### Description of the change
Introducing `tpl` function on variables related to hostname in `./templates/gitea/ingress.yaml`
### Benefits
The change is intending to support the following syntax in a values.yaml such as:
```
global:
giteaHostName: "gitea.my-org.com"
ingress:
enabled: true
hosts:
- host: "{{ .Values.global.giteaHostName }}"
paths:
- path: /
pathType: Prefix
tls:
- secretName: gitea-tls
hosts:
- "{{ .Values.global.giteaHostName }}"
```
### Possible drawbacks
N/A
### Applicable issues
N/A
### Additional information
N/A
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/498
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.com>
Co-authored-by: Ceddaerrix <ceddaerrix@noreply.gitea.com>
Co-committed-by: Ceddaerrix <ceddaerrix@noreply.gitea.com>
### Benefits
Asserting the value existence failed previously.
### Applicable issues
fixes#488
### Additional information
No unit tests possible as value is parsed as a secret and then into `app.ini`.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/490
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.com>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
Before only `postgresql-ha` was auto-configured WRT to DNS.
### Benefits
Add DNS auto-config for `postgresql` dependency and assert that either `postgresql` or `postgresql-ha` is enabled.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/478
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
<!--
Before you open the request please review the following guidelines and tips to help it be more easily integrated:
- Describe the scope of your change - i.e. what the change does.
- Describe any known limitations with your change.
- Please run any tests or examples that can exercise your modified code.
Thank you for contributing! We will try to review, test and integrate the change as soon as we can.
-->
### Description of the change
<!-- Describe the scope of your change - i.e. what the change does. -->
remove deployment, `serviceName`
### Benefits
<!-- What benefits will be realized by the code change? -->
### Possible drawbacks
<!-- Describe any known limitations with your change -->
### Applicable issues
<!-- Enter any applicable Issues here (You can reference an issue using #). Please remove this section if there is no referenced issue. -->
- fixes#466
### Additional information
<!-- If there's anything else that's important and relevant to your pull request, mention that information here. Please remove this section if it remains empty. -->
### ⚠ BREAKING
<!-- If there's a breaking change, please shortly describe in which way users are affected and how they can mitigate it. If there are no breakings, please remove this section. -->
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [x] Breaking changes are documented in the `README.md`
- [x] Templating unittests are added
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/467
Co-authored-by: yinheli <me@yinheli.com>
Co-committed-by: yinheli <me@yinheli.com>
# Changes
A big shoutout to @luhahn for all his work in #205 which served as the base for this PR.
## Documentation
- [x] After thinking for some time about it, I still prefer the distinct option (as started in #350), i.e. having a standalone "HA" doc under `docs/ha-setup.md` to not have a very long README (which is already quite long).
Most of the information below should go into it with more details and explanations behind all of the individual components.
## Chart deps
~~- Adds `meilisearch` as a chart dependency for a HA-ready issue indexer. Only works with >= Gitea 1.20~~
~~- Adds `redis` as a chart dependency for a HA-ready session and queue store.~~
- Adds `redis-cluster` as a chart dependency for a HA-ready session and queue store (alternative to `redis`). Only works with >= Gitea 1.19.2.
- Removes `memcached` instead of `redis-cluster`
- Add `postgresql-ha` as default DB dep in favor of `postgres`
## Adds smart HA chart logic
The goal is to set smart config values that result in a HA-ready Gitea deployment if `replicaCount` > 1.
- If `replicaCount` > 1,
- `gitea.config.session.PROVIDER` is automatically set to `redis-cluster`
- `gitea.config.indexer.REPO_INDEXER_ENABLED` is automatically set to `false` unless the value is `elasticsearch` or `meilisearch`
- `redis-cluster` is used for `[queue]` and `[cache]` and `[session]`mode or not
Configuration of external instances of `meilisearch` and `minio` are documented in a new markdown doc.
## Deployment vs Statefulset
Given all the discussions about this lately (#428), I think we could use both.
In the end, we do not have the requirement for a sequential pod scale up/scale down as it would happen in statefulsets.
On the other side, we do not have actual stateless pods as we are attaching a RWX to the deployment.
Yet I think because we do not have a leader-election requirement, spawning the pods as a deployment makes "Rolling Updates" easier and also signals users that there is no "leader election" logic and each pod can just be "destroyed" at anytime without causing interruption.
Hence I think we should be able to switch from a statefulset to a deployment, even in the single-replica case.
This change also brought up a templating/linting issue: the definition of `.Values.gitea.config.server.SSH_LISTEN_PORT` in `ssh-svc.yaml` just "luckily" worked so far due to naming-related lint processing. Due to the change from "statefulset" to "deployment", the processing queue changed and caused a failure complaining about `config.server.SSH_LISTEN_PORT` not being defined yet.
The only way I could see to fix this was to "properly" define the value in `values.yaml` instead of conditionally definining it in `helpers.tpl`. Maybe there's a better way?
## Chart PVC Creation
I've adapted the automated PVC creation from another chart to be able to provide the `storageClassName` as I couldn't get dynamic provisioning for EFS going with the current implementation.
In addition the naming and approach within the Gitea chart for PV creation is a bit unusual and aligning it might be beneficial.
A semi-unrelated change which will result in a breaking change for existing users but this PR includes a lot of breaking changes already, so including another one might not make it much worse...
- New `persistence.mount`: whether to mount an existing PVC (via `persistence.existingClaim`
- New `persistence.create`: whether to create a new PVC
## Testing
As this PR does a lot of things, we need proper testing.
The helm chart can be installed from the Git branch via `helm-git` as follows:
```
helm repo add gitea-charts git+https://gitea.com/gitea/helm-chart@/?ref=deployment
helm install gitea --version 0.0.0
```
It is **highly recommended** to test the chart in a dedicated namespace.
I've tested this myself with both `redis` and `redis-cluster` and it seemed to work fine.
I just did some basic operations though and we should do more niche testing before merging.
Examplary `values.yml` for testing (only needs a valid RWX storage class):
<details>
<summary>values.yaml</summary>
```yml
image:
tag: "dev"
PullPolicy: "Always"
rootless: true
replicaCount: 2
persistence:
enabled: true
accessModes:
- ReadWriteMany
storageClass: FIXME
redis-cluster:
enabled: false
global:
redis:
password: gitea
gitea:
config:
indexer:
ISSUE_INDEXER_ENABLED: true
REPO_INDEXER_ENABLED: false
```
</details>
## Preferred setup
The preferred HA setup with respect to performance and stability might currently be as follows:
- Repos: RWX (e.g. EFS or Azurefiles NFS)
- Issue indexer: Meilisearch (HA)
- Session and cache: Redis Cluster (HA)
- Attachments/Avatars: Minio (HA)
This will result in a ~ 10-pod HA setup overall.
All pods have very low resource requests.
fix#98
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/437
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
Change env-to-ini prefix and remove custom prefix.
`GITEA` is the default prefix.
### Benefits
Compatibility wit v1.20 (`-p` got removed)
### Possible drawbacks
None
### Additional information
See https://github.com/go-gitea/gitea/pull/25799
Tested with Gitea < 1.20 and >= 1.20
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/464
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
This adds a new values object `serviceAccount`, that allows creating a dedicated ServiceAccount with the Helm Release into the cluster. It supports all common options like labels, annotations, name override (or referring to an externally created ServiceAccount), auto-mount token, image pull secrets.
It supersedes the stale PR #357.
### Benefits
Users can deploy Gitea with more fine-tuned security settings.
### Applicable issues
- related to #448
### Additional information
I've bumped the helm-unittest plugin in the CI build, to be able to use the `exists` and `notExists` feature in the new tests.
### Checklist
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/451
Reviewed-by: pat-s <pat-s@noreply.gitea.com>
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Co-committed-by: justusbunsi <sk.bunsenbrenner@gmail.com>
fix#396
Set the default of `$HOME` to `/data/gitea/git` for rootless images to make chart openshift compliant.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/447
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
Signed-off-by: Cyril Jouve <jv.cyril@gmail.com>
<!--
Before you open the request please review the following guidelines and tips to help it be more easily integrated:
- Describe the scope of your change - i.e. what the change does.
- Describe any known limitations with your change.
- Please run any tests or examples that can exercise your modified code.
Thank you for contributing! We will try to review, test and integrate the change as soon as we can.
-->
### Description of the change
<!-- Describe the scope of your change - i.e. what the change does. -->
add a new value `extraDeploy` to add arbitrary resources
inspired by bitnami charts ([example](https://github.com/bitnami/charts/blob/main/bitnami/postgresql/values.yaml#L58)
### Benefits
<!-- What benefits will be realized by the code change? -->
with the change, I can deploy additional resources and keep them consistent with the chart (reuse macro, same labels, etc)., same workflow (helm upgrade), etc
### Possible drawbacks
<!-- Describe any known limitations with your change -->
### Additional information
<!-- If there's anything else that's important and relevant to your pull request, mention that information here. Please remove this section if it remains empty. -->
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/441
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: Cyril Jouve <jv.cyril@gmail.com>
Co-committed-by: Cyril Jouve <jv.cyril@gmail.com>
Supersedes stalled #362
I opted for defining `requests` while leaving `limits` open. This might help for scheduling without restricting performance during init.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/423
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
Fix a wrong reference to `signing.existingKey`, `signing.existingSecret` was what was meant and what is used in the chart.
### Benefits
Less confusion when trying to use the Helm chart.
### Possible drawbacks
Evangelists of `existingKey` storming the barricades even though `existingKey` is long dead.
### Applicable issues
None, nobody noticed enough to care, apparently.
Co-authored-by: Tobias Wolter <towo@towo.eu>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/415
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: towo <towo@noreply.gitea.io>
Co-committed-by: towo <towo@noreply.gitea.io>
### Description of the change
It is required to add custom mapping between hostnames and IP addresses for the gitea pods to be able to access external services like oauth providers or webhook servers.
It is common to take global variables for the entires and set them using hostAliases in the pod template.
### Benefits
Give us more flexibility when using gitea in various network environments.
### Applicable issues
- fixes#400
### Checklist
- [X] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Co-authored-by: Taekyun Kim <tkq.kim@samsung.com>
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/401
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: podain77 <podain77@noreply.gitea.io>
Co-committed-by: podain77 <podain77@noreply.gitea.io>
This reverts d5ce1a47ea and therefore adds the GPG feature back into main.
As it is a breaking change, this PR now also contains the required upgrade notes.
Closes#107 again.
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/374
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: John Olheiser <john+gitea@jolheiser.com>
Feature #343 happens to be a breaking change when enabling `.Values.signing` but not specifying
any of the new private key properties. Tag `v6.0.2` is therefore not following semantic versioning.
This temporarily reverts commit b8f0310c43 and a fix-up commit 57a1cd27d9
to retag 6.0.2 as 6.0.3.
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/373
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
### Description of the change
The init container for gpg key import doesn´t work. There is a not a tty error.
### Benefits
This will run gpg in batch mode. Eliminating the tty error.
### Possible drawbacks
None that I can think off.
### Applicable issues
- fixes#370
### Checklist
- [X] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [X] Breaking changes are documented in the `README.md`
Co-authored-by: Jeroen Verhoeven <jeroen@joentje.org>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/371
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: dajoen74 <dajoen74@noreply.gitea.io>
Co-committed-by: dajoen74 <dajoen74@noreply.gitea.io>
### Description of the change
This PR adds support for gpg key setup. It allows to pass the gpg private key content inline inside `values.yaml` or refer to an existing secret containing the key content data.
### Benefits
Administrators don't need to manually setup the gpg environment from inside a running container. It also eliminates the breaking change of Gitea 1.17 regarding `[git].HOME` as the `GNUPGHOME` environment variable is used consistently to relocate the `.gnupg` directory to its former location.
### Applicable issues
- fixes#107
### Additional information
This PR add the first unit tests to this Helm Chart, ensuring templating integrity for signing related configuration.
### Checklist
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/343
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
### Description of the change
Checking the existence of the config directory should be done with the directory path itself. Not its parent directory.
This simple fix addresses that by using the config directory for its existence check.
### Benefits
Prior to #337 there was no other way to install this helm chart using the `extraVolumeMounts` setting with these values:
```yaml
replicaCount: %d
extraVolumes:
- name: config-volume
configMap:
name: %s
extraVolumeMounts:
- name: config-volume
mountPath: /data/gitea/templates/custom
```
Without this fix, the Gitea pod would never initialize, and would crashloop with the same error in #296.
### Additional information
Mounting a configMap to `/data/gitea/templates/custom` causes the `/data/gitea` folder to exist even though the `/data/gitea/conf` had not been initialized yet. The initialization script saw that the `/data/gitea` dir existed and exited early without initializing `/data/gitea/conf`.
Co-authored-by: cboin1996 <christianboin@hotmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/310
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Co-authored-by: cboin1996 <cboin1996@noreply.gitea.io>
Co-committed-by: cboin1996 <cboin1996@noreply.gitea.io>
Description of the change
Add support for a new value: dnsConfig, to be passed to the statefulset pod template configuration.
Default is {}, and does not change anything from current default pod configuration.
Benefits
Ability to fix some issues encountered with Alpine-based docker images, which may break DNS resolving on some clusters.
In particular, this allows to lower the ndots value, which fixes DNS resolving of FQDNs.
dnsConfig:
options:
- name: ndots
value: "1"
Also, with this setting, one can set other parameters to finely tune DNS configuration for Gitea pods, if needed:
https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/#pod-dns-config
Possible drawbacks
None.
Additional information
Some relevant links about the issue this setting allows to fix:
https://stackoverflow.com/questions/65181012/does-alpine-have-known-dns-issue-within-kuberneteshttps://gitlab.alpinelinux.org/alpine/aports/-/issues/9017
Checklist
Parameters are documented in the values.yaml and added to the README.md using readme-generator-for-helm
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/329
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Co-authored-by: dek <dek@noreply.gitea.io>
Co-committed-by: dek <dek@noreply.gitea.io>
To enable access to e.g. the SSH port by IPv6, the selection of ipFamilyPolicy and ipFamilies service attributes is necessary. Enable the possibility to configure these by helm values.
Co-authored-by: Sven Fischer <sven@leiderfischer.de>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/313
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Co-authored-by: svenihoney <svenihoney@noreply.gitea.io>
Co-committed-by: svenihoney <svenihoney@noreply.gitea.io>
The default behaviour for container image pulls depend on different values
such as image tag usage and its value.
See https://kubernetes.io/docs/concepts/containers/images/#imagepullpolicy-defaulting
It leads to an unintended behaviour for this Helm Chart. Kubernetes
will always pull the image for init containers when using the `latest`
Gitea image tag, even if `Values.image.pullPolicy` defines a different
value for the runtime container.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/317
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Reviewed-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Fixes#314
Right now, the gitea StatefulSet does not allow any annotations to be configured via the helmchart - see https://gitea.com/gitea/helm-chart/src/tag/v5.0.4/templates/gitea/statefulset.yaml#L4-L6
My use case:
I am trying to use Reloader (https://github.com/stakater/Reloader) so that I can configure my values.yaml such that i can set some annotations on the StatefulSet and thus Reloader can rollout a restart of gitea StatefulSet whenever a watched secret or configmap is updated.
Co-authored-by: Tarun Gupta Akirala <tarugupta.92@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/315
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: takirala <takirala@noreply.gitea.io>
Co-committed-by: takirala <takirala@noreply.gitea.io>
This PR improves the handling and injection into _app.ini_ of user defined environment variables via env-to-ini script.
Fixes#297
Co-authored-by: Lucas Hahn <lucas.hahn@novum-rgi.de>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/298
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: 6543 <6543@obermui.de>
This will remove the db connection check, which has caused some trouble in the past.
It will now simply run _gitea migrate_ and output a message, if the database is not available.
Co-authored-by: Lucas Hahn <lucas.hahn@novum-rgi.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/299
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: luhahn <luhahn@noreply.gitea.io>
Co-committed-by: luhahn <luhahn@noreply.gitea.io>
This fixes my feature request (#275) to support hostPort to expose the ssh port.
Co-authored-by: alex <alex@zengers.de>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/276
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: a-zen <a-zen@noreply.gitea.io>
Co-committed-by: a-zen <a-zen@noreply.gitea.io>
## Context
PR #259 introduced support for running Gitea as a uid different than 1000 (git) or 0 (root).
## Problem
In init_directory_structure.sh, there is a "chown 1000:1000" on /tmp/gitea.
This chown only works when running as root or when the target directory is already owned by uid 1000.
As a result, the init container "init-directories" fails on startup when running Gitea with a uid different from 0 or 1000.
Initially, I worked around it by implementing an "initPreScript". But it would make user's life easier if we can make it work out-of-the-box.
## Resolution
I'm taking model on the chown a few lines above that depends on the value of image.rootless. Since the chown only works on default (root) image and is useless on rootless image, there is no need to run it on rootless image.
Co-authored-by: Nicolas MASSE <nicolas.masse@itix.fr>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/266
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: nmasse-itix <nmasse-itix@noreply.gitea.io>
Co-committed-by: nmasse-itix <nmasse-itix@noreply.gitea.io>
With release 5.0.0 there are so many deprecations and breaking changes
that it is probably a good way to assist the users with values migration
before breaking their environments.
This adds another template file that doesn't render anything but ensures
the removal of dropped or deprecated settings from customized values
files.
For when it is necessary, this check can be disabled via new setting
`checkDeprecation`.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/269
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: wxiaoguang <wxiaoguang@noreply.gitea.io>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
With the result of PR #239 it is much easier to provide additional values to the _app.ini_ configuration from different sources.
These changes adds an _additionalConfigSources_ field where the users can define such sources. This enables the users to choose
on their own whether to store values in _values.yaml_ or load them from Kuberetes Secrets or ConfigMaps.
- Fixes#243
- Fixes#174
- Fixes#260
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/240
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: wxiaoguang <wxiaoguang@noreply.gitea.io>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
This change request includes two different things to improve OAuth source handling:
- Allow multiple OAuth source configuration (Fixes: #191)
- Support reading sensitive OAuth configuration data from Kubernetes secrets (Closes: #242)
⚠️ BREAKING ⚠️
---
Users need to migrate their `gitea.oauth` configuration.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/244
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
fixes#251
The rendering is a bit more programatic but the result is the same if you don't have an override. This makes the code a little easier at the end of the template, and slightly less easier to read at the beginning, which I think is a valid tradeoff.
Co-authored-by: Martyn Ranyard <m@rtyn.berlin>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/252
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Co-authored-by: iMartyn <imartyn@noreply.gitea.io>
Co-committed-by: iMartyn <imartyn@noreply.gitea.io>
Hello !
I'm using the new Helm chart (5.x) and I really like the new configuration mechanism. 👍
I would like to contribute the following enhancement.
## The problem I want to solve
I'm trying to deploy Gitea in a Kubernetes shared platform and I need to make sure each instance is running as a different user so that in case of container escape, the risk of data leak is minimized.
Additionally, on my platform (OpenShift), arbitrary users (such as uid 1000 for Gitea) are not allowed.
The current helm chart does not allow me to achieve this because:
- the container security context is configurable only for the main container. The security context of init containers cannot be specified.
- a fixed uid is hard coded
- a fixed fs group is hard coded
Also, the securityContext of a pod and the securityContext of a container do not accept the same options.
- https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.19/#podsecuritycontext-v1-core
- https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.19/#securitycontext-v1-core
## How I'm solving the problem
I split the `securityContext` (values.yaml) in two: `containerSecurityContext` and `podSecurityContext`. The containerSecurityContext applies to all containers (init and main) in order to be consistent with file permissions.
The behavior for existing deployments is unchanged:
- fsGroup 1000 is the default value for the podSecurityContext variable
- the "configure-gitea" init container uses the uid 1000 unless otherwise stated in the containerSecurityContext
- the main container is using the existing securityContext variable when defined in order not to break existing deployments and uses the new containerSecurityContext variable if not.
This approach is well tested: it is used consistently on bitnami's Helm charts.
## How I tested
I tested both root and rootless variants on a Kubernetes 1.22, as well as rootless variant on OpenShift 4.7.
**rootless variant on Kubernetes**:
```yaml
podSecurityContext:
fsGroup: 10001
containerSecurityContext:
allowPrivilegeEscalation: false
capabilities:
drop:
- ALL
add:
- SYS_CHROOT
privileged: false
runAsGroup: 10001
runAsNonRoot: true
runAsUser: 10001
extraVolumes:
- name: var-lib-gitea
emptyDir: {}
extraVolumeMounts:
- name: var-lib-gitea
readOnly: false
mountPath: "/var/lib/gitea"
```
**rootless variant on OpenShift**:
```yaml
podSecurityContext:
fsGroup: null
containerSecurityContext:
allowPrivilegeEscalation: false
privileged: false
runAsNonRoot: true
runAsUser: 1000790000
extraVolumes:
- name: var-lib-gitea
emptyDir: {}
extraVolumeMounts:
- name: var-lib-gitea
readOnly: false
mountPath: "/var/lib/gitea"
```
Let me know if something is unclear.
Co-authored-by: Nicolas MASSE <nicolas.masse@itix.fr>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/259
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: nmasse-itix <nmasse-itix@noreply.gitea.io>
Co-committed-by: nmasse-itix <nmasse-itix@noreply.gitea.io>
As a replacement, the default probes are now fully configurable and used
as-is during Chart deployment.
Fixes: #189⚠️ BREAKING ⚠️
---
Users have to remove the `custom` prefix from their probes, if customized.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/248
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
App ini is now generated by environment-to-ini
This should prevent some of the problems we had earlier with persisting the app.ini
Co-authored-by: Lucas Hahn <lucas.hahn@novum-rgi.de>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/239
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: luhahn <luhahn@noreply.gitea.io>
Co-committed-by: luhahn <luhahn@noreply.gitea.io>
Add multiple add sources.
Instead of a single entry for ldap configuration we now would have a dictionary for ldap config.
This would be a breaking change for those working with the ldap config.
fixes: #190
Co-authored-by: Lucas Hahn <lucas.hahn@novum-rgi.de>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/222
Reviewed-by: Andrew Thornton <art27@cantab.net>
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: luhahn <luhahn@noreply.gitea.io>
Co-committed-by: luhahn <luhahn@noreply.gitea.io>
Hi,
I just add some minor changes to support specifying ingressClassName to support the newer specification in `networking.k8s.io/v1`. The annotation `kubernetes.io/ingress.class: nginx` only works with older API `networking.k8s.io/v1beta1`.
This is part of our move to support kubernetes 1.22.
Co-authored-by: Leong Wai Kit <waikit.leong@bertelsmann.de>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/217
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wkit23 <wkit23@noreply.gitea.io>
Co-committed-by: wkit23 <wkit23@noreply.gitea.io>
Currently there are two different styles for defining both ldap and oauth configuration in _values.yaml_ file: `camelCase` and `kebab-case`.
Supporting both styles created multiple regressions in the past.
⚠️ BREAKING ⚠️
---------------
These changes completely remove any support for `kebab-case` notation in _values.yaml_ in favor of `camelCase`. Configuration keys must use `camelCase`.
Only exception are Kubernetes resource keys for annotations or labels.
Fixes: #188
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/196
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
These changes rewrite the init script to be error aware, informative and have a bit more security awareness.
During rewrite several hidden bugs could be identified and fixed, such as:
- LDAP configuration options interpreted by the shell before passed to command
- Finding multiple ldap ids instead of one during lookup when their names are almost identical
e.g. `_my-ldap-auth` and `my-ldap-auth`
- Properly filter auth sources by their types to prevent unintended type converting attempts that fail
In addition to that the script is a bit cleaner. Some commands do not exist anymore and would cause false-positive errors during script execution.
Helps for: #149
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/178
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
In case a user did not specify DOMAIN in .Values.gitea.config.server,
the chart generated incorrect value for that app.ini setting so that
Gitea crashed on startup.
Same for ROOT_URL.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/185
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
