Gitea Helm Chart

Gitea is a community managed lightweight code hosting solution written in Go. It is published under the MIT license.

Introduction

This helm chart has taken some inspiration from jfelten's helm chart. But takes a completely different approach in providing a database and cache with dependencies. Additionally, this chart provides LDAP and admin user configuration with values, as well as being deployed as a statefulset to retain stored repositories.

Dependencies

Gitea can be run with an external database and cache. This chart provides those dependencies, which can be enabled, or disabled via configuration.

Dependencies:

• PostgreSQL (configuration)
• Memcached (configuration)
• MySQL (configuration)
• MariaDB (configuration)

Installing

helm repo add gitea-charts https://dl.gitea.io/charts/
helm repo update
helm install gitea gitea-charts/gitea

When upgrading, please refer to the Upgrading section at the bottom of this document for major and breaking changes.

Prerequisites

• Kubernetes 1.12+
• Helm 3.0+
• PV provisioner for persistent data support

Examples

Gitea Configuration

Gitea offers lots of configuration options. This is fully described in the Gitea Cheat Sheet.

gitea:
  config:
    APP_NAME: "Gitea: With a cup of tea."
    repository:
      ROOT: "~/gitea-repositories"
    repository.pull-request:
      WORK_IN_PROGRESS_PREFIXES: "WIP:,[WIP]:"

Default Configuration

This chart will set a few defaults in the Gitea configuration based on the service and ingress settings. All defaults can be overwritten in gitea.config.

INSTALL_LOCK is always set to true, since we want to configure Gitea with this helm chart and everything is taken care of.

All default settings are made directly in the generated app.ini, not in the Values.

Database defaults

If a builtIn database is enabled the database configuration is set automatically. For example, PostgreSQL builtIn will appear in the app.ini as:

[database]
DB_TYPE = postgres
HOST = RELEASE-NAME-postgresql.default.svc.cluster.local:5432
NAME = gitea
PASSWD = gitea
USER = gitea

Memcached defaults

Memcached is handled the exact same way as database builtIn. Once Memcached builtIn is enabled, this chart will generate the following part in the app.ini:

[cache]
ADAPTER = memcache
ENABLED = true
HOST = RELEASE-NAME-memcached.default.svc.cluster.local:11211

Server defaults

The server defaults are a bit more complex. If ingress is enabled, the ROOT_URL, DOMAIN and SSH_DOMAIN will be set accordingly. HTTP_PORT always defaults to 3000 as well as SSH_PORT to 22.

[server]
APP_DATA_PATH = /data
DOMAIN = git.example.com
HTTP_PORT = 3000
PROTOCOL = http
ROOT_URL = http://git.example.com
SSH_DOMAIN = git.example.com
SSH_LISTEN_PORT = 22
SSH_PORT = 22
ENABLE_PPROF = false

Metrics defaults

The Prometheus /metrics endpoint is disabled by default.

[metrics]
ENABLED = false

Additional app.ini settings

The generic section cannot be defined that way.

Some settings inside app.ini (like passwords or whole authentication configurations) must be considered sensitive and therefore should not be passed via plain text inside the values.yaml file. In times of GitOps the values.yaml could be stored in a Git repository where sensitive data should never be accessible.

The Helm Chart supports this approach and let the user define custom sources like Kubernetes Secrets to be loaded as environment variables during app.ini creation or update.

gitea:
  additionalConfigSources:
    - secret:
        secretName: gitea-app-ini-oauth
    - configMap:
        name: gitea-app-ini-plaintext

This would mount the two additional volumes (oauth and some-additionals) from different sources to the init containerwhere the app.ini gets updated. All files mounted that way will be read and converted to environment variables and then added to the app.ini using environment-to-ini.

The key of such additional source represents the section inside the app.ini. The value for each key can be multiline ini-like definitions.

In example, the referenced gitea-app-ini-plaintext could look like this.

apiVersion: v1
kind: ConfigMap
metadata:
  name: gitea-app-ini-plaintext
data:
  session: |
    PROVIDER=memory
    SAME_SITE=strict    
  cron.archive_cleanup: |
    ENABLED=true    

Or when using a Kubernetes secret, having the same data structure:

apiVersion: v1
kind: Secret
metadata:
  name: gitea-security-related-configuration
type: Opaque
stringData:
  security: |
    PASSWORD_COMPLEXITY=off    
  session: |
    SAME_SITE=strict    

User defined environment variables in app.ini

Users are able to define their own environment variables, which are loaded into the containers. We also support to directly interact with the generated app.ini.

To inject self defined variables into the app.ini a certain format needs to be honored. This is described in detail on the env-to-ini page.

Note that the Prefix on this helm chart is ENV_TO_INI.

For example a database setting needs to have the following format:

gitea:
  additionalConfigFromEnvs:
    - name: ENV_TO_INI__DATABASE__HOST
      value: my.own.host
    - name: ENV_TO_INI__DATABASE__PASSWD
      valueFrom:
        secretKeyRef:
          name: postgres-secret
          key: password

Priority (highest to lowest) for defining app.ini variables:

1. Environment variables prefixed with ENV_TO_INI
2. Additional config sources
3. Values defined in gitea.config

External Database

An external Database can be used instead of builtIn PostgreSQL or MySQL.

gitea:
  config:
    database:
      DB_TYPE: mysql
      HOST: 127.0.0.1:3306
      NAME: gitea
      USER: root
      PASSWD: gitea
      SCHEMA: gitea

postgresql:
  enabled: false

Ports and external url

By default port 3000 is used for web traffic and 22 for ssh. Those can be changed:

service:
  http:
    port: 3000
  ssh:
    port: 22

This helm chart automatically configures the clone urls to use the correct ports. You can change these ports by hand using the gitea.config dict. However you should know what you're doing.

ClusterIP

By default the clusterIP will be set to None, which is the default for headless services. However if you want to omit the clusterIP field in the service, use the following values:

service:
  http:
    type: ClusterIP
    port: 3000
    clusterIP:
  ssh:
    type: ClusterIP
    port: 22
    clusterIP:

SSH and Ingress

If you're using ingress and want to use SSH, keep in mind, that ingress is not able to forward SSH Ports. You will need a LoadBalancer like metallb and a setting in your ssh service annotations.

service:
  ssh:
    annotations:
      metallb.universe.tf/allow-shared-ip: test

SSH on crio based kubernetes cluster

If you use crio as container runtime it is not possible to read from a remote repository. You should get an error message like this:

$ git clone git@k8s-demo.internal:admin/test.git
Cloning into 'test'...
Connection reset by 192.168.179.217 port 22
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

To solve this problem add the capability SYS_CHROOT to the securityContext. More about this issue here.

Cache

This helm chart can use a built in cache. The default is Memcached from bitnami.

memcached:
  enabled: true

If the built in cache should not be used simply configure the cache in gitea.config.

gitea:
  config:
    cache:
      ENABLED: true
      ADAPTER: memory
      INTERVAL: 60
      HOST: 127.0.0.1:9090

Persistence

Gitea will be deployed as a statefulset. By simply enabling the persistence and setting the storage class according to your cluster everything else will be taken care of. The following example will create a PVC as a part of the statefulset. This PVC will not be deleted even if you uninstall the chart.

Please note, that an empty storageClass in the persistence will result in kubernetes using your default storage class.

If you want to use your own storageClass define it as followed:

persistence:
  enabled: true
  storageClass: myOwnStorageClass

When using PostgreSQL as dependency, this will also be deployed as a statefulset by default.

If you want to manage your own PVC you can simply pass the PVC name to the chart.

  persistence:
    enabled: true
    existingClaim: MyAwesomeGiteaClaim

In case that peristence has been disabled it will simply use an empty dir volume.

PostgreSQL handles the persistence in the exact same way. You can interact with the postgres settings as displayed in the following example:

  postgresql:
    persistence:
      enabled: true
      existingClaim: MyAwesomeGiteaPostgresClaim

MySQL also handles persistence the same, even though it is not deployed as a statefulset. You can interact with the postgres settings as displayed in the following example:

  mysql:
    persistence:
      enabled: true
      existingClaim: MyAwesomeGiteaMysqlClaim

Admin User

This chart enables you to create a default admin user. It is also possible to update the password for this user by upgrading or redeloying the chart. It is not possible to delete an admin user after it has been created. This has to be done in the ui. You cannot use admin as username.

  gitea:
    admin:
      username: "MyAwesomeGiteaAdmin"
      password: "AReallyAwesomeGiteaPassword"
      email: "gi@tea.com"

You can also use an existing Secret to configure the admin user:

apiVersion: v1
kind: Secret
metadata:
  name: gitea-admin-secret
type: Opaque
stringData:
  username: MyAwesomeGiteaAdmin
  password: AReallyAwesomeGiteaPassword

gitea:
    admin:
      existingSecret: gitea-admin-secret

LDAP Settings

Like the admin user the LDAP settings can be updated. All LDAP values from https://docs.gitea.io/en-us/command-line/#admin are available.

Multiple LDAP sources can be configured with additional LDAP list items.

  gitea:
    ldap:
      - name: MyAwesomeGiteaLdap
        securityProtocol: unencrypted
        host: "127.0.0.1"
        port: "389"
        userSearchBase: ou=Users,dc=example,dc=com
        userFilter: sAMAccountName=%s
        adminFilter: CN=Admin,CN=Group,DC=example,DC=com
        emailAttribute: mail
        bindDn: CN=ldap read,OU=Spezial,DC=example,DC=com
        bindPassword: JustAnotherBindPw
        usernameAttribute: CN
        publicSSHKeyAttribute: publicSSHKey

You can also use an existing secret to set the bindDn and bindPassword:

apiVersion: v1
kind: Secret
metadata:
  name: gitea-ldap-secret
type: Opaque
stringData:
  bindDn: CN=ldap read,OU=Spezial,DC=example,DC=com
  bindPassword: JustAnotherBindPw

gitea:
    ldap:
      - existingSecret: gitea-ldap-secret
        ...

⚠️ Some options are just flags and therefore don't have any values. If they are defined in gitea.ldap configuration, they will be passed to the Gitea CLI without any value. Affected options:

• notActive
• skipTlsVerify
• allowDeactivateAll
• synchronizeUsers
• attributesInBind

OAuth2 Settings

Like the admin user, OAuth2 settings can be updated and disabled but not deleted. Deleting OAuth2 settings has to be done in the ui. All OAuth2 values, which are documented here, are available.

Multiple OAuth2 sources can be configured with additional OAuth list items.

gitea:
  oauth:
    - name: 'MyAwesomeGiteaOAuth'
      provider: 'openidConnect'
      key: 'hello'
      secret: 'world'
      autoDiscoverUrl: 'https://gitea.example.com/.well-known/openid-configuration'
      #useCustomUrls:
      #customAuthUrl:
      #customTokenUrl:
      #customProfileUrl:
      #customEmailUrl:

You can also use an existing secret to set the key and secret:

apiVersion: v1
kind: Secret
metadata:
  name: gitea-oauth-secret
type: Opaque
stringData:
  key: hello
  secret: world

gitea:
  oauth:
    - name: 'MyAwesomeGiteaOAuth'
      existingSecret: gitea-oauth-secret
        ...

Configure commit signing

When using the rootless image the gpg key folder is not persistent by default. If you consider using signed commits for internal Gitea activities (e.g. initial commit), you'd need to provide a signing key. Prior to PR186, imported keys had to be re-imported once the container got replaced by another.

The mentioned PR introduced a new configuration object signing allowing you to configure prerequisites for commit signing. By default this section is disabled to maintain backwards compatibility.

signing:
  enabled: false
  gpgHome: /data/git/.gnupg

Regardless of the used container image the signing object allows to specify a private gpg key. Either using the signing.privateKey to define the key inline, or refer to an existing secret containing the key data by using signing.existingKey.

apiVersion: v1
kind: Secret
metadata:
  name: custom-gitea-gpg-key
type: Opaque
stringData:
  privateKey: |-
    -----BEGIN PGP PRIVATE KEY BLOCK-----
    ...
    -----END PGP PRIVATE KEY BLOCK-----    

signing:
  existingSecret: custom-gitea-gpg-key

To use the gpg key, Gitea needs to be configured accordingly. A detailed description can be found in the official Gitea documentation.

Metrics and profiling

A Prometheus /metrics endpoint on the HTTP_PORT and pprof profiling endpoints on port 6060 can be enabled under gitea. Beware that the metrics endpoint is exposed via the ingress, manage access using ingress annotations for example.

To deploy the ServiceMonitor, you first need to ensure that you have deployed prometheus-operator and its CRDs.

gitea:
  metrics:
    enabled: true
    serviceMonitor:
      enabled: true

  config:
    server:
      ENABLE_PPROF: true

Pod Annotations

Annotations can be added to the Gitea pod.

gitea:
  podAnnotations: {}

Parameters

Global

Name	Description	Value
global.imageRegistry	global image registry override	""
global.imagePullSecrets	global image pull secrets override; can be extended by imagePullSecrets	[]
global.storageClass	global storage class override	""
global.hostAliases	global hostAliases which will be added to the pod's hosts files	[]
replicaCount	number of replicas for the statefulset	1
clusterDomain	cluster domain	cluster.local

Image

Name	Description	Value
image.registry	image registry, e.g. gcr.io,docker.io	""
image.repository	Image to start for this pod	gitea/gitea
image.tag	Visit: Image tag. Defaults to appVersion within Chart.yaml.	""
image.pullPolicy	Image pull policy	Always
image.rootless	Wether or not to pull the rootless version of Gitea, only works on Gitea 1.14.x or higher	false
imagePullSecrets	Secret to use for pulling the image	[]

Security

Name	Description	Value
podSecurityContext.fsGroup	Set the shared file system group for all containers in the pod.	1000
containerSecurityContext	Security context	{}
securityContext	Run init and Gitea containers as a specific securityContext	{}

Service

Name	Description	Value
service.http.type	Kubernetes service type for web traffic	ClusterIP
service.http.port	Port number for web traffic	3000
service.http.clusterIP	ClusterIP setting for http autosetup for statefulset is None	None
service.http.loadBalancerIP	LoadBalancer IP setting	nil
service.http.nodePort	NodePort for http service	nil
service.http.externalTrafficPolicy	If service.http.type is NodePort or LoadBalancer, set this to Local to enable source IP preservation	nil
service.http.externalIPs	External IPs for service	nil
service.http.ipFamilyPolicy	HTTP service dual-stack policy	nil
service.http.ipFamilies	HTTP service dual-stack familiy selection,for dual-stack parameters see official kubernetes dual-stack concept documentation.	nil
service.http.loadBalancerSourceRanges	Source range filter for http loadbalancer	[]
service.http.annotations	HTTP service annotations	{}
service.ssh.type	Kubernetes service type for ssh traffic	ClusterIP
service.ssh.port	Port number for ssh traffic	22
service.ssh.clusterIP	ClusterIP setting for ssh autosetup for statefulset is None	None
service.ssh.loadBalancerIP	LoadBalancer IP setting	nil
service.ssh.nodePort	NodePort for ssh service	nil
service.ssh.externalTrafficPolicy	If service.ssh.type is NodePort or LoadBalancer, set this to Local to enable source IP preservation	nil
service.ssh.externalIPs	External IPs for service	nil
service.ssh.ipFamilyPolicy	SSH service dual-stack policy	nil
service.ssh.ipFamilies	SSH service dual-stack familiy selection,for dual-stack parameters see official kubernetes dual-stack concept documentation.	nil
service.ssh.hostPort	HostPort for ssh service	nil
service.ssh.loadBalancerSourceRanges	Source range filter for ssh loadbalancer	[]
service.ssh.annotations	SSH service annotations	{}

Ingress

Name	Description	Value
ingress.enabled	Enable ingress	false
ingress.className	Ingress class name	nil
ingress.annotations	Ingress annotations	{}
ingress.hosts[0].host	Default Ingress host	git.example.com
ingress.hosts[0].paths[0].path	Default Ingress path	/
ingress.hosts[0].paths[0].pathType	Ingress path type	Prefix
ingress.tls	Ingress tls settings	[]
ingress.apiVersion	Specify APIVersion of ingress object. Mostly would only be used for argocd.

StatefulSet

Name	Description	Value
resources	Kubernetes resources	{}
schedulerName	Use an alternate scheduler, e.g. "stork"	""
nodeSelector	NodeSelector for the statefulset	{}
tolerations	Tolerations for the statefulset	[]
affinity	Affinity for the statefulset	{}
dnsConfig	dnsConfig for the statefulset	{}
statefulset.env	Additional environment variables to pass to containers	[]
statefulset.terminationGracePeriodSeconds	How long to wait until forcefully kill the pod	60
statefulset.labels	Labels for the statefulset	{}
statefulset.annotations	Annotations for the Gitea StatefulSet to be created	{}

Persistence

Name	Description	Value
persistence.enabled	Enable persistent storage	true
persistence.existingClaim	Use an existing claim to store repository information	nil
persistence.size	Size for persistence to store repo information	10Gi
persistence.accessModes	AccessMode for persistence	["ReadWriteOnce"]
persistence.labels	Labels for the persistence volume claim to be created	{}
persistence.annotations	Annotations for the persistence volume claim to be created	{}
persistence.storageClass	Name of the storage class to use	nil
persistence.subPath	Subdirectory of the volume to mount at	nil
extraVolumes	Additional volumes to mount to the Gitea statefulset	[]
extraContainerVolumeMounts	Mounts that are only mapped into the Gitea runtime/main container, to e.g. override custom templates.	[]
extraInitVolumeMounts	Mounts that are only mapped into the init-containers. Can be used for additional preconfiguration.	[]
extraVolumeMounts	DEPRECATED Additional volume mounts for init containers and the Gitea main container	[]

Init

Name	Description	Value
initPreScript	Bash shell script copied verbatim to the start of the init-container.	""

Signing

Name	Description	Value
signing.enabled	Enable commit/action signing	false
signing.gpgHome	GPG home directory	/data/git/.gnupg
signing.privateKey	Inline private gpg key for signed Gitea actions	""
signing.existingSecret	Use an existing secret to store the value of signing.privateKey	""

Gitea

Name	Description	Value
gitea.admin.username	Username for the Gitea admin user	gitea_admin
gitea.admin.existingSecret	Use an existing secret to store admin user credentials	nil
gitea.admin.password	Password for the Gitea admin user	r8sA8CPHD9!bt6d
gitea.admin.email	Email for the Gitea admin user	gitea@local.domain
gitea.metrics.enabled	Enable Gitea metrics	false
gitea.metrics.serviceMonitor.enabled	Enable Gitea metrics service monitor	false
gitea.ldap	LDAP configuration	[]
gitea.oauth	OAuth configuration	[]
gitea.config	Configuration for the Gitea server,ref: config-cheat-sheet	{}
gitea.additionalConfigSources	Additional configuration from secret or configmap	[]
gitea.additionalConfigFromEnvs	Additional configuration sources from environment variables	[]
gitea.podAnnotations	Annotations for the Gitea pod	{}

LivenessProbe

Name	Description	Value
gitea.livenessProbe.enabled	Enable liveness probe	true
gitea.livenessProbe.tcpSocket.port	Port to probe for liveness	http
gitea.livenessProbe.initialDelaySeconds	Initial delay before liveness probe is initiated	200
gitea.livenessProbe.timeoutSeconds	Timeout for liveness probe	1
gitea.livenessProbe.periodSeconds	Period for liveness probe	10
gitea.livenessProbe.successThreshold	Success threshold for liveness probe	1
gitea.livenessProbe.failureThreshold	Failure threshold for liveness probe	10

ReadinessProbe

Name	Description	Value
gitea.readinessProbe.enabled	Enable readiness probe	true
gitea.readinessProbe.tcpSocket.port	Port to probe for readiness	http
gitea.readinessProbe.initialDelaySeconds	Initial delay before readiness probe is initiated	5
gitea.readinessProbe.timeoutSeconds	Timeout for readiness probe	1
gitea.readinessProbe.periodSeconds	Period for readiness probe	10
gitea.readinessProbe.successThreshold	Success threshold for readiness probe	1
gitea.readinessProbe.failureThreshold	Failure threshold for readiness probe	3

StartupProbe

Name	Description	Value
gitea.startupProbe.enabled	Enable startup probe	false
gitea.startupProbe.tcpSocket.port	Port to probe for startup	http
gitea.startupProbe.initialDelaySeconds	Initial delay before startup probe is initiated	60
gitea.startupProbe.timeoutSeconds	Timeout for startup probe	1
gitea.startupProbe.periodSeconds	Period for startup probe	10
gitea.startupProbe.successThreshold	Success threshold for startup probe	1
gitea.startupProbe.failureThreshold	Failure threshold for startup probe	10

Memcached

Name	Description	Value
memcached.enabled	Memcached is loaded as a dependency from Bitnami if enabled in the values. Complete Configuration can be taken from their website.	true
memcached.service.port	Port for Memcached	11211

PostgreSQL

Name	Description	Value
postgresql.enabled	Enable PostgreSQL	true
postgresql.global.postgresql.postgresqlDatabase	PostgreSQL database (overrides postgresqlDatabase)	gitea
postgresql.global.postgresql.postgresqlUsername	PostgreSQL username (overrides postgresqlUsername)	gitea
postgresql.global.postgresql.postgresqlPassword	PostgreSQL admin password (overrides postgresqlPassword)	gitea
postgresql.global.postgresql.servicePort	PostgreSQL port (overrides service.port)	5432
postgresql.persistence.size	PVC Storage Request for PostgreSQL volume	10Gi

MySQL

Name	Description	Value
mysql.enabled	Enable MySQL	false
mysql.root.password	Password for the root user. Ignored if existing secret is provided	gitea
mysql.db.user	Username of new user to create.	gitea
mysql.db.password	Password for the new user.Ignored if existing secret is provided	gitea
mysql.db.name	Name for new database to create.	gitea
mysql.service.port	Port to connect to MySQL service	3306
mysql.persistence.size	PVC Storage Request for MySQL volume	10Gi

MariaDB

Name	Description	Value
mariadb.enabled	Enable MariaDB	false
mariadb.auth.database	Name of the database to create.	gitea
mariadb.auth.username	Username of the new user to create.	gitea
mariadb.auth.password	Password for the new user. Ignored if existing secret is provided	gitea
mariadb.auth.rootPassword	Password for the root user.	gitea
mariadb.primary.service.port	Port to connect to MariaDB service	3306
mariadb.primary.persistence.size	Persistence size for MariaDB	10Gi

Advanced

Name	Description	Value
checkDeprecation	Set it to false to skip this basic validation check.	true

Contributing

Expected workflow is: Fork -> Patch -> Push -> Pull Request

See CONTRIBUTORS GUIDE for details.

Upgrading

This section lists major and breaking changes of each Helm Chart version. Please read them carefully to upgrade successfully.

To 7.0.0

Gitea 1.18.1

This Chart version updates Gitea to 1.18.1. Don't miss any application related breaking changes of 1.18.0.

Private GPG key configuration for Gitea signing actions

Having signing.enabled=true now requires to use either signing.privateKey or signing.existingSecret so that the Chart can automatically prepare the GPG key for Gitea internal signing actions. See Configure commit signing for details.

To 6.0.0

Different volume mounts for init-containers and runtime container

The extraVolumeMounts is deprecated in favor of extraInitVolumeMounts and extraContainerVolumeMounts. You can now have different mounts for the initialization phase and Gitea runtime. The deprecated extraVolumeMounts will still be available for the time being and is mounted into every container. If you want to switch to the new settings and want to mount specific volumes into all containers, you have to configure their mount points within both new settings.

Combining values from the deprecated setting with values from the new settings is not possible.

New enabled flag for startupProbe

Prior to this version the startupProbe was just a commented sample within the values.yaml. With the migration to an auto-generated Parameters section, a new parameter gitea.startupProbe.enabled has been introduced set to false by default.

If you are using the startupProbe you need to add that new parameter and set it to true. Otherwise, your defined probe won't be considered after the upgrade.

To 5.0.0

💥 The Helm Chart now requires Gitea versions of at least 1.11.0.

Enable Dependencies

The values to enable the dependencies, such as PostgreSQL, Memcached, MySQL and MariaDB have been moved from gitea.database.builtIn. to the dependency values.

You can now enable the dependencies as followed:

memcached:
  enabled: true

postgresql:
  enabled: true

mysql:
  enabled: false

mariadb:
  enabled: false

App.ini generation

The app.ini generation has changed and now utilizes the environment-to-ini script provided by newer Gitea versions. This change ensures, that the app.ini is now persistent.

Secret Key generation

Gitea secret keys (SECRET_KEY, INTERNAL_TOKEN, JWT_SECRET) are now generated automatically in certain situations:

• New install: By default the secrets are created automatically. If you provide secrets via gitea.config they will be used instead of automatic generation.
• Existing installs: The secrets won't be deployed, neither via configuration nor via auto generation. We explicitly prevent to set new secrets.

💡 It would be possible to set new secret keys manually by entering the running container and rewriting the app.ini by hand. However, this it is not advisable to do so for existing installations. Certain settings like LDAP would not be readable anymore.

Probes

gitea.customLivenessProbe, gitea.customReadinessProbe and gitea.customStartupProbe have been removed.

They are replaced by the settings gitea.livenessProbe, gitea.readinessProbe and gitea.startupProbe which are now fully configurable and used as-is for a Chart deployment. If you have customized their values instead of using the custom prefixed settings, please ensure that you remove the enabled property from each of them.

In case you want to disable one of these probes, let's say the livenessProbe, add the following to your values. The podAnnotation is just there to have a bit more context.

gitea:
+ livenessProbe:
  podAnnotations: {}

Multiple OAuth and LDAP authentication sources

With 5.0.0 of this Chart it is now possible to configure Gitea with multiple OAuth and LDAP sources. As a result, you need to update an existing OAuth/LDAP configuration in your customized values.yaml by replacing the object with settings to a list of settings objects. See OAuth2 Settings and LDAP Settings section for details.

To 4.0.0

Ingress changes

To provide a more flexible Ingress configuration we now support not only host settings but also provide configuration for the path and pathType. So this change changes the hosts from a simple string list, to a list containing a more complex object for more configuration.

ingress:
  enabled: false
  annotations: {}
    # kubernetes.io/ingress.class: nginx
    # kubernetes.io/tls-acme: "true"
-  hosts:
-    - git.example.com
+  hosts:
+    - host: git.example.com
+      paths:
+        - path: /
+          pathType: Prefix
  tls: []
  #  - secretName: chart-example-tls
  #    hosts:
  #      - git.example.com

If you want everything as it was before, you can simply add the following code to all your host entries.

paths:
  - path: /
    pathType: Prefix

Dropped kebab-case support

In 3.x.x it was possible to provide an ldap configuration via kebab-case, this support has now been dropped and only camel case is supported. See LDAP section for more information.

Dependency update

The chart comes with multiple databases and Memcached as dependency, the latest release updated the dependencies.

• Memcached: 4.2.20 -> 5.9.0
• PostgreSQL: 9.7.2 -> 10.3.17
• MariaDB: 8.0.0 -> 9.3.6

If you're using the builtin databases you will most likely redeploy the chart in order to update the database correctly.

Execution of initPreScript

Generally spoken, this might not be a breaking change, but it is worth to be mentioned.

Prior to 4.0.0 only one init container was used to both setup directories and configure Gitea. As of now the actual Gitea configuration is separated from the other pre-execution. This also includes the execution of initPreScript. If you have such script, please be aware of this. Dynamically prepare the Gitea setup during execution by e.g. adding environment variables to the execution context won't work anymore.

Misc

Gitea Version 1.14.X repository ROOT

Previously the ROOT folder for the Gitea repositories was located at /data/git/gitea-repositories. In version 1.14 has the path been changed to /data/gitea-repositories.

This chart will set the gitea.config.repository.ROOT value default to /data/git/gitea-repositories.