun_struct *tun)
{
del_timer_sync(&tun->flow_gc_timer);
tun_flow_flush(tun);
}
/* Initialize net device. */
static void tun_net_init(struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
switch (tun->flags & TUN_TYPE_MASK) {
case IFF_TUN:
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
dev->netdev_ops = &tun_netdev_ops;
dev->header_ops = &ip_tunnel_header_ops;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* Point-to-Point TUN Device */
dev->hard_header_len = 0;
dev->addr_len = 0;
dev->mtu = 1500;
/* Zero header length */
dev->type = ARPHRD_NONE;
dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
break;
case IFF_TAP:
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
dev->netdev_ops = &tap_netdev_ops;
/* Ethernet TAP Device */
ether_setup(dev);
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
eth_hw_addr_random(dev);
break;
}
dev->min_mtu = MIN_MTU;
dev->max_mtu = MAX_MTU - dev->hard_header_len;
}
static bool tun_sock_writeable(struct tun_struct *tun, struct tun_file *tfile)
{
struct sock *sk = tfile->socket.sk;
return (tun->dev->flags & IFF_UP) && sock_writeable(sk);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
/* Character device part */
/* Poll */
static __poll_t tun_chr_poll(struct file *file, poll_table *wait)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct tun_file *tfile = file->private_data;
struct tun_struct *tun = tun_get(tfile);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct sock *sk;
__poll_t mask = 0;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!tun)
return EPOLLERR;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
sk = tfile->socket.sk;
poll_wait(file, sk_sleep(sk), wait);
if (!ptr_ring_empty(&tfile->tx_ring))
mask |= EPOLLIN | EPOLLRDNORM;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* Make sure SOCKWQ_ASYNC_NOSPACE is set if not writable to
* guarantee EPOLLOUT to be raised by either here or
* tun_sock_write_space(). Then process could get notification
* after it writes to a down device and meets -EIO.
*/
if (tun_sock_writeable(tun, tfile) ||
(!test_and_set_bit(SOCKWQ_ASYNC_NOSPACE, &sk->sk_socket->flags) &&
tun_sock_writeable(tun, tfile)))
mask |= EPOLLOUT | EPOLLWRNORM;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (tun->dev->reg_state != NETREG_REGISTERED)
mask = EPOLLERR;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun_put(tun);
return mask;
}
static struct sk_buff *tun_napi_alloc_frags(struct tun_file *tfile,
size_t len,
const struct iov_iter *it)
{
struct sk_buff *skb;
size_t linear;
int err;
int i;
if (it->nr_segs > MAX_SKB_FRAGS + 1)
return ERR_PTR(-ENOMEM);
local_bh_disable();
skb = napi_get_frags(&tfile->napi);
local_bh_enable();
if (!skb)
return ERR_PTR(-ENOMEM);
linear = iov_iter_single_seg_count(it);
err = __skb_grow(skb, linear);
if (err)
goto free;
skb->len = len;
skb->data_len = len - linear;
skb->truesize += skb->data_len;
for (i = 1; i < it->nr_segs; i++) {
size_t fragsz = it->iov[i].iov_len;
struct page *page;
void *frag;
if (fragsz == 0 || fragsz > PAGE_SIZE) {
err = -EINVAL;
goto free;
}
frag = netdev_alloc_frag(fragsz);
if (!frag) {
err = -ENOMEM;
goto free;
}
page = virt_to_head_page(frag);
skb_fill_page_desc(skb, i - 1, page,
frag - page_address(page), fragsz);
}
return skb;
free:
/* frees skb and all frags allocated with napi_alloc_frag() */
napi_free_frags(&tfile->napi);
return ERR_PTR(err);
}
/* prepad is the amount to reserve at front. len is length after that.
* linear is a hint as to how much to copy (usually headers). */
static struct sk_buff *tun_alloc_skb(struct tun_file *tfile,
size_t prepad, size_t len,
size_t linear, int noblock)
{
struct sock *sk = tfile->socket.sk;
struct sk_buff *skb;
int err;
/* Under a page? Don't bother with paged skb. */
if (prepad + len < PAGE_SIZE || !linear)
linear = len;
skb = sock_alloc_send_pskb(sk, prepad + linear, len - linear, noblock,
&err, 0);
if (!skb)
return ERR_PTR(err);
skb_reserve(skb, prepad);
skb_put(skb, linear);
skb->data_len = len - linear;
skb->len += len - linear;
return skb;
}
static void tun_rx_batched(struct tun_struct *tun, struct tun_file *tfile,
struct sk_buff *skb, int more)
{
struct sk_buff_head *queue = &tfile->sk.sk_write_queue;
struct sk_buff_head process_queue;
u32 rx_batched = tun->rx_batched;
bool rcv = false;
if (!rx_batched || (!more && skb_queue_empty(queue))) {
local_bh_disable();
skb_record_rx_queue(skb, tfile->queue_index);
netif_receive_skb(skb);
local_bh_enable();
return;
}
spin_lock(&queue->lock);
if (!more || skb_queue_len(queue) == rx_batched) {
__skb_queue_head_init(&process_queue);
skb_queue_splice_tail_init(queue, &process_queue);
rcv = true;
} else {
__skb_queue_tail(queue, skb);
}
spin_unlock(&queue->lock);
if (rcv) {
struct sk_buff *nskb;
local_bh_disable();
while ((nskb = __skb_dequeue(&process_queue))) {
skb_record_rx_queue(nskb, tfile->queue_index);
netif_receive_skb(nskb);
}
skb_record_rx_queue(skb, tfile->queue_index);
netif_receive_skb(skb);
local_bh_enable();
}
}
static bool tun_can_build_skb(struct tun_struct *tun, struct tun_file *tfile,
int len, int noblock, bool zerocopy)
{
if ((tun->flags & TUN_TYPE_MASK) != IFF_TAP)
return false;
if (tfile->socket.sk->sk_sndbuf != INT_MAX)
return false;
if (!noblock)
return false;
if (zerocopy)
return false;
if (SKB_DATA_ALIGN(len + TUN_RX_PAD) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) > PAGE_SIZE)
return false;
return true;
}
static struct sk_buff *__tun_build_skb(struct tun_file *tfile,
struct page_frag *alloc_frag, char *buf,
int buflen, int len, int pad)
{
struct sk_buff *skb = build_skb(buf, buflen);
if (!skb)
return ERR_PTR(-ENOMEM);
skb_reserve(skb, pad);
skb_put(skb, len);
skb_set_owner_w(skb, tfile->socket.sk);
get_page(alloc_frag->page);
alloc_frag->offset += buflen;
return skb;
}
static int tun_xdp_act(struct tun_struct *tun, struct bpf_prog *xdp_prog,
struct xdp_buff *xdp, u32 act)
{
int err;
switch (act) {
case XDP_REDIRECT:
err = xdp_do_redirect(tun->dev, xdp, xdp_prog);
if (err)
return err;
break;
case XDP_TX:
err = tun_xdp_tx(tun->dev, xdp);
if (err < 0)
return err;
break;
case XDP_PASS:
break;
default:
bpf_warn_invalid_xdp_action(act);
fallthrough;
case XDP_ABORTED:
trace_xdp_exception(tun->dev, xdp_prog, act);
fallthrough;
case XDP_DROP:
this_cpu_inc(tun->pcpu_stats->rx_dropped);
break;
}
return act;
}
static struct sk_buff *tun_build_skb(struct tun_struct *tun,
struct tun_file *tfile,
struct iov_iter *from,
struct virtio_net_hdr *hdr,
int len, int *skb_xdp)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct page_frag *alloc_frag = &current->task_frag;
struct bpf_prog *xdp_prog;
int buflen = SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
char *buf;
size_t copied;
int pad = TUN_RX_PAD;
int err = 0;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
rcu_read_lock();
xdp_prog = rcu_dereference(tun->xdp_prog);
if (xdp_prog)
pad += XDP_PACKET_HEADROOM;
buflen += SKB_DATA_ALIGN(len + pad);
rcu_read_unlock();
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
alloc_frag->offset = ALIGN((u64)alloc_frag->offset, SMP_CACHE_BYTES);
if (unlikely(!skb_page_frag_refill(buflen, alloc_frag, GFP_KERNEL)))
return ERR_PTR(-ENOMEM);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
buf = (char *)page_address(alloc_frag->page) + alloc_frag->offset;
copied = copy_page_from_iter(alloc_frag->page,
alloc_frag->offset + pad,
len, from);
if (copied != len)
return ERR_PTR(-EFAULT);
/* There's a small window that XDP may be set after the check
* of xdp_prog above, this should be rare and for simplicity
* we do XDP on skb in case the headroom is not enough.
*/
if (hdr->gso_type || !xdp_prog) {
*skb_xdp = 1;
return __tun_build_skb(tfile, alloc_frag, buf, buflen, len,
pad);
}
*skb_xdp = 0;
local_bh_disable();
rcu_read_lock();
xdp_prog = rcu_dereference(tun->xdp_prog);
if (xdp_prog) {
struct xdp_buff xdp;
u32 act;
xdp.data_hard_start = buf;
xdp.data = buf + pad;
xdp_set_data_meta_invalid(&xdp);
xdp.data_end = xdp.data + len;
xdp.rxq = &tfile->xdp_rxq;
xdp.frame_sz = buflen;
act = bpf_prog_run_xdp(xdp_prog, &xdp);
if (act == XDP_REDIRECT || act == XDP_TX) {
get_page(alloc_frag->page);
alloc_frag->offset += buflen;
}
err = tun_xdp_act(tun, xdp_prog, &xdp, act);
if (err < 0) {
if (act == XDP_REDIRECT || act == XDP_TX)
put_page(alloc_frag->page);
goto out;
}
if (err == XDP_REDIRECT)
xdp_do_flush();
if (err != XDP_PASS)
goto out;
pad = xdp.data - xdp.data_hard_start;
len = xdp.data_end - xdp.data;
}
rcu_read_unlock();
local_bh_enable();
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return __tun_build_skb(tfile, alloc_frag, buf, buflen, len, pad);
out:
rcu_read_unlock();
local_bh_enable();
return NULL;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
/* Get packet from user space buffer */
static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
void *msg_control, struct iov_iter *from,
int noblock, bool more)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct tun_pi pi = { 0, cpu_to_be16(ETH_P_IP) };
struct sk_buff *skb;
size_t total_len = iov_iter_count(from);
size_t len = total_len, align = tun->align, linear;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct virtio_net_hdr gso = { 0 };
struct tun_pcpu_stats *stats;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
int good_linear;
int copylen;
bool zerocopy = false;
int err;
u32 rxhash = 0;
int skb_xdp = 1;
bool frags = tun_napi_frags_enabled(tfile);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!(tun->flags & IFF_NO_PI)) {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (len < sizeof(pi))
return -EINVAL;
len -= sizeof(pi);
if (!copy_from_iter_full(&pi, sizeof(pi), from))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return -EFAULT;
}
if (tun->flags & IFF_VNET_HDR) {
int vnet_hdr_sz = READ_ONCE(tun->vnet_hdr_sz);
if (len < vnet_hdr_sz)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return -EINVAL;
len -= vnet_hdr_sz;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!copy_from_iter_full(&gso, sizeof(gso), from))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return -EFAULT;
if ((gso.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) &&
tun16_to_cpu(tun, gso.csum_start) + tun16_to_cpu(tun, gso.csum_offset) + 2 > tun16_to_cpu(tun, gso.hdr_len))
gso.hdr_len = cpu_to_tun16(tun, tun16_to_cpu(tun, gso.csum_start) + tun16_to_cpu(tun, gso.csum_offset) + 2);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (tun16_to_cpu(tun, gso.hdr_len) > len)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return -EINVAL;
iov_iter_advance(from, vnet_hdr_sz - sizeof(gso));
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
if ((tun->flags & TUN_TYPE_MASK) == IFF_TAP) {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
align += NET_IP_ALIGN;
if (unlikely(len < ETH_HLEN ||
(gso.hdr_len && tun16_to_cpu(tun, gso.hdr_len) < ETH_HLEN)))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return -EINVAL;
}
good_linear = SKB_MAX_HEAD(align);
if (msg_control) {
struct iov_iter i = *from;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* There are 256 bytes to be copied in skb, so there is
* enough room for skb expand head in case it is used.
* The rest of the buffer is mapped from userspace.
*/
copylen = gso.hdr_len ? tun16_to_cpu(tun, gso.hdr_len) : GOODCOPY_LEN;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (copylen > good_linear)
copylen = good_linear;
linear = copylen;
iov_iter_advance(&i, copylen);
if (iov_iter_npages(&i, INT_MAX) <= MAX_SKB_FRAGS)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
zerocopy = true;
}
if (!frags && tun_can_build_skb(tun, tfile, len, noblock, zerocopy)) {
/* For the packet that is not easy to be processed
* (e.g gso or jumbo packet), we will do it at after
* skb was created with generic XDP routine.
*/
skb = tun_build_skb(tun, tfile, from, &gso, len, &skb_xdp);
if (IS_ERR(skb)) {
this_cpu_inc(tun->pcpu_stats->rx_dropped);
return PTR_ERR(skb);
}
if (!skb)
return total_len;
} else {
if (!zerocopy) {
copylen = len;
if (tun16_to_cpu(tun, gso.hdr_len) > good_linear)
linear = good_linear;
else
linear = tun16_to_cpu(tun, gso.hdr_len);
}
if (frags) {
mutex_lock(&tfile->napi_mutex);
skb = tun_napi_alloc_frags(tfile, copylen, from);
/* tun_napi_alloc_frags() enforces a layout for the skb.
* If zerocopy is enabled, then this layout will be
* overwritten by zerocopy_sg_from_iter().
*/
zerocopy = false;
} else {
skb = tun_alloc_skb(tfile, align, copylen, linear,
noblock);
}
if (IS_ERR(skb)) {
if (PTR_ERR(skb) != -EAGAIN)
this_cpu_inc(tun->pcpu_stats->rx_dropped);
if (frags)
mutex_unlock(&tfile->napi_mutex);
return PTR_ERR(skb);
}
if (zerocopy)
err = zerocopy_sg_from_iter(skb, from);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
else
err = skb_copy_datagram_from_iter(skb, 0, from, len);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (err) {
err = -EFAULT;
drop:
this_cpu_inc(tun->pcpu_stats->rx_dropped);
kfree_skb(skb);
if (frags) {
tfile->napi.skb = NULL;
mutex_unlock(&tfile->napi_mutex);
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return err;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
if (virtio_net_hdr_to_skb(skb, &gso, tun_is_little_endian(tun))) {
this_cpu_inc(tun->pcpu_stats->rx_frame_errors);
kfree_skb(skb);
if (frags) {
tfile->napi.skb = NULL;
mutex_unlock(&tfile->napi_mutex);
}
return -EINVAL;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
switch (tun->flags & TUN_TYPE_MASK) {
case IFF_TUN:
if (tun->flags & IFF_NO_PI) {
u8 ip_version = skb->len ? (skb->data[0] >> 4) : 0;
switch (ip_version) {
case 4:
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
pi.proto = htons(ETH_P_IP);
break;
case 6:
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
pi.proto = htons(ETH_P_IPV6);
break;
default:
this_cpu_inc(tun->pcpu_stats->rx_dropped);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
kfree_skb(skb);
return -EINVAL;
}
}
skb_reset_mac_header(skb);
skb->protocol = pi.proto;
skb->dev = tun->dev;
break;
case IFF_TAP:
if (frags && !pskb_may_pull(skb, ETH_HLEN)) {
err = -ENOMEM;
goto drop;
}
skb->protocol = eth_type_trans(skb, tun->dev);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
}
/* copy skb_ubuf_info for callback when skb has no error */
if (zerocopy) {
skb_shinfo(skb)->destructor_arg = msg_control;
skb_shinfo(skb)->tx_flags |= SKBTX_DEV_ZEROCOPY;
skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG;
} else if (msg_control) {
struct ubuf_info *uarg = msg_control;
uarg->callback(uarg, false);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
skb_reset_network_header(skb);
skb_probe_transport_header(skb);
skb_record_rx_queue(skb, tfile->queue_index);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (skb_xdp) {
struct bpf_prog *xdp_prog;
int ret;
local_bh_disable();
rcu_read_lock();
xdp_prog = rcu_dereference(tun->xdp_prog);
if (xdp_prog) {
ret = do_xdp_generic(xdp_prog, skb);
if (ret != XDP_PASS) {
rcu_read_unlock();
local_bh_enable();
if (frags) {
tfile->napi.skb = NULL;
mutex_unlock(&tfile->napi_mutex);
}
return total_len;
}
}
rcu_read_unlock();
local_bh_enable();
}
/* Compute the costly rx hash only if needed for flow updates.
* We may get a very small possibility of OOO during switching, not
* worth to optimize.
*/
if (!rcu_access_pointer(tun->steering_prog) && tun->numqueues > 1 &&
!tfile->detached)
rxhash = __skb_get_hash_symmetric(skb);
rcu_read_lock();
if (unlikely(!(tun->dev->flags & IFF_UP))) {
err = -EIO;
rcu_read_unlock();
goto drop;
}
if (frags) {
u32 headlen;
/* Exercise flow dissector code path. */
skb_push(skb, ETH_HLEN);
headlen = eth_get_headlen(tun->dev, skb->data,
skb_headlen(skb));
if (unlikely(headlen > skb_headlen(skb))) {
this_cpu_inc(tun->pcpu_stats->rx_dropped);
napi_free_frags(&tfile->napi);
rcu_read_unlock();
mutex_unlock(&tfile->napi_mutex);
WARN_ON(1);
return -ENOMEM;
}
local_bh_disable();
napi_gro_frags(&tfile->napi);
local_bh_enable();
mutex_unlock(&tfile->napi_mutex);
} else if (tfile->napi_enabled) {
struct sk_buff_head *queue = &tfile->sk.sk_write_queue;
int queue_len;
spin_lock_bh(&queue->lock);
__skb_queue_tail(queue, skb);
queue_len = skb_queue_len(queue);
spin_unlock(&queue->lock);
if (!more || queue_len > NAPI_POLL_WEIGHT)
napi_schedule(&tfile->napi);
local_bh_enable();
} else if (!IS_ENABLED(CONFIG_4KSTACKS)) {
tun_rx_batched(tun, tfile, skb, more);
} else {
netif_rx_ni(skb);
}
rcu_read_unlock();
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
stats = get_cpu_ptr(tun->pcpu_stats);
u64_stats_update_begin(&stats->syncp);
u64_stats_inc(&stats->rx_packets);
u64_stats_add(&stats->rx_bytes, len);
u64_stats_update_end(&stats->syncp);
put_cpu_ptr(stats);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (rxhash)
tun_flow_update(tun, rxhash, tfile);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return total_len;
}
static ssize_t tun_chr_write_iter(struct kiocb *iocb, struct iov_iter *from)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct file *file = iocb->ki_filp;
struct tun_file *tfile = file->private_data;
struct tun_struct *tun = tun_get(tfile);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
ssize_t result;
int noblock = 0;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!tun)
return -EBADFD;
if ((file->f_flags & O_NONBLOCK) || (iocb->ki_flags & IOCB_NOWAIT))
noblock = 1;
result = tun_get_user(tun, tfile, NULL, from, noblock, false);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun_put(tun);
return result;
}
static ssize_t tun_put_user_xdp(struct tun_struct *tun,
struct tun_file *tfile,
struct xdp_frame *xdp_frame,
struct iov_iter *iter)
{
int vnet_hdr_sz = 0;
size_t size = xdp_frame->len;
struct tun_pcpu_stats *stats;
size_t ret;
if (tun->flags & IFF_VNET_HDR) {
struct virtio_net_hdr gso = { 0 };
vnet_hdr_sz = READ_ONCE(tun->vnet_hdr_sz);
if (unlikely(iov_iter_count(iter) < vnet_hdr_sz))
return -EINVAL;
if (unlikely(copy_to_iter(&gso, sizeof(gso), iter) !=
sizeof(gso)))
return -EFAULT;
iov_iter_advance(iter, vnet_hdr_sz - sizeof(gso));
}
ret = copy_to_iter(xdp_frame->data, size, iter) + vnet_hdr_sz;
stats = get_cpu_ptr(tun->pcpu_stats);
u64_stats_update_begin(&stats->syncp);
u64_stats_inc(&stats->tx_packets);
u64_stats_add(&stats->tx_bytes, ret);
u64_stats_update_end(&stats->syncp);
put_cpu_ptr(tun->pcpu_stats);
return ret;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* Put packet to the user space buffer */
static ssize_t tun_put_user(struct tun_struct *tun,
struct tun_file *tfile,
struct sk_buff *skb,
struct iov_iter *iter)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct tun_pi pi = { 0, skb->protocol };
struct tun_pcpu_stats *stats;
ssize_t total;
int vlan_offset = 0;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
int vlan_hlen = 0;
int vnet_hdr_sz = 0;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (skb_vlan_tag_present(skb))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
vlan_hlen = VLAN_HLEN;
if (tun->flags & IFF_VNET_HDR)
vnet_hdr_sz = READ_ONCE(tun->vnet_hdr_sz);
total = skb->len + vlan_hlen + vnet_hdr_sz;
if (!(tun->flags & IFF_NO_PI)) {
if (iov_iter_count(iter) < sizeof(pi))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return -EINVAL;
total += sizeof(pi);
if (iov_iter_count(iter) < total) {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
/* Packet will be striped */
pi.flags |= TUN_PKT_STRIP;
}
if (copy_to_iter(&pi, sizeof(pi), iter) != sizeof(pi))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return -EFAULT;
}
if (vnet_hdr_sz) {
struct virtio_net_hdr gso;
if (iov_iter_count(iter) < vnet_hdr_sz)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return -EINVAL;
if (virtio_net_hdr_from_skb(skb, &gso,
tun_is_little_endian(tun), true,
vlan_hlen)) {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct skb_shared_info *sinfo = skb_shinfo(skb);
pr_err("unexpected GSO type: "
"0x%x, gso_size %d, hdr_len %d\n",
sinfo->gso_type, tun16_to_cpu(tun, gso.gso_size),
tun16_to_cpu(tun, gso.hdr_len));
print_hex_dump(KERN_ERR, "tun: ",
DUMP_PREFIX_NONE,
16, 1, skb->head,
min((int)tun16_to_cpu(tun, gso.hdr_len), 64), true);
WARN_ON_ONCE(1);
return -EINVAL;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (copy_to_iter(&gso, sizeof(gso), iter) != sizeof(gso))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return -EFAULT;
iov_iter_advance(iter, vnet_hdr_sz - sizeof(gso));
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
if (vlan_hlen) {
int ret;
struct veth veth;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
veth.h_vlan_proto = skb->vlan_proto;
veth.h_vlan_TCI = htons(skb_vlan_tag_get(skb));
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
vlan_offset = offsetof(struct vlan_ethhdr, h_vlan_proto);
ret = skb_copy_datagram_iter(skb, 0, iter, vlan_offset);
if (ret || !iov_iter_count(iter))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
goto done;
ret = copy_to_iter(&veth, sizeof(veth), iter);
if (ret != sizeof(veth) || !iov_iter_count(iter))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
goto done;
}
skb_copy_datagram_iter(skb, vlan_offset, iter, skb->len - vlan_offset);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
done:
/* caller is in process context, */
stats = get_cpu_ptr(tun->pcpu_stats);
u64_stats_update_begin(&stats->syncp);
u64_stats_inc(&stats->tx_packets);
u64_stats_add(&stats->tx_bytes, skb->len + vlan_hlen);
u64_stats_update_end(&stats->syncp);
put_cpu_ptr(tun->pcpu_stats);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return total;
}
static void *tun_ring_recv(struct tun_file *tfile, int noblock, int *err)
{
DECLARE_WAITQUEUE(wait, current);
void *ptr = NULL;
int error = 0;
ptr = ptr_ring_consume(&tfile->tx_ring);
if (ptr)
goto out;
if (noblock) {
error = -EAGAIN;
goto out;
}
add_wait_queue(&tfile->socket.wq.wait, &wait);
while (1) {
set_current_state(TASK_INTERRUPTIBLE);
ptr = ptr_ring_consume(&tfile->tx_ring);
if (ptr)
break;
if (signal_pending(current)) {
error = -ERESTARTSYS;
break;
}
if (tfile->socket.sk->sk_shutdown & RCV_SHUTDOWN) {
error = -EFAULT;
break;
}
schedule();
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(&tfile->socket.wq.wait, &wait);
out:
*err = error;
return ptr;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile,
struct iov_iter *to,
int noblock, void *ptr)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
ssize_t ret;
int err;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!iov_iter_count(to)) {
tun_ptr_free(ptr);
return 0;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!ptr) {
/* Read frames from ring */
ptr = tun_ring_recv(tfile, noblock, &err);
if (!ptr)
return err;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (tun_is_xdp_frame(ptr)) {
struct xdp_frame *xdpf = tun_ptr_to_xdp(ptr);
ret = tun_put_user_xdp(tun, tfile, xdpf, to);
xdp_return_frame(xdpf);
} else {
struct sk_buff *skb = ptr;
ret = tun_put_user(tun, tfile, skb, to);
if (unlikely(ret < 0))
kfree_skb(skb);
else
consume_skb(skb);
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return ret;
}
static ssize_t tun_chr_read_iter(struct kiocb *iocb, struct iov_iter *to)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct file *file = iocb->ki_filp;
struct tun_file *tfile = file->private_data;
struct tun_struct *tun = tun_get(tfile);
ssize_t len = iov_iter_count(to), ret;
int noblock = 0;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!tun)
return -EBADFD;
if ((file->f_flags & O_NONBLOCK) || (iocb->ki_flags & IOCB_NOWAIT))
noblock = 1;
ret = tun_do_read(tun, tfile, to, noblock, NULL);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
ret = min_t(ssize_t, ret, len);
if (ret > 0)
iocb->ki_pos = ret;
tun_put(tun);
return ret;
}
static void tun_prog_free(struct rcu_head *rcu)
{
struct tun_prog *prog = container_of(rcu, struct tun_prog, rcu);
bpf_prog_destroy(prog->prog);
kfree(prog);
}
static int __tun_set_ebpf(struct tun_struct *tun,
struct tun_prog __rcu **prog_p,
struct bpf_prog *prog)
{
struct tun_prog *old, *new = NULL;
if (prog) {
new = kmalloc(sizeof(*new), GFP_KERNEL);
if (!new)
return -ENOMEM;
new->prog = prog;
}
spin_lock_bh(&tun->lock);
old = rcu_dereference_protected(*prog_p,
lockdep_is_held(&tun->lock));
rcu_assign_pointer(*prog_p, new);
spin_unlock_bh(&tun->lock);
if (old)
call_rcu(&old->rcu, tun_prog_free);
return 0;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static void tun_free_netdev(struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
BUG_ON(!(list_empty(&tun->disabled)));
free_percpu(tun->pcpu_stats);
/* We clear pcpu_stats so that tun_set_iff() can tell if
* tun_free_netdev() has been called from register_netdevice().
*/
tun->pcpu_stats = NULL;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun_flow_uninit(tun);
security_tun_dev_free_security(tun->security);
__tun_set_ebpf(tun, &tun->steering_prog, NULL);
__tun_set_ebpf(tun, &tun->filter_prog, NULL);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
static void tun_setup(struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
tun->owner = INVALID_UID;
tun->group = INVALID_GID;
tun_default_link_ksettings(dev, &tun->link_ksettings);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
dev->ethtool_ops = &tun_ethtool_ops;
dev->needs_free_netdev = true;
dev->priv_destructor = tun_free_netdev;
/* We prefer our own queue length */
dev->tx_queue_len = TUN_READQ_SIZE;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
/* Trivial set of netlink ops to allow deleting tun or tap
* device with netlink.
*/
static int tun_validate(struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
NL_SET_ERR_MSG(extack,
"tun/tap creation via rtnetlink is not supported.");
return -EOPNOTSUPP;
}
static size_t tun_get_size(const struct net_device *dev)
{
BUILD_BUG_ON(sizeof(u32) != sizeof(uid_t));
BUILD_BUG_ON(sizeof(u32) != sizeof(gid_t));
return nla_total_size(sizeof(uid_t)) + /* OWNER */
nla_total_size(sizeof(gid_t)) + /* GROUP */
nla_total_size(sizeof(u8)) + /* TYPE */
nla_total_size(sizeof(u8)) + /* PI */
nla_total_size(sizeof(u8)) + /* VNET_HDR */
nla_total_size(sizeof(u8)) + /* PERSIST */
nla_total_size(sizeof(u8)) + /* MULTI_QUEUE */
nla_total_size(sizeof(u32)) + /* NUM_QUEUES */
nla_total_size(sizeof(u32)) + /* NUM_DISABLED_QUEUES */
0;
}
static int tun_fill_info(struct sk_buff *skb, const struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
if (nla_put_u8(skb, IFLA_TUN_TYPE, tun->flags & TUN_TYPE_MASK))
goto nla_put_failure;
if (uid_valid(tun->owner) &&
nla_put_u32(skb, IFLA_TUN_OWNER,
from_kuid_munged(current_user_ns(), tun->owner)))
goto nla_put_failure;
if (gid_valid(tun->group) &&
nla_put_u32(skb, IFLA_TUN_GROUP,
from_kgid_munged(current_user_ns(), tun->group)))
goto nla_put_failure;
if (nla_put_u8(skb, IFLA_TUN_PI, !(tun->flags & IFF_NO_PI)))
goto nla_put_failure;
if (nla_put_u8(skb, IFLA_TUN_VNET_HDR, !!(tun->flags & IFF_VNET_HDR)))
goto nla_put_failure;
if (nla_put_u8(skb, IFLA_TUN_PERSIST, !!(tun->flags & IFF_PERSIST)))
goto nla_put_failure;
if (nla_put_u8(skb, IFLA_TUN_MULTI_QUEUE,
!!(tun->flags & IFF_MULTI_QUEUE)))
goto nla_put_failure;
if (tun->flags & IFF_MULTI_QUEUE) {
if (nla_put_u32(skb, IFLA_TUN_NUM_QUEUES, tun->numqueues))
goto nla_put_failure;
if (nla_put_u32(skb, IFLA_TUN_NUM_DISABLED_QUEUES,
tun->numdisabled))
goto nla_put_failure;
}
return 0;
nla_put_failure:
return -EMSGSIZE;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
static struct rtnl_link_ops tun_link_ops __read_mostly = {
.kind = DRV_NAME,
.priv_size = sizeof(struct tun_struct),
.setup = tun_setup,
.validate = tun_validate,
.get_size = tun_get_size,
.fill_info = tun_fill_info,
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
};
static void tun_sock_write_space(struct sock *sk)
{
struct tun_file *tfile;
wait_queue_head_t *wqueue;
if (!sock_writeable(sk))
return;
if (!test_and_clear_bit(SOCKWQ_ASYNC_NOSPACE, &sk->sk_socket->flags))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return;
wqueue = sk_sleep(sk);
if (wqueue && waitqueue_active(wqueue))
wake_up_interruptible_sync_poll(wqueue, EPOLLOUT |
EPOLLWRNORM | EPOLLWRBAND);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tfile = container_of(sk, struct tun_file, sk);
kill_fasync(&tfile->fasync, SIGIO, POLL_OUT);
}
static void tun_put_page(struct tun_page *tpage)
{
if (tpage->page)
__page_frag_cache_drain(tpage->page, tpage->count);
}
static int tun_xdp_one(struct tun_struct *tun,
struct tun_file *tfile,
struct xdp_buff *xdp, int *flush,
struct tun_page *tpage)
{
unsigned int datasize = xdp->data_end - xdp->data;
struct tun_xdp_hdr *hdr = xdp->data_hard_start;
struct virtio_net_hdr *gso = &hdr->gso;
struct tun_pcpu_stats *stats;
struct bpf_prog *xdp_prog;
struct sk_buff *skb = NULL;
u32 rxhash = 0, act;
int buflen = hdr->buflen;
int err = 0;
bool skb_xdp = false;
struct page *page;
xdp_prog = rcu_dereference(tun->xdp_prog);
if (xdp_prog) {
if (gso->gso_type) {
skb_xdp = true;
goto build;
}
xdp_set_data_meta_invalid(xdp);
xdp->rxq = &tfile->xdp_rxq;
xdp->frame_sz = buflen;
act = bpf_prog_run_xdp(xdp_prog, xdp);
err = tun_xdp_act(tun, xdp_prog, xdp, act);
if (err < 0) {
put_page(virt_to_head_page(xdp->data));
return err;
}
switch (err) {
case XDP_REDIRECT:
*flush = true;
fallthrough;
case XDP_TX:
return 0;
case XDP_PASS:
break;
default:
page = virt_to_head_page(xdp->data);
if (tpage->page == page) {
++tpage->count;
} else {
tun_put_page(tpage);
tpage->page = page;
tpage->count = 1;
}
return 0;
}
}
build:
skb = build_skb(xdp->data_hard_start, buflen);
if (!skb) {
err = -ENOMEM;
goto out;
}
skb_reserve(skb, xdp->data - xdp->data_hard_start);
skb_put(skb, xdp->data_end - xdp->data);
if (virtio_net_hdr_to_skb(skb, gso, tun_is_little_endian(tun))) {
this_cpu_inc(tun->pcpu_stats->rx_frame_errors);
kfree_skb(skb);
err = -EINVAL;
goto out;
}
skb->protocol = eth_type_trans(skb, tun->dev);
skb_reset_network_header(skb);
skb_probe_transport_header(skb);
skb_record_rx_queue(skb, tfile->queue_index);
if (skb_xdp) {
err = do_xdp_generic(xdp_prog, skb);
if (err != XDP_PASS)
goto out;
}
if (!rcu_dereference(tun->steering_prog) && tun->numqueues > 1 &&
!tfile->detached)
rxhash = __skb_get_hash_symmetric(skb);
netif_receive_skb(skb);
/* No need for get_cpu_ptr() here since this function is
* always called with bh disabled
*/
stats = this_cpu_ptr(tun->pcpu_stats);
u64_stats_update_begin(&stats->syncp);
u64_stats_inc(&stats->rx_packets);
u64_stats_add(&stats->rx_bytes, datasize);
u64_stats_update_end(&stats->syncp);
if (rxhash)
tun_flow_update(tun, rxhash, tfile);
out:
return err;
}
static int tun_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
int ret, i;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct tun_file *tfile = container_of(sock, struct tun_file, socket);
struct tun_struct *tun = tun_get(tfile);
struct tun_msg_ctl *ctl = m->msg_control;
struct xdp_buff *xdp;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!tun)
return -EBADFD;
if (ctl && (ctl->type == TUN_MSG_PTR)) {
struct tun_page tpage;
int n = ctl->num;
int flush = 0;
memset(&tpage, 0, sizeof(tpage));
local_bh_disable();
rcu_read_lock();
for (i = 0; i < n; i++) {
xdp = &((struct xdp_buff *)ctl->ptr)[i];
tun_xdp_one(tun, tfile, xdp, &flush, &tpage);
}
if (flush)
xdp_do_flush();
rcu_read_unlock();
local_bh_enable();
tun_put_page(&tpage);
ret = total_len;
goto out;
}
ret = tun_get_user(tun, tfile, ctl ? ctl->ptr : NULL, &m->msg_iter,
m->msg_flags & MSG_DONTWAIT,
m->msg_flags & MSG_MORE);
out:
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun_put(tun);
return ret;
}
static int tun_recvmsg(struct socket *sock, struct msghdr *m, size_t total_len,
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
int flags)
{
struct tun_file *tfile = container_of(sock, struct tun_file, socket);
struct tun_struct *tun = tun_get(tfile);
void *ptr = m->msg_control;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
int ret;
if (!tun) {
ret = -EBADFD;
goto out_free;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (flags & ~(MSG_DONTWAIT|MSG_TRUNC|MSG_ERRQUEUE)) {
ret = -EINVAL;
goto out_put_tun;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
if (flags & MSG_ERRQUEUE) {
ret = sock_recv_errqueue(sock->sk, m, total_len,
SOL_PACKET, TUN_TX_TIMESTAMP);
goto out;
}
ret = tun_do_read(tun, tfile, &m->msg_iter, flags & MSG_DONTWAIT, ptr);
if (ret > (ssize_t)total_len) {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
m->msg_flags |= MSG_TRUNC;
ret = flags & MSG_TRUNC ? ret : total_len;
}
out:
tun_put(tun);
return ret;
out_put_tun:
tun_put(tun);
out_free:
tun_ptr_free(ptr);
return ret;
}
static int tun_ptr_peek_len(void *ptr)
{
if (likely(ptr)) {
if (tun_is_xdp_frame(ptr)) {
struct xdp_frame *xdpf = tun_ptr_to_xdp(ptr);
return xdpf->len;
}
return __skb_array_len_with_tag(ptr);
} else {
return 0;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
static int tun_peek_len(struct socket *sock)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct tun_file *tfile = container_of(sock, struct tun_file, socket);
struct tun_struct *tun;
int ret = 0;
tun = tun_get(tfile);
if (!tun)
return 0;
ret = PTR_RING_PEEK_CALL(&tfile->tx_ring, tun_ptr_peek_len);
tun_put(tun);
return ret;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
/* Ops structure to mimic raw sockets with tun */
static const struct proto_ops tun_socket_ops = {
.peek_len = tun_peek_len,
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
.sendmsg = tun_sendmsg,
.recvmsg = tun_recvmsg,
};
static struct proto tun_proto = {
.name = "tun",
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
.owner = THIS_MODULE,
.obj_size = sizeof(struct tun_file),
};
static int tun_flags(struct tun_struct *tun)
{
return tun->flags & (TUN_FEATURES | IFF_PERSIST | IFF_TUN | IFF_TAP);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
static ssize_t tun_show_flags(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct tun_struct *tun = netdev_priv(to_net_dev(dev));
return sprintf(buf, "0x%x\n", tun_flags(tun));
}
static ssize_t tun_show_owner(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct tun_struct *tun = netdev_priv(to_net_dev(dev));
return uid_valid(tun->owner)?
sprintf(buf, "%u\n",
from_kuid_munged(current_user_ns(), tun->owner)):
sprintf(buf, "-1\n");
}
static ssize_t tun_show_group(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct tun_struct *tun = netdev_priv(to_net_dev(dev));
return gid_valid(tun->group) ?
sprintf(buf, "%u\n",
from_kgid_munged(current_user_ns(), tun->group)):
sprintf(buf, "-1\n");
}
static DEVICE_ATTR(tun_flags, 0444, tun_show_flags, NULL);
static DEVICE_ATTR(owner, 0444, tun_show_owner, NULL);
static DEVICE_ATTR(group, 0444, tun_show_group, NULL);
static struct attribute *tun_dev_attrs[] = {
&dev_attr_tun_flags.attr,
&dev_attr_owner.attr,
&dev_attr_group.attr,
NULL
};
static const struct attribute_group tun_attr_group = {
.attrs = tun_dev_attrs
};
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
{
struct tun_struct *tun;
struct tun_file *tfile = file->private_data;
struct net_device *dev;
int err;
if (tfile->detached)
return -EINVAL;
if ((ifr->ifr_flags & IFF_NAPI_FRAGS)) {
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (!(ifr->ifr_flags & IFF_NAPI) ||
(ifr->ifr_flags & TUN_TYPE_MASK) != IFF_TAP)
return -EINVAL;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
dev = __dev_get_by_name(net, ifr->ifr_name);
if (dev) {
if (ifr->ifr_flags & IFF_TUN_EXCL)
return -EBUSY;
if ((ifr->ifr_flags & IFF_TUN) && dev->netdev_ops == &tun_netdev_ops)
tun = netdev_priv(dev);
else if ((ifr->ifr_flags & IFF_TAP) && dev->netdev_ops == &tap_netdev_ops)
tun = netdev_priv(dev);
else
return -EINVAL;
if (!!(ifr->ifr_flags & IFF_MULTI_QUEUE) !=
!!(tun->flags & IFF_MULTI_QUEUE))
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return -EINVAL;
if (tun_not_capable(tun))
return -EPERM;
err = security_tun_dev_open(tun->security);
if (err < 0)
return err;
err = tun_attach(tun, file, ifr->ifr_flags & IFF_NOFILTER,
ifr->ifr_flags & IFF_NAPI,
ifr->ifr_flags & IFF_NAPI_FRAGS, true);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (err < 0)
return err;
if (tun->flags & IFF_MULTI_QUEUE &&
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
(tun->numqueues + tun->numdisabled > 1)) {
/* One or more queue has already been attached, no need
* to initialize the device again.
*/
netdev_state_change(dev);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return 0;
}
tun->flags = (tun->flags & ~TUN_FEATURES) |
(ifr->ifr_flags & TUN_FEATURES);
netdev_state_change(dev);
} else {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
char *name;
unsigned long flags = 0;
int queues = ifr->ifr_flags & IFF_MULTI_QUEUE ?
MAX_TAP_QUEUES : 1;
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
return -EPERM;
err = security_tun_dev_create();
if (err < 0)
return err;
/* Set dev type */
if (ifr->ifr_flags & IFF_TUN) {
/* TUN device */
flags |= IFF_TUN;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
name = "tun%d";
} else if (ifr->ifr_flags & IFF_TAP) {
/* TAP device */
flags |= IFF_TAP;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
name = "tap%d";
} else
return -EINVAL;
if (*ifr->ifr_name)
name = ifr->ifr_name;
dev = alloc_netdev_mqs(sizeof(struct tun_struct), name,
NET_NAME_UNKNOWN, tun_setup, queues,
queues);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!dev)
return -ENOMEM;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
dev_net_set(dev, net);
dev->rtnl_link_ops = &tun_link_ops;
dev->ifindex = tfile->ifindex;
dev->sysfs_groups[0] = &tun_attr_group;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun = netdev_priv(dev);
tun->dev = dev;
tun->flags = flags;
tun->txflt.count = 0;
tun->vnet_hdr_sz = sizeof(struct virtio_net_hdr);
tun->align = NET_SKB_PAD;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun->filter_attached = false;
tun->sndbuf = tfile->socket.sk->sk_sndbuf;
tun->rx_batched = 0;
RCU_INIT_POINTER(tun->steering_prog, NULL);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun->pcpu_stats = netdev_alloc_pcpu_stats(struct tun_pcpu_stats);
if (!tun->pcpu_stats) {
err = -ENOMEM;
goto err_free_dev;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
spin_lock_init(&tun->lock);
err = security_tun_dev_alloc_security(&tun->security);
if (err < 0)
goto err_free_stat;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun_net_init(dev);
tun_flow_init(tun);
dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST |
TUN_USER_FEATURES | NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_STAG_TX;
dev->features = dev->hw_features | NETIF_F_LLTX;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
dev->vlan_features = dev->features &
~(NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_STAG_TX);
tun->flags = (tun->flags & ~TUN_FEATURES) |
(ifr->ifr_flags & TUN_FEATURES);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
INIT_LIST_HEAD(&tun->disabled);
err = tun_attach(tun, file, false, ifr->ifr_flags & IFF_NAPI,
ifr->ifr_flags & IFF_NAPI_FRAGS, false);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (err < 0)
goto err_free_flow;
err = register_netdevice(tun->dev);
if (err < 0)
goto err_detach;
/* free_netdev() won't check refcnt, to aovid race
* with dev_put() we need publish tun after registration.
*/
rcu_assign_pointer(tfile->tun, tun);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
netif_carrier_on(tun->dev);
/* Make sure persistent devices do not get stuck in
* xoff state.
*/
if (netif_running(tun->dev))
netif_tx_wake_all_queues(tun->dev);
strcpy(ifr->ifr_name, tun->dev->name);
return 0;
err_detach:
tun_detach_all(dev);
/* We are here because register_netdevice() has failed.
* If register_netdevice() already called tun_free_netdev()
* while dealing with the error, tun->pcpu_stats has been cleared.
*/
if (!tun->pcpu_stats)
goto err_free_dev;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
err_free_flow:
tun_flow_uninit(tun);
security_tun_dev_free_security(tun->security);
err_free_stat:
free_percpu(tun->pcpu_stats);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
err_free_dev:
free_netdev(dev);
return err;
}
static void tun_get_iff(struct tun_struct *tun, struct ifreq *ifr)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
strcpy(ifr->ifr_name, tun->dev->name);
ifr->ifr_flags = tun_flags(tun);
}
/* This is like a cut-down ethtool ops, except done via tun fd so no
* privs required. */
static int set_offload(struct tun_struct *tun, unsigned long arg)
{
netdev_features_t features = 0;
if (arg & TUN_F_CSUM) {
features |= NETIF_F_HW_CSUM;
arg &= ~TUN_F_CSUM;
if (arg & (TUN_F_TSO4|TUN_F_TSO6)) {
if (arg & TUN_F_TSO_ECN) {
features |= NETIF_F_TSO_ECN;
arg &= ~TUN_F_TSO_ECN;
}
if (arg & TUN_F_TSO4)
features |= NETIF_F_TSO;
if (arg & TUN_F_TSO6)
features |= NETIF_F_TSO6;
arg &= ~(TUN_F_TSO4|TUN_F_TSO6);
}
arg &= ~TUN_F_UFO;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
/* This gives the user a way to test for new features in future by
* trying to set them. */
if (arg)
return -EINVAL;
tun->set_features = features;
tun->dev->wanted_features &= ~TUN_USER_FEATURES;
tun->dev->wanted_features |= features;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
netdev_update_features(tun->dev);
return 0;
}
static void tun_detach_filter(struct tun_struct *tun, int n)
{
int i;
struct tun_file *tfile;
for (i = 0; i < n; i++) {
tfile = rtnl_dereference(tun->tfiles[i]);
lock_sock(tfile->socket.sk);
sk_detach_filter(tfile->socket.sk);
release_sock(tfile->socket.sk);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
tun->filter_attached = false;
}
static int tun_attach_filter(struct tun_struct *tun)
{
int i, ret = 0;
struct tun_file *tfile;
for (i = 0; i < tun->numqueues; i++) {
tfile = rtnl_dereference(tun->tfiles[i]);
lock_sock(tfile->socket.sk);
ret = sk_attach_filter(&tun->fprog, tfile->socket.sk);
release_sock(tfile->socket.sk);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (ret) {
tun_detach_filter(tun, i);
return ret;
}
}
tun->filter_attached = true;
return ret;
}
static void tun_set_sndbuf(struct tun_struct *tun)
{
struct tun_file *tfile;
int i;
for (i = 0; i < tun->numqueues; i++) {
tfile = rtnl_dereference(tun->tfiles[i]);
tfile->socket.sk->sk_sndbuf = tun->sndbuf;
}
}
static int tun_set_queue(struct file *file, struct ifreq *ifr)
{
struct tun_file *tfile = file->private_data;
struct tun_struct *tun;
int ret = 0;
rtnl_lock();
if (ifr->ifr_flags & IFF_ATTACH_QUEUE) {
tun = tfile->detached;
if (!tun) {
ret = -EINVAL;
goto unlock;
}
ret = security_tun_dev_attach_queue(tun->security);
if (ret < 0)
goto unlock;
ret = tun_attach(tun, file, false, tun->flags & IFF_NAPI,
tun->flags & IFF_NAPI_FRAGS, true);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
} else if (ifr->ifr_flags & IFF_DETACH_QUEUE) {
tun = rtnl_dereference(tfile->tun);
if (!tun || !(tun->flags & IFF_MULTI_QUEUE) || tfile->detached)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
ret = -EINVAL;
else
__tun_detach(tfile, false);
} else
ret = -EINVAL;
if (ret >= 0)
netdev_state_change(tun->dev);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
unlock:
rtnl_unlock();
return ret;
}
static int tun_set_ebpf(struct tun_struct *tun, struct tun_prog __rcu **prog_p,
void __user *data)
{
struct bpf_prog *prog;
int fd;
if (copy_from_user(&fd, data, sizeof(fd)))
return -EFAULT;
if (fd == -1) {
prog = NULL;
} else {
prog = bpf_prog_get_type(fd, BPF_PROG_TYPE_SOCKET_FILTER);
if (IS_ERR(prog))
return PTR_ERR(prog);
}
return __tun_set_ebpf(tun, prog_p, prog);
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
unsigned long arg, int ifreq_len)
{
struct tun_file *tfile = file->private_data;
struct net *net = sock_net(&tfile->sk);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct tun_struct *tun;
void __user* argp = (void __user*)arg;
unsigned int ifindex, carrier;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct ifreq ifr;
kuid_t owner;
kgid_t group;
int sndbuf;
int vnet_hdr_sz;
int le;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
int ret;
bool do_notify = false;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (cmd == TUNSETIFF || cmd == TUNSETQUEUE ||
(_IOC_TYPE(cmd) == SOCK_IOC_TYPE && cmd != SIOCGSKNS)) {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (copy_from_user(&ifr, argp, ifreq_len))
return -EFAULT;
} else {
memset(&ifr, 0, sizeof(ifr));
}
if (cmd == TUNGETFEATURES) {
/* Currently this just means: "what IFF flags are valid?".
* This is needed because we never checked for invalid flags on
* TUNSETIFF.
*/
return put_user(IFF_TUN | IFF_TAP | TUN_FEATURES,
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
(unsigned int __user*)argp);
} else if (cmd == TUNSETQUEUE) {
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return tun_set_queue(file, &ifr);
} else if (cmd == SIOCGSKNS) {
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
return -EPERM;
return open_related_ns(&net->ns, get_net_ns);
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
ret = 0;
rtnl_lock();
tun = tun_get(tfile);
if (cmd == TUNSETIFF) {
ret = -EEXIST;
if (tun)
goto unlock;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
ifr.ifr_name[IFNAMSIZ-1] = '\0';
ret = tun_set_iff(net, file, &ifr);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (ret)
goto unlock;
if (copy_to_user(argp, &ifr, ifreq_len))
ret = -EFAULT;
goto unlock;
}
if (cmd == TUNSETIFINDEX) {
ret = -EPERM;
if (tun)
goto unlock;
ret = -EFAULT;
if (copy_from_user(&ifindex, argp, sizeof(ifindex)))
goto unlock;
ret = 0;
tfile->ifindex = ifindex;
goto unlock;
}
ret = -EBADFD;
if (!tun)
goto unlock;
netif_info(tun, drv, tun->dev, "tun_chr_ioctl cmd %u\n", cmd);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
net = dev_net(tun->dev);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
ret = 0;
switch (cmd) {
case TUNGETIFF:
tun_get_iff(tun, &ifr);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (tfile->detached)
ifr.ifr_flags |= IFF_DETACH_QUEUE;
if (!tfile->socket.sk->sk_filter)
ifr.ifr_flags |= IFF_NOFILTER;
if (copy_to_user(argp, &ifr, ifreq_len))
ret = -EFAULT;
break;
case TUNSETNOCSUM:
/* Disable/Enable checksum */
/* [unimplemented] */
netif_info(tun, drv, tun->dev, "ignored: set checksum %s\n",
arg ? "disabled" : "enabled");
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
case TUNSETPERSIST:
/* Disable/Enable persist mode. Keep an extra reference to the
* module to prevent the module being unprobed.
*/
if (arg && !(tun->flags & IFF_PERSIST)) {
tun->flags |= IFF_PERSIST;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
__module_get(THIS_MODULE);
do_notify = true;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
if (!arg && (tun->flags & IFF_PERSIST)) {
tun->flags &= ~IFF_PERSIST;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
module_put(THIS_MODULE);
do_notify = true;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
netif_info(tun, drv, tun->dev, "persist %s\n",
arg ? "enabled" : "disabled");
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
case TUNSETOWNER:
/* Set owner of the device */
owner = make_kuid(current_user_ns(), arg);
if (!uid_valid(owner)) {
ret = -EINVAL;
break;
}
tun->owner = owner;
do_notify = true;
netif_info(tun, drv, tun->dev, "owner set to %u\n",
from_kuid(&init_user_ns, tun->owner));
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
case TUNSETGROUP:
/* Set group of the device */
group = make_kgid(current_user_ns(), arg);
if (!gid_valid(group)) {
ret = -EINVAL;
break;
}
tun->group = group;
do_notify = true;
netif_info(tun, drv, tun->dev, "group set to %u\n",
from_kgid(&init_user_ns, tun->group));
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
case TUNSETLINK:
/* Only allow setting the type when the interface is down */
if (tun->dev->flags & IFF_UP) {
netif_info(tun, drv, tun->dev,
"Linktype set failed because interface is up\n");
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
ret = -EBUSY;
} else {
tun->dev->type = (int) arg;
netif_info(tun, drv, tun->dev, "linktype set to %d\n",
tun->dev->type);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
ret = 0;
}
break;
case TUNSETDEBUG:
tun->msg_enable = (u32)arg;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
case TUNSETOFFLOAD:
ret = set_offload(tun, arg);
break;
case TUNSETTXFILTER:
/* Can be set only for TAPs */
ret = -EINVAL;
if ((tun->flags & TUN_TYPE_MASK) != IFF_TAP)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
ret = update_filter(&tun->txflt, (void __user *)arg);
break;
case SIOCGIFHWADDR:
/* Get hw address */
memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN);
ifr.ifr_hwaddr.sa_family = tun->dev->type;
if (copy_to_user(argp, &ifr, ifreq_len))
ret = -EFAULT;
break;
case SIOCSIFHWADDR:
/* Set hw address */
ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr, NULL);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
case TUNGETSNDBUF:
sndbuf = tfile->socket.sk->sk_sndbuf;
if (copy_to_user(argp, &sndbuf, sizeof(sndbuf)))
ret = -EFAULT;
break;
case TUNSETSNDBUF:
if (copy_from_user(&sndbuf, argp, sizeof(sndbuf))) {
ret = -EFAULT;
break;
}
if (sndbuf <= 0) {
ret = -EINVAL;
break;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tun->sndbuf = sndbuf;
tun_set_sndbuf(tun);
break;
case TUNGETVNETHDRSZ:
vnet_hdr_sz = tun->vnet_hdr_sz;
if (copy_to_user(argp, &vnet_hdr_sz, sizeof(vnet_hdr_sz)))
ret = -EFAULT;
break;
case TUNSETVNETHDRSZ:
if (copy_from_user(&vnet_hdr_sz, argp, sizeof(vnet_hdr_sz))) {
ret = -EFAULT;
break;
}
if (vnet_hdr_sz < (int)sizeof(struct virtio_net_hdr)) {
ret = -EINVAL;
break;
}
tun->vnet_hdr_sz = vnet_hdr_sz;
break;
case TUNGETVNETLE:
le = !!(tun->flags & TUN_VNET_LE);
if (put_user(le, (int __user *)argp))
ret = -EFAULT;
break;
case TUNSETVNETLE:
if (get_user(le, (int __user *)argp)) {
ret = -EFAULT;
break;
}
if (le)
tun->flags |= TUN_VNET_LE;
else
tun->flags &= ~TUN_VNET_LE;
break;
case TUNGETVNETBE:
ret = tun_get_vnet_be(tun, argp);
break;
case TUNSETVNETBE:
ret = tun_set_vnet_be(tun, argp);
break;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
case TUNATTACHFILTER:
/* Can be set only for TAPs */
ret = -EINVAL;
if ((tun->flags & TUN_TYPE_MASK) != IFF_TAP)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
ret = -EFAULT;
if (copy_from_user(&tun->fprog, argp, sizeof(tun->fprog)))
break;
ret = tun_attach_filter(tun);
break;
case TUNDETACHFILTER:
/* Can be set only for TAPs */
ret = -EINVAL;
if ((tun->flags & TUN_TYPE_MASK) != IFF_TAP)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
ret = 0;
tun_detach_filter(tun, tun->numqueues);
break;
case TUNGETFILTER:
ret = -EINVAL;
if ((tun->flags & TUN_TYPE_MASK) != IFF_TAP)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
ret = -EFAULT;
if (copy_to_user(argp, &tun->fprog, sizeof(tun->fprog)))
break;
ret = 0;
break;
case TUNSETSTEERINGEBPF:
ret = tun_set_ebpf(tun, &tun->steering_prog, argp);
break;
case TUNSETFILTEREBPF:
ret = tun_set_ebpf(tun, &tun->filter_prog, argp);
break;
case TUNSETCARRIER:
ret = -EFAULT;
if (copy_from_user(&carrier, argp, sizeof(carrier)))
goto unlock;
ret = tun_net_change_carrier(tun->dev, (bool)carrier);
break;
case TUNGETDEVNETNS:
ret = -EPERM;
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
goto unlock;
ret = open_related_ns(&net->ns, get_net_ns);
break;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
default:
ret = -EINVAL;
break;
}
if (do_notify)
netdev_state_change(tun->dev);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
unlock:
rtnl_unlock();
if (tun)
tun_put(tun);
return ret;
}
static long tun_chr_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
return __tun_chr_ioctl(file, cmd, arg, sizeof (struct ifreq));
}
#ifdef CONFIG_COMPAT
static long tun_chr_compat_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case TUNSETIFF:
case TUNGETIFF:
case TUNSETTXFILTER:
case TUNGETSNDBUF:
case TUNSETSNDBUF:
case SIOCGIFHWADDR:
case SIOCSIFHWADDR:
arg = (unsigned long)compat_ptr(arg);
break;
default:
arg = (compat_ulong_t)arg;
break;
}
/*
* compat_ifreq is shorter than ifreq, so we must not access beyond
* the end of that structure. All fields that are used in this
* driver are compatible though, we don't need to convert the
* contents.
*/
return __tun_chr_ioctl(file, cmd, arg, sizeof(struct compat_ifreq));
}
#endif /* CONFIG_COMPAT */
static int tun_chr_fasync(int fd, struct file *file, int on)
{
struct tun_file *tfile = file->private_data;
int ret;
if ((ret = fasync_helper(fd, file, on, &tfile->fasync)) < 0)
goto out;
if (on) {
__f_setown(file, task_pid(current), PIDTYPE_TGID, 0);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tfile->flags |= TUN_FASYNC;
} else
tfile->flags &= ~TUN_FASYNC;
ret = 0;
out:
return ret;
}
static int tun_chr_open(struct inode *inode, struct file * file)
{
struct net *net = current->nsproxy->net_ns;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct tun_file *tfile;
tfile = (struct tun_file *)sk_alloc(net, AF_UNSPEC, GFP_KERNEL,
&tun_proto, 0);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (!tfile)
return -ENOMEM;
if (ptr_ring_init(&tfile->tx_ring, 0, GFP_KERNEL)) {
sk_free(&tfile->sk);
return -ENOMEM;
}
mutex_init(&tfile->napi_mutex);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
RCU_INIT_POINTER(tfile->tun, NULL);
tfile->flags = 0;
tfile->ifindex = 0;
init_waitqueue_head(&tfile->socket.wq.wait);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
tfile->socket.file = file;
tfile->socket.ops = &tun_socket_ops;
sock_init_data(&tfile->socket, &tfile->sk);
tfile->sk.sk_write_space = tun_sock_write_space;
tfile->sk.sk_sndbuf = INT_MAX;
file->private_data = tfile;
INIT_LIST_HEAD(&tfile->next);
sock_set_flag(&tfile->sk, SOCK_ZEROCOPY);
return 0;
}
static int tun_chr_close(struct inode *inode, struct file *file)
{
struct tun_file *tfile = file->private_data;
tun_detach(tfile, true);
return 0;
}
#ifdef CONFIG_PROC_FS
static void tun_chr_show_fdinfo(struct seq_file *m, struct file *file)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct tun_file *tfile = file->private_data;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct tun_struct *tun;
struct ifreq ifr;
memset(&ifr, 0, sizeof(ifr));
rtnl_lock();
tun = tun_get(tfile);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
if (tun)
tun_get_iff(tun, &ifr);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
rtnl_unlock();
if (tun)
tun_put(tun);
seq_printf(m, "iff:\t%s\n", ifr.ifr_name);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
#endif
static const struct file_operations tun_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read_iter = tun_chr_read_iter,
.write_iter = tun_chr_write_iter,
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
.poll = tun_chr_poll,
.unlocked_ioctl = tun_chr_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = tun_chr_compat_ioctl,
#endif
.open = tun_chr_open,
.release = tun_chr_close,
.fasync = tun_chr_fasync,
#ifdef CONFIG_PROC_FS
.show_fdinfo = tun_chr_show_fdinfo,
#endif
};
static struct miscdevice tun_miscdev = {
.minor = BF_TUN_MINOR,
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
.name = "bf_tun",
.nodename = "net/bf_tun",
.fops = &tun_fops,
};
/* ethtool interface */
static void tun_default_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
ethtool_link_ksettings_zero_link_mode(cmd, supported);
ethtool_link_ksettings_zero_link_mode(cmd, advertising);
cmd->base.speed = SPEED_10;
cmd->base.duplex = DUPLEX_FULL;
cmd->base.port = PORT_TP;
cmd->base.phy_address = 0;
cmd->base.autoneg = AUTONEG_DISABLE;
}
static int tun_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
struct tun_struct *tun = netdev_priv(dev);
memcpy(cmd, &tun->link_ksettings, sizeof(*cmd));
return 0;
}
static int tun_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
{
struct tun_struct *tun = netdev_priv(dev);
memcpy(&tun->link_ksettings, cmd, sizeof(*cmd));
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return 0;
}
static void tun_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
struct tun_struct *tun = netdev_priv(dev);
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
switch (tun->flags & TUN_TYPE_MASK) {
case IFF_TUN:
strlcpy(info->bus_info, "tun", sizeof(info->bus_info));
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
break;
case IFF_TAP:
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
strlcpy(info->bus_info, "tap", sizeof(info->bus_info));
break;
}
}
static u32 tun_get_msglevel(struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
return tun->msg_enable;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
static void tun_set_msglevel(struct net_device *dev, u32 value)
{
struct tun_struct *tun = netdev_priv(dev);
tun->msg_enable = value;
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
static int tun_get_coalesce(struct net_device *dev,
struct ethtool_coalesce *ec)
{
struct tun_struct *tun = netdev_priv(dev);
ec->rx_max_coalesced_frames = tun->rx_batched;
return 0;
}
static int tun_set_coalesce(struct net_device *dev,
struct ethtool_coalesce *ec)
{
struct tun_struct *tun = netdev_priv(dev);
if (ec->rx_max_coalesced_frames > NAPI_POLL_WEIGHT)
tun->rx_batched = NAPI_POLL_WEIGHT;
else
tun->rx_batched = ec->rx_max_coalesced_frames;
return 0;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static const struct ethtool_ops tun_ethtool_ops = {
.supported_coalesce_params = ETHTOOL_COALESCE_RX_MAX_FRAMES,
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
.get_drvinfo = tun_get_drvinfo,
.get_msglevel = tun_get_msglevel,
.set_msglevel = tun_set_msglevel,
.get_link = ethtool_op_get_link,
.get_ts_info = ethtool_op_get_ts_info,
.get_coalesce = tun_get_coalesce,
.set_coalesce = tun_set_coalesce,
.get_link_ksettings = tun_get_link_ksettings,
.set_link_ksettings = tun_set_link_ksettings,
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
};
static int tun_queue_resize(struct tun_struct *tun)
{
struct net_device *dev = tun->dev;
struct tun_file *tfile;
struct ptr_ring **rings;
int n = tun->numqueues + tun->numdisabled;
int ret, i;
rings = kmalloc_array(n, sizeof(*rings), GFP_KERNEL);
if (!rings)
return -ENOMEM;
for (i = 0; i < tun->numqueues; i++) {
tfile = rtnl_dereference(tun->tfiles[i]);
rings[i] = &tfile->tx_ring;
}
list_for_each_entry(tfile, &tun->disabled, next)
rings[i++] = &tfile->tx_ring;
ret = ptr_ring_resize_multiple(rings, n,
dev->tx_queue_len, GFP_KERNEL,
tun_ptr_free);
kfree(rings);
return ret;
}
static int tun_device_event(struct notifier_block *unused,
unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct tun_struct *tun = netdev_priv(dev);
int i;
if (dev->rtnl_link_ops != &tun_link_ops)
return NOTIFY_DONE;
switch (event) {
case NETDEV_CHANGE_TX_QUEUE_LEN:
if (tun_queue_resize(tun))
return NOTIFY_BAD;
break;
case NETDEV_UP:
for (i = 0; i < tun->numqueues; i++) {
struct tun_file *tfile;
tfile = rtnl_dereference(tun->tfiles[i]);
tfile->socket.sk->sk_write_space(tfile->socket.sk);
}
break;
default:
break;
}
return NOTIFY_DONE;
}
static struct notifier_block tun_notifier_block __read_mostly = {
.notifier_call = tun_device_event,
};
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
static int __init tun_init(void)
{
int ret = 0;
pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
ret = rtnl_link_register(&tun_link_ops);
if (ret) {
pr_err("Can't register link_ops\n");
goto err_linkops;
}
ret = misc_register(&tun_miscdev);
if (ret) {
pr_err("Can't register misc device %d\n", BF_TUN_MINOR);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
goto err_misc;
}
ret = register_netdevice_notifier(&tun_notifier_block);
if (ret) {
pr_err("Can't register netdevice notifier\n");
goto err_notifier;
}
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
return 0;
err_notifier:
misc_deregister(&tun_miscdev);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
err_misc:
rtnl_link_unregister(&tun_link_ops);
err_linkops:
return ret;
}
static void tun_cleanup(void)
{
misc_deregister(&tun_miscdev);
rtnl_link_unregister(&tun_link_ops);
unregister_netdevice_notifier(&tun_notifier_block);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
}
/* Get an underlying socket object from tun file. Returns error unless file is
* attached to a device. The returned object works like a packet socket, it
* can be used for sock_sendmsg/sock_recvmsg. The caller is responsible for
* holding a reference to the file for as long as the socket is in use. */
struct socket *tun_get_socket(struct file *file)
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
{
struct tun_file *tfile;
if (file->f_op != &tun_fops)
return ERR_PTR(-EINVAL);
tfile = file->private_data;
if (!tfile)
return ERR_PTR(-EBADFD);
return &tfile->socket;
}
EXPORT_SYMBOL_GPL(tun_get_socket);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
struct ptr_ring *tun_get_tx_ring(struct file *file)
{
struct tun_file *tfile;
if (file->f_op != &tun_fops)
return ERR_PTR(-EINVAL);
tfile = file->private_data;
if (!tfile)
return ERR_PTR(-EBADFD);
return &tfile->tx_ring;
}
EXPORT_SYMBOL_GPL(tun_get_tx_ring);
[barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn.service for init barefoot. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <chihen.he@gmail.com> * Add bfn service in debian Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <chihen.he@gmail.com> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <chihen.he@gmail.com> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <chihen.he@gmail.com> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <chihen.he@gmail.com> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <chihen.he@gmail.com> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <yang.kaiyu@gmail.com> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <chihen.he@gmail.com> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <chihen.he@gmail.com> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
2018-07-24 12:23:12 -05:00
module_init(tun_init);
module_exit(tun_cleanup);
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_AUTHOR(DRV_COPYRIGHT);
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(BF_TUN_MINOR);
MODULE_ALIAS("devname:net/bf_tun");